RESUMEN
The adsorption of a sunflower protein extract at two air-water and oil-water interfaces is investigated using tensiometry, dilational viscoelasticity, and ellipsometry. For both interfaces, a three step mechanism was evidenced thanks to master curve representations of the data taken at different aging times and protein concentrations. At short times, a diffusion limited adsorption of proteins at interfaces is demonstrated. First, a two-dimensional protein film is formed with a partition of the polypeptide chains in the two phases that depends strongly on the nature of the hydrophobic phase: most of the film is in the aqueous phase at the air-water interface, while it is mostly in the organic phase at the oil-water interface. Then a three-dimensional saturated monolayer of proteins is formed. At short times, adsorption mechanisms are analogous to those found with typical globular proteins, while strong divergences are observed at longer adsorption times. Following the saturation step, a thick layer expands in the aqueous phase and appears associated with the release of large objects in the bulk. The kinetic evolution of this second layer is compatible with a diffusion limited adsorption of the minor population of polymeric complexes with hydrodynamic radius RH â¼ 80 nm, evidenced in equilibrium with hexameric globulins (RH â¼ 6 nm) in solution. These complexes could result from the presence of residual polyphenols in the extract and raise the question of the role of these compounds in the interfacial properties of plant protein extracts.
Asunto(s)
Helianthus , Agua , Adsorción , Propiedades de Superficie , TensoactivosRESUMEN
Biological or artificial microswimmers move performing trajectories of different kinds such as rectilinear, circular, or spiral ones. Here, we report on circular trajectories observed for active Janus colloids trapped at the air-water interface. Circular motion is due to asymmetric and nonuniform surface properties of the particles caused by fabrication. Motion persistence is enhanced by the partial wetted state of the Janus particles actively moving in two dimensions at the air-water interface. The slowing down of in-plane and out-of-plane rotational diffusions is described and discussed.
RESUMEN
Gene therapy is based on nucleic acid delivery to pathogenic cells in order to modulate their gene expression. The most used non viral vectors are lipid-based nanoaggregates, which are safer than viral carriers and have been shown to assemble easily with both DNA and RNA. However, the transfection efficiency of non viral carriers still needs to be improved before intensive practise in clinical trials can be implemented. For this purpose, the in depth characterization of the complexes formed by nucleic acids and their transporters is of great relevance. In particular, information on the structure and assembly mechanism can be useful to improve our general knowledge of these artificial transfection agents. In this paper, the complexation mechanism of short interfering RNA and DNA molecules (siRNA and siDNA, respectively) with cationic micelles is investigated by combining small angle X-ray scattering experiments and molecular dynamics simulations. Micelles were obtained by Gemini surfactants with different spacer lengths (12-3-12, 12-6-12). The siRNA and siDNA used were double strand molecules characterized by the same length and homologous sequence, in order to perform a close comparison. We showed that complexes appear in solution immediately after mixing and, therefore, the investigation of complex formation requires fast experimental techniques, such as time resolved synchrotron SAXS (Tr-SAXS). The obtained systems had internal arrangement constituted by layers of squeezed micelles alternating the nucleic acids. Both SAXS and MD analyses allowed us to evaluate the mean size of complexes in the range of a few nanometers, with looser and less ordered stacking for the DNA containing aggregates.
Asunto(s)
ADN/química , Micelas , Modelos Químicos , Oligonucleótidos/química , ARN Bicatenario/química , Oligonucleótidos/metabolismo , Sincrotrones , TiempoRESUMEN
The dynamics of colloidal particles at interfaces between two fluids plays a central role in microrheology, encapsulation, emulsification, biofilm formation, water remediation and the interface-driven assembly of materials. Common intuition corroborated by hydrodynamic theories suggests that such dynamics is governed by a viscous force lower than that observed in the more viscous fluid. Here, we show experimentally that a particle straddling an air/water interface feels a large viscous drag that is unexpectedly larger than that measured in the bulk. We suggest that such a result arises from thermally activated fluctuations of the interface at the solid/air/liquid triple line and their coupling to the particle drag through the fluctuation-dissipation theorem. Our findings should inform approaches for improved control of the kinetically driven assembly of anisotropic particles with a large triple-line-length/particle-size ratio, and help to understand the formation and structure of such arrested materials.
