Soluble carbon source recovery using preconditioning coagulants for applicable short-term fermentation of waste activated sludge in WWTPs.

A huge production of waste activated sludge (WAS) has been a burden for wastewater treatment plants (WWTPs) with high disposal cost and little benefit back to wastewater purification. The short-chain fatty acids (SCFAs) produced by a short-term acidogenic fermentation of WAS before methane production have been proven to be a high-quality carbon source available for microbial denitrification process. The dual purpose of full recovery of fermentation liquid products and facilitating disposal of residual solid waste necessitate an efficient solid-liquid separation process of short-term fermentation liquid. The transformation and loss of various soluble carbon sources between solid and liquid are very important issues for carbon recovery efficiency when combining short-term fermentation and sludge dewatering in WWTPs. Here we testified the three conventional preconditioning coagulants, Polyferric Sulfate (PFS), Poly Aluminum Chloride (PAC) and Polyacrylamide (PAM), to improve the efficiency of subsequent solid-liquid separation. The results show that conversion yield of SCFAs in the liquid phase of sludge after short-term fermentation was 195 mg COD/g VSS, when using the coagulants PFS, PAC, and PAM for recovery, the recovery ratio was 79.5%, 82.0%, and 85.9%, respectively, while the dewaterability could be improved after preconditioning short-term fermentation sludge. The complexation of Al3+/Fe3+ in metal coagulants with carboxyl groups of SCFA demonstrated by Density Functional Theory calculation led to small part of soluble carbons co-migration to the solid phase, mainly a loss of high molecular weight organic compounds (carbohydrate, proteins, humic acids), while the application of PAM had little impact on carbon recovery. Economic calculations further showed PAM preconditioning short-term fermentation liquid of WAS could achieve higher recovery benefits.

Carbon source recovery from waste sludge reduces greenhouse gas emissions in a pilot-scale industrial wastewater treatment plant.

Carbon cycle regulation and greenhouse gas (GHG) emission abatement within wastewater treatment plants (WWTPs) can theoretically improve sustainability. Currently, however, large amounts of external carbon sources used for deep nitrogen removal and waste sludge disposal aggravate the carbon footprint of most WWTPs. In this pilot-scale study, considerable carbon was preliminarily recovered from primary sludge (PS) through short-term (five days) acidogenic fermentation and subsequently utilized on-site for denitrification in a wool processing industrial WWTP. The recovered sludge-derived carbon sources were excellent electron donors that could be used as additional carbon supplements for commercial glucose to enhance denitrification. Additionally, improvements in carbon and nitrogen flow further contributed to GHG emission abatement. Overall, a 9.1% reduction in sludge volatile solids was achieved from carbon recovery, which offset 57.4% of external carbon sources, and the indirect GHG emissions of the target industrial WWTP were reduced by 8.05%. This study demonstrates that optimizing the allocation of carbon mass flow within a WWTP has numerous benefits.

ß-Nd(2)Mo(4)O(15).

The title compound, dineodymium(III) tetra-molybdate(VI), has been prepared by a flux technique and is the second polymorph of composition Nd(2)Mo(4)O(15). The crystal structure is isotypic with those of Ce(2)Mo(4)O(15) and Pr(2)Mo(4)O(15). It features a three-dimensional network composed of distorted edge- and corner-sharing NdO(7) polyhedra, NdO(8) polyhedra, MoO(4) tetra-hedra and MoO(6) octa-hedra.