Flexoelectric Engineering of Bulk Photovoltaic Photodetector.

The bulk photovoltaic effect (BPVE) offers an interesting approach to generate a steady photocurrent in a single-phase material under homogeneous illumination, and it has been extensively investigated in ferroelectrics exhibiting spontaneous polarization that breaks inversion symmetry. Flexoelectricity breaks inversion symmetry via a strain gradient in the otherwise nonpolar materials, enabling manipulation of ferroelectric order without an electric field. Combining these two effects, we demonstrate active mechanical control of BPVE in suspended 2-dimensional CuInP2S6 (CIPS) that is ferroelectric yet sensitive to electric field, which enables practical photodetection with an order of magnitude enhancement in performance. The suspended CIPS exhibits a 20-fold increase in photocurrent, which can be continuously modulated by either mechanical force or light polarization. The flexoelectrically engineered photodetection device, activated by air pressure and without any optimization, possesses a responsivity of 2.45 × 10-2 A/W and a detectivity of 1.73 × 1011 jones, which are superior to those of ferroelectric-based photodetection and comparable to those of the commercial Si photodiode.

Correction: Ionic migration induced loss analysis of perovskite solar cells: a poling study.

Correction for 'Ionic migration induced loss analysis of perovskite solar cells: a poling study' by Xue Zheng et al., Phys. Chem. Chem. Phys., 2022, 24, 7805-7814, https://doi.org/10.1039/D1CP05450C.

Spatiotemporally Correlated Imaging of Interfacial Defects and Photocurrents in High Efficiency Triple-Cation Mixed-Halide Perovskites.

Triple-cation mixed-halide perovskites have attracted considerable attention due to their excellent photovoltaic properties and enhanced stability, though the power conversion efficiency (PCE) is still far below the theoretical expectation. In order to understand the microscopic mechanisms responsible for the gap, a Cs0.05 (FA0.85 MA0.15 )0.95 Pb(I0.85 Br0.15 )3 (CsFAMA)-based solar cell with respectful efficiency over 20% is examined, and distinct high- and low-current regions are observed in photoconductive atomic force microscopy (pc-AFM) mapping. Simulations attribute the difference in local photocurrents to interfacial donor defect densities at the NiO/CsFAMA interface, which is supported by electrochemical strain microscopy (ESM) mapping, revealing a negative correlation between ionic defects and photocurrents. The interfacial defects can be further manipulated by external bias upon relaxation study, resulting in reduced photocurrents accompanied by topography change when positive ions are driven toward the NiO/CsFAMA interface. It is also observed that both structure variation and photocurrent degradation upon accelerated aging test initiate at grain boundaries, which gradually expand at the expense of grain interior, suggesting that ionic defects are most active at grain boundaries. These findings render a direct correlation between interfacial defects and photocurrents while revealing degradation evolution, and if such interfacial defects heterogeneity can be mitigated, PCE toward the theoretical limit with enhanced stability can be envisioned.

Dynamics of Polar Skyrmion Bubbles under Electric Fields.

Room-temperature polar skyrmions, which have been recently discovered in oxide superlattice, have received considerable attention for their potential applications in nanoelectronics owing to their nanometer size, emergent chirality, and negative capacitance. For practical applications, their manipulation using external stimuli is a prerequisite. Herein, we study the dynamics of individual polar skyrmions at the nanoscale via in situ scanning transmission electron microscopy. By monitoring the electric-field-driven creation, annihilation, shrinkage, and expansion of topological structures in real space, we demonstrate the reversible transformation among skyrmion bubbles, elongated skyrmions, and monodomains. The underlying mechanism and interactions are discussed in conjunction with phase-field simulations. The electrical manipulation of nanoscale polar skyrmions allows the tuning of their dielectric permittivity at the atomic scale, and the detailed knowledge of their phase transition behaviors provides fundamentals for their applications in nanoelectronics.

Ionic migration induced loss analysis of perovskite solar cells: a poling study.

