Cu(II) Coordination Polymers for the Selective Oxidation of Biomass-Derived Veratryl Alcohol in Green Solvents: A Sustainable Catalytic Approach.

Four air-stable one-dimensional copper(II) coordination polymers (CP1-CP4) with azide linkers were synthesized using tridentate NNS and NNN ligands. Single-crystal X-ray diffraction (XRD) analysis confirmed the molecular structures of CP1, CP3, and CP4. In the presence of TEMPO, all four coordination polymers demonstrated effective catalytic activity for the selective aerobic oxidation of veratryl alcohol, a biomass model compound, under base-free conditions. CP4 exhibited the best catalytic efficiency. Oxidations were conducted at ambient temperature (40 °C) utilizing air as a sustainable oxidant. Selective oxidation of veratryl alcohol to veratraldehyde was also conducted in the presence of a catalytic amount of base (5 mol %), and enhanced reactivity was observed. The green solvents, acetone, and water, were used to maximize sustainability. The optimized reaction conditions were applied to broaden the substrate scope of various lignin model alcohols and substituted benzylic alcohols with wide electronic variability. CP4 exhibited high recyclability, consistently providing quantitative yields even after ten consecutive runs. The catalytic protocol demonstrated sustainability and environmental compatibility, as evidenced by a low E-factor (4.29) and a high Eco-scale score (90). Based on experimental evidence and theoretical calculations, a plausible catalytic cycle was proposed. Finally, the sustainability credentials of the different optimized reaction protocols were evaluated using the CHEM21 green metrics toolkit.

Electrocatalytic Water Oxidation by Mononuclear Copper Complexes of Bis-amide Ligands with N4 Donor: Experimental and Theoretical Investigation.

The present work describes electrocatalytic water oxidation of three monomeric copper complexes [CuII(L1)] (1), [CuII(L2)(H2O)] (2), and [CuII(L3)] (3) with bis-amide tetradentate ligands: L1 = N,N'-(1,2-phenylene)dipicolinamide, L2 = N,N'-(4,5-dimethyl-1,2-phenylene)bis(pyrazine-2-carboxamide), L3 = N,N'-(1,2-phenylene)bis(pyrazine-2-carboxamide), for the production of molecular oxygen by the oxidation of water at pH 13.0. Ligands and all complexes have been synthesized and characterized by single crystal XRD, analytical, and spectroscopic techniques. X-ray crystallographic data show that the ligand coordinates to copper in a dianionic fashion through deprotonation of two -NH protons. Cyclic voltammetry study shows a reversible copper-centered redox couple with one ligand-based oxidation event. The electrocatalytic water oxidation occurs at an onset potential of 1.16 (overpotential, η ≈ 697 mV), 1.2 (η ≈ 737 mV), and 1.23 V (η ≈ 767 mV) for 1, 2, and 3 respectively. A systematic variation of the ligand scaffold has been found to display a profound effect on the rate of electrocatalytic oxygen evolution. The results of the theoretical (density functional theory) studies show the stepwise ligand-centered oxidation process and the formation of the O-O bond during water oxidation passes through the water nucleophilic attack for all the copper complexes. At pH = 13, the turnover frequencies have been experimentally obtained as 88, 1462, and 10 s-1 (peak current measurements) for complexes 1, 2, and 3, respectively. Production of oxygen gas during controlled potential electrolysis was detected by gas chromatography.

Iron- and base-catalyzed C(α)-alkylation and one-pot sequential alkylation-hydroxylation of oxindoles with secondary alcohols.

