Unmasking the Electrochemical Stability of N-Heterocyclic Carbene Monolayers on Gold.

N-heterocyclic carbene (NHC) monolayers are transforming electrocatalysis and biosensor design via their increased performance and stability. Despite their increasing use in electrochemical systems, the integrity of the NHC monolayer during voltage perturbations remains largely unknown. Herein, we deploy surface-enhanced Raman spectroscopy (SERS) to measure the stability of two model NHCs on gold in ambient conditions as a function of applied potential and under continuous voltammetric interrogation. Our results illustrate that NHC monolayers exhibit electrochemical stability over a wide voltage window (-1 V to 0.5 V vs Ag|AgCl), but they are found to degrade at strongly reducing (< -1 V) or oxidizing (>0.5 V) potentials. We also address NHC monolayer stability under continuous voltammetric interrogation between 0.2 V and -0.5 V, a commonly used voltage window for sensing, showing they are stable for up to 43 hours. However, we additionally find that modifications of the backbone NHC structure can lead to significantly shorter operational lifetimes. While these results highlight the potential of NHC architectures for electrode functionalization, they also reveal potential pitfalls that have not been fully appreciated in electrochemical applications of NHCs.

Solvent-Assisted Control of Metal-Organic Nanotube Size and Morphology.

While intensive studies have focused on the synthesis and characterization of new metal-organic nanotube (MONT) structures, the lack of size and morphology control remains an obstacle in broadening applications for this class of materials. Herein, we demonstrate control of MONT crystallite size and morphology by tuning polarity and the protic/aprotic nature of solvents, including dimethylformamide, N-methyl-2-pyrrolidone, ethanol, and 2-methyltetrahydrofuran, for the isostructural syntheses of two MONTs. Through a combination of transmission electron microscopy, powder X-ray diffraction, and selected area electron diffraction, we find that MONT crystallite sizes can be tuned while maintaining control over the relative dispersity without significantly altering the underlying crystal structure.

Giving Gold Wings: Ultrabright and Fragmentation Free Mass Spectrometry Reporters for Barcoding, Bioconjugation Monitoring, and Data Storage.

The widespread application of laser desorption/ionization mass spectrometry (LDI-MS) highlights the need for a bright and multiplexable labeling platform. While ligand-capped Au nanoparticles (AuNPs) have emerged as a promising LDI-MS contrast agent, the predominant thiol ligands suffer from low ion yields and extensive fragmentation. In this work, we develop a N-heterocyclic carbene (NHC) ligand platform that enhances AuNP LDI-MS performance. NHC scaffolds are tuned to generate barcoded AuNPs which, when benchmarked against thiol-AuNPs, are bright mass tags and form unfragmented ions in high yield. To illustrate the transformative potential of NHC ligands, the mass tags were employed in three orthogonal applications: monitoring a bioconjugation reaction, performing multiplexed imaging, and storing and reading encoded information. These results demonstrate that NHC-nanoparticle systems are an ideal platform for LDI-MS and greatly broaden the scope of nanoparticle contrast agents.

Late Lanthanide Macrocyclic Tetra-NHC Complexes.

An isostructural set of macrocyclic tetra-N-heterocyclic carbene (NHC) complexes were synthesized on late lanthanides including Lu, Yb, Ho, Dy, and Gd. They were characterized by single-crystal X-ray diffraction, multinuclear NMR, electrochemistry, and SQUID magnetometry. Solid-state structures show that all complexes are in a highly distorted square-pyramidal geometry with an axial HMDS ligand. 1H NMR for Lu, Yb, and Dy demonstrates that these geometries are maintained in solution. Electrochemical measurements on the Yb complex show that the NHCs are very strong σ-donors compared to other organometallic Yb complexes. Magnetic measurements of the Yb and Dy complexes reveal slow relaxation of the magnetization in both complexes. The highly anisotropic Dy complex possesses an energy barrier to spin reversal of 52.42 K/36.43 cm-1 and waist-restricted hysteresis up to 2.8 K. Finally, an 18-atom macrocycle variant of the Lu complex was synthesized for comparison in reactivity and stability. These complexes are the first lanthanides prepared with macrocyclic NHCs and suggest that NHCs may be a promising ligand for developing single-molecule magnets.

