RESUMEN
The von Hippel-Lindau tumor suppressor pVHL is an E3 ligase that targets hypoxia-inducible factors (HIFs). Mutation of VHL results in HIF up-regulation and contributes to processes related to tumor progression such as invasion, metastasis, and angiogenesis. However, very little is known with regard to post-transcriptional regulation of pVHL. Here we show that WD repeat and SOCS box-containing protein 1 (WSB1) is a negative regulator of pVHL through WSB1's E3 ligase activity. Mechanistically, WSB1 promotes pVHL ubiquitination and proteasomal degradation, thereby stabilizing HIF under both normoxic and hypoxic conditions. As a consequence, WSB1 up-regulates the expression of HIF-1α's target genes and promotes cancer invasion and metastasis through its effect on pVHL. Consistent with this, WSB1 protein level negatively correlates with pVHL level and metastasis-free survival in clinical samples. This work reveals a new mechanism of pVHL's regulation by which cancer acquires invasiveness and metastatic tendency.
Asunto(s)
Regulación Neoplásica de la Expresión Génica , Metástasis de la Neoplasia , Proteínas/metabolismo , Proteína Supresora de Tumores del Síndrome de Von Hippel-Lindau/metabolismo , Hipoxia de la Célula , Línea Celular Tumoral , Movimiento Celular/genética , Células HEK293 , Células HT29 , Células HeLa , Humanos , Subunidad alfa del Factor 1 Inducible por Hipoxia/metabolismo , Péptidos y Proteínas de Señalización Intracelular , Mutación , Invasividad Neoplásica/genética , Neoplasias/genética , Neoplasias/fisiopatología , Complejo de la Endopetidasa Proteasomal/metabolismo , Estabilidad Proteica , Estructura Terciaria de Proteína , Proteínas/genética , Ubiquitinación , Proteína Supresora de Tumores del Síndrome de Von Hippel-Lindau/genéticaRESUMEN
Nanosized Ni, NiCo-Y2O3 powders were successfully synthesized at low temperature via a simple polymer solution route. As an organic carrier, polyvinyl alcohol (PVA) afforded an atom-scale homogeneous precursor gel, which in turn gave fully crystallized nanosized Ni, NiCo-Y2O3 powder upon calcination at a low temperature under an Ar-4% H2 atmosphere. The PVA content, calcination temperature, heating time, and reduction conditions affected the microstructure and crystallization behavior of the as-synthesized powders. The PVA content also influenced the synthesis behavior and microstructure of the final powder. The particle size increased with an increase in the calcination temperature and decrease in the PVA content. At a PVA-metal ion ratio of 4:1, the measured particle size was about 20 nm. The results of TEM mapping on the NiCo-Y (0.6 wt%) powders revealed a well-dispersed Y2O3 phase in the NiCo crystalline matrix.
RESUMEN
In this study, the effect of simple shearing on microstructure evolution and mechanical properties of 316L austenitic stainless steel were investigated. Two different shear strain routes were obtained by twisting cylindrical specimens in the forward and backward directions. The strain-induced martensite phase was effectively obtained by alteration of the routes. Formation of the martensite phase clearly resulted in significant hardening of the steel. Grain-size reduction and strain-induced martensitic transformation within the deformed structures of the strained specimens were characterized by scanning electron microscopy - electron back-scattered diffraction, X-ray diffraction, and the TEM-ASTAR (transmission electron microscopy - analytical scanning transmission atomic resolution, automatic crystal orientation/phase mapping for TEM) system. Significant numbers of twin networks were formed by alteration of the shear strain routes, and the martensite phases were nucleated at the twin interfaces.
RESUMEN
The nano-sized microstructures in Fe-Cr oxide dispersion strengthened steel for Gen IV in-core applications were studied using small angle neutron scattering. The oxide dispersion strengthened steel was manufactured through hot isostatic pressing with various chemical compositions and fabrication conditions. Small angle neutron scattering experiments were performed using a 40 m small angle neutron scattering instrument at HANARO. Nano sized microstructures, namely, yttrium oxides and Cr-oxides were quantitatively analyzed by small angle neutron scattering. The yttrium oxides and Cr-oxides were also observed by transmission electron microscopy. The microstructural analysis results from small angle neutron scattering were compared with those obtained by transmission electron microscopy. The effects of the chemical compositions and fabrication conditions on the microstructure were investigated in relation to the quantitative microstructural analysis results obtained by small angle neutron scattering. The volume fraction of Y-oxide increases after fabrication, and this result is considered to be due to the formation of non-stochiometric Y-Ti-oxides.
