[Analysis of ultrasound images features and diagnostic model establishment of alveolar soft part sarcoma and intramuscular capillary-type hemangiomas].

Objective: The ultrasonography features of alveolar soft part sarcoma (ASPS) and intramuscular capillary-type hemangiomas (ICTH) were analyzed, and the diagnostic model of ASPS was established. Methods: A cross-sectional study was carried out. The clinical data of 52 patients [28 males and 24 females, aged (20.7±15.1) years] with pathologically confirmed ASPS and ICTH admitted to People's Hospital of Henan Province from January 2005 to February 2023 were included in the study. According to pathological types, the patients were divided into ASPS group and ICTH group. Clinical data of patients were retrospectively collected, and meaningful indicators in the univariate analysis were included in the regression analysis for screening. After comprehensive consideration of clinical significance and statistical significance, eligible indicators were selected for inclusion in the regression analysis. Binary logistic regression analysis was used to screen the factors that distinguished the pathological types of ASPS and ICTH, and the diagnostic model was established. The area under receiver operating characteristic (ROC) curve (AUC) was used to evaluate the diagnostic effectiveness of the diagnostic model in distinguishing ASPS from ICTH. Results: There were 20 patients in ASPS group, 10 males and 10 females, aged (26.9±13.5) years, and 32 patients in ICTH group, 18 males and 14 females, aged (16.8±15.0) years. The age difference between the ASPS group and the ICTH group was statistically significant (P<0.05), and there were statistically significant differences in the ultrasound imaging features of "clear boundary" "peripheral lobe" "thin blood vessels inside the lesion are straight and out of shape" "intra-lesion liquification" "peripheral thick blood vessels" and "peripheral muscle fiber disruption" between the two groups (all P<0.001).Variables with clinical and statistical significance were selected as independent variables. Binary logistic regression analysis showed that peripheral muscle fiber interruption (OR=97.358, 95%CI:6.833-1 387.249) and internal thin blood vessels were flat and out of shape (OR=0.052, 95%CI:0.003-0.921) was the correlation factor to distinguish the pathological types of ASPS and ICTH. Two ultrasonic image features of "peripheral muscle fiber interruption" and "internal thin blood vessels are straight and out of shape" were used to establish the diagnostic model. The sensitivity of "peripheral muscle fiber interruption" diagnostic model was 81.3%, and the specificity was 95.0%. The AUC was 0.811(95%CI: 0.761-0.954). The sensitivity, specificity and AUC of the diagnosis model of "internal thin vessels with flat misshape" were 90.0%, 96.9% and 0.934(95%CI: 0.830-0.984). The sensitivity, specificity and AUC of the combined diagnosis model of "peripheral muscle fiber interruption" and "internal thin blood vessel straight out of shape" were 96.9%, 90.0% and 0.974(95%CI:0.877-0.999). Conclusion: Ultrasonography can be used to distinguish ASPS from ICTH, and the combined diagnostic model based on the two ultrasonic imaging features of "peripheral muscle fiber interruption" and "internal thin blood vessel straight out of shape" can further improve the diagnostic efficiency.

[Profiles and differences of submucosal microbial in peri-implantitis and health implants: A cross-sectional study].

OBJECTIVE: To describe the submucosal microbial profiles of peri-implantitis and healthy implants, and to explore bacteria that might be correlated with clinical parameters. METHODS: In the present cross-sectional study, 49 patients were recruited. Each patient contributed with one implant, submucosal biofilms were collected from 20 healthy implants and 29 implants with peri-implantitis. DNA was extracted and bacterial 16S ribosomal RNA (16S rRNA) genes were amplified. Submucosal biofilms were analyzed using 16S rRNA sequencing at Illumina MiSeq platform. Differences between the groups were determined by analyzing α diversity, microbial component and microbial structure. The potential correlation between the bacteria with pocket probing depth (PPD) of peri-implant calculated by Spearman correlation analysis. RESULTS: The α diversity of submucosal microbial of health group was significantly lower than that in peri-implantitis group (Chao1 index: 236.85±66.13 vs. 150.54±57.43, P < 0.001; Shannon index: 3.42±0.48 vs. 3.02±0.65, P=0.032). Principal coordinated analysis showed that the submucosal microbial structure had significant difference between healthy and peri-implantitis groups [R2=0.243, P=0.001, analysis of similarities (ANOSIM)]. Compared with healthy implants, relative abundance of periodontal pathogens were higher in peri-implantitis, including members of the red complex (Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola) and some members of orange complex (Precotella intermedia, Eubacterium nodatum, Parvimonas micra), as well as some new periodontal pathogens, such as Fillifactor alocis, Fretibacterium fastidiosum, Desulfobulbus sp._HMT_041, and Porphyromonas endodontalis. Spearman correlation analysis revealed that the relative abundance of Treponema denticola (r=0.686, P < 0.001), Tannerella forsythia (r=0.675, P < 0.001), Fretibacterium sp. (r=0.671, P < 0.001), Desulfobulbus sp._HMT_041 (r=0.664, P < 0.001), Filifactor alocis (r=0.642, P < 0.001), Fretibacterium fastidiosum (r=0.604, P < 0.001), Porphyromonas gingivalis (r=0.597, P < 0.001), Porphyromonas endodontalis (r=0.573, P < 0.001) were positive correlated with PPD. While the relative abundance of Rothia aeria (r=-0.615, P < 0.001) showed negatively correlation with PPD. CONCLUSION: Marked differences were observed in the microbial profiles of healthy implants and peri-implantitis. The members of red and orange complex as well as some new periodontal pathogens seem to play an important role in peri-implant disease. Compared with healthy implants, the submucosal microbial of peri-implantitis were characterized by high species richness and diversity.

