RESUMEN
PURPOSE: The purpose of this study was to quantify differences in mechanical stability of a wedge-shaped distalization tibial tubercle osteotomy (TTO) with a standard technique, versus a modified technique with use of a proximal bone block and distally angled screw trajectory. METHODS: Ten fresh-frozen cadaver lower extremity specimens (five matched pairs) were utilized. Within each specimen pair, one specimen was randomly assigned to undergo a standard distalization osteotomy fixed with two bicortical 4.5-mm screws oriented perpendicular to the long axis of the tibia, and the other to undergo a distalization osteotomy with modified fixation utilizing a proximal bone block and distally angled screw trajectory. Each specimen's patella and tibia were mounted on a servo-hydraulic load frame using custom fixtures (MTS Instron). The patellar tendon was dynamically loaded to 400 N at a rate of 200 N/second for 500 cycles. Following the cyclic loading, loading to failure was done at 25 mm/min. RESULTS: The modified distalization TTO technique demonstrated significantly higher average load to failure compared to the standard distalization TTO technique (1339 N vs. 844.1 N, p < 0.001). Average maximum tibial tubercle displacement during cyclic loading was significantly smaller in the modified TTO technique group compared to the standard TTO technique (1.1 mm vs. 4.7 mm, p < 0.001). CONCLUSION: This study demonstrates that distalization TTO utilizing a modified technique with a proximal bone block and distally aimed screws is biomechanically superior to standard distalization TTO without proximal bone block and screw trajectory perpendicular to the long axis of the tibia. This increased stability may aid in reducing the reported higher complication rates (including loss of fixation, delayed union and nonunion) following distalization TTO, although future clinical outcome studies are warranted.
Asunto(s)
Rótula , Tibia , Humanos , Tibia/cirugía , Rótula/cirugía , Osteotomía/métodos , Extremidad Inferior , Tornillos Óseos , Fenómenos BiomecánicosRESUMEN
BACKGROUND: Dynamic anterior shoulder stabilization (DAS) with Bankart repair is a recently described stabilization technique thought to be more robust than an isolated Bankart repair while avoiding many coracoid transfer-related complications and technical demands. DAS involves transfer of the long head biceps through a subscapularis split to the anterior glenoid to create a sling effect. We hypothesize that DAS with Bankart repair will restore anterior stability in a human-cadaveric model with subcritical (15%) glenoid bone loss. METHODS: Eight cadaveric shoulders were tested using an established shoulder simulator to record glenohumeral translations with an accuracy of ±0.2 mm. Shoulders were tested in 5 states-intact soft tissues, Bankart defect with 15% bone loss, isolated Bankart repair, DAS with Bankart repair, isolated DAS, and Latarjet. A 45 N anterior force was applied through the pectoralis major tendon, and translation of the humeral head was recorded and compared with repeated measures analysis of variance. RESULTS: The anterior translation in the intact (native) glenoid was 4.7 mm at neutral position and 4.6 mm at 45° external rotation. Anterior translation significantly increased after introducing a Bankart defect with 15% glenoid bone loss to 9.1 mm (neutral, P = .002) and 9.5 mm (45° external rotation, P < .001). All repair conditions showed a significant decrease in anterior translation relative to Bankart defect. DAS with Bankart repair decreased anterior translation compared with the Bankart defect: 2.7 mm (neutral, P < .001) and 2.1 mm (45° external rotation, P < .001). DAS with Bankart repair significantly decreased anterior translation compared with the isolated Bankart repair (2.7 mm vs. 4.7 mm, P = .023) and the isolated DAS (2.7 mm vs. 4.3 mm, P = .041) in neutral position. The Latarjet procedure resulted in the greatest reduction in anterior translation compared with the Bankart defect: 1.2 mm (neutral, P < .001) and 1.9 mm (45° external rotation, P < .001). CONCLUSIONS: DAS with Bankart repair is a viable alternative to restore anterior glenohumeral stability with a 15% glenoid defect at a greater degree than either DAS or Bankart repair alone. The Latarjet procedure was the most effective in reducing anterior translation but restrained the anterior translation significantly more than the native glenoid.