Probing N-Heterocyclic Carbene Surfaces with Laser Desorption Ionization Mass Spectrometry.

The proliferation of N-heterocyclic carbene (NHC) self-assembled monolayers (SAMs) on gold surfaces stems from their exceptional stability compared to conventional thiol-SAMs. The prospect of biological applications for NHC-SAMs on gold shows the need for biocompatible techniques (e.g., large biomolecule detection and high throughput) that assesses SAM molecular composition. Herein, we demonstrate that laser desorption ionization mass spectrometry (LDI-MS) is a powerful and facile probe of NHC surface chemistry. LDI-MS of prototypical imidazole-NHC- and benzimidazole-NHC-functionalized AuNPs yields exclusively [NHC2Au]+ ions and not larger gold clusters. Employing benzimidazole-NHC isotopologues, we explore how monolayers pack on a single AuNP and the lability of the NHCs once ligated. Quantitative analysis of the homoleptic and heteroleptic [NHC2Au]+ ions is performed by comparing to a binomial model representative of a randomized monolayer. Lastly, the reduction of nitro-NHC-AuNPs to amine-NHC-AuNPs is tracked via LDI-MS signals, illustrating the ability of LDI-MS to probe postsynthetic modifications of the anchored NHCs, which is critical for current and future applications of NHC surfaces.

Imidazolinium N-Heterocyclic Carbene Ligands for Enhanced Stability on Gold Surfaces.

N-heterocyclic carbenes (NHCs) have emerged as versatile and robust ligands for noble metal surface modifications due to their ability to form compact, self-assembled monolayers. Despite a growing body of research, previous NHC surface modification schemes have employed just two structural motifs: the benzimidazolium NHC and the imidazolium NHC. However, different NHC moieties, including saturated NHCs, are often more effective in homogenous catalysis chemistry than these aforementioned motifs and may impart numerous advantages to NHC surfaces, such as increased stability and access to chiral groups. This work explores the preparation and stability of NHC-coated gold surfaces using imidazolium and imidazolinium NHC ligands. X-ray photoelectron spectroscopy and surface-enhanced Raman spectroscopy demonstrate the attachment of NHC ligands to the gold surface and show enhanced stability of imidazolinium compared to the traditional imidazolium under harsh acidic conditions.

A Chiral Macrocyclic Tetra-N-Heterocyclic Carbene Yields an "All Carbene" Iron Alkylidene Complex.

The first chiral macrocyclic tetra-N-heterocyclic carbene (NHC) ligand has been synthesized. The macrocycle, prepared in high yield and large scale, was ligated onto palladium and iron to give divalent C2 -symmetric square planar complexes. Multinuclear NMR and single crystal X-ray diffraction demonstrated that there are two distinct NHCs on each ligand, due to the bridging chiral cyclohexane. Oxidation of the iron(II) complex with trimethylamine N-oxide yielded a bridging oxo complex. Diazodiphenylmethane reacted with the iron(II) complex at room temperature to give a paramagnetic diazoalkane complex; the same reaction yielded the "all carbene" complex at elevated temperature. Electrochemical measurements support the assignment of the "all carbene" complex being an alkylidene. Notably, the diazoalkane complex can be directly transformed into the alkylidene complex, which had not been previously demonstrated on iron. Finally, a test catalytic reaction with a diazoalkane on the iron(II) complex does not yield the expected cyclopropane, but actually the azine compound.

A Benchtop Method for Appending Protic Functional Groups to N-Heterocyclic Carbene Protected Gold Nanoparticles.