Asunto(s)
Cromo/química , Cristalización/métodos , Hierro/química , Nanoestructuras/química , Nanoestructuras/ultraestructura , Difracción de Neutrones , Acero/química , Sustancias Macromoleculares/química , Ensayo de Materiales/métodos , Conformación Molecular , Óxidos/química , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Band contrast (BC) is a qualitative measure of electron back-scattered diffraction (EBSD), which is derived from the intensity of the Kikuchi bands. The BC is dependent upon several factors including scanning electron microscope measurement parameters, EBSD camera setup, and the specimen itself (lattice defect and grain orientation). In this study, the effective factors for BC variations and the feasibility of using BC variations for the quantification of microstructure evolutions have been investigated. In addition, the effects of the lattice defect and the grain orientation on the BC variations are studied. Next, a shear-deformed microstructure of 316L stainless steel, which contains nanosized grains and a large portion of twin boundaries, is revealed by BC map and histogram. Recovery and recrystallization of shear-deformed 316L stainless steel are displayed by BC variations during isothermal annealing at 700 and 800°C, respectively. It is observed that the BC turns bright as the shear-deformed crystal structure is recovered or recrystallized.
RESUMEN
In the present work, the evolution of nanoparticles during annealing and hot-consolidation in mechanically alloyed Ni-22Cr-1.5Y, Ni-22Cr-1.5Y2O3 and Ni-3% Y2O3 was examined. The high-energy ball-milling of elemental powders resulted in the complete dissolution of the constituent Cr, Y, or Y2O3, forming a Ni-based solid solution. During the subsequent annealing, however, oxide particles precipitated from the solid solution. In the case of mechanically alloyed Ni-22Cr-1.5Y2O3, over-grown Cr2O3 precipitated at a temperature as low as above approximately 500 degrees C and ternary YCrO3 particles precipitated at 1100 degrees C. In the case of mechanically alloyed Ni-22Cr-1.5Y, on the other hand, the binary Y2O3 phase precipitated at 1100 degrees C during spark plasma sintering. The presence of Cr in the alloy composition facilitated the formation of Cr2O3 or YCrO3, and the precipitated oxides were highly prone to grain growth during hot-consolidation, sometimes reaching several micrometers. In Cr-exempt Ni-3%Y or Ni-3% Y2O3, however, the growth of nanodispersoids was restrained even at temperatures as high as 1000 degrees C and the resulting dispersoid was only nano-sized Y2O3.
RESUMEN
Powder mixtures of Ni, Cr, Fe and Y2O3 were high-energy ball-milled and subsequently sintered to fabricate Ni-based oxide-dispersion strengthened (ODS) alloys. Nano-sized Y2O3 and/or TiO2 seem to be dissolved in the Ni matrix forming a metastable solid solution during high-energy ball-milling or mechanical alloying (MA) process. The finely grained MA powders with high dislocation density facilitated the decomposition of oxides. The MA powders were consolidated to near-full density by spark plasma sintering at 1100 degrees C for 5 minutes in an Ar atmosphere. The Cr oxides as well as decomposed Y- and Ti-oxides thermally precipitated as oxide particles of several tens nanometers at this temperature, although sintering was carried out during a short time. The SPSed specimen showed a near full densification with almost pore-free microstructures. Examination of fractured surface showed a typical dimple rupture with fine and homogeneous distribution of dispersoids, indicating non-negligible room temperature ductility combined with high mechanical strength.
RESUMEN
Carbon nanofibers (CNFs) with uniquely oriented channels were prepared via selective catalytic gasification in air at 450 and 500 degrees C, using Pt or Ru nano particles as catalysts. Catalytic gasification was chosen because it can selectively generate channels in the vicinity of the catalyst particles at relatively low temperatures, where thermal oxidation does not intensively occur. The structures and surface properties of the CNFs were examined via X-ray diffraction, analysis of the nitrogen adsorption-desorption isotherms, and high-resolution transmission electron microscopy. The effects of the catalyst species and loading amount on the formation of pores (channels) were investigated. The gasification mechanism, especially the channeling direction, throught the selection of the gasification catalysts, is discussed based on the results. This process can be effectively utilized for preparation of porous carbons, which have a well-aligned graphitic structure, and also channel-type pores can be designed by selection of gasification catalysts and conditions. The present porous CNF can be applied for catalyst support in fuel cells, without further treatment (e.g., acid treatment for the removal of metallic components).
