RESUMEN
The droplet lossless directional motion control on slippery surfaces holds immense promise for applications in microfluidic chips, hazardous substance detection, chemical dispensing, etc. However, a significant challenge in this domain lies in efficiently developing soft, slippery surfaces with large-range anisotropic wettability and compatibility for curved scenarios. This study addressed this challenge through a quick 3D printing-assisted method to produce soft, ridged-slippery surfaces (SRSSs) as the droplet manipulation platform. The SRSSs demonstrated substantial anisotropic rolling resistances, measuring 116.9 µN in the perpendicular direction and 7.7 µN in the parallel direction, exhibiting a ratio of 15.2. Combining several extents of anisotropic wettability on a soft substrate could realize diverse reagent manipulation functions. Furthermore, these SRSSs showcased high compatibility with various droplet constituents, impressive liquid impact resistance, self-repair capability, and mechanical durability and thermal durability, ensuring exceptional applicability. As proofs of concept, the SRSSs were successfully applied in droplet control and classification for heavy metal ion detection, mechanical arm-based droplet grab and release, and cross-species transport, showcasing their remarkable versatility, compatibility, and practicality in advanced droplet microfluidic chips and water harvesting applications.
RESUMEN
Sewage sludge incineration ash (SSIA) is rich in phosphorus (P), thus being considered as a reliable source of phosphorus recovery. Different P species behaved significant bioavailability. Based on this, a comprehensive investigation into the bioavailability transition path of P species during sewage sludge (SS) incineration was conducted. P predominantly existed in the form of inorganic phosphorus (IP) in SS with a higher concentration of non-apatite inorganic phosphorus (NAIP) and less concentration of apatite inorganic phosphorus (AP). During the SS incineration process, OP existed in the flocs and cell structures of SS underwent destruction, the released P then combined with metal elements such as Ca, Mg, Fe, and Al to form AP species (Ca/Mg-P) and NAIP species (Fe/Al/Mn-P), and the NAIP decomposition to release into gas phase. This was the initial step for enhancing the bioavailability of P species. As temperature increased and the incineration process progressed, the low-temperature-resistant NAIP dissociated, and the metal-binding sites of Al, Fe and Mn in NAIP species were gradually replaced by the Ca and Mg thus forming thermal stability AP species (Ca/Mg-P, such as CaHPO4, Ca2PO4Cl, and Mg3(PO4)2 et al.). This step was crucial for the bioavailability improvement of P species during the incineration process. Therefore, the IP proportions in TP were extremely high (ï¼98%), and this value gradually increased as incineration temperature raised. The higher incineration temperature, the lower NAIP concentration and higher AP concentration. Besides, additives such as coal/rice husk/eggshell played a significant affect. Additives wither higher Ca content were inclined to react with P to form Ca/Mg-P (AP), while the presence of SO2 would react with Ca metals to form CaSO4 thus inhibiting the formation of AP species (such as CaHPO4 and CaPO4Cl). This results could provide theoretical support for the efficient and directional migration of P during sewage sludge incineration.
Asunto(s)
Fósforo , Aguas del Alcantarillado , Disponibilidad Biológica , Incineración , CalorRESUMEN
BACKGROUND: Liver surgery is associated with a significant hospital stay regardless the type of liver resection. A large incision is essential for open liver surgery which is a major factor in the course of the patient's recovery. For patients with small parenchyma liver lesions requiring surgical resection, robotic surgery potentially offers the opportunity to transform the patient's post-operative course. A day-case robotic liver resection pathway was formulated and implemented at our institution when patients were planned for discharge within 24 h of admission for liver surgery. METHODS: Single surgeon case series of cases performed at a tertiary hepatobiliary and pancreatic centre between September 2022 and November 2023. The inclusion criteria were non-anatomical wedge resections, < 2 anatomical segmental resections, left lateral hepatectomy and minimally invasive surgery. RESULTS: This is the first series of robotic day-case minor liver resection in the United Kingdom. 20 patients were included in this case series. The mean operative time was 86.6 ± 30.9 min and mean console time was 58.6 ± 24.5 min. Thirteen patients (65%) were discharged within 24 h of surgery. The main cause of hospitalisation beyond 24 h was inadequate pain relief. There were no Clavien-Dindo grade III or above complications, no 30-day readmission and 90-day mortalities. CONCLUSION: This case series demonstrates that robotic day-case liver resection is safe and feasible. Robust follow-up pathways must be in place to allow for the safe implementation of this approach, to monitor for any complications and to allow intervention as required in a timely manner.