RESUMEN
The interface between two fluids is never flat at the nanoscale, and this is important for transport across interfaces. In the absence of any external field, the surface roughness is due to thermally excited capillary waves possessing subnanometric amplitudes in the case of simple liquids. Here, we investigate the effect of ultrasound on the surface roughness of liquid-gas and liquid-liquid interfaces. Megahertz (MHz) frequency ultrasound was applied normal to the interface at relatively low ultrasonic pressures (<0.6 MPa), and the amplitudes of surface fluctuations have been measured by light reflectivity and ellipsometry. We found a dramatic enhancement of surface roughness, roughly linear with intensity, with vertical displacements of the interface as high as 50-100 nm. As a consequence, the effective contact area between two fluids can be increased by ultrasound. This result has a clear impact for enhancing interface based processes such as mass or heat transfer.
RESUMEN
A mild and simple way to prepare stable aqueous colloidal suspensions of composite particles made of a cellulosic material (Sigmacell cellulose) and multiwalled carbon nanotubes (MWCNTs) is reported. These suspensions can be dried and redispersed in water at pH 10.5. Starting with rather crude initial materials, commercial Sigmacell cellulose and MWCNTs, a significant fraction of composite dispersed in water could be obtained. The solid composites and their colloidal suspensions were characterized by electronic microscopy, thermal analyses, FTIR and Raman spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and light scattering. The composite particles consist of tenuous aggregates of CNTs and cellulose, several hundred nanometers large, and are composed of 55 wt % cellulose and 45 wt % CNTs. Such particles were shown to stabilize cyclohexane-in-water emulsions. The adsorption and the elasticity of the layer they form at interface were characterized by the pendant drop method. The stability of the oil-in-water emulsions was attributed to the formation of an elastic network of composite particles at interface. Cyclohexane droplet diameters could be tuned from 20 to 100 µm by adjusting the concentration of composite particles. This behavior was attributed to the limited coalescence phenomenon, just as expected for Pickering emulsions. Interestingly, cyclohexane droplets were stable over time and sustained pH modifications over a wide range, although acidic pH induced accelerated creaming. This study points out the possibility of combining crude cellulose and MWCNTs through a simple process to obtain colloidal systems of interest for the design of functional conductive materials.
RESUMEN
Janus colloidal particles show remarkable properties in terms of surface activity, self-assembly and wetting. Moreover they can perform autonomous motion if they can chemically react with the liquid in which they are immersed. In order to understand the self-propelled motion of catalytic Janus colloids at the air-water interface, wetting and the orientation of the catalytic surface are important properties to be investigated. Wetting plays a central role in active motion since it determines the contact between the fuel and the catalytic surface as well as the efficiency of the transduction of the chemical reaction into motion. Active motion is not expected to occur either when the catalytic face is completely out of the aqueous phase or when the Janus boundaries are parallel to the interfacial plane. The design of a Janus colloid possessing two hydrophilic faces is required to allow the catalytic face to react with the fuel (e.g. H2O2 for platinum) in water and to permit some rotational freedom of the Janus colloid in order to generate propulsion parallel to the interfacial plane. Here, we discuss some theoretical aspects that should be accounted for when studying Janus colloids at the surface of water. The free energy of ideal Janus colloidal particles at the interface is modeled as a function of the immersion depth and the particle orientation. Analytical expressions of the energy profiles are established. Energetic aspects are then discussed in relation to the particle's ability to rotate at the interface. By introducing contact angle hysteresis we describe how the effects of contact line pinning modifies the scenario described in the ideal case. Experimental observations of the contact angle hysteresis of Janus colloids at the interface reveal the effect of pinning; and orientations of silica particles half covered with a platinum layer at the interface do not comply with the ideal scenarios. Experimental observations suggest that Janus colloids at the fluid interface behave as a kinetically driven system, where the contact line motion over the defects decorating the Janus faces rules the orientation and rotational diffusion of the particle.
RESUMEN
Several techniques to assemble artificial lipid bilayers involve the zipping of monolayers. Their efficiency is determined by the renewal of the saturated monolayers to be zipped and this proceeds by adsorption of lipids dispersed in oil as aggregates. The size of these lipids aggregates is a key parameter to ensure both the stability of the suspension and a fast release of lipids at the interface. We propose a new method inspired from the solvent-shifting nucleation process allowing to control and tune the lipid aggregates size and that improves the production of artificial membranes. It is simpler and faster than current methods starting from a dry lipid film, which are highly sensitive to environmental conditions. This method opens the route to bilayer production processes with new potentialities in membrane composition.