RESUMEN
Pt-Pd catalyst supported on nitrogen-doped carbon nanofiber (N-CNF) was prepared and evaluated as a cathode electrode of the direct methanol fuel cell (DMFC). The N-CNF, which was directly synthesized by the catalytic chemical vapor deposition from acetonitrile at 640 °C, was verified as having a change of electrochemical surface properties such as oxygen reduction reaction (ORR) activities and the electrochemical double layer compared with common carbon black (CB). To attain the competitive oxygen reduction reaction activity with methanol tolerance, the Pt and Pd metals were supported on the CB or the N-CNF. The physical and electrochemical characteristics of the N-CNF-supported Pt-Pd catalyst were examined and compared with catalyst supported on the CB. In addition, DMFC single cells using these catalysts as the cathode electrode were applied to obtain I-V polarization curves and constant current operating performances with high-concentration methanol as the fuel. Pt-Pd catalysts had obvious ORR activity even in the presence of methanol. The higher power density was obtained at all the methanol concentrations when it applied to the membrane electrode assembly (MEA) of the DMFC. When the N-CNF is used as the catalyst support material, a better performance with high-concentration methanol is expected.
RESUMEN
The methyl-CpG binding domain 1 (MBD1) protein plays an important role for transcriptional regulation of gene expression. Polymorphisms and haplotypes of the MBD1 gene may have an influence on MBD1 activity on gene expression profiles, thereby modulating an individual's susceptibility to lung cancer. To test this hypothesis, we investigated the association of MBD1 -634G>A, -501delT (-501 T/T, T/-, -/-), and Pro(401)Ala genotypes and their haplotypes with the risk of lung cancer in a Korean population. The MBD1 genotype was determined in 432 lung cancer patients and in 432 healthy control subjects who were frequency matched for age and gender. The -634GG genotype was associated with a significantly increased risk of overall lung cancer compared with the -634AA genotype [adjusted odds ratio (OR), 3.10; 95% confidence interval (95% CI), 1.24-7.75; P = 0.016]. When analyses were stratified according to the tumor histology, the -634GG genotype was associated with a significantly increased risk of adenocarcinoma compared with the -634AA genotype (adjusted OR, 4.72; 95% CI, 1.61-13.82; P = 0.005). For the MBD1 -501delT and Pro(401)Ala polymorphisms, the -501 T/T genotype was associated with a marginal significantly increased risk of adenocarcinoma compared with the -501(-/-) genotype (adjusted OR, 2.07; 95% CI, 1.02-4.20; P = 0.045), and the Pro/Pro genotype was associated with a significantly increased risk of adenocarcinoma compared with the Ala/Ala genotype (adjusted OR, 3.41; 95% CI, 1.21-9.60; P = 0.02). Consistent with the genotyping analyses, the -634G/-501T/(401)Pro haplotype was associated with a significantly increased risk of overall lung cancer and adenocarcinoma compared with the -634A/-501(-)/(401)Ala haplotype (adjusted OR, 1.44; 95% CI, 1.08-1.91; P = 0.012 and P(c) = 0.048; adjusted OR, 1.75; 95% CI, 1.20-2.56; P = 0.004 and P(c) = 0.016, respectively). On a promoter assay, the -634A allele had significantly higher promoter activity compared with the -634G allele in the Chinese hamster ovary cells and A549 cells (P < 0.05 and P < 0.001, respectively), but the -501delT polymorphism did not have an effect on the promoter activity. When comparing the promoter activity of the MBD1 haplotypes, the -634A/-501(-) haplotype had a significantly higher promoter activity than the -634G/-501T haplotype (P < 0.001). These results suggest that the MBD1 -634G>A, -501delT, and Pro(401)Ala polymorphisms and their haplotypes contribute to the genetic susceptibility for lung cancer and particularly for adenocarcinoma.