Asunto(s)
Procedimientos Quirúrgicos Ambulatorios , Hepatectomía , Tempo Operativo , Procedimientos Quirúrgicos Robotizados , Humanos , Procedimientos Quirúrgicos Robotizados/métodos , Hepatectomía/métodos , Femenino , Persona de Mediana Edad , Masculino , Anciano , Procedimientos Quirúrgicos Ambulatorios/métodos , Tiempo de Internación/estadística & datos numéricos , Adulto , Centros de Atención TerciariaRESUMEN
The electrochemical reduction of CO2 to high-value carbon-based chemicals provides a sustainable approach to achieving an artificial carbon cycle. In the decade, metal-organic frameworks (MOFs), a kind of porous crystalline porous materials featuring well-defined structures, large surface area, high porosity, diverse components, easy tailorability, and controllable morphology, have attracted considerable research attention, serving as electrocatalysts to drive CO2 reduction. In this review, the reaction mechanisms of electrochemical CO2 reduction and the structure/component advantages of MOFs meeting the requirements of electrocatalysts for CO2 reduction are analyzed. After that, the representative progress for the precise fabrication of MOF-based electrocatalysts for CO2 reduction, focusing on catalytic site design and microenvironment modulation, are systemically summarized. Furthermore, the emerging applications and promising research for more practical scenarios related to electrochemical CO2 conversion are specifically proposed. Finally, the remaining challenges and future outlook of MOFs for electrochemical CO2 reduction are further discussed.
RESUMEN
Carbon-based single-atom catalysts (SACs) have attracted tremendous interest in heterogeneous catalysis. However, the common electric heating techniques to produce carbon-based SACs usually suffer from prolonged heating time and tedious operations. Herein, a general and facile microwave-assisted rapid pyrolysis method is developed to afford carbon-based SACs within 3â min without inert gas protection. The obtained carbon-based SACs present high porosity and comparable carbonization degree to those obtained by electric heating techniques. Specifically, the single-atom Ni implanted N-doped carbon (Ni1 -N-C) derived from a Ni-doped metal-organic framework (Ni-ZIF-8) exhibits remarkable CO Faradaic efficiency (96 %) with a substantial CO partial current density (jCO ) up to 1.06â A/cm2 in CO2 electroreduction, far superior to the counterpart obtained by traditional pyrolysis with electric heating. Mechanism investigations reveal that the resulting Ni1 -N-C presents abundant defective sites and mesoporous structure, greatly facilitating CO2 adsorption and mass transfer. This work establishes a versatile approach to rapid and large-scale synthesis of SACs as well as other carbon-based materials for efficient catalysis.
RESUMEN
Developing an electrocatalyst platform that can control the interplay among activity, selectivity, and stability at atomic precision remains a grand challenge. Here, we have synthesized highly crystalline polymetallophthalocyanines (pMPcs, M = Fe, Co, Ni, and Cu) through the annulation of tetracyanobenzene in the presence of transition metals. The conjugated, conductive, and stable backbones with precisely installed metal sites render pMPcs a unique platform in electrochemical catalysis, where tunability emerges from long-range interactions. The construction of pCoNiPc with a Co and Ni dual-site integrates the advantageous features of pCoPc and pNiPc in electrocatalytic CO2 reduction through electronic communication of the dual-site with an unprecedented long atomic separation of ≥14 chemical bonds. This integration provides excellent activity (current density, j = -16.0 and -100 mA cm-2 in H-type and flow cell, respectively), selectivity (CO Faraday efficiency, FECO = 94%), and stability (>10 h), making it one of the best-performing reticular materials.