Understanding the interplay between ionic migration and defect trapping in photovoltaic perovskites is critical to develop targeted passivation techniques for performance enhancement. In this study, systematic poling experiments on Cs0.05(FA0.85MA0.15)0.95Pb(I0.85Br0.15)3 perovskite solar cells (PSCs) were conducted to resolve the principal effects of bias dependent pretreatment effects due to dynamic ionic migration. We find that under negative polarizations, iodine ion accumulation at perovskite/electron transport layer (ETL) interfaces causes enhanced global non-radiative recombination in PSCs and significant open-circuit voltage (Voc) losses. On the other hand, dramatic short-circuit current (Jsc) reduction occurs in positively polarized devices, which is ascribed to ineffective charge collection due to modified band-bending towards both charge transport materials. Spatiotemporally scanning probe microscopy on the surface of polarized perovskites provides an in situ estimation of iodine diffusion mobility and visualization of reorganizations under an external bias. Moreover, our findings suggest that the precondition effect of PSCs under operation due to defect ions is recoverable, therefore achieving a respectable lifetime of PSCs for commercialization is promising.

Longitudinal change of metabolite profile and its relation to multiple risk factors for the risk of developing hepatitis B-related hepatocellular carcinoma.

Despite considerable knowledge of viral pathogenesis, the pathophysiological changes related to the multifactorial, multistep process of hepatitis B virus (HBV)-related hepatocellular carcinoma (HCC) development remains unclear. Longitudinal metabolomics study can reveal biological process for disease progression. We performed metabolite profiling with longitudinal prediagnostic plasma samples from two nested case-control studies of hepatitis B surface antigen carriers participating in ultrasound screening for HCC, one within a government employee cohort (870 samples from 109 HCC cases and 107 controls) and the other within a hospital-based cohort (266 samples from 63 HCC cases and 114 controls). Of the 34 measured metabolites, tyrosine, isoleucine, and glutamine were consistently associated with HCC. In analyses combining longitudinal data, a high metabolic risk score based on the three amino acids was robustly associated with increased risk of HCC (OR = 3.71, 95% confidence interval: 2.53-5.42), even after adjustment for clinical factors, or when assessed for different times up to ≥8 years before diagnosis. Similar association was observed in an independent, prospective analysis comprising 633 randomly selected individuals of the government employee cohort. More importantly, this metabolite signature was longitudinally influenced by HBV-infection phase and involved in gradual progression to liver fibrosis and cirrhosis. Furthermore, mediation analysis showed that the score mediated substantial proportions of the associations of key viral factors, insulin resistance, and diabetes status with HCC risk. Our results suggest that an amino-acid dysregulation metabotype may play a role in HBV-related HCC development, and may also be linked to common pathways that mediate increased HCC risks.

Resolving fine electromechanical structure of collagen fibrils via sequential excitation piezoresponse force microscopy.

Collagen is the main protein in extracellular matrix that is found in many connective tissues, and it exhibits piezoelectricity that is expected to correlate with its hierarchical microstructure. Resolving fine electromechanical structure of collagen, however, is challenging, due to its weak piezoresponse, rough topography, and microstructural hierarchy. Here we adopt the newly developed sequential excitation strategy in combination with piezoresponse force microscopy to overcome these difficulties. It excites the local electromechanical response of collagen via a sequence of distinct frequencies, minimizing crosstalk with topography, followed by principal component analysis to remove the background noise and simple harmonic oscillator model for physical analysis and data reconstruction. These enable us to acquire high fidelity mappings of fine electromechanical response at the nanoscale that correlate with the gap and overlap domains of collagen fibrils, which show substantial improvement over conventional piezoresponse force microscopy techniques. It also embodies the spirit of big data atomic force microscopy that can be readily extended into other applications with targeted data acquisition.

High expression level of long non-coding RNA HOTAIR is associated with poor overall survival in gastric cancer patients: evidence from meta-analysis.

