RESUMEN
Decrease in processing speed due to increased resistance and capacitance delay is a major obstacle for the down-scaling of electronics1-3. Minimizing the dimensions of interconnects (metal wires that connect different electronic components on a chip) is crucial for the miniaturization of devices. Interconnects are isolated from each other by non-conducting (dielectric) layers. So far, research has mostly focused on decreasing the resistance of scaled interconnects because integration of dielectrics using low-temperature deposition processes compatible with complementary metal-oxide-semiconductors is technically challenging. Interconnect isolation materials must have low relative dielectric constants (κ values), serve as diffusion barriers against the migration of metal into semiconductors, and be thermally, chemically and mechanically stable. Specifically, the International Roadmap for Devices and Systems recommends4 the development of dielectrics with κ values of less than 2 by 2028. Existing low-κ materials (such as silicon oxide derivatives, organic compounds and aerogels) have κ values greater than 2 and poor thermo-mechanical properties5. Here we report three-nanometre-thick amorphous boron nitride films with ultralow κ values of 1.78 and 1.16 (close to that of air, κ = 1) at operation frequencies of 100 kilohertz and 1 megahertz, respectively. The films are mechanically and electrically robust, with a breakdown strength of 7.3 megavolts per centimetre, which exceeds requirements. Cross-sectional imaging reveals that amorphous boron nitride prevents the diffusion of cobalt atoms into silicon under very harsh conditions, in contrast to reference barriers. Our results demonstrate that amorphous boron nitride has excellent low-κ dielectric characteristics for high-performance electronics.
RESUMEN
Failure of a material is an irreversible process since the material loses its original characteristics and properties. The catastrophic brittle failure under tensile stress of nanoporous gold (np-Au) with a bicontinuous open-cell structure makes impossible otherwise attractive applications. Here, we first demonstrate a self-healing process in tensile-fractured np-Au to overcome the limit of fragility via mechanically assisted cold-welding under ambient conditions. The self-healing ability of np-Au in terms of mechanical properties shows strength recovery up to 64.4% and fully recovered elastic modulus compared with initial tensile properties. Topological parameters obtained by three-dimensional reconstruction of self-healed np-Au clarify the strength, elastic modulus, and strain distribution. The self-healing process in np-Au is attributed to surface diffusion expedited by local compressive stress in the ultrasmall dimension of ligaments formed by ductile failures of individual ligaments.
RESUMEN
BACKGROUND: A persistent hyaloid artery is a rare fetal remnant. Several complications such as amblyopia, vitreous hemorrhage, and retinal detachment have been reported. Here, we present a case of vitreous hemorrhage with a persistent hyaloid artery. CASE PRESENTATION: A healthy 16-year-old male presented with blurred vision in his left eye. Vitreous hemorrhage occurred and absorbed spontaneously. Slit-lamp examination demonstrated a Mittendorf's dot and fundus examination revealed a persistent hyaloid artery. Optical coherence tomography (OCT) showed a Bergmeister's papilla. The blood flow of the persistent hyaloid artery via the Bergmeister's papilla was found by OCT angiography. CONCLUSION: The persistent hyaloid artery should be considered as a cause of spontaneous vitreous hemorrhage of young healthy patient. The OCT angiography will be a useful noninvasive approach to confirm the patency of the persistent hyaloid artery.
Asunto(s)
Angiografía con Fluoresceína/métodos , Vítreo Primario Hiperplásico Persistente/diagnóstico , Vasos Retinianos/diagnóstico por imagen , Tomografía de Coherencia Óptica/métodos , Agudeza Visual , Adolescente , Fondo de Ojo , Humanos , Masculino , Vítreo Primario Hiperplásico Persistente/complicaciones , Hemorragia Vítrea/diagnóstico , Hemorragia Vítrea/etiologíaRESUMEN
The surface mechanics of soft solids are important in many natural and technological applications. In this context, static and dynamic wetting of soft polymer gels has emerged as a versatile model system. Recent experimental observations have sparked controversial discussions of the underlying theoretical description, ranging from concentrated elastic forces over strain-dependent solid surface tensions to poroelastic deformations or the capillary extraction of liquid components in the gel. Here we present measurements of the shapes of moving wetting ridges with high spatiotemporal resolution, combining distinct wetting phases (water, FC-70, air) on different ultrasoft PDMS gels (â¼100Pa). Comparing our experimental results to the asymptotic behavior of linear viscoelastocapillary theory in the vicinity of the ridge, we separate reliable measurements from potential resolution artifacts. Remarkably, we find that the commonly used elastocapillary scaling fails to collapse the ridge shapes, but, for small normal forces, yields a viable prediction of the dynamic ridge angles. We demonstrate that neither of the debated theoretical models delivers a quantitative description, while the capillary extraction of an oil skirt appears to be the most promising.