The utilization of economical and environmentally benign transition metals in crucial catalytic processes is pivotal for sustainable advancement in synthetic organic chemistry. Iron, as the most abundant transition metal in the Earth's crust, has gained significant attention for this purpose. A combination of FeCl2 (5 mol%) in the presence of phenanthroline (10 mol%) and NaOtBu (1.5 equivalent) proved effective for the C(α)-alkylation of oxindole, employing challenging secondary alcohol as a non-hazardous alkylating agent. The C(α)-alkylation of oxindole was optimized in green solvent or under neat conditions. The substrate scope encompasses a broad array of substituted oxindoles with various secondary alcohols. Further post-functionalization of the C(α)-alkylated oxindole products demonstrated the practical utility of this catalytic alkylation. One-pot C-H hydroxylation of alkylated oxindoles yielded 3-alkyl-3-hydroxy-2-oxindoles using air as the most sustainable oxidant. Low E-factors (3.61 to 4.19) and good Eco-scale scores (74 to 76) of these sustainable catalytic protocols for the alkylation and one-pot sequential alkylation-hydroxylation of oxindoles demonstrated minimum waste generation. Plausible catalytic paths are proposed on the basis of past reports and control experiments, which suggested that a borrowing hydrogen pathway is involved in this alkylation.

Hydrosilylation of Terminal Alkynes Catalyzed by an Air-Stable Manganese-NHC Complex.

In recent years, catalysis with base metal manganese has received a significant amount of interest. Catalysis with manganese complexes having N-heterocyclic carbenes (NHCs) is relatively underdeveloped in comparison to the extensively investigated manganese catalysts possessing pincer ligands (particularly phosphine-based ligands). Herein, we describe the synthesis of two imidazolium salts decorated with picolyl arms (L1 and L2) as NHC precursors. Facile coordination of L1 and L2 with MnBr(CO)5 in the presence of a base resulted in the formation manganese(I)-NHC complexes (1 and 2) as an air-stable solid in good isolated yield. Single-crystal X-ray analysis revealed the structure of the cationic complexes [Mn(CO)3(NHC)][PF6] with tridentate N,C,N binding of the NHC ligand in a facile fashion. Along with a few known manganese(I) complexes, these Mn(I)-NHC complexes 1 and 2 were tested for the hydrosilylation of terminal alkynes. Complex 1 was proved to be an effective catalyst for the hydrosilylation of terminal alkynes with good selectivity toward the less thermodynamically stable ß-(Z)-vinylsilanes. This method provided good regioselectivity (anti-Markovnikov addition) and stereoselectivity (ß-(Z)-product). Experimental evidence suggested that the present hydrosilylation pathway involved an organometallic mechanism with manganese(I)-silyl species as a possible reactive intermediate.

Solvent-Triggered Cis/Trans Isomerism in Cobalt Dioxolene Chemistry: Distinguishing Effects of Packing on Valence Tautomerism.

In this article, the synthesis and X-ray crystal structures of two cis/trans isomers of valence tautomeric (VT) cobalt dioxolene compounds are reported. The cis isomer (1) was isolated from the polar protic methanol solvent as a kinetic product, whereas the less polar nonprotic solvent acetone yielded the trans isomer (2). It should be noted that, although some coordination polymers involving cobalt bis(dioxolene) with the cis disposition are known for bridging ancillary ligands, such an arrangement is unprecedented for mononuclear compounds. A careful study of intermocular interactions revealed that the methanol solvent does not have much influence on the crystal growth in 1, whereas acetone forms strong halogen-bonding interactions that are crucial in the solid-state architecture of 2. This behavior can likely be used in crystal engineering to design new organic-inorganic hybrid materials. The energy difference between the two isomers was examined using DFT calculations, confirming that the trans form is in the thermodynamic state whereas the cis isomer is a kinetic product that can be converted into the trans isomer with time. Finally, both isomers exhibit solvent loss at elevated temperatures that is accompanied by a change in magnetic properties, associated with an irreversible valence tautomerism. Our results highlight the crucial role of the solvents for the isolation of cis/trans isomers in cobalt dioxolene chemistry, as well as the distinguishing effects of intermolecular forces and the solid-state packing on VT behavior.

Copper-catalyzed C(sp3)-H alkylation of fluorene with primary and secondary alcohols using a borrowing hydrogen method.

Despite the limited success of copper-catalyzed alkylations, (NNS)CuCl proved to be an effective catalyst for the sp3 C-H alkylation of fluorene with alcohols. Various primary alcohols and challenging secondary alcohols were successfully used. The practical applicability of the method was effectively tested with several post-functionalization reactions. This copper-catalyzed alkylation of fluorene involved a borrowing hydrogen mechanism.