Asunto(s)
Enfermedades Óseas Metabólicas , Inestabilidad de la Articulación , Luxación del Hombro , Articulación del Hombro , Humanos , Fenómenos Biomecánicos , Cadáver , Inestabilidad de la Articulación/cirugía , Inestabilidad de la Articulación/etiología , Luxación del Hombro/cirugía , Luxación del Hombro/complicaciones , Articulación del Hombro/cirugíaRESUMEN
BACKGROUND: Success of superior capsule reconstruction (SCR) using both fascia lata (FL) and human acellular dermal (ACD) allografts have been reported. One possible explanation for a discrepancy in outcomes may be attributed to graft thickness. SCR with commercially available 3-mm-thick ACD allograft is not biomechanically equivalent to FL. Our hypothesis was that SCR with a single 6-mm-thick ACD allograft will restore the subacromial space distance (SubDist) and peak subacromial contact pressures (PSCPs) to intact shoulder and will be comparable to SCR with an 8-mm FL allograft. METHODS: Eight cadaveric shoulders were tested in 4 conditions: intact, irreparable supraspinatus tear (SST), SCR FL allograft (8-mm-thick), and SCR single ACD allograft (6-mm-thick). SubDist and PSCP were measured at 0°, 30°, and 60° of glenohumeral abduction in the scapular plane. Parameters were compared using a repeated measures analysis of variance with Tukey post hoc test, and graft dimensions were compared using a Student t test. RESULTS: SST had decreased SubDist (P < .05) and increased PSCP (P < .05) compared with the intact state. At all angles, the SCR ACD allograft demonstrated increased SubDist compared with the tear condition (P < .001), with no difference between grafts. Furthermore, there was decreased PSCP after both ACD and FL SCR compared with the intact condition, with no difference between grafts at 0° (P = .006, P = .028) and 60° abduction (P = .026, P = .013). Both ACD and FL grafts elongated during testing. CONCLUSIONS: Our results suggest SCR with a single 6-mm-thick ACD allograft is noninferior to FL regarding SubDist and PSCP while completely restoring the superior stability of the glenohumeral joint compared with the intact state.
Asunto(s)
Lesiones del Manguito de los Rotadores , Articulación del Hombro , Aloinjertos , Fenómenos Biomecánicos , Cadáver , Fascia Lata/trasplante , Humanos , Rango del Movimiento Articular , Manguito de los Rotadores/cirugía , Lesiones del Manguito de los Rotadores/cirugía , Articulación del Hombro/cirugíaRESUMEN
BACKGROUND: The purpose was to analyze the influence of deltoid lengthening due to different implant designs and anatomic variations of the acromion and scapular spine (SS) in the parasagittal plane on strain patterns after reverse shoulder arthroplasty (RSA). METHODS: Ten cadaveric shoulders with strain rosettes placed on the surface of the acromial body (Levy II) and SS (Levy III) were tested using a shoulder simulator. RSA using humeral onlay (+3, +5, +8, +10, +13 mm) and glenosphere lateralization (0, +6 mm) was performed. Arm lengthening and magnitude of strain on acromion/SS were measured. The length of deltoid was assessed using validated computer modeling. Anatomic variance of the SS angle and position of acromion in relation to the scapular plane was examined. For comparison of strain as a function of deltoid lengthening, 25 mm was used as a threshold value for comparison based on previous literature demonstrating a decrease in Constant score and active anterior elevation in patients with arm lengthening >25 mm. RESULTS: At maximal deltoid lengthening (30.8 mm), average strains were 1112 µÎµ (acromion) and 1165 µÎµ (SS) (P < .01). There was an 82.6% increase in acromial strain at maximum lengthening compared with 25 mm (P = .02) and a strain increase of 79 µÎµ/mm deltoid lengthening above a threshold of 25 mm. The strain results delineated 2 anatomic groups: 5 of 10 specimens (group A) showed higher strain on SS (1445 µÎµ) vs. acromion (862 µÎµ, P = .02). Group A had a more posteriorly oriented acromion, whereas group B was anteriorly oriented (P < .001). CONCLUSION: Deltoid lengthening above 25 mm produced large strains on the acromion/SS. Anatomic variation may indicate that as the acromion is more posteriorly oriented, the SS takes more strain from the deltoid vs. the acromion. Our study's data may help surgeons identify a high-risk population for increased strain patterns after RSA.