RESUMEN
Precise detection involving droplets based on functional surfaces is promising for the parallelization and miniaturization of platforms and is significant in epidemic investigation, analyte recognition, environmental simulation, combinatorial chemistry, etc. However, a challenging and considerable task is obtaining mutually independent droplet arrays without cross-contamination and simultaneously avoiding droplet evaporation-caused quick reagent loss, inaccuracy, and failure. Herein, a strategy to generate mutually independent and hardly-volatile capsular droplet arrays using innovative mosaic patterned surfaces is developed. The evaporation suppression of the capsular droplet arrays is 1712 times higher than the naked droplet. The high evaporation suppression of the capsular droplet arrays on the surfaces is attributed to synergistic blocking of the upper oil and bottom mosaic gasproof layer. The scale-up of the capsular droplet arrays, the flexibility in shape, size, component (including aqueous, colloidal, acid, and alkali solutions), liquid volume, and the high-precision hazardous substance testing proves the concept's high compatibility and practicability. The mutually independent capsular droplet arrays with amazingly high evaporation suppression are essential for the new generation of high-performance open-surface microfluidic chips used in COVID-19 diagnosis and investigation, primary screening, in vitro enzyme reactions, environmental monitoring, nanomaterial synthesis, etc.
RESUMEN
Dual single atoms catalysts have promising application in bifunctional electrocatalysis due to their synergistic effect. However, how to balance the competition between rate-limiting steps (RDSs) of reversible oxygen reduction and oxygen evolution reaction (OER) and fully expose the active centers by reasonable structure design remain enormous challenges. Herein, Fe/N4 and Ni/N4 sites separated on different sides of the carbon nanosheets with Janus structure (FeNijns /NC) is synthesized by layer-by-layer assembly method. Experiments and calculations reveal that the side of Fe/N4 is beneficial to oxygen reduction reaction (ORR) and the Ni/N4 side is preferred to OER. Such Janus structure can take full advantage of two separate-sides of carbon nanosheets and balance the competition of RDSs during ORR and OER. FeNijns /NC possesses superior ORR and OER activity with ORR half-wave potential of 0.92 V and OER overpotential of 440 mV at J = 10 mA cm-2 . Benefiting from the excellent bifunctional activities, FeNijns /NC assembled aqueous Zn-air battery (ZAB) demonstrates better maximum power density, and long-term stability (140 h) than Pt/C+RuO2 catalyst. It also reveals superior flexibility and stability in solid-state ZAB. This work brings a novel perspective for rational design and understanding of the catalytic mechanisms of dual single atom catalysts.
RESUMEN
BACKGROUND: The coronavirus disease 2019 (COVID-19) pandemic caused unprecedented disruption to global healthcare delivery. In England, the majority of elective surgery was postponed or cancelled to increase intensive care capacity. Our unit instituted the 'RM Partners Cancer Hub' at the Royal Marsden Hospital in London, to deliver ongoing cancer surgery in a 'COVID-lite' setting. This article describes the operational set-up and outcomes for upper gastrointestinal (UGI) cancer resections performed during this period. METHODS: From April 2020 to April 2021, the Royal Marsden Hospital formed the RM Partners Cancer Hub. This approach was designed to coordinate resources and provide as much oncological treatment as feasible for patients across the RM Partners West London Cancer Alliance. A UGI surgical case prioritisation strategy, along with strict infection control pathways and pre-operative screening protocols, was adopted. RESULTS: A total of 231 patients underwent surgery for confirmed or suspected UGI cancer during the RM Partners Cancer Hub, with 213 completed resections and combined 90-day mortality rate of 3.5%. Good short-term survival outcomes were demonstrated with 2-year disease free survival (DFS) and overall survival (OS) for oesophageal (70.8% and 72.9%), gastric (66.7% and 83.3%) and pancreatic cancer resections (68.0% and 88.0%). One patient who developed perioperative COVID-19 during the RM Partners Cancer Hub operation made a full recovery with no lasting clinical sequelae. CONCLUSION: Our experience demonstrates that the RM Partners Cancer Hub approach is a safe strategy for continuing upper gastrointestinal (GI) resectional surgery during future periods of healthcare service disruption.