[Analysis of dust and noise exposure levels in the mining industry from the national surveillance program in 2019].

Objective: To understand the exposure level of dust and noise in the mining industry and provide data support for revising policy for the prevention and control of occupational diseases. Methods: In May 2022, Data was collected through the National Surveillance Program for Occupational Hazards in the Workplace. Descriptive analysis was conducted for dust and noise levels by industry type and enterprise size from 7, 679 enterprises in the mining industry among 29 provincial regions nationwide. Results: The enterprises in the mining industry included in the National Surveillance Program for Occupational Hazards in the Workplace are mainly small and micro, accounting for 47.97% (3684/7679) and 30.00% (230/7679) respectively. The industry is mainly compred of employers in the non-metallic ming and beneficiation industry, accounting for 50.25% (3859/7679). Among the enterprises with silica dust, coal dust, and noise hazards, the proportion of enterprises where total dust concentration and noise intensity exceed the standard is higher than 50%. 30% of the posts are with an exposure level of silica dust, coal dust, and noise that exceeds the standard. The exceedance rate and the median of the time-weighted average concentration of total coal dust among large and medium-sized enterprises are higher than those among small and micro-sized enterprises (P<0.05) . Conclusion: The dust and noise hazards in the mining industry are lower than in the past in China, but more than 25% of workers are still at a high risk of occupational pneumoconiosis and noise deafness. Therefore, intervention and surveillance strategies should be strengthened in the future.

[Analysis of the status of occupational disease prevention and control of enterprises in mining and manufacturing industries in China in 2019].

Objective: To analyze the status of prevention and treatment of occupational diseases among mining and manufacturing industries in China in 2019, provide the scientific basis for the formulation and revision of policies and standards of prevention and treatment of occupational diseases. Methods: In May 2022, Collecting data of a project named Surveillance of Occupational Hazards in the Workplace in 2019 through the National Surveillance System for Occupational Hazards in the workplace. Compare the status of prevention and treatment of occupational diseases in 63 563 enterprises of mining and manufacturing industries among different dimensions. Results: The training rate of managers was 76.17% and that of occupational health managers was 76.97%. The rate of reporting of occupational diseases hazardous items was 67.58%, the rate of launching of the detection of occupational hazards was 57.16%, and the rate of launching of occupational health examination was 62.42%. Excluding the distribution rate of dust mask, the installation rate of various occupational prevention facilities and the distribution rate of gas mask and hearing protector were less than 80%. The differences in all the indicators among different areas, enterprise scales, economic types were statistically significant (P<0.05) . Conclusion: There are still some enterprises which are relatively weak in the ability of the prevention and treatment of occupational diseases in China. Measures such as special support, guidance and strengthen supervision should be taken towards those enterprises toimprove the awareness of prevention and treatment of occupational diseases and the level of that.

[Investigation and analysis of late reporting and under-reporting of occupational diseases from 2018 to 2020 in China].

