Link N suppresses interleukin-1ß-induced biological effects on human osteoarthritic cartilage.

Osteoarthritis (OA) is a disease of diarthrodial joints associated with extracellular matrix proteolytic degradation under inflammatory conditions, pain and disability. Currently, there is no therapy to prevent, reverse or modulate the disease course. The present study aimed at evaluating the regenerative potential of Link N (LN) in human OA cartilage in an inflammatory milieu and determining if LN could affect pain-related behaviour in a knee OA mouse injury model. Osteo-chondro OA explants and OA chondrocytes were treated with LN in the presence of interleukin-1ß (IL-1ß) to simulate an osteoarthritic environment. Quantitative von Frey polymerase chain reaction and Western blotting were performed to determine the effect of LN on matrix protein synthesis, catabolic enzymes, cytokines and nerve growth factor expression. Partial medial meniscectomy (PMM) was performed on the knee of C57BL/6 mice and, 12 weeks post-surgery, mice were given a 5 µg intra-articular injection of LN or phosphate-buffered saline. A von Frey test was conducted over 24 h to measure the mechanical allodynia in the hind paw. LN modulated proteoglycan and collagen synthesis in human OA cartilage through inhibition of IL-1ß-induced biological effects. LN also supressed IL-1ß-induced upregulation of cartilage-degrading enzymes and inflammatory molecules in OA chondrocytes. Upon investigation of the canonical signalling pathways IL-1ß and nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB), LN resulted to significantly inhibit NF-κB activation in a dose-dependent manner. In addition, LN suppressed mechanical allodynia in an OA PMM mouse model. Results supported the concept that LN administration could provide therapeutic potential in OA.

Wear particles from metal-on-metal total hip replacements: effects of implant design and implantation time.

Detailed characterization of wear particles is necessary to understand better the implant wear mechanisms and the periprosthetic tissue response. The purposes of the present study were to compare particle characteristics of current with older designs of metal-on-metal (MM) total hip replacements (THRs), and to determine the effect of implantation time on wear particle characteristics. Metal wear particles isolated from periprosthetic tissues from 19 patients with MM THRs of current and older designs and at different implantation times (very short, longer, and very long) were studied using transmission electron microscopy and energy dispersive X-ray analysis. The particles from the current design implants with implantation times of not more than 15 months (very short-term) were almost exclusively round to oval chromium oxide particles. In all other cases, although the predominance was still round to oval chromium oxide particles, greater proportions of cobalt-chromium-molybdenum (Co-Cr-Mo) particles, mainly needle-shaped, were detected. Very long-term THRs implanted for more than 20 years had the highest percentage of needle-shaped Co-Cr-Mo particles. Particle lengths were not markedly different between the different designs and implantation times except for the current design implants of not more than 15 months, which had a significantly smaller mean length of 39 nm. In conclusion, the implant design did not seem to have a significant influence on particle characteristics whereas the implantation time appeared to have the most effect on the particles. It should be noted that, because of the limited number of tissue retrievals available, some uncertainty remains regarding the generality of these findings.

Induction of macrophage apoptosis by ceramic and polyethylene particles in vitro.

The purpose of this study was to investigate in vitro the presence of apoptotic cell death after macrophage stimulation with different ceramic (Al2O3 and ZrO2) and high density polyethylene (HDP) particles. We also analyzed the effects of particle size, concentration, and composition. The J774 mouse macrophage cell line was exposed to commercial particles of different sizes (up to 4.5 microm) and concentrations (up to 500 particles per macrophage). Fluorescence microscopy and DNA laddering were used to investigate the presence of apoptosis in cell cultures after 24 h of incubation. Fluorescence microscopy of propidium iodide stained cells showed two characteristic morphological features that occur in apoptotic cells, namely nuclear condensation and heterogeneity of stain uptake. The effect of ceramic particles on apoptotic nuclear morphology was size- and concentration-dependent and reached a plateau above 150 particles per macrophage at 1.3 microm. With regards to composition, we did not find any difference in cell morphology between Al2O3 and ZrO2. Ceramic and HDP particles induced DNA fragmentation into oligonucleosomes as evidenced by DNA laddering, another characteristic of apoptosis. The induction of DNA laddering was size- and concentration-dependent whereas particle composition (Al2O3 vs. ZrO2 and Al2O3 vs. HDP) had no effect. In conclusion, our results demonstrated that ceramic and HDP particles induce macrophage apoptotic cell death in vitro and open doors for possible modulation of debris-induced periprosthetic osteolysis.