Using eugenol scaffold to explore the explosive sensing properties of Cd(II)-based coordination polymers: experimental studies and real sample analysis.

Eugenol, the major constituent of clove oil, has been explored as an essential natural ingredient for ages owing to its versatile pharmacological properties. However, to date, the coordination chemistry of eugenol derivatives has not been much explored. In the present work, an eugenol-based Schiff base ligand (HL) was synthesized and structurally confirmed through ESI-MS, NMR, and FT-IR spectroscopy studies. Consequently, the N,O-donor chelating ligand HL was coordinated with Cd2+, in the presence of bridging pseudohalides (thiocyanate, SCN-, and dicyanamide, N(CN)2-) to synthesize two luminescent coordination polymers (CPs 1 and 2): [Cd2(L)2(X)2]n (where HL = 4-allyl-2-(((2-(benzylamino)ethyl) imino)methyl)-6-methoxyphenol and Xs are bridging pseudohalides, i.e., SCN- and N(CN)2-) on a Cd-eugenol scaffold. The CPs depicted structural diversity, bulk-phase purity, thermal stability, and the presence of interlayer supramolecular C-H⋯π interactions together with C-H⋯S (for CP 1) and C-H⋯N (for CP 2) interactions. The CPs further exemplified themselves as selective and sensitive 'turn-off' probes towards trinitrophenol (TNP) (quenching efficiency: 82.02% and 83.86% for 1 and 2) among a pool of hazardous nitroaromatic compounds (NACs). Accordingly, 1 and 2 exhibited an ultralow limit of detection (LOD) of 0.29 and 0.15 µM, with high quenching constants (KSV) of 5.91 × 104 and 17.60 × 104 M-1, respectively. In addition, TNP sensing events were evidenced to be recyclable and exhibited fast response (∼31 s, 1, and ∼40 s, 2), which increased its real-world viability. Vapor phase TNP sensing was also accomplished upon drop-casted CP films. Experimental investigations and theoretical DFT study confirmed the cooperative occurrence of RET-IFE-PET-collisional quenching and non-covalent π⋯π stacking as key factors involved in the TNP sensing performance. The competency of 1 and 2 in the detection of TNP from several complex environmental matrices (CEMs), viz. matchstick powder, river and sewage water, and soil specimens, was also established with good recovery (∼66-86% and ∼68-93% for 1 and 2, respectively) and high KSV values (3.90-11.39 × 104 and 6.17-18.79 × 104 M-1 for 1 and 2, respectively).

Unexpected structural preference with metallophilic Ag-Au contacts in silver(I)-N-heterocyclic carbene cluster; experimental and theoretical approach.

A novel synthetic donor-atom-selective approach has been adopted for the synthesis of a heterobimetallic cluster of a new NCN-pincer, 1,3-bis-(1-methyl-1H-benzo[d]imidazol-2-yl-methyl)-1H-imidazol-3-ium hexafluorophosphate (1·HPF6). The complex [Ag3(1)3][PF6]3 (2) has been prepared via the Ag2O route; which undergoes transmetallation to yield a cluster that seems to be the first example of the heterobimetallic trinuclear system [Au-Ag2(1)2Cl][PF6]2, 3. Finally, the trinuclear cluster geometries of 2 and 3 were confirmed via SCXRD studies. Interestingly, Au(I) binds preferentially with soft donor Ccarbene, which transmetallated from the cluster of 2. In both the cyclic trinuclear clusters, the M-M interactions were further inspected using gauge independent atomic orbital (GIAO) computations. Both 2 and 3 are luminescent and possess σ-aromaticity; the NICS values indicate that 3 is more aromatic than 2.

The effect of co-ligands on the performance of single-molecule magnet behaviours in a family of linear trinuclear Zn-Dy-Zn complexes with a compartmental Schiff base.