Asunto(s)
Membrana Dobles de Lípidos/síntesis química , Adsorción , Membrana Dobles de Lípidos/química , Membranas Artificiales , Aceites de Silicona/químicaRESUMEN
Surface activity and micelle formation of alkylguanidinium chlorides containing 10, 12, 14 and 16 carbon atoms in the hydrophobic tail were studied by combining conductivity and surface tension measurements with isothermal titration calorimetry. The purity of the resulting surfactants, their temperatures of CrâLC and LCâI transitions, as well as their propensity of forming birefringent phases, were assessed based on the results of ¹H and (13)C NMR, differential scanning calorimetry (DSC), and polarizing microscopy studies. Whenever possible, the resulting values of Krafft temperature (TK), critical micelle concentration (CMC), minimum surface tension above the CMC, chloride counter-ion binding to the micelle, and the standard enthalpy of micelle formation per mole of surfactant (ΔmicH°) were compared to those characterizing alkyltrimethylammonium chlorides or bromides with the same tail lengths. The value of TK ranged between 292 and 314 K and increased strongly with the increase in the chain length of the hydrophobic tail. Micellization was described as both entropy and enthalpy-driven. Based on the direct calorimetry measurements, the general trends in the CMC with the temperature, hydrophobic tail length, and NaCl addition were found to be similar to those of other types of cationic surfactants. The particularly exothermic character of micellization was ascribed to the hydrogen-binding capacity of the guanidinium head-group.
Asunto(s)
Guanidina/química , Micelas , Tensoactivos/química , Calorimetría , Cationes , Guanidina/análogos & derivados , Espectroscopía de Resonancia Magnética , Tensión Superficial , TemperaturaRESUMEN
The influence of the surface charge distribution on the interaction between nanosized particles in water is reported. The distribution of charges at the surface of initially neutral microemulsion droplets has been modulated by additions of various oligomeric cationic surfactants. The osmotic compressibility of the doped microemulsions was measured by light and small-angle neutrons scattering and reveals that the overall effective interaction induced by the ionic groups is repulsive. However, particular charge distributions decrease the osmotic compressibility much less than others. Independent measurements of the activity of the bromide counterions with specific electrodes evidence a significant decrease in the effective charge, which, however, cannot account for the osmotic compressibility in the framework of the primitive model. The q dependence of the structure factor reveals an attractive contribution over a short distance. Numerical studies assign this attractive contribution to the overlap of hydration shells that are extended as a result of the charge localization.
Asunto(s)
Coloides/química , Modelos Químicos , Nanoestructuras/química , Electricidad Estática , Alcanos/química , Éteres/química , Ósmosis , Tensoactivos/química , Agua/químicaRESUMEN
Using aminoglycoside antibiotics as drug models, it was shown that electrostatic complexes between hydrophilic drugs and oppositely charged double-hydrophilic block copolymers can form ordered mesophases. This phase behavior was evidenced by using poly(acrylic acid)-block-poly(ethylene oxide) block copolymers in the presence of silica precursors, and this allowed preparing drug-loaded mesoporous silica directly from the drug-polymer complexes. The novel synthetic strategy of the hybrid materials is highly efficient, avoiding waste and multistep processes; it also ensures optimal drug loading and provides pH-dependence of the drug release from the materials.
Asunto(s)
Portadores de Fármacos/química , Polímeros/química , Dióxido de Silicio/química , Polietilenglicoles/química , Solubilidad , Electricidad EstáticaRESUMEN
We have investigated the active motion of self-propelled colloids confined at the air-water interface and explored the possibility of enhancing the directional motion of self-propelled Janus colloids by slowing down their rotational diffusion. The two dimensional motion of micron-sized silica-platinum Janus colloids has been experimentally measured by particle tracking video-microscopy at increasing concentrations of the catalytic fuel, i.e. H2O2. Compared to the motion in the bulk, a dramatic enhancement of both the persistence length of trajectories and the speed has been observed. The interplay of colloid self-propulsion, due to an asymmetric catalytic reaction occurring on the colloid, surface properties and interfacial frictions controls the enhancement of the directional movement. The slowing down of the rotational diffusion at the interface, also measured experimentally, plays a pivotal role in the control and enhancement of active motion.