Collagen crosslinked N-telopeptides as markers for evaluating particulate osteolysis: a preliminary study.

The purpose of this study was to determine whether a marker of bone resorption could be used noninvasively to diagnose and assess treatment of periprosthetic osteolysis. The crosslinked N-telopeptide marker of osteoclast-mediated bone resorption potentially has the sensitivity to detect periprosthetic osteolysis. Second-morning urine specimens were obtained from (a) seven age-matched controls, (b) eight patients who had a hip arthroplasty, hybrid implants at least 1 year after surgery, and no osteolysis, (c) 11 patients who had a hip arthroplasty and osteolysis, and (d) 10 patients who had a hip arthroplasty and with osteolysis before and after 6 weeks of oral Fosamax (alendronate) treatment. The Fosamax treatment consisted of one 10-mg dose per day for 6 weeks. Men and young women (less than 40 years old) were chosen for this study to avoid bone resorption enhanced after menopause as a possible confounder. An enzyme-linked immunosorbent assay technique for quantifying crosslinked N-telopeptides of type-I collagen was performed on all specimens. The patients with osteolysis had significantly elevated levels of N-telopeptide compared with the implant control group. In addition, levels of N-telopeptide were significantly lowered after Fosamax treatment. These findings indicate that a systemic bone-resorption marker (N-telopeptide) can be used to evaluate local particulate-induced osteolysis and its treatment. The study also provides clinical evidence that osteolysis is associated with increased osteoclast-mediated bone resorption and that this locally induced bone resorption can be suppressed by certain bisphosphonates (Fosamax). These insights have potential value in the understanding and clinical management of aseptic loosening.

Autogenous bone grafts from the femoral head for the treatment of acetabular deficiency in primary total hip arthroplasty with cement. Long-term results.

Thirty-five consecutive total hip arthroplasties in twenty-eight patients were performed with use of cement and insertion of an autogenous graft from the femoral head. Five patients (six hips) subsequently died or were lost to follow-up. The results for the remaining twenty-three patients (twenty-nine hips) were reviewed retrospectively at a mean of eleven years (range, seven to seventeen years) after the operation. All of the grafts united. The mean estimated coverage of the acetabular component by the autogenous graft was 27 per cent (range, 15 to 45 per cent). Three sockets (10 per cent) were revised because of symptomatic loosening without infection at a mean of ten years (eight, ten, and twelve years) after the index procedure. All three hips were found to have viable, bleeding bone in the region of the remaining graft. An additional eight acetabular components had a nonprogressive, asymptomatic, continuous radiolucent line at the cement-bone interface. This finding was assumed to indicate loosening of the socket, so the total prevalence of loosening was 38 per cent (eleven of twenty-nine sockets). There was no significant difference between the loose and the well fixed components in terms of the amount of coverage by the graft (p > 0.2) or the method of fixation (p > 0.4). There was no collapse or resorption of the graft that was of mechanical consequence. Autogenous femoral-head bone-grafting is a useful technique with a good potential for long-term success when the amount of coverage by the graft is limited to less than 40 per cent of the surface of the acetabular component.

Ceramic-ceramic and metal-polyethylene total hip replacements: comparison of pseudomembranes after loosening.