Objective: To understand the late reporting and the under-reporting of occupational disease from 2018 to 2020 in China and analyze the causes, so as to provide scientific evidence for improving the quality of occupational disease reports in China, timely acquiring the incidence of occupational disease, and assessing the occupational hazards. Methods: From May to December 2021, A total of 320 occupational disease diagnostic institutions were selected for investigation. The original documents of occupational disease diagnosis cases from 2018 to 2020 were compared with the online reported cases, and late reported and under-reported cases of occupational disease were analyzed. Results: A total of 32207 diagnosed cases from 2018 to 2020 were investigated, including 28934 confirmed cases and 3273 cases without occupational disease. The overall late reported rate and under-reported rate of confirmed cases were 20.2% and 2.1%, respectively. There were significant differences in the rate of late reporting and under-reporting of occupational diseases in different regions and different types of diagnostic institutions (P<0.001). The southwest region had the highest rates of late reporting and under-reporting, 61.6% and 7.9% respectively. The late reported rate of all kinds of occupational diseases was about 15.0%, and the under-reported rate was from 1.5.0% to 5.0%. Conclusion: At present, the phenomenon of late reporting and under-reporting occupational diseases is still obvious. It is necessary to strengthen the inspection of occupational disease reporting, improve the quality of occupational disease reporting, and provide scientific basis for the formulation of occupational disease prevention and control policies.

[A summary on surveillance system of occupational disease under the framework of National Health Insurance Informatization Project].

The surveillance of occupational disease has entered a new stage ofdevelopment, with the implementation of the national health informatization project. To improve the efficiency and quality of occupational disease monitoring information reporting in this paper, the system architecture and related management regulations, as long as the major changes and achievement of "surveillance system of occupational disease and health hazards information" under the framework of National Health Insurance Informatization Project were elaborated. The deficiencies existing in the system were analyzed, and expectation for the construction of the occupational disease surveillance system was addressed.

[Rethinking the marketing strategy of anti-tumor drugs by single-arm trials supported].

Single-arm trial refers to a clinical trial design that does not set up parallel control group, adopts open design, and does not involve randomization and blind method. These features, on the one hand, speed up the process of clinical trials, significantly shorten the time to market and meet the needs of patients with advanced malignancies, but also lead to the uncertainty of single-arm clinical trials themselves. Recently, the US Food and Drug Administration held a meeting of the oncologic drug advisory committee to discuss six tumor indications that have been accelerated approved, which once again triggered the discussion of single-arm trials. The basis of accelerated approval by single-arm trial is actually a compromise on the level of evidence-based medical evidence requirements after assessing the benefit risk. Therefore, the sponsor should strictly grasp the applicable conditions of single-arm trial in anti-tumor drugs and conduct single-arm trial scientifically. Post-marketing clinical trial should be implement as early as possible to ensure the benefit of patients. Based on the characteristics of single-arm trial, combined with two guidance relevant to single-arm trial issued by National Medical Products Administration recently, this article is supposed to propose and summarize the strategy of single-arm trial supporting the marketing of anti-tumor drugs.

[Efficacy of combined application of glycine powder air-polishing in non-surgical treatment of peri-implant diseases].

OBJECTIVE: To compare the clinical efficacy of combined application of glycine powder air-polishing and mechanical submucosal debridement in non-surgical treatment of peri-implant diseases. METHODS: A randomized controlled clinical study was carried out on patients diagnosed with peri-implant diseases in the Department of Periodontology, Peking University School and Hospital of Stomatology, between May of 2020 and June of 2021.Twenty-eight patients with totally sixty-two implants were enrolled.The patients were randomly divided into the test group and control group. The patients in the test group (13 subjects/32 implants) received mechanical submucosal debridement using titanium curettes combined with application of glycine powder air-polishing, while the control group (15 subjects/30 implants) received mechanical submucosal debridement using titanium only. Clinical parameters, such as plaque index (PLI), pocket probing depth (PPD), bleeding index (BI) and the percentage of suppuration on probing on implants' level (SoP%) were measured at baseline and 8 weeks after non-surgical intervention. Changes and group differences of clinical parameters of the implants before and 8 weeks after non-surgical intervention were compared. RESULTS: Mean PLI, PPD, BI of both the test group and control group significantly reduced 8 weeks after non-surgical intervention (P < 0.05). Compared with the control group, the test group achieved lower BI (2.7±0.8 vs. 2.2±0.7, P < 0.05), more reduction of BI (0.6±0.7 vs. 1.1±0.6, P < 0.01) and more reduction of SoP% (21.9% vs. 10%, P < 0.05) after non-surgical intervention. Both the control and test groups exhibited comparable PLI and PPD reductions (P>0.05). For the implants diagnosed with peri-implant mucositis, the test group revealed more signi-ficant reduction in BI and SoP% than the control group (1.0±0.7 vs. 0.4±0.7, P=0.02; 6.3% vs. 0, P=0.012). There was no significant difference existing in PLI and PD improvement between the control group and test group (P>0.05). For the implants diagnosed with peri-implantitis, there was no significant difference existing in PLI, PPD, BI and SoP% improvement values between the test and control groups (P>0.05). No complications or discomforts were reported during the study. CONCLUSION: Both treatment procedures could relieve the inflammation of peri-implant soft tissue. Non-surgical mechanical submucosal debridement combined application of glycine powder air-polishing is associated with significant reduction of soft tissue bleeding and suppuration on probing especially in the implants diagnosed with peri-implant mucositis.