PURPOSE: Although several studies have investigated the association between the development of gastric cancer (GC) and the expression level of long non-coding (lnc) RNA HOTAIR, no clear evidence about whether its expression is associated with the overall survival (OS) of GC patients exists. In this study we tried to explore the association between lncRNA HOTAIR expression levels with OS and other clinical features in GC patients. METHODS: Databases including PubMed, EMBASE and the Cochrane Library were used to search eligible studies. The quality of included studies was assessed according to reporting recommendations for tumor marker prognostic studies (REMARK). The association between the expression level of lncRNA HOTAIR and OS was evaluated by calculating the pooled hazard ratio (HR) and 95% confidence interval (95% CI) using the STATA software, version 12.0. RESULTS: A total of 9 studies involving 740 GC and 768 normal gastric tissues were included in this meta-analysis. The average score of quality assessment was 18.89±1.08, (range 16.5-20). The results indicated that high expression levels of lncRNA HOTAIR were associated with poor OS in GC patients (pooled HR: 1.43, 95% CI:1.17-1.76, p=0.000). Subgroup analyses showed that elevated expression of lncRNA HOTAIR was significantly associated with poor OS in Chinese GC patients (HR=1.414, 95%CI: 1.120-1.785, p=0.000), and not treated GC patients (HR=1.464, 95%CI: 1.179-1.817, p=0.001). Subgroup analyses also revealed that some GC patients features (e.g. T3-T4, III/IV stage, differentiation) were associated with an unfavorable outcome. CONCLUSIONS: High expression level of lncRNA HOTAIR is associated with a poor OS in GC patients. Thus, lncRNA HOTAIR might be a potentially useful independent prognostic biomarker for GC.

Intracranial aneurysm rupture risk in northern China: a retrospective case-control study.

Background: Rupture of intracranial aneurysms (IAs) can cause subarachnoid hemorrhage (SAH), which leads to severe neurological dysfunction and even death. Exploring the risk factors for IA rupture and taking preventive measures accordingly can reduce or prevent the occurrence of SAH. Currently, there is still no consensus on the detrimental factors for IA rupture. Thus, our study aimed to investigate the risk factors of IA rupture in a population of northern China. Methods: We systematically collected the demographic features, medical history, and imaging data of aneurysms from patients with ruptured and unruptured IAs (UIAs) who attended the Department of Neurosurgery at the Second Hospital of Hebei Medical University from 2014 to 2019. All cases had been diagnosed by digital subtraction angiography. We excluded patients with SAH resulting from injuries, as well as those with vascular dissection and incomplete data. Finally, 1,214 patients including 616 with ruptured IAs and 598 with UIAs were collected for further analysis. A case-control study was conducted, in which multivariable logistic regression was used to analyze the risk factors for IA rupture. Results: Our multivariable logistic regression showed that anterior cerebral artery [odds ratio (OR) =2.413; 95% confidence interval (CI): 1.235-4.718], anterior communicating artery (OR =3.952; 95% CI: 2.601-6.006), posterior communicating artery (OR =2.385; 95% CI: 1.790-3.177), and anterior circulation branches (OR =3.493; 95% CI: 1.422-8.581) were risk factors for IA rupture, whereas patients with a history of cerebral infarction (OR =0.395; 95% CI: 0.247-0.631) and those with IAs located in the internal carotid artery (OR =0.403; 95% CI: 0.292-0.557) were less likely to have IA rupture. Conclusions: IAs at specific locations are prone to rupture. These IAs should be paid particular attention and preventive measures should be taken to reduce or prevent their rupture.

Increased Deep Trap Density in Interfacial Engineered Nanocomposite Revealed by Sequential Kelvin Probe Force Microscopy for High Dielectric Energy Storage.

Nanocomposites combining inorganic nanoparticles with high dielectric constant and polymers with high breakdown strength are promising for the high energy density storage of electricity, and carrier traps can significantly affect the dielectric breakdown process. Nevertheless, there still lacks direct experimental evidence on how nanoparticles affect the trap characteristics of nanocomposites, especially in a spatially resolved manner. Here, a technique is developed to image the trap distribution based on sequential Kelvin probe force microscopy (KPFM) in combination with the isothermal surface potential decay (ISPD) technique, wherein both shallow and deep trap densities and the corresponding energy levels can be mapped with nanoscale resolution. The technique is first validated using the widely-used commercial biaxially oriented polypropylene, yielding consistent results with macroscopic ISPD. The technique is then applied to investigate polyvinylidene fluoride-based nanocomposites filled with barium titanate nanoparticles, revealing higher deep trap density around surface-modified nanoparticles, which correlates well with its increased breakdown strength. This technique thus provides a powerful spatially resolved tool for understanding the microscopic mechanism of dielectric breakdown of nanocomposites.