We made a semiquantitative study of the comparative histology of pseudomembranes from 12 loose cemented ceramic-ceramic and 18 metal-polyethylene total hip replacements. We found no significant difference in cellular reaction between the two groups, but there was a major difference in the origin of the particulate debris. In the metal-polyethylene group, polyethylene of articular origin was predominant, while in the ceramic-ceramic group the cellular reaction appeared to be a response to zirconia ceramic particles used to opacify cement used for fixation. Isolation and characterisation of the debris showed that the zirconia particles formed the greatest proportion (76%) in ceramic-ceramic hips, while alumina debris of articular origin formed only 12%. Our study has indicated that aseptic loosening of ceramic cups is not due to a response to debris generated at the articular interface, but to mechanical factors which lead to fragmentation of the cement.

Cytotoxicity and macrophage cytokine release induced by ceramic and polyethylene particles in vitro.

Although the response of macrophages to polyethylene debris has been widely studied, it has never been compared with the cellular response to ceramic debris. Our aim was to investigate the cytotoxicity of ceramic particles (Al2O3 and ZrO2) and to analyse their ability to stimulate the release of inflammatory mediators compared with that of high-density polyethylene particles (HDP). We analysed the effects of particle size, concentration and composition using an in vitro model. The J774 mouse macrophage cell line was exposed to commercial particles in the phagocytosable range (up to 4.5 microns). Al2O3 was compared with ZrO2 at 0.6 micron and with HDP at 4.5 microns. Cytotoxicity tests were performed using flow cytometry and macrophage cytokine release was measured by ELISA. Cell mortality increased with the size and concentration of Al2O3 particles. When comparing Al2O3 and ZrO2 at 0.6 micron, we did not detect any significant difference at the concentrations analysed (up to 2500 particles per macrophage), and mortality remained very low (less than 10%). Release of TNF-alpha also increased with the size and concentration of Al2O3 particles, reaching 195% of control (165 pg/ml v 84 pg/ml) at 2.4 microns and 350 particles per cell (p < 0.05). Release of TNF-alpha was higher with HDP than with Al2O3 particles at 4.5 microns. However, we did not detect any significant difference in the release of TNF-alpha between Al2O3 and ZrO2 at 0.6 micron (p > 0.05). We saw no evidence of release of interleukin-1 alpha or interleukin-1 beta after exposure to ceramic or HDP particles.

Polyethylene and metal debris generated by non-articulating surfaces of modular acetabular components.

We report a prospective study of the liner-metal interfaces of modular uncemented acetabular components as sources of debris. We collected the pseudomembrane from the screw-cup junction and the empty screw holes of the metal backing of 19 acetabula after an average implantation of 22 months. Associated osteolytic lesions were separately collected in two cases. The back surfaces of the liners and the screws were examined for damage, and some liners were scanned by electron microscopy. The tissues were studied histologically and by atomic absorption spectrophotometry to measure titanium content. The pseudomembrane from the screw-cup junction contained polyethylene debris in seven specimens and metal debris in ten. The material from empty screw holes was necrotic tissue or dense fibroconnective tissue with a proliferative histiocytic infiltrate and foreign-body giant-cell reaction. It contained polyethylene debris in 14 cases and metal in five. The two acetabular osteolytic lesions also showed a foreign-body giant-cell reaction to particulate debris. The average titanium levels in pseudomembranes from the screw-cup junction and the empty screw holes were 959 micrograms/g (48 to 11,900) and 74 micrograms/g (0.72 to 331) respectively. The tissue from the two lytic lesions showed average titanium levels of 139 and 147 micrograms/g respectively. The back surfaces of the PE liners showed surface deformation, burnishing, and embedded metal debris. All 30 retrieved screws demonstrated fretting at the base of the head and on the proximal shaft. Non-articular modular junctions create new interfaces for the generation of particulate debris, which may cause granulomatous reaction.

The rationale for cemented total hip arthroplasty.