Asunto(s)
COVID-19 , Procedimientos Quirúrgicos del Sistema Digestivo , Neoplasias , Humanos , Pandemias/prevención & control , Neoplasias/cirugía , Reino UnidoRESUMEN
AIM: Locally advanced intestinal neoplasms including colon cancer may require radical en bloc pancreaticoduodenectomy and right hemicolectomy (PD-RC) to achieve curative, margin-negative resection, but the safety and benefit of this uncommon procedure has not been established. The Association of Coloproctology of Great Britain and Ireland IMPACT initiative has also highlighted a lack of awareness about current services available within the UK for patients with advanced colorectal cancer and concerns about low-volume centres managing complex cases. Thus, we aimed to review the feasibility, safety and long-term outcomes of this procedure at a single high-volume hepatopancreaticobiliary surgery unit in the UK. METHOD: A retrospective cohort study was performed using a database of all consecutive patients with intestinal cancer who had been referred to our regional advanced multidisciplinary team and undergone PD-RC in a 7-year period (2013-2020). Clinico-pathological and outcome data were reviewed. RESULTS: Ten patients (mean age 54 ± 13, 8/10 men) were identified. Final histology revealed the primary tumour sites were colon (n = 7) and duodenum (n = 3). R0 resection was achieved in all cases. The major complication rate (Clavien-Dindo ≥ 3) was 10% (1/10) with no deaths within 90 days of surgery. The Kaplan-Meier estimated 5-year overall survival was 83.3% (95% CI 58.3%-100%). Univariate survival analysis identified perineural invasion and extra-colonic origin as predictors of poor survival (log-rank P < 0.05). CONCLUSION: En bloc PD-RC for locally advanced intestinal cancer can be performed safely with a high proportion of margin-negative resections and resultant long-term survival in carefully selected patients.
Asunto(s)
Neoplasias del Colon , Neoplasias Colorrectales , Masculino , Humanos , Pancreaticoduodenectomía/métodos , Estudios Retrospectivos , Neoplasias del Colon/patología , Neoplasias Colorrectales/cirugía , Colectomía/métodosRESUMEN
BACKGROUND: An increasing number of robotic pancreatoduodenectomies (RPD) are reported, however, questions remain on the number of procedures needed for gaining technical proficiency in RPD. Therefore, we aimed to assess the influence of procedure volume on short-term RPD outcomes and assess the learning curve effect. METHODS: A retrospective review of consecutive RPD cases was undertaken. Non-adjusted cumulative sum (CUSUM) analysis was performed to identify the procedure volume threshold, following which before-threshold and after-threshold outcomes were compared. RESULTS: Since May 2017, 60 patients had undergone an RPD at our institution. The median operative time was 360 min (IQR 302.25-442 min). CUSUM analysis of operative time identified 21 cases as proficiency threshold, indicated by curve inflexion. Median operative time was significantly shorter after the threshold of 21 cases (470 vs 320 min, p < 0.001). No significant difference was found between before- and after-threshold groups in major Clavien-Dindo complications (23.8 vs 25.6%, p = 0.876). CONCLUSIONS: A decrease in operative time after 21 RPD cases suggests a threshold of technical proficiency potentially associated with an initial adjustment to new instrumentation, port placement and standardisation of operative step sequence. RPD can be safely performed by surgeons with prior laparoscopic surgery experience.