[Healing of the dento-gingival junction following modified crown lengthening procedure in beagle dogs].

OBJECTIVE: To evaluate the type of wound healing following modified crown lengthening surgery in dog model to provide a biological basis for its clinical application. METHODS: Flap surgery, traditional crown lengthening procedure and modified crown lengthening procedure were performed on the right maxillary central incisor, the left maxillary central incisor and the left maxillary first lateral incisor respectively of five male beagle dogs. The right maxillary first lateral incisors with no surgical intervention were used as controls. Thirty-six weeks after the experimental procedure, tissue blocks were harvested and prepared for histological examination and analysis. RESULTS: Histometric examination of buccolingual sections stained with hematoxylin-eosin demonstrated that the type of wound healing in the flap surgery group was re-attachment, similar to the control group. For the traditional crown lengthening surgery group, all of the five beagle dogs had lamellar cementum defects on root surface, the wound healing of four beagle dogs was new attachment accompanied by new cementum formation at cementum defect areas and the suprac-restal connective tissue was functionally oriented perpendicular to the new cementum. The wound healing of the other beagle dog was long junctional epithelial attachment, in which the junctional epithelium extended to the apical terminus of the cementum defect. In the modified crown lengthening surgery group, four beagle dogs had cementum defects on root surface (two lamellar cementum defects and two shallow platform-like cementum defects), the wound healing of three beagle dogs was new attachment, however, the supracrestal connective tissue was parallel to the root surface. The type of wound healing of another one beagle dog was long junctional epithelial attachment. Wound healing of one beagle dog in this group could not be characterized due to incomplete dissection. CONCLUSION: Wound healing in the modified crown lengthening surgery group was similar to the traditional crown lengthening surgery group, and two types of wound healing were observed: new attachment and long junctional epithelium attachment. Neither type of root treatment procedure (root planing or root reshaping) nor root surface defect pattern (the lamellar cementum defect or shallow platform-like cementum defect) influenced the observed type of wound healing.

[A case of intramuscular injection of methomyl poisoning].

Methomyl is a carbamate insecticide widely used in pesticides. Most of the poisoning methods are through digestive tract, respiratory tract and skin contact. At present, there is no report of poisoning caused by intramuscular injection. A case of poisoning caused by intramuscular injection of methomyl was analyzed retrospectively. About 4 minutes later, cholinergic crisis and central inhibition occurred. Venovenous-Extracorporeal Membrane Oxygenation (VV-ECMO) and atropine were given quickly. Finally, the patient was successfully rescued and had a good prognosis. After intramuscular injection of methomyl, cholinergic crisis can occur rapidly, and the onset rate is significantly faster than that of digestive tract, respiratory tract and skin contact.

[Three-dimensional morphology analysis of the supraosseous gingival profile of periodontally healthy maxillary anterior teeth].

OBJECTIVE: To measure the three-dimensional morphology of the labial supraosseous gingiva (SOG) and the thickness of related labial bone in maxillary anterior teeth of periodontally healthy Han nationality youth using soft tissue indirect imaging cone-beam computed tomography (CBCT). METHODS: Twenty-five periodontally healthy subjects (11 males and 14 females) with 150 maxillary anterior teeth were involved in this study. A special impression with radiopaque material including the maxillary teeth was made, then a CBCT scan with the elastomeric matrix in position was taken for each subject. The imaging data were generated and transferred to a volumetric imaging software in which three-dimensional reconstruction was conducted and the image analyses were carried out. Measurements were made at the site of labial center of the maxillary anterior teeth. The height of the SOG, the distance between cemento-enamel junction (CEJ) and bone crest, the gingival thickness at the CEJ, and the thickness of bone 2 mm below the labial bone crest were measured and the correlation analysis between the parameters was made. All the data analyses were performed using SPSS 22.0. The data were analyzed with ANVOA and Pearson correlation tests with the significance level at α=0.05. RESULTS: The mean SOG values were (3.49±0.70) mm, (3.48±0.81) mm, and (3.54±0.67) mm for central incisors, lateral incisors and canines, respectively. There were no statistically significant differences among the different sites (P > 0.05). The mean gingival thickness values were (1.45±0.23) mm, (1.13±0.24) mm, (1.14±0.22) mm for central incisors, lateral incisors and canines, respectively. The gingival thickness of the central incisors was the largest among the maxillary anterior teeth with statistically significant difference (P < 0.05). No correlation was found between the SOG and gingival thickness among the maxillary anterior teeth (P > 0.05). CONCLUSION: The gingival thickness of central incisors was the largest and the supraosseous gingival height had no correlation with gingival thickness among the periodontally healthy maxillary anterior teeth.