Myeloidcells in the immunosuppressive microenvironment in glioblastoma: The characteristics and therapeutic strategies.

Glioblastoma (GBM) is the most common and lethal malignant tumor of the central nervous system in adults. Conventional therapies, including surgery, radiotherapy, and chemotherapy, have limited success in ameliorating patient survival. The immunosuppressive tumor microenvironment, which is infiltrated by a variety of myeloid cells, has been considered a crucial obstacle to current treatment. Recently, immunotherapy, which has achieved great success in hematological malignancies and some solid cancers, has garnered extensive attention for the treatment of GBM. In this review, we will present evidence on the features and functions of different populations of myeloid cells, and on current clinical advances in immunotherapies for glioblastoma.

Effect of arteriosclerotic intracranial arterial vessel wall enhancement on downstream collateral flow.

BACKGROUND: The effect of arteriosclerotic intracranial arterial vessel wall enhancement (IAVWE) on downstream collateral flow found in vessel wall imaging (VWI) is not clear. Regardless of the mechanism underlying IAVWE on VWI, damage to the patient's nervous system caused by IAVWE is likely achieved by affecting downstream cerebral blood flow. The present study aimed to investigate the effect of arteriosclerotic IAVWE on downstream collateral flow. METHODS: The present study recruited 63 consecutive patients at the Second Hospital of Hebei Medical University from January 2021 to November 2021 with underlying atherosclerotic diseases and unilateral middle cerebral artery (MCA) M1-segment stenosis who underwent an magnetic resonance scan within 3 days of symptom onset. The patients were divided into 4 groups according to IAVWE and the stenosis ratio (Group 1, n = 17; Group 2, n = 19; Group 3, n = 13; Group 4, n = 14), and downstream collateral flow was analyzed using three-dimensional pseudocontinuous arterial spin labeling (3D-pCASL) and RAPID software. The National Institutes of Health Stroke Scale (NIHSS) scores of the patients were also recorded. Two-factor multivariate analysis of variance using Pillai's trace was used as the main statistical method. RESULTS: No statistically significant difference was found in baseline demographic characteristics among the groups. IAVWE, but not the stenosis ratio, had a statistically significant significance on the late-arriving retrograde flow proportion (LARFP), hypoperfusion intensity ratio (HIR), and NIHSS scores ( F = 20.941, P <0.001, Pillai's trace statistic = 0.567). The between-subject effects test showed that IAVWE had a significant effect on the three dependent variables: LARFP ( R2 = 0.088, F = 10.899, P = 0.002), HIR ( R2 = 0.234, F = 29.354, P <0.001), and NIHSS ( R2 = 114.339, F = 33.338, P <0.001). CONCLUSIONS: Arteriosclerotic IAVWE significantly reduced downstream collateral flow and affected relevant neurological deficits. It was an independent factor affecting downstream collateral flow and NIHSS scores, which should be a focus of future studies. TRIAL REGISTRATION: ChiCTR.org.cn, ChiCTR2100053661.

Mechanically Gated Transistor.

Silicon-based field effect transistors have underpinned the information revolution in the last 60 years, and there is a strong desire for new materials, devices, and architectures that can help sustain the computing power in the age of big data and artificial intelligence. Inspired by the Piezo channels, a mechanically gated transistor abandoning electric gating altogether, achieving an ON/OFF ratio over three orders of magnitude under a mechanical force of hundreds of nN is developed. The two-terminal device utilizes flexoelectric polarization induced by strain gradient, which modulates the carrier concentration in a Van der Waals structure significantly, and it mimics Piezo channels for artificial tactile perception. This simple device concept can be easily adapted to a wide range of semiconducting materials, helping promote the fusion between mechanics and electronics in a similar way as mechanobiology.

In vitro evaluation of electrospun polyvinylidene fluoride hybrid nanoparticles as direct piezoelectric membranes for guided bone regeneration.