The remarkable resilience of N-heterocyclic carbene (NHC) gold bonds has quickly made NHCs the ligand of choice when functionalizing gold surfaces. Despite rapid progress using deposition from free or CO2 -protected NHCs, synthetic challenges hinder the functionalization of NHC surfaces with protic functional groups, such as alcohols and amines, particularly on larger nanoparticles. Here, we synthesize NHC-functionalized gold surfaces from gold(I) NHC complexes and aqueous nanoparticles without the need for additional reagents, enabling otherwise difficult functional groups to be appended to the carbene. The resilience of the NHC-Au bond allows for multi-step post-synthetic modification. Beginning with the nitro-NHC, we form an amine-NHC terminated surface, which further undergoes amide coupling with carboxylic acids. The simplicity of this approach, its compatibility with aqueous nanoparticle solutions, and its ability to yield protic functionality, greatly expands the potential of NHC-functionalized noble metal surfaces.

Elucidating the Growth of Metal-Organic Nanotubes Combining Isoreticular Synthesis with Liquid-Cell Transmission Electron Microscopy.

Metal-organic nanotubes (MONTs) are tunable porous 1D materials that are envisioned to be complementary to carbon nanotubes for anisotropic applications. To date, characterization of MONTs relies on single crystal X-ray diffraction (SCXRD) to determine structure and composition. This requires crystals on the micrometer regime, effectively rendering bulk 3D materials. By tracking the growth of a MONT as a function of time with liquid-cell transmission electron microscopy (LCTEM), TEM, and SCXRD, it was possible to ascertain that the material in the bulk phase matches the nanomaterial in terms of molecular structure. This result allowed for the first measurements of finite bundles of MONTs on the nanometer scale. By employing in situ LCTEM, a time course of the formation of small bundles of MONTs could be acquired which provided mechanistic information on MONT formation which is of utility in reaction optimization and applications development.

Unprecedented Five-Coordinate Iron(IV) Imides Generate Divergent Spin States Based on the Imide R-Groups.

Three five-coordinate iron(IV) imide complexes have been synthesized and characterized. These novel structures have disparate spin states on the iron as a function of the R-group attached to the imide, with alkyl groups leading to low-spin diamagnetic (S=0) complexes and an aryl group leading to an intermediate-spin (S=1) complex. The different spin states lead to significant differences in the bonding about the iron center as well as the spectroscopic properties of these complexes. Mössbauer spectroscopy confirmed that all three imide complexes are in the iron(IV) oxidation state. The combination of diamagnetism and 15 N labeling allowed for the first 15 N NMR resonance recorded on an iron imide. Multi-reference calculations corroborate the experimental structural findings and suggest how the bonding is distinctly different on the imide ligand between the two spin states.

N-Heterocyclic Carbenes as a Robust Platform for Surface-Enhanced Raman Spectroscopy.

Surface-enhanced Raman spectroscopy (SERS) underpins a wide range of commercial and fundamental applications. SERS often relies on ligands, usually thiols, bound to a noble metal surface. The difficulty of straightforward thiol synthesis combined with their instability on surfaces highlights the need for alternative ligand design. We present the first example of SERS utilizing N-heterocyclic carbene ligands. A general three step synthesis is presented for functionalized NHC-CO2 adducts. These ligands are deposited on SERS-active gold film-over-nanosphere substrates (AuFONs) in solvent-free and base-free conditions, which prevents fouling. The resulting films are found to be robust and capable of postsynthetic modifications.

A Chromium(II) Tetracarbene Complex Allows Unprecedented Oxidative Group Transfer.

Multiple distinct oxidative group transfer reactions to low valent chromium were examined. Six new chromium complexes were prepared from a highly electronically unsaturated Cr(II) square planar complex that was supported by a macrocyclic tetracarbene ligand. This complex's reactivity with Me3NO and disparate azides was investigated. The reaction with Me3NO generated a highly stable Cr(IV)-oxo complex. Less bulky organic azides such as p-tolyl and n-octyl azides gave rise to metallotetrazenes, while more sterically demanding mesityl and adamantyl azides generated Cr(IV)-imido complexes. The reaction of the square planar Cr(II) complex with TMS-azide yielded the first linearly bridging nitrido chromium species. Reductive group transfer was explored for a Cr(IV)-imido complex, and organic products, such as aziridines, were formed after addition. Cr(IV) imidos and oxos are quite rare, while tetrazenes and bridging nitridos are virtually unknown. This is the most detailed study on oxidative group transfer reactions using chromium based complexes on a single auxiliary ligand to date.