Long-term follow-up of early Charnley cemented THAs demonstrates excellent survival (Table 1). New techniques in cementing have improved the quality of the femoral cement fixation and have shown consistently good performance at 10-year follow-up. Noncemented designs have not yet demonstrated similar long-term results. Recent reports reveal osteolysis in noncemented prostheses, which is observed earlier than in cemented designs. This implies a greater role for polyethylene debris in the etiology of osteolysis. Polyethylene debris is produced not only at the articulation but also at the nonarticular metal-polyethylene interface in modular metal-backed acetabular components. This results in the production of additional plastic debris. Metal backing has not demonstrated any clinical improvement in the long-term performance of cemented acetabular components. Furthermore, it may be detrimental due to decreased polyethylene thickness, increased stress within the polyethylene, and an increased rate of polyethylene wear of both the articular and nonarticular surfaces. Multiple reports have demonstrated that titanium alloy is not an acceptable articulating surface because it has a poor resistance to abrasion. It can result in severe metallosis in the periarticular tissues, leading to progressive osteolysis and early failure of the arthroplasty. Caution is suggested in the widespread application of polymodular femoral components because the production of metallic debris may prove excessive. Cemented THA remains the gold standard by which other methods of fixation must be assessed. The enviable long-term results with early cementing techniques and the Charnley prosthesis will be difficult to match, even with developing technology.

[Comparative biomechanical evaluation of the immediate stability of three fixators in arthrodesis of the ankle]. / Evaluation biomécanique comparative de la stabilité immédiate de trois fixateurs dans l'arthrodèse de la cheville.

The best type of osteosynthesis for ankle arthrodesis is controversial. Arthrodesis was performed on 21 cadaveric ankles using either the T-plate compression device, crossed cancellous-bone screws or the Charnley external fixator. The instrumented ankles were tested in five degrees of freedom. Internal fixation was more stable. More specifically, the compression T-plate was the most stable, and the Charnley external fixator was the least stable, for all degrees of freedom tested. In addition to the multiple clinical advantages of internal fixation, the results of our study support its use as a method of obtaining the most stable immediate fixation for ankle arthrodesis.

Effect of a Type II Collagen Fragment on the Expression of Genes of the Extracellular Matrix in Cells of the Intervertebral Disc.

Knowledge of factors regulating the turnover, repair, and degeneration of the intervertebral disc (IVD) is lacking. Although type II collagen (CII) fragments accumulate in the degenerative IVD, little is known of how they affect the degenerative process. A better understanding of the cellular interactions with fragments of matrix molecules are a key factor in promoting therapies for degenerative disc diseases. In the present study, we have investigated the effect of the CII (245-270) peptide on the expression of matrix molecules, proteinases, and interleukin genes in cells of the IVD. Cells isolated from the nucleus pulposus (NP) and annulus fibrosus (AF) of adult bovine tails were cultured up to 8 days in the absence (control) or presence of the CII (245-270) peptide. RT-PCR was used to analyze the expression of the different genes. Exposure of these cells to the CII (245-270) peptide led to a transient up-regulation of the aggrecan gene in AF cells while this up-regulation was maintained for a longer time in NP cells. The fragment also enhanced a transient up-regulation of the type II collagen gene in AF cells but had no effect in NP cells. The peptide enhanced transiently the expression of matrix metalloproteinase (MMP)-1 and cathepsin K genes in both AF and NP cells whereas it increased MMP-13 expression only in NP cells. The peptide up-regulated tissue inhibitor of metalloproteinase (TIMP)-1, TIMP-2, and TIMP-3 gene expression on day 1 in AF cells but had very little effect on their expression in NP cells. Finally, the CII (245-270) peptide had no effect on IL-6 expression while IL-1alpha was not expressed in these cells. In conclusion, our results showed that the CII (245-270) peptide differentially alter the expression of genes in bovine AF and NP cells and suggest that degradation products of collagen may be involved in the regulation of IVD homeostasis.

Recurrent massive subperiosteal hemorrhage in a patient with neurofibromatosis: a case report.