Asunto(s)
Laparoscopía , Procedimientos Quirúrgicos Robotizados , Humanos , Estudios de Cohortes , Pancreaticoduodenectomía/métodos , Procedimientos Quirúrgicos Robotizados/métodos , Curva de Aprendizaje , Estudios Retrospectivos , Tempo Operativo , Laparoscopía/métodosRESUMEN
Ionic liquids (ILs) are thought to have negative effects on human health. Researchers have explored the effects of ILs on zebrafish development during the early stages, but the intergenerational toxicity of ILs on zebrafish development has rarely been reported. Herein, parental zebrafish were exposed to different concentrations (0, 12.5, 25, and 50 mg/L) of [Cn mim]NO3 (n = 2, 4, 6) for 1 week. Subsequently, the F1 offspring were cultured in clean water for 96 h. [Cn mim]NO3 (n = 2, 4, 6) exposure inhibited spermatogenesis and oogenesis in F0 adults, even causing obvious lacunae in the testis and atretic follicle oocytes in ovary. After parental exposure to [Cn mim]NO3 (n = 2, 4, 6), the body length and locomotor behavior were measured in F1 larvae at 96 hours post-fertilization (hpf). The results showed that the higher the concentration of [Cn mim]NO3 (n = 2, 4, 6), the shorter the body length and swimming distance, and the longer the immobility time. Besides, a longer alkyl chain length of [Cn mim]NO3 had a more negative effect on body length and locomotor behavior. RNA-seq analysis revealed several downregulated differentially expressed genes (DEGs)-grin1b, prss1, gria3a, and gria4a-enriched in neurodevelopment-related pathways, particularly the pathway for neuroactive ligand-receptor interaction. Moreover, several upregulated DEGs, namely col1a1a, col1a1b, and acta2, were mainly associated with skeletal development. Expression of DEGs was tested by RT-qPCR, and the outcomes were consistent with those obtained from RNA-Seq. We provide evidence showing the effects of parental exposure to ILs on the regulation of nervous and skeletal development in F1 offspring, demonstrating intergenerational effects.
Asunto(s)
Líquidos Iónicos , Contaminantes Químicos del Agua , Animales , Masculino , Femenino , Humanos , Pez Cebra/metabolismo , Líquidos Iónicos/toxicidad , Testículo , Espermatogénesis , Contaminantes Químicos del Agua/toxicidad , Contaminantes Químicos del Agua/metabolismoRESUMEN
Selective hydrogenation with high efficiency under ambient conditions remains a long-standing challenge. Here, a yolk-shell nanostructured catalyst, PdAg@ZIF-8, featuring plasmonic PdAg nanocages encompassed by a metal-organic framework (MOF, namely, ZIF-8) shell, has been rationally fabricated. PdAg@ZIF-8 achieves selective (97.5%) hydrogenation of nitrostyrene to vinylaniline with complete conversion at ambient temperature under visible light irradiation. The photothermal effect of Ag, together with the substrate enrichment effect of the catalyst, improves the Pd activity. The near-field enhancement effect from plasmonic Ag and optimized Pd electronic state by Ag alloying promote selective adsorption of the -NO2 group and therefore catalytic selectivity. Remarkably, the unique yolk-shell nanostructure not only facilitates access to PdAg cores and protects them from aggregation but also benefits substrate enrichment and preferential -NO2 adsorption under light irradiation, the latter two of which surpass the core-shell counterpart, giving rise to enhanced activity, selectivity, and recyclability.