Asunto(s)
Adenocarcinoma/genética , Carcinoma de Pulmón de Células no Pequeñas/genética , Proteínas de Unión al ADN/genética , Neoplasias Pulmonares/genética , Polimorfismo Genético , Factores de Transcripción/genética , Adenocarcinoma/etiología , Anciano , Carcinoma de Pulmón de Células no Pequeñas/etiología , Estudios de Casos y Controles , Proteínas de Unión al ADN/fisiología , Femenino , Perfilación de la Expresión Génica , Predisposición Genética a la Enfermedad , Haplotipos , Humanos , Corea (Geográfico) , Neoplasias Pulmonares/etiología , Masculino , Persona de Mediana Edad , Oportunidad Relativa , Regiones Promotoras Genéticas , Factores de Riesgo , Factores de Transcripción/fisiologíaRESUMEN
An in vivo tumor targeting test of glycol-chitosan nanoaggregates was carried out with FITC-conjugated glycol-chitosan nanoaggregates (FTC-GC) and the doxorubicin conjugated glycol-chitosan (GC-DOX). To investigate its biodistribution in tumor-bearing rats, glycol-chitosan was labeled with fluorescein isothiocyanate (FITC), which formed nanoaggregates with a diameter of about 250 nm in aqueous media. GC-DOX nanoaggregates containing acid-sensitive spacers were prepared. The GC-DOX formed micelle-like nanoaggregates spontaneously in aqueous media. GC-DOX nanoaggregates had a narrow and unimodal size distribution, and its hydrodynamic diameter measured by dynamic light scattering ranged from 250 to 300 nm. A loading content of doxorubicin into GC-DOX nanoaggregates as high as 38%, with 97% loading efficiency, could be obtained using a physical entrapment method. A tumor-bearing animal model was developed by inoculating tumor cells into the back of a rat. The FTC-GC nanoaggregates were injected into the tail vein of tumor-bearing rats and their tissue distribution was examined. The FTC-GC nanoaggregates were distributed mainly in kidney, tumor and the liver and were scarcely observed in other tissues. They were maintained at a high level for 8 days and their distribution in tumor tissues increased gradually. This suggests that chitosan nanoaggregates accumulate passively in the tumor tissue due to the enhanced permeability and retention (EPR) effect. Doxorubicin loaded GC-DOX nanoaggregates (DOX/GC-DOX) were injected into the tail vein of tumor-bearing rats and their anti-tumor effect was examined. Tumor growth was suppressed over 10 days.
Asunto(s)
Antibióticos Antineoplásicos/farmacocinética , Antibióticos Antineoplásicos/uso terapéutico , Quitina/análogos & derivados , Doxorrubicina/farmacocinética , Doxorrubicina/uso terapéutico , Animales , Antibióticos Antineoplásicos/administración & dosificación , Quitina/química , Quitosano , Doxorrubicina/administración & dosificación , Sistemas de Liberación de Medicamentos , Excipientes , Fluoresceína-5-Isotiocianato , Colorantes Fluorescentes , Glicoles/química , Humanos , Concentración de Iones de Hidrógeno , Luz , Masculino , Microscopía Electrónica , Trasplante de Neoplasias , Tamaño de la Partícula , Permeabilidad , Ratas , Ratas Endogámicas F344 , Dispersión de Radiación , Distribución Tisular , Células Tumorales CultivadasRESUMEN
BACKGROUND: Novel and targetable mutations are needed for improved understanding and treatment of lung cancer in never-smokers. METHODS: Twenty-seven lung adenocarcinomas from never-smokers were sequenced by both exome and mRNA-seq with respective normal tissues. Somatic mutations were detected and compared with pathway deregulation, tumor phenotypes and clinical outcomes. RESULTS: Although somatic mutations in DNA or mRNA ranged from hundreds to thousands in each tumor, the overlap mutations between the two were only a few to a couple of hundreds. The number of somatic mutations from either DNA or mRNA was not significantly associated with clinical variables; however, the number of overlap mutations was associated with cancer subtype. These overlap mutants were preferentially expressed in mRNA with consistently higher allele frequency in mRNA than in DNA. Ten genes (EGFR, TP53, KRAS, RPS6KB2, ATXN2, DHX9, PTPN13, SP1, SPTAN1 and MYOF) had recurrent mutations and these mutations were highly correlated with pathway deregulation and patient survival. CONCLUSIONS: The recurrent mutations present in both DNA and RNA are likely the driver for tumor biology, pathway deregulation and clinical outcomes. The information may be used for patient stratification and therapeutic target development.
