RESUMEN
The study aimed to investigate heavy metals (HMs) concentrations in human hair based on fish consumption patterns in Qingdao, Xiamen, and Zhoushan. The (HMs) concentrations were determined using acid digestion and an inductively coupled plasma mass spectrometer (ICP-MS, NexION 300X, PerkinElmer). The associated health risks were investigated using risk assessment models described by the United States Environmental Protection Agency (USEPA). The order of fish HMs concentration in Qingdao was Cd
RESUMEN
A compact and sensitive quartz-enhanced photoacoustic spectroscopy (QEPAS) based sensor for carbon monoxide (CO) detection was demonstrated by using a mid-infrared all-fiber structure as well as a 3D-printed acoustic detection module. An all-fiber configuration has advantages of easier optical alignment, lower insertion loss, improvement in system stability, reduction in sensor size and lower cost. The 3D-printed acoustic detection module was introduced to match the mid-infrared all-fiber structure and further decrease the sensor volume, which resulted in a small size of 3.5 cm3 and a weight of 5 grams. A 2.33 µm distributed feedback fiber-coupled diode laser was used as the laser excitation source. A custom quartz tuning fork (QTF) with a small-gap of 200 µm was used as the acoustic wave transducer in order to improve the signal level of the QEPAS sensor. An acoustic micro resonator was utilized as the acoustic wave enhancer. The gas pressure and laser wavelength modulation depth were optimized, respectively. Water vapor was used to accelerate the vibrational-translational relaxation rate of the targeted CO molecule. Finally, a minimum detection limit (MDL) of 4.2 part per million (ppm) was achieved, corresponding to a normalized noise equivalent absorption (NNEA) coefficient of 7.4 × 10-9 cm-1W/âHz. An Allan deviation analysis was used to evaluate the long-term stability of the reported CO-QEPAS sensor system. With an integration time of 150 s, the MDL was improved to be 1.3 ppm.
RESUMEN
Although mercury (Hg) mining activities in the Wanshan area have ceased, mine wastes remain the primary source of Hg pollution in the local environment. To prevent and control Hg pollution, it is crucial to estimate the contribution of Hg contamination from mine wastes. This study aimed to investigate Hg pollution in the mine wastes, river water, air, and paddy fields around the Yanwuping Mine and to quantify the pollution sources using the Hg isotopes approach. The Hg contamination at the study site was still severe, and the total Hg concentrations in the mine wastes ranged from 1.60 to 358 mg/kg. The binary mixing model showed that, concerning the relative contributions of the mine wastes to the river water, dissolved Hg and particulate Hg were 48.6% and 90.5%, respectively. The mine wastes directly contributed 89.3% to the river water Hg contamination, which was the main Hg pollution source in the surface water. The ternary mixing model showed that the contribution was highest from the river water to paddy soil and that the mean contribution was 46.3%. In addition to mine wastes, paddy soil is also impacted by domestic sources, with a boundary of 5.5 km to the river source. This study demonstrated that Hg isotopes can be used as an effective tool for tracing environmental Hg contamination in typical Hg-polluted areas.
RESUMEN
Mine waste (MW) in historical mercury (Hg) mining areas continuously emits Hg into local environment, including aquatic ecosystems. Tracing Hg migration process from MW and determining its relative contribution to Hg pollution is critical for understanding the environmental impact of MW remediation. In this study, we combined data of Hg concentration, speciation, and isotope to address this issue in the Wanshan Hg mining area in southwest China. We found that rainfall can elevate Hg concentrations in river water and control the partitioning and transport of Hg in karst fissure zones through changing the hydrological conditions. A consistently large offset of δ202Hg (1.24) was observed between dissolved Hg (DHg) and particulate Hg (PHg) in surface water during the low-flow period (LFP), which may have been related to the relatively stable hydrologic conditions and unique geological background (karst fissure zones) of the karst region (KR). Results from the ternary Hg isotopic mixing model showed that, despite an order of magnitude reduction in Hg concentration and flux in river water after remediation, the remediated MW is still a significant source of Hg pollution to local aquatic ecosystems, accounting for 49.3 ± 11.9% and 37.8 ± 11.8% of river DHg in high flow period (HFP) and LFP, respectively. This study provides new insights into Hg migration and transportation in aquatic ecosystem and pollution source apportionment in Hg polluted area, which can be used for making polices for future remediation actions.