Isostructural synthesis of porous metal-organic nanotubes.

Employment of semirigid double-hinged di-1,2,4-triazoles has led to the synthesis of an isostructural series of metal-organic nanotubes (MONTs). The ditriazole ligands adopt a syn conformation between rigid metal chains while an appropriate anion choice provides a "capping" of the metal ions, leading to MONT formation. This approach of utilizing a variety of both semirigid ligands and metals is the first general methodology to prepare this class of 1D nanomaterial. The local geometry at the metal center depends on the metal ion employed, with Cu(I) centers adopting a tetrahedral geometry, Ag(I) centers adopting a seesaw geometry, and Cu(II) centers adopting a square-pyramidal geometry upon MONT synthesis. The pore size of the MONTs is adjusted by changing the central portion of the double-hinged ligand, allowing for a predictable method to control the pore width of the MONT. The adsorption properties of MONTs as a function of pore size revealed selective uptake of CO2 and CH4, with copper MONTs exhibiting the highest uptake. In the case of the silver MONTs, an increase in pore width improves both gas uptake and selectivity.

Rotating phenyl rings as a guest-dependent switch in two-dimensional metal-organic frameworks.

A semirigid bis(1,2,4-triazole) ligand binds in a syn conformation between copper(I) chains to form a series of two-dimensional metal-organic frameworks that display a topology of fused one-dimensional metal-organic nanotubes. These anisotropic frameworks undergo two different transformations in the solid state as a function of solvation. The 2D sheet layers can expand or contract, or, more remarkably, the phenyl rings can rotate between two distinct positions. Rotation of the phenyl rings allows for the adjustment of the tube size, depending on the guest molecules present. This "gate" effect along the 1D tubes has been characterized through single-crystal X-ray diffraction. The transformations can also be followed by powder X-ray diffraction (PXRD) and solid-state (13)C cross-polarization magic-angle-spinning (CP-MAS) NMR. Whereas PXRD cannot differentiate between transformations, solid-state (13)C CP-MAS NMR can be employed to directly monitor phenyl rotation as a function of solvation, suggesting that this spectroscopic method is a powerful approach for monitoring breathing in this novel class of frameworks. Finally, simulations show that rotation of the phenyl ring from a parallel orientation to a perpendicular orientation occurs at the cost of framework-framework energy and that this energetic cost is offset by stronger framework-solvent interactions.

Disparate reactivity of a chiral iron(II) tetracarbene complex with organic azides.

A chiral tetra-NHC iron(II) complex and its disparate reactivity with multiple organic azides is reported. Both aryl and alkyl azides react with the iron(II) complex yielding three distinct products: an iron(IV) imide, an iron(IV) tetrazene, and a surprising and unprecedented double imide insertion complex.

Effects of solvation on the framework of a breathing copper MOF employing a semirigid linker.

A semirigid di-1,2,4-triazole ligand leads to formation of the MOF [Cu(2)(L)(2)(SO(4))(Br)(2)]·xH(2)O (1). The framework structure of 1 flexes reversibly upon removal or addition of water to form semihydrated ([Cu(2)(L)(2)(SO(4))(Br)(2)]·4H(2)O) and dehydrated ([Cu(2)(L)(2)(SO(4))(Br)(2)]·0H(2)O) MOFs, 1' and 1″, respectively. Single-crystal X-ray analysis demonstrated that the 2-butene subunit of the ligand rotates between two positions for 1 and 1', causing a change in the solvent-accessible volume in the framework. This double hinge within the semirigid ligand is a built-in breathing mechanism and suggests a novel approach for general synthesis of breathing MOFs.

Feasibility of a high-powered carbon nanotube thin-film loudspeaker.