We present herein magneto-structural studies of three heterometallic Zn2Dy complexes: [Zn2Dy(L)2Cl2(H2O)](ClO4)·4H2O (1), [Zn2Dy(L)2Br2(H2O)](ClO4)·4H2O (2) and [Zn2Dy(L)2(OAc)I(H2O)]I3·4H2O (3), utilizing a new Schiff base ligand, N,N'-bis(3-methoxy-5-methylsalicylidene)-1,2-diaminocyclohexane (H2L). Complexes 1 and 2 exhibit remarkable magnetic relaxation behaviour with relatively high energy barriers in zero field (Ueff: 244 K for 1 and 211 K for 2) and notable hysteresis temperatures, despite the low local geometric symmetry around the central DyIII ions. The SMM performance of these complexes is further enhanced under an applied magnetic field, with Ueff increasing to 309 K for 1 and 269 K for 2, positioning them as elite members within the Zn-Dy SMM family. These findings emphasize the substantial influence of remote modulation on ZnII beyond the first coordination sphere of DyIII ions on their dynamic magnetic relaxation properties. Ab initio studies demonstrate that the relative orientation of the phenoxo-oxygen donor atoms around the DyIII ion is critical for determining the magnetic anisotropy and relaxation dynamics in these systems. Additionally, experimental and theoretical investigations reveal that the coordination of the bridging acetate towards the hard plane, combined with significant distortion from the ideal ZnO2Dy diamond core arrangement caused by the acetate ion, results in low magnetic anisotropy in complex 3, thereby leading to field-induced SMM behaviour. Overall, this study unveils the effects of co-ligands on the SMM performance in a series of linear trinuclear Zn-Dy-Zn complexes, which exhibit low local geometric symmetry around the DyIII centres.

Insight into ferromagnetic interactions in CuII-LnIII dimers with a compartmental ligand.

In the last two decades, efforts have been devoted to obtaining insight into the magnetic interactions between CuII and LnIII utilizing experimental and theoretical means. Experimentally, it has been observed that the exchange coupling (J) in CuII-LnIII systems is often found to be ferromagnetic for ≥4f7 metal ions. However, exchange interactions at sub-Kelvin temperatures between CuII and the anisotropic/isotropic LnIII ions are not often explored. In this report, we have synthesized a series of heterobimetallic [CuLn(HL)(µ-piv)(piv)2] complexes (LnIII = Gd (1), Tb (2), Dy (3) and Er (4)) from a new compartmental Schiff base ligand, N,N'-bis(3-methoxy-5-methylsalicylidene)-1,3-diamino-2-propanol (H3L). X-ray crystallographic analysis reveals that all four complexes are isostructural and isomorphous. Magnetic susceptibility measurements reveal a ferromagnetic coupling between the CuII ion and its respective LnIII ion for all the complexes, as often observed. Moreover, µ-SQUID studies, at sub-Kelvin temperatures, show S-shaped hysteresis loops indicating the presence of antiferromagnetic coupling in complexes 1-3. The antiferromagnetic interaction is explained by considering the shortest Cu⋯Cu distance in the crystal structure. The nearly closed loops for 1-3 highlight their fast relaxation characteristics, while the opened loops for 4 might arise from intermolecular ordering. CASSCF calculations allow the quantitative assessment of the interactions, which are further supported by BS-DFT calculations.

Chemical fixation of atmospheric CO2 in tricopper(II)-carbonato complexes with tetradentate N-donor ligands: reactive intermediates, probable mechanisms, and catalytic and magneto-structural studies.