Asunto(s)
Acromion/anatomía & histología , Artroplastía de Reemplazo de Hombro , Músculo Deltoides/fisiopatología , Diseño de Prótesis , Articulación del Hombro/fisiopatología , Acromion/fisiopatología , Acromion/cirugía , Adulto , Variación Anatómica , Fenómenos Biomecánicos , Cadáver , Simulación por Computador , Femenino , Humanos , Masculino , Persona de Mediana Edad , Articulación del Hombro/cirugía , Prótesis de Hombro , Estrés MecánicoRESUMEN
The Microsoft Kinect is becoming a widely used tool for inexpensive, portable measurement of human motion, with the potential to support clinical assessments of performance and function. In this study, the relative osteokinematic Cardan joint angles of the hip and knee were calculated using the Kinect 2.0 skeletal tracker. The pelvis segments of the default skeletal model were reoriented and 3-dimensional joint angles were compared with a marker-based system during a drop vertical jump and a hip abduction motion. Good agreement between the Kinect and marker-based system were found for knee (correlation coefficient = 0.96, cycle RMS error = 11°, peak flexion difference = 3°) and hip (correlation coefficient = 0.97, cycle RMS = 12°, peak flexion difference = 12°) flexion during the landing phase of the drop vertical jump and for hip abduction/adduction (correlation coefficient = 0.99, cycle RMS error = 7°, peak flexion difference = 8°) during isolated hip motion. Nonsagittal hip and knee angles did not correlate well for the drop vertical jump. When limited to activities in the optimal capture volume and with simple modifications to the skeletal model, the Kinect 2.0 skeletal tracker can provide limited 3-dimensional kinematic information of the lower limbs that may be useful for functional movement assessment.
Asunto(s)
Marcadores Fiduciales , Articulación de la Cadera/fisiología , Interpretación de Imagen Asistida por Computador/instrumentación , Imagenología Tridimensional/instrumentación , Movimiento/fisiología , Rango del Movimiento Articular/fisiología , Diseño de Equipo , Análisis de Falla de Equipo , Femenino , Humanos , Interpretación de Imagen Asistida por Computador/métodos , Imagenología Tridimensional/métodos , Masculino , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Adulto JovenRESUMEN
BACKGROUND: Medial patellofemoral ligament (MPFL) reconstruction is considered by many to be the gold standard to treat lateral patellar instability; however, some investigators have reported good clinical results after isolated medial quadriceps tendon-femoral ligament (MQTFL) reconstruction or a combined MPFL/MQTFL reconstruction. A handful of studies have preliminarily investigated the biomechanical consequences of these various medial patellar stabilizing procedures. Despite this, no existing study has included multiple medial patellofemoral complex (MPFC) reconstructions and assessment of lateral patellar translation at distinct flexion angles. HYPOTHESIS: Combined MPFL/MQTFL reconstruction would restore patellofemoral contact areas, forces, and kinematics closest to the native state compared with isolated reconstruction of the MPFL or MQTFL alone. STUDY DESIGN: Controlled laboratory study. METHODS: Ten adult cadaveric knee specimens were prepared and analyzed under 5 different conditions: (1) intact state, (2) transected MPFC, (3) isolated MPFL reconstruction, (4) isolated MQTFL reconstruction, and (5) combined MPFL/MQTFL reconstruction. Patellar tilt, lateral patellar translation, patellofemoral contact forces, and patellofemoral contact areas were measured in each condition from 0° to 80° through simulated knee flexion using a custom servohydraulic load frame with pressure sensor technology and a motion capture system for kinematic data acquisition. RESULTS: The isolated MPFL, isolated MQTFL, and combined MPFL/MQTFL reconstruction conditions produced significantly less lateral patellar tilt compared with the transected MPFC state (P < .05). No statistically significant differences were found when each reconstruction technique was compared with the intact state in patellar tilt, lateral patellar translation, contact forces, and contact areas. CONCLUSION: All 3 reconstruction techniques (isolated MPFL reconstruction, isolated MQTFL reconstruction, and combined MPFL/MQTFL reconstruction) restored native knee kinematics, contact forces, and contact areas without overconstraint. CLINICAL RELEVANCE: Isolated MPFL reconstruction, isolated MQTFL reconstruction, and combined MPFL/MQTFL reconstruction all restore patellofemoral stability comparable with the intact MPFC state without the overconstraint that could be concerning for increasing risk of patellofemoral arthritis.