Asunto(s)
Adenocarcinoma/tratamiento farmacológico , Adenocarcinoma/genética , Secuencia Conservada/genética , Neoplasias Pulmonares/tratamiento farmacológico , Neoplasias Pulmonares/genética , Mutación/genética , Transducción de Señal/genética , Fumar/genética , Adenocarcinoma/patología , Adenocarcinoma del Pulmón , Análisis Mutacional de ADN , ADN de Neoplasias/genética , Exoma/genética , Femenino , Perfilación de la Expresión Génica , Regulación Neoplásica de la Expresión Génica , Redes Reguladoras de Genes , Humanos , Estimación de Kaplan-Meier , Neoplasias Pulmonares/patología , Masculino , Persona de Mediana Edad , Polimorfismo de Nucleótido Simple/genética , ARN Mensajero/genética , ARN Mensajero/metabolismo , Reproducibilidad de los Resultados , Resultado del TratamientoRESUMEN
O6-alkylguanine-DNA alkyltransferase (AGT) plays an important role in the repair of O6-alkylguanine adducts, which are major mutagenic lesions produced by environmental carcinogens. Polymorphisms in the AGT gene may affect the capacity to repair DNA damage and thereby have influence on individual's susceptibility to smoking-related cancer. To test this hypothesis, we investigated the potential association of AGT polymorphisms (485C > A, Leu53Leu (C > T) and Leu84Phe] with the risk of lung cancer in a Korean population. The AGT genotypes were determined in 432 lung cancer patients and in 432 healthy controls who were frequency-matched for age and gender. The 485 AA genotype was associated with a significantly increased risk for overall lung cancer as compared with the 485 CC genotype and the combined 485 CC + CA genotype, respectively (adjusted odds ratio (OR) = 1.83, 95% confidence interval (CI) = 1.12-2.99, P = 0.02, and Bonferroni corrected P-value (Pc) = 0.04; and adjusted OR = 1.67, 95% CI = 1.05-2.66, P = 0.03, respectively). When the lung cancer cases were categorized by the tumor histology, the 485 AA genotype was associated with a significantly increased risk of adenocarcinoma (AC) and small cell carcinoma (SmCC), respectively, as compared with the combined 485 CC + CA genotype (adjusted OR = 2.54, 95% CI = 1.39-4.66, P = 0.003; and adjusted OR = 2.19, 95% CI = 1.06-4.55, P = 0.04, respectively). However, the genotype distributions of the Leu53Leu and Leu84Phe polymorphisms were not significantly different between the lung cancer cases and the controls. On a promoter assay, the 485C > A polymorphism did not have an effect on the promoter activity of the AGT gene. These results suggest that the effect of the AGT 485C > A polymorphism on the risk of lung cancer may be secondary to linkage disequilibrium (LD) with either another AGT variant or with a true susceptibility gene, and that the AGT 485C > A polymorphism could be used as a marker for the genetic susceptibility to lung cancer.
Asunto(s)
Neoplasias Pulmonares/genética , O(6)-Metilguanina-ADN Metiltransferasa/metabolismo , Polimorfismo Genético/genética , Adenocarcinoma/enzimología , Adenocarcinoma/genética , Adenocarcinoma/patología , Adulto , Carcinoma de Células Grandes/enzimología , Carcinoma de Células Grandes/genética , Carcinoma de Células Grandes/patología , Carcinoma de Células Pequeñas/enzimología , Carcinoma de Células Pequeñas/genética , Carcinoma de Células Pequeñas/patología , Carcinoma de Células Escamosas/enzimología , Carcinoma de Células Escamosas/genética , Carcinoma de Células Escamosas/patología , Estudios de Casos y Controles , Daño del ADN , Reparación del ADN , Femenino , Predisposición Genética a la Enfermedad , Genotipo , Humanos , Neoplasias Pulmonares/enzimología , Neoplasias Pulmonares/patología , Masculino , Regiones Promotoras Genéticas/genética , Factores de RiesgoRESUMEN