[Clinical features and CT findings of Takayasu's arteritis associated pulmonary hypertension].

Objective: Takayasu's arteritis involving the pulmonary artery (PTA) is uncommon, and those with pulmonary hypertension (PH) are even rarer. This study investigated the clinical features and CT findings in PTA patients with PH. Methods: A total of 40 PTA patients were retrospective selected in the First Hospital of Air Force Medical University from January 2008 to January 2018. There were 14 PTA patients with PH, including 3 male and 11 female cases, aged from 18 to 53 (29.7±9.4) years, as the study group (PTA+PH group). There were 26 PTA patients without PH, including 4 males and 22 females, aged 15-52 (28.9±8.5) years, as the control group (PTA group). The Chi-square or Fisher's test, T test of two independent samples and Mann-Whitney U rank sum test were used to compare the general information, symptoms, signs, laboratory examination data, right ventricular and pulmonary artery measurement data, and pulmonary artery CT findings between the two groups. Results: Compared with the PTA group, the patients in the PTA+PH group had longer disease duration, fewer active cases, more shortness of breath, chest distress and lower limb edema, lower blood oxygen partial pressure (PaO2) and lower ESR (all P<0.05). The width of right atrium and right ventricle in PTA+PH group was greater than that in PTA group (all P<0.05). The main CT findings of the involved pulmonary artery included lumen stenosis (39 cases, 97.5%), lumen occlusion (16 cases, 40%), wall thickening (9 cases, 22.5%), and lumen dilation (2 cases, 5.0%). Patients in the PTA+PH group had less wall thickening and mild lumen stenosis (<50%), more severe lumen stenosis (≥50%) and occlusion than those in the PTA group (all P<0.05). Conclusions: PTA patients with PH showed certain characteristics in clinical, laboratory and CT findings, which may be correlated to the stage of the disease duration, the severity, and the prognosis.

[Investigation on noise exposure level and health status of workers in transportation equipment manufacturing industry].

Objective: To explore the noise exposure level and the health status of workers in transportation equipment manufacturing industry, and provide a scientific basis for guidance and implementation of intervention measures. Methods: From January to December in 2019, a total of 2088 noise workers from a large enterprise were selected by cluster sampling method in railway transportation equipment manufacturing, automobile manufacturing and aerospace aircraft manufacturing enterprises. The worker's noise exposure level was detected. Occupational health checkups were performed on the noise workers including electrical audiometry, blood pressure and electrocardiogram. χ(2) test and trend χ(2) test were used to analyze the data. Results: The noise exposure level of 66.9% (1396/2088) workers exceeded 85 dB (A) , and the median noise level was 87.9 (84.3-90.3) dB (A) . Among them, workers of railway transportation equipment manufacturing enterprises had the highest noise exposure level[89.9 (87.8-91.6) dB (A) ]. The detection rate of high-frequency hearing loss, abnormal blood pressure and abnormal electrocardiogram of noise workers were 15.7% (327/2088) , 18.1% (378/2088) and 6.1% (128/2088) , respectively. The differences in the detection rates of high-frequency hearing loss, abnormal blood pressure, and abnormal electrocardiogram in workers of railway transportation equipment manufacturing enterprises, automobile manufacturing enterprises, and aerospace manufacturing enterprises were statistically significant (P<0.05) . Workers of railway transportation equipment manufacturing enterprises had higher detection rates of high-frequency hearing loss (17.6%, 186/1056) . Workers of aerospace manufacturing enterprises had higher detection rates of abnormal blood pressure and abnormal electrocardiogram (26.3%, 169/642; 10.0%, 64/642) . The differences in the detection rates of high-frequency hearing loss, abnormal blood pressure and abnormal electrocardiogram of noise workers were statistically significant in different age and working age groups, and gradually increased with age and working age (P<0.05) . The difference in the detection rate of high-frequency hearing loss of noise workers was statistically significant in different noise intensity groups, and the overall trend was increasing (P<0.05) . Conclusion: The transportation equipment manufacturing industry has serious noise hazards, especially the railway transportation equipment manufacturing industry. Long-term occupational noise exposure can adversely affect workers' hearing and cardiovascular system. Enterprises should strengthen occupational health inspections, and at the same time, take personal protective measures to protect the health of workers.