Asunto(s)
Articulación Patelofemoral , Humanos , Fenómenos Biomecánicos , Articulación Patelofemoral/cirugía , Masculino , Femenino , Persona de Mediana Edad , Cadáver , Adulto , Inestabilidad de la Articulación/cirugía , Inestabilidad de la Articulación/fisiopatología , Anciano , Presión , Procedimientos de Cirugía Plástica/métodos , Ligamentos Articulares/cirugíaRESUMEN
OBJECTIVES: A tibial tubercle-trochlear groove (TT-TG) distance of 20 millimeters (mm) is typically used when determining whether tibial tubercle medialization is performed for the surgical treatment of patellar instability. Without knowledge of how the variability of an individual's TT-TG distance is influenced by through-the-knee femorotibial rotation, the use of a specific TT-TG distance during preoperative planning for patellar instability may lead to incorrect decisions on the use of tibial tubercle medialization. We hypothesized that knee joint internal/external (IE) rotation is related to the TT-TG distance. METHODS: Eight independent human cadaveric knee specimens (age: 32 â± â6 years; 4 males, 4 females) were utilized. A robotic manipulator (ZX165U, Kawasaki Robotics, Wixom, MI, USA) instrumented with a universal force/moment sensor was used to determine knee joint IE rotation under applied moments of ±5 newton-meters (Nm) at full extension. Two independent reviewers selected the trochlear groove and tibial tuberosity points on computerized tomography (CT) images of each specimen to define TT-TG. To determine the influence of knee joint IE rotation on TT-TG distance, three-dimensional (3D) models generated from CT scans were registered to tibiofemoral kinematics. Linear regression was performed to determine the relationship between knee joint IE rotation and TT-TG distance. The regression coefficient, standard error of measurement (α â= â0.05), and coefficient of determination (r2) were reported. RESULTS: At 0° of rotation, the mean TT-TG distance was 14.2 â± â5.0 âmm. Knee joint IE rotation averaged 23.0 â± â4.2°. For every degree of knee joint IE rotation, TT-TG distance changed by 0.52 âmm. CONCLUSION: TT-TG distance was linearly dependent on knee joint IE rotation, changing by 0.52 âmm for every degree of knee joint IE rotation. Thus, an offset of IE rotation of 10° would lead to a change in TT-TG distance of 5.2 âmm, enough to alter the surgical decision-making for/or against tibial tubercle medialization. LEVEL OF EVIDENCE: IV: This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.