RESUMEN
Resistant starch (RS) has received increased attention due to its potential health benefits. This study was aimed to investigate the effects of dietary corn RS on immunological characteristics of broilers. A total of 320 broiler chicks were randomly allocated to five dietary treatments: normal corn-soyabean (NC) diet group, corn starch diet group, 4 %, 8 % and 12 % RS diet groups. This trial lasted for 42 d. The relative weights of spleen, thymus and bursa, the concentrations of nitric oxide (NO) and IL-4 in plasma at 21 d of age, as well as the activities of total nitric oxide synthase (TNOS) and inducible nitric oxide synthase (iNOS) in plasma at 21 and 42 d of age showed positive linear responses (P < 0·05) to the increasing dietary RS level. Meanwhile, compared with the birds from the NC group at 21 d of age, birds fed 4 % RS, 8 % RS and 12 % RS diets exhibited higher (P < 0·05) relative weight of bursa and concentrations of NO and interferon-γ in plasma. Birds fed 4 % RS and 8 % RS diets showed higher (P < 0·05) number of IgA-producing cells in the jejunum. While compared with birds from the NC group at 42 d of age, birds fed 12 % RS diet showed higher (P < 0·05) relative weight of spleen and activities of TNOS and iNOS in plasma. These findings suggested that dietary corn RS supplementation can improve immune function in broilers.
RESUMEN
Activation of the mechanistic target of rapamycin (mTOR) pathway is frequently found in cancer, but mTOR inhibitors have thus far failed to demonstrate significant antiproliferative efficacy in the majority of cancer types. Besides cancer cell-intrinsic resistance mechanisms, it is conceivable that mTOR inhibitors impact on non-malignant host cells in a manner that ultimately supports resistance of cancer cells. Against this background, we sought to analyze the functional consequences of mTOR inhibition in hepatocytes for the growth of metastatic colon cancer. To this end, we established liver epithelial cell (LEC)-specific knockout (KO) of mTOR (mTORLEC ) mice. We used these mice to characterize the growth of colorectal liver metastases with or without partial hepatectomy to model different clinical settings. Although the LEC-specific loss of mTOR remained without effect on metastasis growth in intact liver, partial liver resection resulted in the formation of larger metastases in mTORLEC mice compared with wildtype controls. This was accompanied by significantly enhanced inflammatory activity in LEC-specific mTOR KO livers after partial liver resection. Analysis of NF-ĸB target gene expression and immunohistochemistry of p65 displayed a significant activation of NF-ĸB in mTORLEC mice, suggesting a functional importance of this pathway for the observed inflammatory phenotype. Taken together, we show an unexpected acceleration of liver metastases upon deletion of mTOR in LECs. Our results support the notion that non-malignant host cells can contribute to resistance against mTOR inhibitors and encourage testing whether anti-inflammatory drugs are able to improve the efficacy of mTOR inhibitors for cancer therapy. © 2021 The Authors. The Journal of Pathology published by John Wiley & Sons, Ltd. on behalf of The Pathological Society of Great Britain and Ireland.
Asunto(s)
Neoplasias del Colon/patología , Hepatocitos/metabolismo , Neoplasias Hepáticas/secundario , Serina-Treonina Quinasas TOR/metabolismo , Animales , Neoplasias Hepáticas/metabolismo , Ratones , Ratones Noqueados , Metástasis de la Neoplasia/patologíaRESUMEN
Pancreatic ductal adenocarcinoma (PDAC) is the most prevalent malignant pancreatic tumor. Few studies have shown how often PDACs arise from cystic precursor lesions. This special report aims to summarize the evidence on the progression of precancerous lesions to PDAC. A review of the literature found four studies that discussed pancreatic intraepithelial lesions (PanINs), three that discussed mucinous cystic neoplasms (MCN) and five that discussed intraductal papillary neoplasms (IPMNs). PanINs were the most common precursors lesion, with approximately 80% of PDACs originating from this lesion. The lack of evidence characterizing the features of PDAC precursor cystic lesions potentially leads to a subset of patients undergoing surgery unnecessarily. Advancements in molecular techniques could allow the study of cystic lesions at a genetic level, leading to more personalized management.
Cancer arising from the ducts within the pancreas is the most common type of pancreatic cancer. Some cancers develop from precancerous changes, but these are not currently well described. Therefore, we have summarized the existing knowledge on the precancerous changes causing pancreatic cancer. We found three main precancerous changes: pancreatic intraepithelial lesions; mucinous cystic neoplasms; and intraductal papillary neoplasms. Pancreatic intraepithelial lesions were the most common pancreatic precancerous lesion, leading to 80% of cancers of the pancreatic ducts. A few studies indicate that patients would benefit from surgery to remove precancerous lesions. We believe that, due to advances in genetic studies, personalized strategies for treating pancreatic cancers will emerge in the future.