[Application of biocopy function of temporary crown occlusal morphology in patients with severe attrition].

OBJECTIVE: To explore the preliminary application of "biocopy function" in digital technology of temporary crown in severe tooth attrition, so as to reduce the difficulty of final restoration adjustment in severe tooth wear cases, and save clinical time. METHODS: Twelve patients aged between 40 and 65 years with severe tooth attrition were recruited in this study. The experimental group (6 cases, 3 females and 3 males) used the method of digital copy of temporary restoration shape when making the final restoration, and the control group (6 cases, 3 females and 3 males) used the traditional method to make the final restoration. The mean time of central occlusal adjustment and protrusive and lateral occlusal adjustment of each crown, the number of follow-up visits of the patients were recorded and statistically analyzed. The occlusal comfort of the first and the third months after wearing the prosthesis was evaluated by the patients, and the difference of the occlusal comfort of the final prosthesis made by the two methods was compared (the full score was 10 points). The occlusal adjustment time and occlusal comfort score were used as measurement data. Single sample t test was used. The number of follow-up visits was count data. Rank sum test was used for non-normal continuous variables. RESULTS: The mean occlusal time of each crown adjustment in the experimental group was significantly lower than that in the control group (P < 0.01), and the median number of follow-up visits in the experimental group was lower than that in the control group (P < 0.01). The average occlusal comfort score of the experimental group was higher than that of the control group at the first time (P < 0.01). After three months of crown wearing, the median occlusal comfort score of the experimental group was higher than that of the control group (P < 0.05). CONCLUSION: In the case of severe tooth attrition, it is feasible to use the "biocopy function" in the design software to design the final prosthesis, which is conducive to reduce the difficulty of adjustment and achieve predictable functional and aesthetic effects, which is of great significance to save clinical time and improve the accuracy of restoration.

[Clinical outcomes of ultrasonic subgingival debridement combined with manual root planing in severe periodontitis].

OBJECTIVE: To compare the clinical effects of ultrasonic subgingival debridement and ultrasonic subgingival debridement combined with manual root planing on severe periodontitis and then to investigate the necessity and significance of manual root planing. METHODS: Twenty-three patients with severe periodontitis participated in this split-mouth randomized-controlled clinical trial. Baseline examination and randomization were performed after supragingival scaling: each of the upper and lower jaws had a quadrant as the test group treated with ultrasonic subgingival debridement combined with manual root planing, whereas the other two quadrants were the control group treated with ultrasonic subgingival debridement. Treatment of each patient was at intervals of one week and completed in two visits. Clinical indicators concerning probing depth (PD), clinical attachment loss (CAL) and bleeding index (BI) were recorded at baseline and 1 month, 3 months, 6 months after treatment. RESULTS: There was no significant difference of periodontal indicators between the test group and the control group at baseline. Both the test group and control group resulted in significant improvement of PD, CAL and BI. One and three months after treatment, reduction of PD in the test group was higher than that in the control group [1 month: (2.13±1.31) mm vs. (1.79±1.33) mm, P<0.01; 3 months: (2.46±1.33) mm vs. (2.17±1.38) mm, P<0.01] and reduction of CAL in the test group was higher than that in the control group [1 month: (1.89±2.03) mm vs. (1.65±1.93) mm, P<0.01; 3 months: (2.03±2.05) mm vs. (1.83±1.97) mm, P<0.05]. Six months after treatment, PD in the test group and the control group decreased by (2.52±1.40) mm and (2.35±1.37) mm respectively, and the improvement in the test group was significantly better than that in the control group (P<0.01). CAL in the test group and the control group decreased by (1.89±2.14) mm and (1.77±2.00) mm respectively, and there was no statistical difference between the groups. There was no significant difference in the changes of BI between the two groups 1, 3 and 6 months after treatment. CONCLUSION: Ultrasonic subgingival debridement combined with manual root planing has more reduction in PD and CAL compared with ultrasonic subgingival debridement. Therefore, it is still necessary to use manual instruments for root planing following ultrasonic subgingival debridement.

[Two procedures for ridge preservation of molar extraction sites affected by severe bone defect due to advanced periodontitis].

