Gaining More Insights from Synchrotron-Based X-ray Spectroscopy for Alkali Ion Rechargeable Batteries.

Alkali ion rechargeable batteries play a significant part in portable electronic devices and electronic vehicles. The rapid development of renewable energy technology nowadays demands batteries with even higher energy density for grid storage. To fulfill such demand, extensive research efforts have been devoted to optimizing electrochemical properties as well as developing novel energy storage schemes and designing new systems. In the investigation process, synchrotron-based X-ray spectroscopy plays a vital role in investigating the detailed degradation mechanism and developing novel energy storage schemes. Herein, we critically review the applications of synchrotron-based X-ray spectroscopy in battery research in recent years. This review begins with a discussion of the different scientific issues in alkali ion rechargeable batteries within various time and space scales. Subsequently, the principle of synchrotron-based X-ray spectroscopy is introduced, and the characteristics of various characterization techniques are summarized and compared. Typical application cases of synchrotron-based X-ray spectroscopy are then introduced into battery investigations. The final part presents perspectives in the development direction of both alkali ion rechargeable battery systems and synchrotron-based X-ray spectroscopy in the future.

Expandable Li Percolation Network: The Effects of Site Distortion in Cation-Disordered Rock-Salt Cathode Material.

Cation-disordered rock-salt (DRX) materials receive intensive attention as a new class of cathode candidates for high-capacity lithium-ion batteries (LIBs). Unlike traditional layered cathode materials, DRX materials have a three-dimensional (3D) percolation network for Li+ transportation. The disordered structure poses a grand challenge to a thorough understanding of the percolation network due to its multiscale complexity. In this work, we introduce the large supercell modeling for DRX material Li1.16Ti0.37Ni0.37Nb0.10O2 (LTNNO) via the reverse Monte Carlo (RMC) method combined with neutron total scattering. Through a quantitative statistical analysis of the material's local atomic environment, we experimentally verified the existence of short-range ordering (SRO) and uncovered an element-dependent behavior of transition metal (TM) site distortion. A displacement from the original octahedral site for Ti4+ cations is pervasive throughout the DRX lattice. Density functional theory (DFT) calculations revealed that site distortions quantified by the centroid offsets could alter the migration barrier for Li+ diffusion through the tetrahedral channels, which can expand the previously proposed theoretical percolating network of Li. The estimated accessible Li content is highly consistent with the observed charging capacity. The newly developed characterization method here uncovers the expandable nature of the Li percolation network in DRX materials, which may provide valuable guidelines for the design of superior DRX materials.

Unveiling the High-valence Oxygen Degradation Across the Delithiated Cathode Surface.

Charge compensation on anionic redox reaction (ARR) has been promising to realize extra capacity beyond transition metal redox in battery cathodes. The practical development of ARR capacity has been hindered by high-valence oxygen instability, particularly at cathode surfaces. However, the direct probe of surface oxygen behavior has been challenging. Here, the electronic states of surface oxygen are investigated by combining mapping of resonant Auger electronic spectroscopy (mRAS) and ambient pressure X-ray photoelectron spectroscopy (APXPS) on a model LiCoO2 cathode. The mRAS verified that no high-valence oxygen can sustain at cathode surfaces, while APXPS proves that cathode electrolyte interphase (CEI) layer evolves and oxidizes upon oxygen gas contact. This work provides valuable insights into the high-valence oxygen degradation mode across the interface. Oxygen stabilization from surface architecture is proven a prerequisite to the practical development of ARR active cathodes.

Conformal Coating of a High-Voltage Spinel to Stabilize LiCoO2 at 4.6 V.

The ever-growing demand for portable electronic devices has put forward higher requirements on the energy density of layered LiCoO2 (LCO). The unstable surface structure and side reactions with electrolytes at high voltages (>4.5 V) however hinder its practical applications. Here, considering the high-voltage stability and three-dimensional lithium-ion transport channel of the high-voltage Li-containing spinel (M = Ni and Co) LiMxMn2-xO4, we design a conformal and integral LiNixCoyMn2-x-yO4 spinel coating on the surface of LCO via a sol-gel method. The accurate structure of the coating layer is identified to be a spinel solid solution with gradient element distribution, which compactly covers the LCO particle. The coated LCO exhibits significantly improved cycle performance (86% capacity remained after 100 cycles at 0.5C in 3-4.6 V) and rate performance (150 mAh/g at a high rate of 5C). The characterizations of the electrodes from the bulk to surface suggest that the conformal spinel coating acts as a physical barrier to inhibit the side reactions and stabilize the cathode-electrolyte interface (CEI). In addition, the artificially designed spinel coating layer is well preserved on the surface of LCO after prolonged cycling, preventing the formation of an electrochemically inert Co3O4 phase and ensuring fast lithium transport kinetics. This work provides a facile and effective method for solving the surface problems of LCO operated at high voltages.