Asunto(s)
Carcinoma Ductal Pancreático , Neoplasias Pancreáticas , Lesiones Precancerosas , Carcinoma Ductal Pancreático/diagnóstico , Carcinoma Ductal Pancreático/genética , Carcinoma Ductal Pancreático/patología , Humanos , Páncreas/patología , Neoplasias Pancreáticas/diagnóstico , Neoplasias Pancreáticas/genética , Neoplasias Pancreáticas/patología , Lesiones Precancerosas/diagnóstico , Lesiones Precancerosas/genética , Lesiones Precancerosas/patología , Neoplasias PancreáticasRESUMEN
Bisphenol A (BPA) and 4-nonylphenol (NP) are well-known endocrine-disrupting chemicals (EDCs) that have been proven to affect Leydig cell (LC) functions and testosterone production, but whether BPA and NP have multi- and transgenerational biochemical effects on Leydig cells (LCs) is unknown. Fourier transform infrared (FTIR) spectroscopy is a powerful analytical technique that enables label-free and non-destructive analysis of the tissue specimen. Herein we employed FTIR coupled with chemometrics analysis to identify biomolecular changes in testicular interstitial (Leydig) cells of rats after chronic exposure to low doses of BPA and NP. Cluster segregations between exposed and control groups were observed based on the fingerprint region of 1800-900 cm-1 in all generations. The main biochemical alterations for segregation were amide I, amide II and nucleic acids. BPA and NP single and co-exposure induced significant differences in the ratio of amide I to amide II compared to the corresponding control group in all generations. BPA exposure resulted in remarkable changes of cellular gene transcription and DNA oxidative damage across all generations. Direct exposure to BPA, NP, and BPA&NP of F0 and F1 generations could significantly decrease lipid accumulation in LCs in the F2 and F3 generations. The overall findings revealed that single or co-exposure to BPA and NP at environmental concentrations affects the biochemical structures and properties of LCs.
Asunto(s)
Disruptores Endocrinos , Células Intersticiales del Testículo , Animales , Compuestos de Bencidrilo/toxicidad , Disruptores Endocrinos/toxicidad , Células Intersticiales del Testículo/efectos de los fármacos , Masculino , Fenoles/toxicidad , RatasRESUMEN
BACKGROUND: A body shape index (ABSI) has been proven to be related to a population's CVD incidence. However, the application of this indicator has produced different results. AIM: This study aimed to evaluate the applicability of the ABSI in predicting the incidence of CVD in rural Xinjiang, China, and compare it with waist circumference (WC), waist-to-hip ratio (WHR), waist-to-height ratio (WHtR), and body mass index (BMI). SUBJECTS AND METHODS: 5375 people aged 18 years or older were included in the study. We used the Cox proportional hazard model to evaluate the relationship between WC, WHR, WHtR, BMI, and ABSI and the incidence of CVD, the area under the curve (AUC) to evaluate the predictive power of each anthropometric index for the incidence of CVD, and restricted cubic splines are used to analyse the trend relationship between anthropometric indicators and the incidence of CVD. RESULTS: After multivariate adjustment, standardised WC, WHR, WHtR, BMI, and ABSI all positively correlated with the incidence of CVD. WC had the highest HR (95% CI) value, 1.64 (1.51-1.78), and AUC (95% CI) value, 0.7743 (0.7537-0.7949). ABSI had the lowest HR (95% CI) value, 1.21(1.10-1.32), and AUC (95% CI) value, 0.7419 (0.7208-0.7630). In the sex-specific sensitivity analysis, the predictive ability of traditional anthropometric indicators for the incidence of CVD is higher than that of ABSI. CONCLUSIONS: In the rural areas of Xinjiang, the traditional anthropometric indicators of WC had better ability to predict the incidence of CVD than ABSI.