Asunto(s)
Cadáver , Fémur , Articulación de la Rodilla , Tibia , Humanos , Tibia/cirugía , Femenino , Masculino , Rotación , Fémur/cirugía , Articulación de la Rodilla/cirugía , Adulto , Rango del Movimiento Articular , Fenómenos Biomecánicos , Tomografía Computarizada por Rayos X/métodos , Inestabilidad de la Articulación/cirugía , Rótula/cirugíaRESUMEN
Background: As the use of all-suture anchors continues to increase, limited biomechanical data on the use of these anchors in various configurations for tenodesis of the long head biceps tendon (LHBT) exists. The aim of this study was to compare the biomechanical properties of a 2-anchor luggage tag suprapectoral biceps tenodesis (Sup-BT) vs. a single-anchor whipstitch subpectoral biceps tenodesis (Sub-BT) using all-suture anchors. The hypothesis was that the Sub-BT will have a higher ultimate load to failure and less creep relative to the Sup-BT construct. Methods: Eighteen fresh frozen cadaveric humeri were used. The specimens were randomly divided into 2 groups of 9; i) The Sup-BT were performed with 2 1.8 mm knotless all-suture anchors using a luggage-tag fixation configuration, ii) The Sub-BT were performed using a single 1.9 mm all-suture anchor and a whipstitch suture configuration with a tied knot. The humeri were tested on a hydraulic MTS machine where the specimens were preloaded at 5 N for 2 minutes and then cyclically loaded from 5 to 50 N for 1000 cycles at 1 Hz while maximum displacement was recorded with a motion system and markers attached to the bone and bicep tendon. The tendon was then tensioned at a rate of 1 mm/s to obtain the ultimate load to failure. CT scans of the specimens were used to calculate the bone mineral density at the site of the anchor/bone interface and video recordings were captured during load to failure to document all modes of failure. Results: There was no significant difference in the average load to failure of the Sup-BT and Sub-BT groups (197 N ± 45 N (SD), 164 N ± 68 N (SD) respectively; P = .122) or creep under fatigue between the Sup-BT vs. Sub-BT specimens (3.1 mm, SD = 1.5 vs. 2.2 mm, SD = 0.9; P = .162). The bone mineral density was statistically different between the 2 groups (P < .001); however, there were no observed failures at the anchor/bone interface and no correlation between failure load and bone mineral density. Conclusion: The ultimate load to failure and creep between a Sup-BT with 2 knotless all-suture anchors using a luggage tag suture configuration was equivalent to a Sub-BT with 1 all-suture anchor using a whipstitched suture configuration and a tied knot. Surgeons can perform either technique confidently knowing that they are biomechanically equivalent in a cadaver model at time zero, and they offer similar strength to other fixation methods cited in the literature.
RESUMEN
BACKGROUND: Patellofemoral (PF) dysplasia is common in patients with recurrent patellar instability. Tibial tubercle osteotomy (TTO) is performed with goals of correcting patellar maltracking and redistributing contact forces across the PF joint. The biomechanical effects of TTO in the setting of PF dysplasia have not been quantified. PURPOSE/HYPOTHESIS: To quantify patellar contact mechanics and kinematics after TTO in the setting of PF dysplasia. We hypothesized that a simulated anteromedialization (AMZ) TTO would improve PF contact mechanics as compared with a pure medialization TTO. STUDY DESIGN: Controlled laboratory study. METHODS: PF dysplasia with Dejour type D classification was simulated in 7 cadaveric knees by replacing the native patellar and trochlear surfaces with synthetic polymeric patellar and trochlear implants. On each specimen, a flat TTO was fixed in 3 distinct positions simulating a pathologic lateralized tubercle (pathologic condition), a medialized tubercle (Elmslie Trillat), and an AMZ tubercle. The sum of forces acting on the medial and lateral patellar facet and patellar kinematics was computed for each knee for each condition from 0° to 70° of flexion at 10° increments. RESULTS: Relative to the pathologic condition, AMZ TTO decreased contact forces across the lateral facet (20°-50° and 70° of flexion). Relative to the pathologic condition, Elmslie Trillat TTO had no effect on contact forces on either compartment. Relative to the Elmslie Trillat TTO, the AMZ TTO had significantly decreased contact forces across the medial facet (at 40°, 60°, and 70° of flexion). No significant differences in joint kinematics occurred across any groups. CONCLUSION: Of all groups studied, AMZ TTO resulted in significantly decreased patellar contact forces in simulated dysplastic PF joints. AMZ may be considered in certain patients with PF dysplasia to avoid medial compartment PF chondral overload. CLINICAL RELEVANCE: PF dysplasia is common in patients with recurrent patellar instability who warrant surgical intervention to prevent subsequent recurrence. Numerous interventions to treat this condition, including various TTOs, have been proposed without a clear consensus. This cadaveric biomechanical study demonstrates that AMZ TTO resulted in more favorable PF contact mechanics than Elmslie Trillat TTO in a model representing PF dysplasia. AMZ TTO may be considered for patients in the setting of recurrent instability with PF dysplasia to avoid cartilage overload on the medial compartment of the PF joint.
