SU-8 free-standing microfluidic probes.

We present a process for fabrication of free-standing SU-8 probes, with a dry, mechanical release of the final micro-devices. The process utilizes the thermal release tape, a commonly used cleanroom material, for facile heat-release from the sacrificial layer. For characterization of the SU-8 microfluidic probes, two liquid interfaces were designed: a disposable interface with integrated wells and an interface with external liquid reservoirs. The versatility of the fabrication and the release procedures was illustrated by further developing the process to functionalize the SU-8 probes for impedance sensing, by integrating metal thin-film electrodes. An additional interface scheme which contains electronic components for impedance measurements was developed. We investigated the possibilities of introducing perforations in the SU-8 device by photolithography, for solution sampling predominantly by diffusion. The SU-8 processes described here allow for a convenient batch production of versatile free-standing microfluidic devices with well-defined tip-geometry.

Millimeter-wave sensor based on a λ/2-line resonator for identification and dielectric characterization of non-ionic surfactants.

Studies of biological and artificial membrane systems, such as niosomes, currently rely on the use of fluorescent tags, which can influence the system under investigation. For this reason, the development of label-free, non-invasive detection techniques is of great interest. We demonstrate an open-volume label-free millimeter-wave sensing platform based on a coplanar waveguide, developed for identification and characterization of niosome constituents. A design based on a λ/2-line resonator was used and on-wafer measurements of transmission and reflection parameters were performed up to 110 GHz. Our sensor was able to clearly distinguish between common niosome constituents, non-ionic surfactants Tween 20 and Span 80, measuring a resonance shift of 3 GHz between them. The complex permittivities of the molecular compounds have been extracted. Our results indicate insignificant frequency dependence in the investigated frequency range (3 GHz - 110 GHz). Values of permittivity around 3.0 + 0.7i and 2.2 + 0.4i were obtained for Tween 20 and Span 80, respectively.

Self-assembly of [Et,Et]-bacteriochlorophyll cF on highly oriented pyrolytic graphite revealed by scanning tunneling microscopy.

The chlorosomal light-harvesting antennae of green phototrophic bacteria consist of large supramolecular aggregates of bacteriochlorophyll c (BChl c). The supramolecular structure of (3(1)-R/S)-BChl c on highly oriented pyrolytic graphite (HOPG) and molybdenum disulfide (MoS2) has been investigated by scanning tunneling microscopy (STM). On MoS2, we observed single BChl c molecules, dimers or tetramers, depending on the polarity of the solvent. On HOPG, we observed extensive self-assembly of the dimers and tetramers. We propose C=O...H-O...Mg bonding networks for the observed dimer chains, in agreement with former ultraviolet-visible and infrared spectroscopic work. The BChl c moieties in the tetramers are probably linked by four C=O...H-O hydrogen bonds to form a circle and further stabilized by Mg...O-H bondings to underlying BChl c layers. The tetramers form highly ordered, distinct chains and extended two-dimensional networks. We investigated semisynthetic chlorins for comparison by STM but observed that only BChl c self-assembles to well-structured large aggregates on HOPG. The results on the synthetic chlorins support our structure proposition.

Controlling chemistry by geometry in nanoscale systems.

Scientific literature dealing with the rates, mechanisms, and thermodynamic properties of chemical reactions in condensed media almost exclusively assumes that reactions take place in volumes that do not change over time. The reaction volumes are compact (such as a sphere, a cube, or a cylinder) and do not vary in shape. In this review article, we discuss two important systems at small length scales (approximately 10 nm to 5 microm), in which these basic assumptions are violated. The first system exists in cell biology and is represented by the tiniest functional components (i.e., single cells, organelles, and other physically delineated cellular microenvironments). The second system comprises nanofluidic devices, in particular devices made from soft-matter materials such as lipid nanotube-vesicle networks. In these two systems, transport, mixing, and shape changes can be achieved at or very close to thermal energy levels. In further contrast to macroscopic systems, mixing by diffusion is extremely efficient, and kinetics can be controlled by shape and volume changes.