The thermophone, conceived in 1917 by Arnold and Crandall, was a unique thermoacoustic loudspeaker. The high heat capacity per unit area (HCPUA) of thin-film materials at that time limited the usefulness of thermophones. Recently, researchers of carbon nanotubes (CNTs) have developed techniques to create a super-aligned thin-film of multi-walled CNTs, possessing extremely low HCPUA. This paper will discuss CNT thin-film loudspeaker theory as well as some initial investigations into the feasibility of a high-powered audio CNT speaker. The advantages of such a loudspeaker include: Ultra-lightweight, compact, no moving parts, low cost, and independence from expensive rare-earth materials.

Seeking a Au-C stretch on gold nanoparticles with 13C-labeled N-heterocyclic carbenes.

Gold nanoparticles were functionalized with natural abundance and 13C-labeled N-heterocyclic carbenes (NHCs) to investigate the Au-C stretch. A combinatorial approach of surface enhanced Raman spectroscopy (SERS) and density-functional theory (DFT) calculations highlighted vibrational modes significantly impacted by isotopic labeling at the carbene carbon. Critically, no isotopically-impacted stretching mode showed majority Au-C character.

Statistical copolymer metal organic nanotubes.

Metal-organic nanotubes (MONTs) are 1-dimensional crystalline porous materials that are formed from ligands and metals in a manner identical to more typical 3-dimensional metal-organic frameworks (MOFs). MONTs form anisotropically in one dimension making them excellent candidates for linker engineering for control of chemical composition and spacing. A novel series of MONTs was synthesized utilizing a mixture of 1,2,4-ditriazole ligands containing both a fully protonated aryl moiety and its tetrafluorinated analog in ratios of, 0 : 1, 1 : 4, 1 : 1, 4 : 1, and 1 : 0, respectively. All MONTs were characterized by both bulk and nanoscale measurements, including SCXRD, PXRD, ssNMR and TEM, to determine the resulting co-polymer architecture (alternating, block, or statistical) and the ligand ratios in the solid materials. All characterization methods point towards statistical copolymerization of the materials in a manner analogous to 3D MOFs, all of which notably could be achieved without destructive analytical methods.

Stability of N-Heterocyclic Carbene Monolayers under Continuous Voltammetric Interrogation.

N-Heterocyclic carbenes (NHCs) are promising monolayer-forming ligands that can overcome limitations of thiol-based monolayers in terms of stability, surface functionality, and reactivity across a variety of transition-metal surfaces. Recent publications have reported the ability of NHCs to support biomolecular receptors on gold substrates for sensing applications and improved tolerance to prolonged biofluid exposure relative to thiols. However, important questions remain regarding the stability of these monolayers when subjected to voltage perturbations, which is needed for applications with electrochemical platforms. Here, we investigate the ability of two NHCs, 1,3-diisopropylbenzimidazole and 5-(ethoxycarbonyl)-1,3-diisopropylbenzimidazole, to form monolayers via self-assembly from methanolic solutions of their trifluoromethanesulfonate salts. We compare the electrochemical behavior of the resulting monolayers relative to that of benchmark mercaptohexanol monolayers in phosphate-buffered saline. Within the -0.15 to 0.25 V vs Ag|AgCl voltage window, NHC monolayers are stable on gold surfaces, wherein they electrochemically perform like thiol-based monolayers and undergo similar reorganization kinetics, displaying long-term stability under incubation in buffered media and under continuous voltammetric interrogation. At negative voltages, NHC monolayers cathodically desorb from the electrode surface at lower bias (-0.1 V) than thiol-based monolayers (-0.5 V). At voltages more positive than 0.25 V, NHC monolayers anodically desorb from electrode surfaces at similar voltages to thiol-based monolayers. These results highlight new limitations to NHC monolayer stability imposed by electrochemical interrogation of the underlying gold electrodes. Our results serve as a framework for future optimization of NHC monolayers on gold for electrochemical applications, as well as structure-functionality studies of NHCs on gold.