A polyvinylidene fluoride (PVDF) piezoelectric membrane containing carbon nanotubes (CNTs) and graphene oxide (GO) additives was prepared, with special emphasis on the piezoelectric activity of the aligned fibers. Fibroblast viability on membranes was measured to study cytotoxicity. Osteoprogenitor D1 cells were cultured, and mineralization of piezoelectric composite membranes was assessed by ultrasound stimulation. Results showed that the electrospun microstructures were anisotropically aligned fibers. As the GO content increased to 1.0 wt% (0.2 wt% interval), the ß phase in PVDF slightly increased but showed the opposite trend with the increase in CNT. Excessive addition of GO and CNT hindered the growth of the ß phase in PVDF. The direct piezoelectric activity and mechanical properties showed the same trend as the ß phase in PVDF. Moreover, GO/PVDF with the same nanoparticle content showed better performance than CNT/PVDF composites. In this study, a comparison of the generated piezoelectric specific voltage (unit: 10-3 Vg-1 cm-2, linear stretch, g33) with control PVDF only (0.55 ± 0.16) revealed that the two composites containing 0.8 wt% GO- and 0.2 wt% CNT- with 15 wt% PVDF exhibited excellent piezoelectric voltages, which were 3.37 ± 1.05 and 1.45 ± 0.07 (10-3 Vg-1 cm-2), respectively. In vitro cultures of these two groups in contact with D1 cells showed significantly higher alkaline phosphatase secretion than the PVDF only group within 1-10 days of cell culture. Further application of ultrasound stimulation showed that the piezoelectric membrane differentiated D1 cells earlier than without ultrasound and induced higher proliferation and mineralization. This developing piezoelectric effect is expected to generate voltage through activities to enhance microcurrent stimulation in vivo.

High-Throughput Scanning Second-Harmonic-Generation Microscopy for Polar Materials.

The Materials Genome Initiative aims to discover, develop, manufacture, and deploy advanced materials at twice the speed of conventional approaches. To achieve this, high-throughput characterization is essential for the rapid screening of candidate materials. In this study, a high-throughput scanning second-harmonic-generation microscope with automatic partitioning, accurate positioning, and fast scanning is developed that can rapidly probe and screen polar materials. Using this technique, typical ferroelectrics, including periodically poled lithium niobate crystals and PbZr0.2 Ti0.8 O3 (PZT) thin films are first investigated, whereby the microscopic domain structures are clearly revealed. This technique is then applied to a compositional-gradient (100-x)%BaTiO3 -x%SrTiO3 film and a thickness-gradient PZT film to demonstrate its high-throughput capabilities. Since the second-harmonic-generation signal is correlated with the macroscopic remnant polarization over the probed region determined by the laser spot, it is free of artifacts arising from leakage current and electrostatic interference, while materials' symmetries and domain structures must be carefully considered in the data analysis. It is believed that this work can help promote the high-throughput development of polar materials and contribute to the Materials Genome Initiative.

Design and implementation of sequential excitation module for high fidelity piezoresponse force microscopy.

The acquisition of accurate information through a contact resonance mode is critical for mapping weak electromechanical effect reliably by using piezoresponse force microscopy (PFM). However, it is very challenging to track resonance frequency shifting when the contact stiffness from the sample varies significantly. In this work, we have developed a sequential excitation (SE) module to enable high fidelity PFM. A customized discrete frequency sweep signal from an arbitrary waveform generator is used for drive excitation so that resonance frequency tracking is no longer necessary. Furthermore, the AC component of the piezoresponse is sampled by using an oscilloscope instead of using lock-in amplifiers. To accommodate high volume of data acquisition, a fast analysis method is also developed to fit the transfer function of the cantilever efficiently on the fly during scanning. Hardware implementation and data processing are described in detail. The capability of our SE module has been demonstrated on an ordinary PMN-PT film via first and second harmonic PFM, as well as a suspended freestanding MoS2 membrane that is very challenging to probe due to its substantial variation in contact stiffness.

The Innate and Adaptive Immune Cells in Alzheimer's and Parkinson's Diseases.