RESUMEN
Aggregates formed in an aqueous medium by three ionic liquids CnMImIbu made up of 1-alkyl-3-methyl-imidazolium cation (n = 4, 6, 8) and ibuprofenate anion are investigated. Dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryo-TEM), (1)H nuclear magnetic resonance measurements, and atom-scale molecular dynamics simulations are used to shed light on the main interactions governing the formation of the aggregates and their composition. At high concentration, mixed micelles are formed with a composition that depends on the imidazolium alkyl chain length. For the shortest alkyl chain, micelles are mainly composed of ibuprofenate anions with some imidazolium cations intercalated between the anions. Upon increasing the alkyl chain length, the composition of the aggregates gets enriched in imidazolium cations and aggregates of stoichiometric composition are obtained. Attractive interactions between these aggregates led to the formation of larger aggregates. As suggested by molecular simulations, these larger aggregates might constitute the early stage of phase separation. Transitions from micelles to vesicles or ribbons are observed due to dilution effects and changes in the chemical composition of the aggregates. We also show that aggregation can be probed using simple microscopic quantities such as radial distribution functions and average solvation numbers.
Asunto(s)
Ibuprofeno/análogos & derivados , Líquidos Iónicos/química , Tensoactivos/química , Química Farmacéutica , Ibuprofeno/química , Micelas , Microscopía Electrónica de Transmisión , Simulación de Dinámica MolecularRESUMEN
Here multiple angle of incidence ellipsometry was successfully applied to in situ assess the contact angle and surface coverage of gold nanoparticles as small as 18 nm, coated with stimuli-responsive polymers, at water-oil and water-air interfaces in the presence of NaCl and NaOH, respectively. The interfacial adsorption of the nanoparticles was found to be very slow and took days to reach a fairly low surface coverage. For water-oil interfaces, in situ nanoparticle contact angles agree with the macroscopic equilibrium contact angles of planar gold surfaces with the same polymer coatings, whilst for water-air interfaces, significant differences have been observed.
RESUMEN
The complexation of siRNA (small interfering RNA) with cationic micelles was studied using time dependent synchrotron SAXS. Micelles were formed by two types of divalent cationic surfactants, i.e. Gemini bis(quaternary ammonium) bromide with variable spacer length (12-3-12, 12-6-12, 12-12-12) and a weak electrolyte surfactant (SH14) with triazine head. Immediately after mixing (t < 50 ms), new large aggregates appeared in solution and the scattering intensity at low q increased. Concomitantly, the presence of a quasi-Bragg peak at q â¼ 1.5 nm(-1) indicated core structuring within the complexes. We hypothesize that siRNA and micelles are alternately arranged into "sandwiches", forming domains with internal structural coherence. The process of complex reorganization followed a first-order kinetics and was completed in less than about 5 minutes, after which a steady state was reached. Aggregates containing Geminis were compact globular structures whose gyration radii Rg depended on the spacer length and were in the order of 7-27 nm. Complexes containing SH14 (Rg = 14-16 nm) were less ordered and possessed a looser internal arrangement. The obtained data, joint with previous structural investigation using Dynamic Light Scattering, Zeta Potential and Small Angle Neutron Scattering, are encouraging evidence for using these systems in biological trials. In fact we showed that transfection agents can be obtained by simply mixing a micelle solution of the cationic surfactant and a siRNA solution, both of which are easily prepared and stable.
Asunto(s)
Micelas , ARN Interferente Pequeño/química , Tensoactivos/química , Cationes/química , Cinética , Simulación de Dinámica Molecular , Tamaño de la Partícula , ARN Interferente Pequeño/metabolismo , Dispersión del Ángulo Pequeño , Difracción de Rayos XRESUMEN
We report theoretical predictions and measurements of the capillary force acting on a spherical colloid smaller than the capillary length that is placed on a curved fluid interface of arbitrary shape. By coupling direct imaging and interferometry, we are able to measure the in situ colloid contact angle and to correlate its position with respect to the interface curvature. Extremely tiny capillary forces down to femtonewtons can be measured with this method. Measurements agree well with a theory relating the capillary force to the gradient of Gaussian curvature and to the mean curvature of the interface prior to colloidal deposition. Numerical calculations corroborate these results.