Asunto(s)
Inestabilidad de la Articulación , Luxación de la Rótula , Articulación Patelofemoral , Humanos , Articulación Patelofemoral/cirugía , Inestabilidad de la Articulación/cirugía , Articulación de la Rodilla/cirugía , Tibia/cirugía , Osteotomía/métodos , Cadáver , Luxación de la Rótula/cirugíaRESUMEN
BACKGROUND: The amount of glenoid width that must be restored with a Latarjet procedure in order to reestablish glenohumeral stability has not been determined. PURPOSE/HYPOTHESIS: The purpose of this article was to determine the percentage of glenoid width restoration necessary for glenohumeral stability after Latarjet by measuring anterior humeral head translation and force distribution on the coracoid graft. The hypothesis was that at least 100% of glenoid width restoration with Latarjet would be required to maintain glenohumeral stability. STUDY DESIGN: Controlled laboratory study. METHODS: Nine cadaveric shoulders were prepared and mounted on an established shoulder simulator. A lesser tuberosity osteotomy (LTO) was performed to allow accurate removal of glenoid bone. Coracoid osteotomy was performed, and the coracoid graft was sized to a depth of 10 mm. Glenoid bone was sequentially removed, and Latarjet was performed using 2 screws to reestablish 110%, 100%, 90%, and 80% of native glenoid width. The graft was passed through a subscapularis muscle split, and the LTO was repaired. A motion tracking system recorded glenohumeral translations, and force distribution was recorded using a TekScan pressure sensor secured to the glenoid face and coracoid graft. Testing conditions included native; LTO; Bankart tear; and 110%, 100%, 90%, and 80% of glenoid width restoration with Latarjet. Glenohumeral translations were recorded while applying an anteroinferior load of 44 N at 90° of humerothoracic abduction and 0° or 45° of glenohumeral external rotation. Force distribution was recorded without an anteroinferior load. RESULTS: Anterior humeral head translation progressively increased as the proportion of glenoid width restored decreased. A marked increase in anterior humeral head translation was found with 90% versus 100% glenoid width restoration (10.8 ± 3.0 vs 4.1 ± 2.6 mm, respectively; P < .001). Greater glenoid bone loss also led to increased force on the coracoid graft relative to the native glenoid bone after Latarjet. A pronounced increase in force on the coracoid graft was seen with 90% versus 100% glenoid width restoration (P < .001). CONCLUSION: Anterior humeral head translation and force distribution on the coracoid graft dramatically increased when <100% of the native glenoid width was restored with a Latarjet procedure. CLINICAL RELEVANCE: If a Latarjet is unable to fully restore the native glenoid width, surgeons should consider alternative graft sources to minimize the risk of recurrent instability or coracoid overload.