Alzheimer's disease (AD) and Parkinson's disease (PD) are the most common neurodegenerative disorders of the central nervous system (CNS). Increasing evidence supports the view that dysfunction of innate immune cells initiated by accumulated and misfolded proteins plays essential roles in the pathogenesis and progression of these diseases. The TLR family was found to be involved in the regulation of microglial function in the pathogenesis and progression of AD or PD, making it as double-edged sword in these diseases. Altered function of peripheral innate immune cells was found in AD and PD and thus contributed to the development and progression of AD and PD. Alteration of different subsets of T cells was found in the peripheral blood and CNS in AD and PD. The CNS-infiltrating T cells can exert both neuroprotective and neurotoxic effects in the pathogenesis and progression. Here, we review recent evidences for the roles of innate and adaptive immune cells in the pathogenesis and progression of AD and PD.

Flexoelectric engineering of van der Waals ferroelectric CuInP2S6.

Van der Waals layered CuInP2S6 (CIPS) is an ideal candidate for developing two-dimensional microelectronic heterostructures because of its room temperature ferroelectricity, although field-driven polarization reversal of CIPS is intimately coupled with ionic migration, often causing erratic and damaging switching that is highly undesirable for device applications. In this work, we develop an alternative switching mechanism for CIPS using flexoelectric effect, abandoning external electric fields altogether, and the method is motivated by strong correlation between polarization and topography variation of CIPS. Phase-field simulation identifies a critical radius of curvature around 5 µm for strain gradient to be effective, which is realized by engineered topographic surfaces using silver nanowires and optic grating upon which CIPS is transferred to. We also demonstrate mechanical modulation of CIPS on demand via strain gradient underneath a scanning probe, making it possible to engineer multiple polarization states of CIPS for device applications.

The Application of Software "Rapid Processing of Perfusion and Diffusion" in Acute Ischemic Stroke.

In the event of an acute ischemic stroke, saving the penumbra is the most important aspect of early treatment. The rapid and accurate identification of ischemic penumbra plays a key role in its comprehensive treatment. At present, the identification method and evaluation standard of ischemic penumbra have not been unified. Numerous pieces of software identifying ischemic penumbra have been developed, such as rapid processing of perfusion and diffusion (RAPID), Sphere, Vitrea, and computed tomography perfusion+ (CTP+). The RAPID software, analyzing and integrating multi-mode image data (mainly based on perfusion weighted imaging (PWI) or computed tomography perfusion (CTP) images, shows good performance in identifying ischemic penumbra and has been utilized for the assessment of ischemic penumbra in many ischemic stroke clinical studies, achieving good outcomes and promoting the transition from "time window" to "tissue window" in the treatment of early stage AIS. To obtain a comprehensive understanding of the RAPID software and its accuracy in evaluating ischemic penumbra, this paper reviews the background and development of the RAPID software, summarizes the published acute cerebral infarction trials using the RAPID software, generalizes the threshold parameters in different time windows, and further discusses its application and limitations.

Br Vacancy Defects Healed Perovskite Indoor Photovoltaic Modules with Certified Power Conversion Efficiency Exceeding 36.

Indoor photovoltaics (IPVs) are expected to power the Internet of Things ecosystem, which is attracting ever-increasing attention as part of the rapidly developing distributed communications and electronics technology. The power conversion efficiency of IPVs strongly depends on the match between typical indoor light spectra and the band gap of the light absorbing layer. Therefore, band-gap tunable materials, such as metal-halide perovskites, are specifically promising candidates for approaching the indoor illumination efficiency limit of ∼56%. However, perovskite materials with ideal band gap for indoor application generally contain high bromine (Br) contents, causing inferior open-circuit voltage (VOC ). By fabricating a series of wide-bandgap perovskites (Cs0.17 FA0.83 PbI3- x Brx , 0.6 ≤ x ≤ 1.6) with varying Br contents and related band gaps, it is found that, the high Br vacancy (VBr ) defect density is a significant reason that leading to large VOC deficits apart from the well-accepted halide segregation. The introduction of I-rich alkali metal small-molecule compounds is demonstrated to suppress the VBr and increase the VOC of perovskite IPVs up to 1.05 V under 1000 lux light-emitting diode illumination, one of the highest VOC values reported so far. More importantly, the modules are sent for independent certification and have gained a record efficiency of 36.36%.