The authors report a rare complication of neurofibromatosis, recurrent rapidly expanding massive subperiosteal hematomas, in the thigh of a 22-year-old woman. The diagnosis was confirmed by plain radiography, ultrasonography and computed tomography. The first two hematomas were drained through a longitudinal lateral incision, tightly closing the periosteum over drains and applying a compression dressing postoperatively. The third hematoma was treated expectantly. Recurrent subperiosteal hematomas may lead to the formation of huge bone cysts and grotesque limb deformity, for which amputation may be the only solution.

Characterization of in vivo wear debris from ceramic-ceramic total hip arthroplasties.

In contrast to the much-studied mechanism of aseptic loosening of the metal-polyethylene joint couple, the mechanism responsible for failure of ceramic-ceramic (CC) total hip arthroplasties (THAs) has not been evaluated. The aim of this study was to conduct a systematic characterization of the in vivo wear debris from 15 cases of CC THAs revised for aseptic loosening. Two methods were used to evaluate the wear debris; a semiquantitative histological analysis of H&E-stained periprosthetic pseudomembranes; and an evaluation of isolated debris particles using SEM, energy-dispersive X-ray analysis, and image analysis. The three main types of particulate debris identified were titanium alloy (TiAlV) and alumina ceramic (Al2O3) of prosthetic origin, and zirconium dioxide (ZrO2) from the contrast agent used in the cement for prosthetic fixation. Alumina debris was present in the smallest proportion (12%) and was consistent with the low wear rate of the CC joint couple. Zirconium dioxide debris was present in the greatest proportion (76%) and was an unexpected finding. The ZrO2 debris represented microstructural grains of the original ZrO2 particles added as contrast agent to the cement. The presence of a histiocytic foreign body reaction to ZrO2 debris on histologic sections leads us to believe that these particles play an important role in aseptic loosening of the CC THAs evaluated in this study.

Cemented total hip arthroplasty in patients with osteonecrosis. A 6-year minimum follow-up study of second-generation cement techniques.

Twenty patients with osteonecrosis of the femoral head underwent 28 total hip arthroplasties using cement from 1981 to 1985. Femoral reconstruction was by use of second-generation cement techniques. Twenty-four hips in 17 patients were available for review at a mean follow-up period of 7.7 years. The mean age at surgery was 55 years. Clinical evaluation demonstrated 79% excellent, 4% good, and 4% fair results. Three hips (12.5%) required revision for loosening. The cumulative probability of survival was estimated to be 85.7% at 10 years. Second-generation cement techniques and implant designs did improve the clinical results in this high-risk group; however, the overall mechanical failure rate remained high.

Flow cytometric analysis of macrophage response to ceramic and polyethylene particles: effects of size, concentration, and composition.

Using the J774 macrophage cell line, we designed an in vitro model to analyze by flow cytometry the effects of size, concentration, and composition of ceramic (Al2O3 and ZrO2) and high density polyethylene (HDP) particles on phagocytosis and cell mortality. Inflammatory mediator (TNF-alpha) also was measured by ELISA. Kinetic studies revealed that phagocytosis of the particles begins very early after cell exposure, increasing with time and particle concentration and reaching a plateau after 15 h. This implies that the optimum period to evaluate cellular response to particulate debris is between 15 and 24 h of incubation. Results also showed that phagocytosis increases with concentration for particles up to 2 microns. For larger particles (up to 4.5 microns), phagocytosis seems to reach a plateau independent of size and concentration, which suggests a saturation of phagocytosis that is most likely dependent on overall particle volume ingested. We did not detect any significant difference in phagocytosis between Al2O3 and ZrO2 at 0.6 microns. Al2O3 seems to be more easily phagocytosed than HDP at the same size (4.5 microns) and concentrations. Cytotoxicity studies revealed that macrophage mortality increases with particle size and concentration for sizes greater than 2 microns. Smaller particles (0.6 microns) cause cell mortality only at higher concentrations (from 1,250 particles per cell), but the mortality is still very low (10%). No significant difference in cell mortality and TNF-alpha release was found between Al2O3 and ZrO2. Effects of Al2O3 and HDP at 4.5 microns were compared by measuring TNF-alpha release. Results showed that TNF-alpha release increases with particle concentrations and is higher with HDP than with Al2O3.

