Quantitative analysis of solid dosage forms of Atenolol by Raman spectroscopy.

OBJECTIVE: To develop a Raman spectroscopy-based analytical model for quantification of solid dosage forms of active pharmaceutical ingredient (API) of Atenolol.Significance: For the quantitative analysis of pharmaceutical drugs, Raman Spectroscopy is a reliable and fast detection method. As part of this study, Raman Spectroscopy is explored for the quantitative analysis of different concentrations of Atenolol. METHODS: Various solid-dosage forms of Atenolol were prepared by mixing API with excipients to form different solid-dosage formulations of Atenolol. Multivariate data analysis techniques, such as Principal Component Analysis (PCA) and Partial least square regression (PLSR) were used for the qualitative and quantitative analysis, respectively. RESULTS: As the concentration of the drug increased in formulation, the peak intensities of the distinctive Raman spectral characteristics associated with the API (Atenolol) gradually increased. Raman spectral data sets were classified using PCA due to their distinctive spectral characteristics. Additionally, a prediction model was built using PLSR analysis to assess the quantitative relationship between various API (Atenolol) concentrations and spectral features. With a goodness of fit value of 0.99, the root mean square errors of calibration (RMSEC) and prediction (RMSEP) were determined to be 1.0036 and 2.83 mg, respectively. The API content in the blind/unknown Atenolol formulation was determined as well using the PLSR model. CONCLUSIONS: Based on these results, Raman spectroscopy may be used to quickly and accurately analyze pharmaceutical samples and for their quantitative determination.

Quantitative analysis of cephalexin in solid dosage form by Raman spectroscopy and chemometric tools.

OBJECTIVE: To use Raman Spectroscopy for qualitative and quantitative evaluation of pharmaceutical formulations of active pharmaceutical ingredient (API) of Cephalexin. SIGNIFICANCE: Raman Spectroscopy is a noninvasive, nondestructive, reliable and rapid detection technique used for various pharmaceutical drugs quantification. The present study explores the potential of Raman Spectroscopy for quantitative analysis of pharmaceutical drugs. METHOD: For qualitative and quantitative analysis of Cephalexin API, various standard samples containing less and more concentration of API than commercial tablet was prepared. To study spectral differences, the mean plot of all the samples was prepared. For qualitative analysis, Principal Component Analysis (PCA) and for quantitative analysis Partial Least Square Regression analysis (PLSR) was used. Both of these are Multivariate data analysis techniques and give reliable results as published in previous literature. RESULTS: PCA model distinguished all the Raman Spectral data related to the various Cephalexin solid dosage formulations whereas the PLSR model was used to calculate the concentration of different unknown formulations. For the PLSR model, RMSEC and RMSEP were determined to be 3.3953 and 3.8972, respectively. The prediction efficiency of this built PLSR model was found to be very good with a goodness of the model value (R2) of 0.98. The PLSR model also predicted the concentrations of Cephalexin formulations in the blind or unknown sample. CONCLUSION: These findings demonstrate that the Raman spectroscopy coupled to PLSR analysis could be regarded as a fast and effectively reliable tool for quantitative analysis of pharmaceutical drugs.

SERS characterization of biochemical changes associated with biodesulfurization of dibenzothiophene using Gordonia sp. HS126-4N.

In this study, Gordonia sp. HS126-4N was employed for dibenzothiophene (DBT) biodesulfurization, tracked over 9 days using SERS. During the initial lag phase, no significant spectral changes were observed, but after 48 h, elevated metabolic activity was evident. At 72 h, maximal bacterial population correlated with peak spectrum variance, followed by stable spectral patterns. Despite 2-hydroxybiphenyl (2-HBP) induced enzyme suppression, DBT biodesulfurization persisted. PCA and PLS-DA analysis of the SERS spectra revealed distinctive features linked to both bacteria and DBT, showcasing successful desulfurization and bacterial growth stimulation. PLS-DA achieved a specificity of 95.5 %, sensitivity of 94.3 %, and AUC of 74 %, indicating excellent classification of bacteria exposed to DBT. SERS effectively tracked DBT biodesulfurization and bacterial metabolic changes, offering insights into biodesulfurization mechanisms and bacterial development phases. This study highlights SERS' utility in biodesulfurization research, including its use in promising advancements in the field.

Surface-enhanced Raman spectroscopy of centrifuged blood serum samples of diabetic type II patients by using 50KDa filter devices.