Polymorphisms in DNA repair genes may be associated with differences in the capacity to repair DNA damage and thereby influence an individual's susceptibility to smoking-related cancer. To test this hypothesis, we investigated the potential association of 7 XPC polymorphisms (-449G-->C, -371G-->A, -27G-->C, Val499Arg, PAT-/+, IVS11-5C-->A and Lys939Gln) and their haplotypes with lung cancer risk in a Korean population. XPC genotypes were determined in 432 lung cancer patients and 432 healthy controls frequency-matched for age and sex. XPC haplotypes were predicted using a Bayesian algorithm in the Phase program. The combined -27CG+CC genotype was associated with a significantly increased risk for overall lung cancer compared to the -27GG genotype (adjusted OR = 1.97, 95% CI 1.22-3.17, p = 0.005). The other 6 polymorphisms were not significantly associated with overall risk of lung cancer. When lung cancer cases were categorized by tumor histology, the -371AA genotype was associated with a significantly increased risk of squamous cell carcinoma compared to the combined -371GG and GA genotype (adjusted OR = 2.08, 95% CI 1.09-4.00, p = 0.03). The PAT-/+, IVS11-5C-->A and Lys939Gln polymorphisms were associated with a significantly decreased risk of small cell carcinoma (SM) under a dominant model for the polymorphic allele (adjusted OR = 0.49, 95% CI 0.29-0.82, p = 0.006; adjusted OR = 0.60, 95% CI 0.36-1.00, p = 0.05; and adjusted OR = 0.58, 95% CI 0.35-0.97, p = 0.04, respectively). Consistent with genotyping analyses, haplotype 4 (1112222) containing the PAT+/IVS11-5A/939Gln alleles was associated with a significantly decreased risk of SM (adjusted OR = 0.56, 95% CI 0.37-0.85, p = 0.007 and Bonferroni-corrected p = 0.049), whereas haplotype 5 (1122111) containing the -27C allele was associated with a significantly increased risk of SM (adjusted OR = 2.88, 95% CI 1.41-5.87, p = 0.004 and Bonferroni-corrected p = 0.028). These results suggest that XPC polymorphisms/haplotypes may contribute to genetic susceptibility for lung cancer.
Asunto(s)
Reparación del ADN , Proteínas de Unión al ADN/genética , Predisposición Genética a la Enfermedad , Neoplasias Pulmonares/genética , Polimorfismo Genético , Anciano , Estudios de Casos y Controles , Daño del ADN , Femenino , Genotipo , Haplotipos , Humanos , Corea (Geográfico)/epidemiología , Neoplasias Pulmonares/epidemiología , Masculino , Persona de Mediana Edad , Factores de Riesgo , Fumar/efectos adversos , TransglutaminasasRESUMEN
DNA-methyltransferase-3B (DNMT3B) plays an important role in the generation of aberrant methylation in carcinogenesis. Polymorphisms and haplotypes of the DNMT3B gene may influence DNMT3B activity on DNA methylation, thereby modulating the susceptibility to lung cancer. To test this hypothesis, we investigated the association of the -283T > C (from exon 1A transcription start site) and -579G > T (from exon 1B transcription start site) polymorphisms in DNMT3B promoter, and their haplotypes with the risk of lung cancer in a Korean population. The DNMT3B genotype was determined in 432 lung cancer patients and 432 healthy controls that were frequency-matched for age and sex. Individuals with at least one -283T allele were at a significantly decreased risk of adenocarcinoma (AC) and small cell carcinoma (SM) [adjusted odds ratio (OR) = 0.48, 95% confidence interval (CI) = 0.28-0.82, P = 0.007; and adjusted OR = 0.47, 95% CI = 0.24-0.93, P = 0.03, respectively] compared with those harboring a -283CC genotype. Individuals with at least one -579G allele were also at a significantly decreased risk of AC and SM (adjusted OR = 0.47, 95% CI = 0.28-0.81, P = 0.006; and adjusted OR = 0.51, 95% CI = 0.26-0.99, P = 0.048, respectively) compared with those having a -579TT genotype. The -283T allele was linked with the -579G allele, and haplotype -283T/-579G was associated with a significantly decreased risk of AC (adjusted OR = 0.48, 95% CI = 0.29-0.81, P = 0.006) as compared with haplotype -283C/-579T. In a promoter assay, carriage of the -283T allele showed a significantly lower promoter activity ( approximately 50%) compared with the -283C allele (P < 0.001), but the -579G > T polymorphism did not have an affect on the DNMT3B promoter activity. These results suggest that the DNMT3B -283T > C polymorphism influences DNMT3B expression, thus contributing to the genetic susceptibility to lung cancer.