In the present era, the fixation of atmospheric CO2 is of significant importance and plays a crucial role in maintaining the balance of carbon and energy flow within ecosystems. Generally, CO2 fixation is carried out by autotrophic organisms; however, the scientific community has paid substantial attention to execute this process in laboratory. In this report, we synthesized two carbonato-bridged trinuclear copper(II) complexes, [Cu3(L1)3(µ3-CO3)](ClO4)3 (1) and [Cu3(L2)3(µ3-CO3)](ClO4)3 (2) via atmospheric fixation of CO2 starting with Cu(ClO4)2·6H2O and easily accessible pyridine/pyrazine-based N4 donor Schiff base ligands L1 and L2, respectively. Under very similar reaction conditions, the ligand framework embedded with the phenolate moiety (HL3) fails to do so because of the reduction of the Lewis acidity of the metal center, inhibiting the formation of a reactive hydroxide bound copper(II) species, which is required for the fixation of atmospheric CO2. X-ray crystal structures display that carbonate-oxygen atoms bridge three copper(II) centers in µ3syn-anti disposition in 1 and 2, whereas [Cu(HL3)(ClO4)] (3) is a mononuclear complex. Interestingly, we also isolated an important intermediate of atmospheric CO2 fixation and structurally characterized it as an anti-anti µ2 carbonato-bridged dinuclear copper(II) complex, [Cu2(L2)2(µ2-CO3)](ClO4)2·MeOH (2-I), providing an in-depth understanding of CO2 fixation in these systems. Variable temperature magnetic susceptibility measurement suggests ferromagnetic interactions between the metal centers in both 1 and 2, and the results have been further supported by DFT calculations. The catalytic efficiency of our synthesized complexes 1-3 was checked by means of catechol oxidase and phenoxazinone synthase-like activities. While complexes 1 and 2 showed oxidase-like activity for aerobic oxidation of o-aminophenol and 3,5-di-tert-butylcatechol, complex 3 was found to be feebly active. ESI mass spectrometry revealed that the oxidation reaction proceeds through the formation of complex-substrate intermediations and was further substantiated by DFT calculations. Moreover, active catalysts 1 and 2 were effectively utilized for the base-free oxidation of benzylic alcohols in the presence of air as a green and sustainable oxidant and catalytic amount of TEMPO in acetonitrile. Various substituted benzylic alcohols smoothly converted to their corresponding aldehydes under very mild conditions and ambient temperature. The present catalytic protocol showcases its environmental sustainability by producing minimal waste.

Azide-Alkyne Cycloaddition Catalyzed by Copper(I) Coordination Polymers in PPM Levels Using Deep Eutectic Solvents as Reusable Reaction Media: A Waste-Minimized Sustainable Approach.

Two air-stable copper(I)-halide coordination polymers 1 and 2 with NNS and NNO ligand frameworks were synthesized and successfully utilized as efficient catalysts in an important organic reaction, namely, copper-catalyzed azide-alkyne cycloaddition, which is generally conducted in a mixture of water and organic solvents. The azide-alkyne "click" reaction was successfully conducted in pure water at r.t. under aerobic conditions. Other green solvents, including ethanol and glycerol, were also effectively used. Finally, deep eutectic solvents as green and sustainable reaction media were successfully utilized. In deep eutectic solvents, complete conversion with excellent isolated yield was achieved in a short period of time (1 h) with low catalyst loading (1 mol %) at r.t. Full conversion could also be achieved within 24 h with ppm-level (50 ppm) catalyst loading at 70 °C. Optimized reaction conditions were used for the syntheses of a large number of 1,4-disubstituted 1,2,3-triazoles with various functionalities. Triazole products were easily isolated by simple filtration. The reaction media, such as water and deep eutectic solvents, were recovered and recycled in three consecutive runs. The limited waste production is reflected in a very low E-factor (0.3-2.8). Finally, the CHEM21 green metrics toolkit was employed to evaluate the sustainability credentials of different optimized protocols in various green solvents such as water, ethanol, glycerol, and deep eutectic solvents.

Copper(i)-catalyzed click chemistry in deep eutectic solvent for the syntheses of ß-d-glucopyranosyltriazoles.

In the last two decades, click chemistry has progressed as a powerful tool in joining two different molecular units to generate fascinating structures with a widespread application in various branch of sciences. copper(i)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction, also known as click chemistry, has been extensively utilized as a versatile strategy for the rapid and selective formation of 1,4-disubstituted 1,2,3-triazoles. The successful use of CuAAC reaction for the preparation of biologically active triazole-attached carbohydrate-containing molecular architectures is an emerging area of glycoscience. In this regard, a well-defined copper(i)-iodide complex (1) with a tridentate NNO ligand (L1) was synthesized and effectively utilized as an active catalyst. Instead of using potentially hazardous reaction media such as DCM or toluene, the use of deep eutectic solvent (DES), an emerging class of green solvent, is advantageous for the syntheses of triazole-glycohybrids. The present work shows, for the first time, the successful use of DES as a reaction medium to click various glycosides and terminal alkynes in the presence of sodium azide. Various 1,4-disubstituted 1,2,3-glucopyranosyltriazoles were synthesized and the pure products were isolated by using a very simple work-up process (filtration). The reaction media was recovered and recycled in five consecutive runs. The presented catalytic protocol generated very minimum waste as reflected by a low E-factor (2.21-3.12). Finally, the optimized reaction conditions were evaluated with the CHEM21 green metrics toolkit.