Complications of femoral and acetabular modularity.

The versatility of modular total hip arthroplasties have rapidly extended their applications. However, these new interfaces can lead to complications that were not observed with monolithic components. These problems have been noted with modular femoral and acetabular components and have been associated with the generation of particulate debris. This article reviews the authors' clinical observations and histologic, biomechanic, and spectophotometric evaluations of modular total hip arthroplasties. New data comparing both synovial fluid metal levels in well-fixed and loose monolithic and modular prosthetic hip implants are presented. In modular total hip components, synovial fluid cobalt levels correlated positively with patient weight and length of implantation. The generation of particulate debris in modular total hip components may induce periprosthetic osteolysis. Taper locks for femoral components and locking mechanisms for the polyethylene liner and metallic cup must be designed to avoid the production of particulate debris.

Apoptosis in interface membranes of aseptically loose total hip arthroplasty.

The terminal events leading to periprosthetic osteolysis are multifactorial in nature and modulation of this process after the stage of osteolytic mediator release has been futile. Recently, the demonstration of the ability of bisphosphonates to inhibit bone resorption that is mediated by particle-stimulated macrophages and their induction of osteoclast apoptosis suggests a potent area for modulation of osteolysis at the prosthesis-bone interface. The purpose of this study was to determine the mode of cell death that occurs at the osteolytic interface of failed total hip arthroplasty (THA). TUNEL staining, DNA laddering, and immunodetection of poly(ADP-ribose)polymerase (PARP) protein were used to identify the presence of apoptosis in interface membranes from 25 patients aged 28-88 years old (mean, 58 years) harvested at the time of hip revision surgery. Our results demonstrated positive TUNEL stain in 100% of specimens with an average 37% of cells (range 12-60%) positively stained for TUNEL whereas less than 8% of control tissue cells showed positive staining. DNA laddering, a characteristic feature of apoptotic cells, was observed in 82% (28/34) of specimens studied at both the acetabular and femoral side of aseptically loose THAs. No laddering was observed in control tissues. Finally, using Western blot analysis, we observed the appearance of the 89 kDa PARP fragment associated with apoptosis in 92% of specimens (30/33). Our results demonstrate the presence of apoptotic cell death in interface membranes of THAs suggesting that apoptosis-related events are indeed associated with periprosthetic osteolysis and could serve as a specific target point for therapeutic modulation.

Cytotoxic and apoptotic effects of cobalt and chromium ions on J774 macrophages - Implication of caspase-3 in the apoptotic pathway.

The aim of this study was to evaluate the cytotoxic and apoptotic effects of cobalt and chromium ions on macrophages in vitro, and analyze the implication of caspase-3 in the apoptotic pathway. J774 mouse macrophages (5 x 10(5) cells/ml) were exposed for up to 24 h to 0-10 ppm Co2+ and 0-500 ppm Cr3+. The cytotoxic effect of ions was measured by Trypan blue exclusion. DNA analysis on agarose gel was used as a specific test for detection of DNA fragmentation into oligonucleosomes that occurs in apoptotic cells. The proteolytic cleavage of poly(ADP-ribose)polymerase (PARP), closely associated with the induction of apoptosis, was also analyzed along with the appearance of the active fragment of caspase-3, implicated in several apoptosis pathways. Results demonstrated that both Co2+ and Cr3+ ions induce macrophage mortality in a dose-dependent manner. However, Co2+ is more toxic inducing a cell mortality up to 28% with only 10 ppm vs. 37% with 500 ppm of Cr3+. DNA analysis demonstrated that both Co2+ and Cr3+ ions induce DNA fragmentation, between 6-10 ppm Co2+ and 250-500 ppm Cr3+ after 24 h incubation. PARP cleavage and the appearance of caspase-3 active fragment were observed after 6 h with both Co+ and Cr3+ ions, with a stronger signal after 24 h and 10 ppm of Co2+ or 500 ppm of Cr3+. In conclusion, this study demonstrates that after 24 h incubation, both Co2+ and Cr3+ ions can induce macrophage mortality, and more specifically apoptosis. The results also suggest that apoptosis occurs via a caspase-3 pathway. However, the relative importance of necrosis and apoptosis and the effects of longer exposure times on the induction of macrophage death by these metal ions remain to be investigated.