OBJECTIVE: To evaluate and to compare dimensional alterations of hard and soft tissues in molar extraction sites with irregular deficiency of bone plates due to advanced periodontitis receiving two different procedures, namely the flapped and flapless techniques with Bio-Gide membrane covering the Bio-Oss material for ridge preservation. METHODS: Twenty-three patients with 24 infected-molar extraction sites received ridge preservation procedure, the first consecutive 12 sites belonged to the flap group (a full thickness mucoperiosteal flap and primary soft tissue closure) and the following 12 sites belonged to the flapless group (minimal flap with a collagen sponge and a secondary soft tissue closure). Width of keratinized tissue was evaluated before tooth extraction and after 6-month healing. Parallel periapical radiographs were taken immediately and 6 months after extraction to evaluate vertical bone changes. The width of the ridge was measured in the center of the ridge at the time of tooth extraction and after 6 months at implant placement. RESULTS: After 6 months, width of keratinized tissue decreased (1.6±1.5) mm in the flap group (P=0.004) when compared with (0.3±1.6) mm in the flapless group (P>0.05). Both groups showed increases in ridge height from the central aspect, (5.53±4.20) mm for flap group and (7.70±4.35) mm for flapless group. These differences between the groups were not statistically significant (P=0.226). The ridge widths were (9.5±2.2) mm for flap group and (9.3±1.0) mm for flapless group at the time of implant insertion, and no statistical significance was observed between the flap and flapless groups. CONCLUSION: The study points out that both ridge preservation techniques were effective in increasing ridge height and minimizing ridge resorption after tooth extraction, and the ridge width allowed the placement of implants 6 months after ridge preservation. The flapless technique gave positive outcome in terms of the keratinized gingival width than that of the flap technique.

[Effects of occupational noise exposure on asymmetric hearing loss in automobile manufacturing workers].

Objective: To investigate the characteristics of asymmetric hearing loss in automobile manufacturing workers and the effect of occupational noise exposure on asymmetric hearing loss. Methods: A cross-sectional approach was used in this study. From March 2017 to February 2018, Subjects (7066) from four complete vehicle factories were given a pure tone audiometry (Hearing thresholds were measured at frequencies of 0.5, 1, 2, 3, 4 and 6 kHz in each ear) and were required to complete a health-related information questionnaire. According to the inclusion criteria, a total of 6339 workers were selected. The mean hearing thresholds for the left and right ears at overall frequencies were compared using the repeated means analysis of variance (ANOVA) test. The threshold differences at each frequency were compared using paired t tests. Results: The overall mean left minus right threshold difference across all frequencies was determined to be 0.58 dB, which met statistical significance (P<0.01) . Hearing threshold in the left ear was statistically significantly higher compared with the right ear at each frequency. The differences between binaural threshold shifts at each frequency among subjects with a asymmetry in terms of worse left ear and worse right ear were at the range of 6.17-9.87 dB and 6.39-10.92 dB, respectively. Hearing threshold in the left ear was statistically significantly higher compared with the right ear at only 2, 3 kHz of subjects with high-frequency hearing threshold shifts (HFHTs) more than 25 dB. Hearing threshold in the left ear was statistically significantly higher compared with the right ear at only 3 kHz of subjects with high-frequency hearing threshold shifts (HFHTs) more than 30 dB. With the increase of HFHTs, the proportion of subjects with a asymmetry at 2 and 3 kHz of more than 10 dB in terms of worse left ear and worse right ear increased. Conclusion: The average hearing threshold of the left ear across overall frequencies is higher compared with the right ear, the proportion of the cases with a higher left ear hearing threshold is higher that that of the cases with a higher right ear hearing threshold. As hearing loss caused by occupational noise exposure getting worse, the proportion of the cases with a higher left ear hearing threshold and the cases with a higher right ear hearing threshold may tent to be the same.

[Molecular origins of cancer and future cancer therapy].

The accumulation of genomic and epigenetic changes gives rise to the tumorigenesis and progression. Currently, clonal evolution model and cancer stem cell model, two leading theories of caner origin, are becoming complementary to one another to explain the nature of tumor heterogeneity. Precision medicine that is based on the next generation sequencing and big data describes the phenomena of tumor heterogeneity more precisely. The future cancer therapy may need more comprehensive and dynamical understandings of the distinct subclones of tumor and follow the trends of cancer evolution.

[Preliminary study on the accuracy of infrabony root surface area of single-root teeth by periapical films].