RESUMEN
BACKGROUND/OBJECTIVES: Although it has been reported that thyroid-stimulating immunoglobulin (TSI) is associated with the clinical characteristics of thyroid eye disease (TED), there is a paucity of literature regarding the role of TSI in diagnosing active TED. This study investigated the relationship between the level of TSI and the activity of TED and assessed the cut-off value of TSI discriminating active TED from inactive TED. METHODS: This cross-sectional study included 101 patients with TED. TSI was quantitatively measured with a cell-based bioassay using a chimeric TSH receptor and a cyclic adenosine monophosphate response element-dependent luciferase. The association between TSI and a variety of demographic and clinical features of TED was analysed. Multivariate regression analysis was performed to determine possible independent factors affecting the level of TSI. RESULTS: TSI level was higher in males than in females (p = 0.023) and smokers than in nonsmokers (p = 0.004). TSI level was inversely correlated with the duration of ocular symptoms (r = -0.295, p = 0.003). The level of TSI was also significantly different when compared to the thyroid function (p = 0.003), TED activity (p < 0.001), and TED severity (p = 0.001). Multivariate regression analysis revealed a significant relationship between TED activity and thyroid function jointly and the TSI level. The cut-off level of TSI for predicting active TED was a specimen-to-reference ratio of 406.7 (p < 0.001, area under the curve = 0.847, sensitivity 77.4%, specificity 81.3%). CONCLUSIONS: TSI was a functional biomarker strongly associated with TED activity even after being adjusted by other clinical characteristics. Serum TSI level may help identify patients with active TED in clinics.
Asunto(s)
Oftalmopatía de Graves , Masculino , Femenino , Humanos , Inmunoglobulinas Estimulantes de la Tiroides , Estudios Transversales , Relevancia Clínica , BiomarcadoresRESUMEN
Organic-inorganic hybrid perovskites are emerging as promising emitting materials due to their narrow full-width at half-maximum emissions, color tunability, and high photoluminescence quantum yields (PLQYs). However, the thermal generation of free charges at room temperature results in a low radiative recombination rate and an excitation-intensity-dependent PLQY, which is associated with the trap density. Here, we report perovskite films composed of uniform nanosized single crystals (average diameter = 31.7 nm) produced by introducing bulky amine ligands and performing the growth at a lower temperature. By effectively controlling the crystal growth, we maximized the radiative bimolecular recombination yield by reducing the trap density and spatially confining the charges. Finally, highly bright and efficient green emissive perovskite light-emitting diodes that do not suffer from electroluminescence blinking were achieved with a luminance of up to 55â¯400 cd m-2, current efficiency of 55.2 cd A-1, and external quantum efficiency of 12.1%.
RESUMEN
We fabricate nanotubular ZnO with wall thickness of 45, 92, 123 nm using nanoporous gold (np-Au) with ligament diameter at necks of 1.43 µm as sacrificial template. Through micro-tensile and micro-compressive testing of nanotubular ZnO structures, we find that the exponent m in [Formula: see text], where [Formula: see text] is the relative strength and [Formula: see text] is the relative density, for tension is 1.09 and for compression is 0.63. Both exponents are lower than the value of 1.5 in the Gibson-Ashby model that describes the relation between relative strength and relative density where the strength of constituent material is independent of external size, which indicates that strength of constituent ZnO increases as wall thickness decreases. We find, based on hole-nanoindentation and glazing incidence X-ray diffraction, that this wall-thickness-dependent strength of nanotubular ZnO is not caused by strengthening of constituent ZnO by size reduction at the nanoscale. Finite element analysis suggests that the wall-thickness-dependent strength of nanotubular ZnO originates from nanotubular structures formed on ligaments of np-Au.