Effects of digestion protocols on the isolation and characterization of metal-metal wear particles. II. Analysis of ion release and particle composition.

The isolation of metal wear particles from hip simulator lubricants is important for understanding wear mechanisms and the tissue response to particulate material. Part I of this study demonstrated that isolation protocols involving digestion reagents can chemically attack metal-metal wear particles, reducing their size and changing their shape. In part II of this study, Co and Cr ion concentrations in solution after each digestion protocol were measured by flame atomic absorption spectrometry, and wear particle composition was determined by X-ray analysis spectra. The exposure of wear particles in water to alkaline solutions caused an increasing release of Cr ions in solution with alkaline concentration and time, and a corresponding decrease in particle Cr peak intensity on X-ray spectra. As a result, particles exposed to 12N KOH for 48 h displayed Co peaks and no Cr. In contrast, enzymatic protocols caused a release of Co ions in solution and a corresponding decrease in particle Co peak intensity on X-ray spectra, especially with sodium phosphate as a buffer. However, when isolating particles from 95% serum, there was an initial protective effect of serum proteins, presumably because of their binding to Co and Cr. As a result, the extent of Cr ion release from metal wear particles in 95% serum after alkaline treatments was diminished, although still present, whereas both enzymatic protocols resulted in a negligible release of Co and Cr ions into solution. Particle composition analysis after enzymatic treatments revealed the presence of chromium oxide particles and CoCrMo particles with variable Co/Cr ratios. After alkaline treatments, the chromium oxide particles increasingly disappeared with time and alkaline concentration, demonstrating a change in particle composition after these treatments. This study demonstrated that digestion reagents can induce chemical changes that affect particle composition. Of all the protocols tested, the enzymatic protocols were the least damaging to the particles and appeared to be the best compromise for isolation and characterization of metal particles, especially in 95% serum. Special care on the choice of buffers should be taken when isolating particles from a lower concentration of serum.

Effects of digestion protocols on the isolation and characterization of metal-metal wear particles. I. Analysis of particle size and shape.

Isolation of metal wear particles from hip simulator lubricants or tissues surrounding implants is a challenging problem because of small particle size, their tendency to agglomerate, and their potential for chemical degradation by digestion reagents. To provide realistic measurements of size, shape, and composition of metal wear particles, it is important to optimize particle isolation and minimize particle changes due to the effects of the reagents. In this study (Part I of II), transmission electron microscopy (TEM) was used to examine and compare the effects of different isolation protocols, using enzymes or alkaline solutions, on the size and shape of three different types of cobalt-based alloy particles produced from metal-metal bearings. The effect on particle composition was examined in a subsequent study (Part II). Large particles (<1200 nm) were generated by dry abrasion of CoCrMo alloy against itself and small particles (<300 nm) were generated by hip simulator testing of a metal-metal implant pair in the presence of either distilled-deionized water or a 95% bovine serum solution. The reagents changed particle size and to a lesser extent particle shape. For both large particles and small particles generated in water, the changes in size were more extensive after alkaline than after enzymatic protocols and increased with alkaline concentration and time in solution, up to twofold at 2 h and threefold at 48 h. However, when isolating particles from 95% serum, an initial protective effect of serum proteins and/or lipids was observed. Because of this protective effect, there was no significant difference in particle size and shape for both oval and needle-shaped particles after 2 h in 2N KOH and after enzymatic treatments. However, round particles were significantly smaller after 2 h in 2N KOH than after enzymatic treatments. Particle composition may also have been affected by the 2N KOH treatment, as suggested by a difference in particle contrast under TEM, an issue examined in detail in Part II.