OBJECTIVE: To explore the accuracy of periapical film in evaluating the infrabone root surface area of single-root teeth with different types of resorption of the alveolar bone. METHODS: In this study, the medical records and imaging data of patients in Department of Periodontology of Peking University Hospital of Stomatology from January 2014 to December 2016 were retrospectively analysed. The involved teeth were divided into two groups: horizontal bone loss group and vertical bone loss group. Digital three-dimensional models of teeth were segmented from cone beam computed tomography (CBCT) data, and the percentage of the infrabone root surface area was measured. While the percentage of the residual alveolar bone was measured on the periapical films. The correlation of the two percentages were analyzed, and the differences between the two percentages of each group were compared. RESULTS: Thirty-two patients and 79 single-root teeth were involved totally, in whom there were 25 men and 7 women, aged 26-60 years, and of which there were 41 teeth in the horizontal bone loss group and 38 teeth in the vertical bone loss group. The remaining alveolar bone height percentages were 45.13%-90.39% on the periapical films, and at the same time, the infrabone root surface area percentages were 36.27%-93.03% on CBCT. The residual alveolar bone height percentage of the horizontal bone loss group was not subject to normal distribution, so the residual alveolar bone height percentage and the infrabone root surface area percentage were analyzed by Wilcoxon matched pair rank test (P=0.382), and the result showed no statistically significant difference. The mean value of difference value of the two measurements was 0, and the consistency limit of 95 % was -9.7%-9.8%, between the clinical consistency limit (-15%-15%).The residual alveolar bone height percentage and the infrabone root surface area percentage of the vertical bone loss group were analyzed by paired T test (P< 0.001), and the result showed statistically significant difference. The mean value of difference value of the two measurements was 7.2 %, and the consistency limit of 95% was -13.1%-27.5%, beyond clinical consistency limit (-15%-15%). CONCLUSION: For the teeth with horizontal bone loss, the proximal residual alveo-lar bone height reflected on the periapical films could show the infrabone root surface area relatively accurately. For the teeth with vertical bone loss, the periapical films could not show the degree of periodontal tissue loss accurately, and it would underestimate the extent of bone destruction usually, so CBCT might be taken to show the bone destruction condition of this type of teeth if necessary.

[Application of digital design of orthodontic-prosthodontic multidisciplinary treatment plan in esthetic rehabilitation of anterior teeth].

OBJECTIVE: To develop a digital workflow of orthodontic-prosthodontic multidisciplinary treatment plan which can be applied in complicated anterior teeth esthetic rehabilitation, in order to enhance the efficiency of communication between dentists and patients, and improve the predictability of treatment outcome. METHODS: Twenty patients with the potential needs of orthodontic-prosthodontic multidisciplinary treatment to solve their complicated esthetic problems in anterior teeth were recruited in this study. Digital models of patients' both dental arches and soft tissues were captured using intra oral scanner. Direct prosthodontic (DP) treatment plan and orthodontic-prosthodontic (OP) treatment plan were carried out for each patient. For DP treatment plans, digital wax-up models were directly designed on original digital models using prosthodontic design system. For OP treatment plans, virtual-setups were performed using orthodontic analyze system according to orthodontic and esthetic criteria and imported to prosthodontic design system to finalize the digital wax-up models. These two treatment plans were shown to the patients and demonstrated elaborately. Each patient rated two treatment plans using visual analogue scales and the medians of scores of two treatment plans were analyzed using signed Wilcoxon test. Having taken into consideration various related factors, including time, costs of treatment, each patient chose a specific treatment plan. For the patients chose DP treatment plans, digital wax-up models were exported and printed into resin diagnostic models which would be utilized in the prosthodontic treatment process. For the patients chose OP treatment plans, virtual-setups were used to fabricate aligners or indirect bonding templates and digital wax-up models were also exported and printed into resin diagnostic models for prosthodontic treatment after orthodontic treatment completed. RESULTS: The medians of scores of DP treatment plan and OP treatment plan were calculated and analyzed by IBM SPSS 20. The median of scores of DP treatment plan was 8.4, the minimum value was 6.9 and the maximum value was 9.3. The median of scores of OP treatment plan was 9.0, the minimum value was 7.9 and the maximum value was 9.6. The median of scores of OP was significantly higher than that of DP (Z=-3.23, P<0.01). Finally, 12 patients chose OP treatment plans and 8 patients chose DP treatment plans. CONCLUSION: For cases with complex esthetic problems in anterior teeth, a digital workflow can demonstrate final treatment outcome and help patients make suitable treatment decisions. In our study, the orthodontic-prosthodontic multidisciplinary treatment plan is feasible which can provide predictions of treatment outcome and improve esthetic outcome with patients' satisfaction.