Asunto(s)
Inestabilidad de la Articulación , Luxación del Hombro , Articulación del Hombro , Humanos , Articulación del Hombro/cirugía , Articulación del Hombro/fisiología , Fenómenos Biomecánicos , Cadáver , Inestabilidad de la Articulación/cirugía , Escápula/cirugía , Escápula/fisiología , Luxación del Hombro/cirugíaRESUMEN
BACKGROUND: The distribution of contact forces across the dysplastic patellofemoral joint has not been adequately quantified because models cannot easily mimic the dysplasia of both the trochlea and the patella. Thus, the mechanical consequences of surgical treatments to correct dysplasia cannot be established. PURPOSE/HYPOTHESIS: The objective of this study was to quantify the contact mechanics and kinematics of normal, mild, and severely dysplastic patellofemoral joints using synthetic mimics of the articulating surfaces on cadavers. We tested the hypothesis that severely dysplastic joints would result in significantly increased patellofemoral contact forces and abnormal kinematics. STUDY DESIGN: Controlled laboratory study. METHOD: Patellofemoral dysplasia was simulated in 9 cadaveric knees by replacing the native patellar and trochlear surfaces with synthetic patellar and trochlear implants. For each knee, 3 synthetic surface geometries (normal, showing no signs of dysplasia; mild, exemplifying Dejour type A; and severe, exemplifying Dejour type B) were randomized for implantation and testing. Patellar kinematics and the sum of forces acting on the medial and lateral patellar facets were computed for each knee and for each condition at 10° increments from 0° to 70° of flexion. RESULTS: A pronounced lateral shift in the weighted center of contact of the lateral facet occurred for severely dysplastic knees from 20° to 70° of flexion. Compared with normal geometries, lateral patellar facet forces exhibited a significant increase only with mild dysplasia from 50° to 70° of flexion and with severe dysplasia at 70° of flexion. No measurable differences in medial patellar facet mechanics or joint kinematics occurred. CONCLUSION: Our hypothesis was rejected: Severely dysplastic joints did not result in significantly increased patellofemoral contact forces and abnormal kinematics in our cadaveric simulation. Rather, severe dysplasia resulted in a pronounced lateral shift in contact forces across the lateral patellar facet, while changes in kinematics and the magnitude of contact forces were not significant. CLINICAL RELEVANCE: Including dysplasia of both the patella and trochlea is required to fully capture the mechanics of this complex joint. The pronounced lateralization of contact force in severely dysplastic patellofemoral joints should be considered to avoid cartilage overload with surgical manipulation.
Asunto(s)
Articulación Patelofemoral , Cadáver , Humanos , Rótula , Presión , Impresión TridimensionalRESUMEN
BACKGROUND: Noncontact anterior cruciate ligament (ACL) injury in adolescent female athletes is an increasing problem. The knee-ankle separation ratio (KASR), calculated at initial contact (IC) and peak flexion (PF) during the drop vertical jump (DVJ), is a measure of dynamic knee valgus. The Microsoft Kinect V2 has shown promise as a reliable and valid marker-less motion capture device. HYPOTHESIS: The Kinect V2 will demonstrate good to excellent correlation between KASR results at IC and PF during the DVJ, as compared with a "gold standard" Vicon motion analysis system. STUDY DESIGN: Descriptive laboratory study. LEVEL OF EVIDENCE: Level 2. METHODS: Thirty-eight healthy volunteer subjects (20 male, 18 female) performed 5 DVJ trials, simultaneously measured by a Vicon MX-T40S system, 2 AMTI force platforms, and a Kinect V2 with customized software. A total of 190 jumps were completed. The KASR was calculated at IC and PF during the DVJ. The intraclass correlation coefficient (ICC) assessed the degree of KASR agreement between the Kinect and Vicon systems. RESULTS: The ICCs of the Kinect V2 and Vicon KASR at IC and PF were 0.84 and 0.95, respectively, showing excellent agreement between the 2 measures. The Kinect V2 successfully identified the KASR at PF and IC frames in 182 of 190 trials, demonstrating 95.8% reliability. CONCLUSION: The Kinect V2 demonstrated excellent ICC of the KASR at IC and PF during the DVJ when compared with the Vicon system. A customized Kinect V2 software program demonstrated good reliability in identifying the KASR at IC and PF during the DVJ. CLINICAL RELEVANCE: Reliable, valid, inexpensive, and efficient screening tools may improve the accessibility of motion analysis assessment of adolescent female athletes.