Blood serum contains essential biochemical information which are used for early disease diagnosis. Blood serum consisted of higher molecular weight fractions (HMWF) and lower molecular weight fractions (LMWF). The disease biomarkers are lower molecular weight fraction proteins, and their contribution to disease diagnosis is suppressed due to higher molecular weight fraction proteins. To diagnose diabetes in early stages are difficult because of the presence of huge amount of these HMWF. In the current study, surface-enhanced Raman spectroscopy (SERS) are employed to diagnose diabetes after centrifugation of serum samples using Amicon ultra filter devices of 50 kDa which produced two fractions of whole blood serum of filtrate, low molecular weight fraction, and residue, high molecular weight fraction. Furthermore SERS is employed to study the LMW fractions of healthy and diseased samples. Some prominent SERS bands are observed at 725 cm-1, 842 cm-1, 1025 cm-1, 959 cm-1, and 1447 cm-1 due to small molecular weight proteins, and these biomarkers helped to diagnose the disease early stage. Moreover, chemometric techniques such as principal component analysis (PCA) and partial least square discriminant analysis (PLS-DA) are employed to check the potential of surface-enhanced Raman spectroscopy for the differentiation and classifications of the blood serum samples. SERS can be employed for the early diagnosis and screening of biochemical changes during type II diabetes.

Surface-enhanced Raman spectroscopy (SERS) for monitoring colistin-resistant and susceptible E. coli strains.

The emergence of drug-resistant bacteria is a precarious global health concern. In this study, surface-enhanced Raman spectroscopy (SERS) is used to characterize colistin-resistant and susceptible E. coli strains based on their distinguished SERS spectral features for the development of rapid and cost-effective detection and differentiation methods. For this purpose, three colistin-resistant and three colistin susceptible E. coli strains were analyzed by comparing their SERS spectral signatures. Moreover, multivariate data analysis techniques including Principal component analysis (PCA) and Partial Least Squares-Discriminant Analysis (PLS-DA) were used to examine the SERS spectral data of colistin-resistant and susceptible strains. PCA technique was employed for differentiating colistin susceptible and resistant E.coli strains due to alteration in biochemical compositions of the bacterial cell. PLS-DA is employed on SERS spectral data sets for discrimination of these resistant and susceptible E. coli strains with 100% specificity, 100% accuracy, 99.8% sensitivity, and 86% area under receiver operating characteristics (AUROC) curve.

Quantitative analysis of solid dosage forms of Losartan potassium by Raman spectroscopy.

Raman spectroscopy is an outstanding analytical tool increasingly utilized in the pharmaceutical field for the solid-state pharmaceutical drug analysis. In current study, the potential of Raman spectroscopy has been investigated for qualitative and quantitative analysis of solid dosage form of Losartan potassium. For this purpose, different solid dosage forms/concentrations of losartan potassium were prepared to compensate the commercially available pharmaceutical drug formulations and their Raman spectral data showed a gradual change in the specific Raman spectral features associated with the active pharmaceutical ingredient (API) of Losartan potassium as a function of change in the concentration. The Raman spectral data was analyzed by using Principal Component Analysis (PCA) for the classification of different spectral data sets of different concentrations of drug. Moreover, partial least square regression (PLSR) analysis was performed for monitoring the quantitative relation among different concentrations of Losartan potassium API and spectral data by constructing a predictive model. From the model, the value of root mean square error of calibration (RMSEC) and root mean square error of prediction (RMSEP) were observed to be 0.38 and 2.98 respectively and the value of goodness of fit was found to be 0.99. Furthermore, the quantity of unknown/blind sample of Losartan potassium formulation was also estimated by using PLSR model. From these results, it is demonstrated that Raman spectroscopy can be considered to be used for quick and reliable quantitative analysis of pharmaceutical solids.

Surface-enhanced Raman spectroscopy for the identification of tigecycline-resistant E. coli strains.

Tigecycline (TGC) is recognised as last resort of drugs against several antibiotic-resistant bacteria. Bacterial resistance to tigecycline due to presence of plasmid-mediated mobile TGC resistance genes (tet X3/X4) has broken another defense line. Therefore, rapid and reproducible detection of tigecycline-resistant E. coli (TREC) is required. The current study is designed for the identification and differentiation of TREC from tigecycline-sensitive E. coli (TSEC) by employing SERS by using Ag NPs as a SERS substrate. The SERS spectral fingerprints of E. coli strains associated directly or indirectly with the development of resistance against tigecycline have been distinguished by comparing SERS spectral data of TSEC strains with each TREC strain. Moreover, the statistical analysis including Principal Component Analysis (PCA), Hierarchical Cluster Analysis (HCA) and Partial Least Squares-Discriminant Analysis (PLS-DA) were employed to check the diagnostic potential of SERS for the differentiation among TREC and TSEC strains. The qualitative identification and differentiation between resistant and sensitive strains and among individual strains have been efficiently done by performing both PCA and HCA. The successful discrimination among TREC and TSEC at the strain level is performed by PLS-DA with 98% area under ROC curve, 100% sensitivity, 98.7% specificity and 100% accuracy.