RESUMEN
In recent years, the demand for outdoor advertising and industrial display applications has been steadily increasing. Outdoor environments require higher brightness levels, thus requiring a reduction in the thermal resistance of the light source package. However, using secondary optical lenses to decrease the number of light sources is not a suitable solution because it may lead to the issue of lens detachment. Therefore, this paper proposes a packaging structure for wide heart-shaped angular light distribution mini-light emitting diodes (WHS mini-LEDs) with a primary optical design to enhance the light-emitting angle. The chips are directly bonded to an aluminum substrate using the metal eutectic process to minimize thermal resistance in the packaging. The experimental results indicated that the WHS mini-LED package had a total thermal resistance of 6.7â K/W. In a 55-inch backlight module (BLM), only 448 WHS mini-LEDs coupled with a quantum dot (QD) film and a brightness enhancement film (BEF) were required. Each lamp board was operated at 20.5â V and 5.5 A. The average luminance of the liquid crystal module (LCM) can reach 2234.2 cd/m2 with a uniformity of 90% and an NTSC value of 119.3%. This design offers a competitive advantage for outdoor advertising displays and industrial displays that require large areas, high brightness, and high color saturation.
RESUMEN
The light distribution of light-emitting diodes (LEDs) generally resembles that of a Lambertian light source. When used as large-area light sources, the light distribution angle of LEDs must be modified through secondary optics design to achieve uniformity and minimize the number of light sources. However, secondary optical components pose several challenges such as demanding alignment accuracy, material aging, detachment, and lower reliability. Therefore, this paper proposes a primary optical design approach to achieve full-angle emission in LEDs without the need for lenses. The design employs a flip-chip as the light source and incorporates a V-shaped packaged structure, including a white wall layer, optical structure layers, and a V-shaped diffuse structure. With this design, the LEDs achieve full-angle emission without relying on lenses. Our experimental results demonstrated a peak intensity angle of 77.7°, a 20.3% decrease in the intensity of the central point ratio, and a full width at half maximum (FWHM) of the light distribution of 175.5°. This design is particularly suitable for thin, large-area, and flexible backlight light sources. Moreover, the absence of secondary optical components allows for a thinner light source module.
RESUMEN
Ultraviolet B light-emitting diodes (UVB LEDs) hold promise in medical and agricultural applications. The commonly used sapphire substrate for their epitaxy growth possesses a high refractive index and excellent UV light absorption characteristics. However, this high refractive index can induce total internal reflection (TIR) within the substrate, leading to decreased Light Extraction Efficiency (LEE) due to light absorption within the material. In this study, UVB LED chips were detached from the sub-mount substrate and directly affixed onto an aluminum nitride (AlN) substrate with superior heat dissipation using a eutectic process. This was undertaken to diminish packaged thermal resistance (PTR). Simultaneously, optimization of the UVB LED packaging structure was employed to alleviate LEE losses caused by the TIR phenomenon, with the overarching goal of enhancin external quantum efficiency (EQE). The final experimental findings suggest that optimal LEE is achieved with packaging dimensions, including a length (ELL) of 2 mm, a width (ELW) of 1.62 mm, and a height (ELH) of 0.52 mm. At an input current of 200â mA, the output power reaches 50â mW, resulting in an EQE of 6.3%. Furthermore, the packaged thermal resistance from the chip to the substrate surface can be reduced to 4.615â K/W.
RESUMEN
Mini-light-emitting diode (Mini-LED) backlight units (BLUs) in combination with high dynamic range technology can reduce energy and ensure high contrast and luminance. However, the number of LEDs used in mini-LED BLUs is considerably larger than the number of partitions in local dimming, resulting in low cost effectiveness. We proposed a design combining edge-light mini-LEDs and light-guiding microstructure lenses to reduce the number of light sources required in displays considerably. A 16-inch prototype was produced for experiments. The length, width, and thickness of the liquid crystal display module were 351.87, 225.75, and 1.709 mm, respectively. For edge-light mini-LEDs with a pitch of 8.6 mm, the average luminance was 18,836 nits for an input power of 22.5 watts, the uniformity was 85%, the uniformity merit function was 10.13, and the contrast ratio was 60,000:1. Thus, a zero-optical-distance (ZOD) mini-LED backlight for extra-thin, large-area notebook LCDs was produced.