Asunto(s)
Coloides/química , Modelos Químicos , Interferometría/métodos , Tensión SuperficialRESUMEN
Hybrid polyion complex (HPIC) micelles are nanoaggregates obtained by complexation of multivalent metal ions by double hydrophilic block copolymers (DHBC). Solutions of DHBC such as the poly(acrylic acid)-block-poly(acrylamide) (PAA-b-PAM) or poly(acrylic acid)-block-poly(2-hydroxyethylacrylate) (PAA-b-PHEA), constituted of an ionizable complexing block and a neutral stabilizing block, were mixed with solutions of metal ions, which are either monoatomic ions or metal polycations, such as Al(3+), La(3+), or Al(13)(7+). The physicochemical properties of the HPIC micelles were investigated by small angle neutron scattering (SANS) and dynamic light scattering (DLS) as a function of the polymer block lengths and the nature of the cation. Mixtures of metal cations and asymmetric block copolymers with a complexing block smaller than the stabilizing block lead to the formation of stable colloidal HPIC micelles. The hydrodynamic radius of the HPIC micelles varies with the polymer molecular weight as M(0.6). In addition, the variation of R(h) of the HPIC micelle is stronger when the complexing block length is increased than when the neutral block length is increased. R(h) is highly sensitive to the polymer asymmetry degree (block weight ratio), and this is even more true when the polymer asymmetry degree goes down to values close to 3. SANS experiments reveal that HPIC micelles exhibit a well-defined core-corona nanostructure; the core is formed by the insoluble dense poly(acrylate)/metal cation complex, and the diffuse corona is constituted of swollen neutral polymer chains. The scattering curves were modeled by an analytical function of the form factor; the fitting parameters of the Pedersen's model provide information on the core size, the corona thickness, and the aggregation number of the micelles. For a given metal ion, the micelle core radius increases as the PAA block length. The radius of gyration of the micelle is very close to the value of the core radius, while it varies very weakly with the neutral block length. Nevertheless, the radius of gyration of the micelle is highly dependent on the asymmetry degree of the polymer: if the neutral block length increases in a large extent, the micelle radius of gyration decreases due to a decrease of the micelle aggregation number. The variation of the R(g)/R(h) ratio as a function of the polymer block lengths confirms the nanostructure associating a dense spherical core and a diffuse corona. Finally, the high stability of HPIC micelles with increasing concentration is the result of the nature of the coordination complex bonds in the micelle core.
RESUMEN
Interfacial tension, electrical conductivity, NMR self-diffusion and DLS experiments have been used to investigate the self-aggregation in water of ionic liquids associating an ibuprofenate anion and 1-alkyl-3-methylimidazolium [C(n)MIm](+) (n = 4, 6, 8) cations. Despite the short alkyl chain on imidazolium cations (n ≤ 8), these ionic liquids exhibit particularly low Critical Aggregation Concentrations (CAC), significantly lower than their parent 1-alkyl-3-methylimidazolium chloride salts. This behaviour is attributed to the formation of catanionic pairs between ibuprofenate and imidazolium.
Asunto(s)
Benzoatos/química , Ibuprofeno/análogos & derivados , Imidazoles/química , Líquidos Iónicos/química , Tensoactivos/química , Aniones/química , Cationes/química , Ibuprofeno/química , Propiedades de SuperficieRESUMEN
The successive transitions of morphology in aqueous solutions of interacting micelles are directly evidenced by the position q* of the correlation peak of the small angle neutron scattering profiles. As the volume fraction Phi increases, q* successively fits to the dilution laws expected for spheres and cylinders, and eventually gets close to the one expected for sheets when the micelles get branched. Data in between the swelling laws are quantitatively analyzed in terms of aggregation number and junction density. Varying the temperature in the dilute regime yields the end-cap energy which varies with molecular structure and scales as Phi(-1/2). In the semidilute regime, the junction density scales as nu(j) approximately Phi(1.8), close but slightly faster than theoretically expected. The boosting effect of intermicellar repulsion on growth and branching is pointed out by the present results which directly show that both condensation processes keep the micelles further apart.
RESUMEN
Ordered mesoporous silica materials were prepared under different pH conditions by using a silicon alkoxide as a silica source and polyion complex (PIC) micelles as the structure-directing agents. PIC micelles were formed by complexation between a weak polyacid-containing double-hydrophilic block copolymer, poly(ethylene oxide)-b-poly(acrylic acid) (PEO-b-PAA), and a weak polybase, oligochitosan-type polyamine. As both the micellization process and the rate of silica condensation are highly dependent on pH, the properties of silica mesostructures can be modulated by changing the pH of the reaction medium. Varying the materials synthesis pH from 4.5 to 7.9 led to 2D-hexagonal, wormlike or lamellar mesostructures, with a varying degree of order. The chemical composition of the as-synthesized hybrid organic/inorganic materials was also found to vary with pH. The structure variations were discussed based on the extent of electrostatic complexing bonds between acrylate and amino functions and on the silica condensation rate as a function of pH.