Asunto(s)
Enfermedades Cardiovasculares , Índice de Masa Corporal , Enfermedades Cardiovasculares/epidemiología , Enfermedades Cardiovasculares/etiología , China/epidemiología , Estudios de Cohortes , Femenino , Humanos , Masculino , Obesidad/epidemiología , Factores de Riesgo , Circunferencia de la Cintura , Relación Cintura-Estatura , Relación Cintura-CaderaRESUMEN
Background: Increasing use of cross-sectional abdominal imaging such as CT colonography (CTC), has resulted in increased identification of incidental pancreatic cystic lesions. Such incidental findings are a cause for anxiety amongst patients and clinicians and can result in increased cost to healthcare delivery resultant from referral to subsequent investigations. Our study explored the prevalence of incidental cystic pancreatic lesions on CTC at a tertiary pancreatic centre, and their management. Methods: A detailed review of CTC reports and patient case notes between 2010-2016 was undertaken. Patients from both screening (National Bowel Cancer Screening) and non-screening cohorts were included in our study. Results: 136 of 4666 patients who underwent CTC had an incidental finding of a pancreatic lesion (2.9%) and 117 confirmed cystic pancreatic lesions (2.5%). Radiological diagnosis of intraductal papillary mucinous neoplasm (IPMN) was available in the CTC report for 71 patients. Twelve patients (0.2%) were found to have pancreatic ductal adenocarcinoma (PDAC) incidentally at CTC, 2 resectable and 10 unresectable with the diagnosis confirmed on biopsy. Follow-up surveillance imaging recommendations were made for 39.3% of patients within one year of the diagnosis of a cystic pancreatic lesion on CTC. One patient with pancreatic duct dilatation of 7mm was lost in follow-up and was found to develop PDAC at 21 months. Conclusions: Pancreatic lesions are increasingly found incidentally on CTC. All patients with pancreatic cystic tumour should be referred to pancreatic multidisciplinary team for discussion to determine management pathway.
Asunto(s)
Carcinoma Ductal Pancreático , Colonografía Tomográfica Computarizada , Quiste Pancreático , Neoplasias Pancreáticas , Estudios Transversales , Estudios de Seguimiento , Humanos , Quiste Pancreático/diagnóstico por imagen , Quiste Pancreático/epidemiología , Neoplasias Pancreáticas/diagnóstico por imagen , Neoplasias Pancreáticas/epidemiología , Resultado del Tratamiento , Neoplasias PancreáticasRESUMEN
Single-atom catalysts (SACs), featuring high atom utilization, have captured widespread interests in diverse applications. However, the single-atom sites in SACs are generally recognized as independent units and the interplay of adjacent sites is largely overlooked. Herein, by the direct pyrolysis of MOFs assembled with Fe and Ni-doped ZnO nanoparticles, a novel Fe1-Ni1-N-C catalyst, with neighboring Fe and Ni single-atom pairs decorated on nitrogen-doped carbon support, has been precisely constructed. Thanks to the synergism of neighboring Fe and Ni single-atom pairs, Fe1-Ni1-N-C presents significantly boosted performances for electrocatalytic reduction of CO2, far surpassing Fe1-N-C and Ni1-N-C with separate Fe or Ni single atoms. Additionally, the Fe1-Ni1-N-C also exhibits superior performance with excellent CO selectivity and durability in Zn-CO2 battery. Theoretical simulations reveal that, in Fe1-Ni1-N-C, single Fe atoms can be highly activated by adjacent single-atom Ni via non-bonding interaction, significantly facilitating the formation of COOH* intermediate and thereby accelerating the overall CO2 reduction. This work supplies a general strategy to construct single-atom catalysts containing multiple metal species and reveals the vital importance of the communitive effect between adjacent single atoms toward improved catalysis.