Combined experimental and theoretical studies on a series of mononuclear LnIII single-molecule magnets: dramatic influence of remote substitution on the magnetic dynamics in Dy analogues.

A series of LnIII complexes of general formula [Ln(H2L1)2(NO3)2(H2O)](NO3) (1-5) [Ln = Dy (1), Tb (2) Ho (3), Er (4), and Yb (5)] and an analogous DyIII complex with ligand H2L2, [Dy(H2L2)2(NO3)3(H2O)](NO3) (6), where H2L1 and H2L2 stand for (E)-2-[(2-hydroxyphenyl)iminomethyl]-6-methoxy-4-methylphenol and (E)-2-[(2-hydroxy-5-methylphenyl)iminomethyl]-6-methoxy-4-methylphenol, respectively, have been synthesized and magneto-structurally characterized. All these complexes are isostructural and isomorphous, in which the zwitterionic form of the ligands predominantly coordinate the metal centers. The magnetic study revealed that complex 3 displays negligible SMM behaviour, while 1 and 6 are zero field SMMs, the performance of which can largely be improved in the presence of an applied dc field by lowering under barrier relaxation processes, and finally 2, 4, and 5 are field-induced SMMs. The most remarkable observation in the present study is the dramatically-enhanced SMM performance in 6 compared to 1, achieved by only a remote methyl substitution at the ligand framework to increase the intermolecular separation. Although SINGLE_ANISO ab initio calculations for 1 and 6 are very similar, the POLY_ANISO module revealed weak dipolar interactions in both the compounds but significant antiferromagnetic interaction in 1, thereby justifying the experimental fact. The present work discloses that even a small substitution such as a methyl group can adequately increase the intermolecular separation, leading to several-fold enhanced effective energy barrier.

Magneto-structural studies on a number of doubly end-on cyanate and azide bridged dinuclear nickel(ii) complexes with {N3O} donor Schiff base ligands.

Two new doubly µ 1,1-N3 bridged (1 and 3) and six new doubly µ 1,1-NCO bridged NiII complexes (2, 4-8) with six different N3O donor Schiff base ligands have been synthesized and magneto-structurally characterized. All these neutral complex molecules are isostructural and constitute edge sharing bioctahedral structures. Magnetic studies revealed that all these complexes exhibit ferromagnetic interaction through bridging pseudohalides with ferromagnetic coupling constant J being significantly higher for azide-bridged complexes than that of the cyanate analogues. This is consistent with the literature reported data and also the presence of polarizable π systems and two different N and O donor atoms in cyanate ion, rendering it a poor magnetic coupler in comparison to azide analogues. Although, the magneto-structurally characterized doubly µ 1,1-N3 bridged NiII complexes are abundant, only few such complexes with µ 1,1-bridging NCO- ions are reported in the literature. Remarkably, addition of these six new examples in this ever-growing series of doubly µ 1,1-NCO bridged systems gives us an opportunity to analyse the precise magneto-structural correlation in this system, showing a general trend in which the J value increases with an increase in bridging angles. Therefore, the high degree of structural and magnetic resemblances by inclusion of six new examples in this series is the major achievement of the present work. An elaborate DFT study was performed resulting in magneto-structural correlation showing that nature and value of the J-parameter is defined not only by Ni-Nb-Ni bond angles, but an important role is also played by the Ni1-Ni2-Nb-Xt dihedral angle (Nb and Xt are bridging N and terminal N or O atom of bridging ligands, respectively).