Assessing the Risk of Metals and Their Mixtures in the Antarctic Nearshore Marine Environment with Diffusive Gradients in Thin-Films.

Robust environmental assessments and contaminant monitoring in Antarctic near-shore marine environments need new techniques to overcome challenges presented by a highly dynamic environment. This study outlines an approach for contaminant monitoring and risk assessment in Antarctic marine conditions using diffusive gradients in thin-films (DGT) coupled to regionally specific ecotoxicology data and environmental quality standards. This is demonstrated in a field study where DGT samplers were deployed in the near-shore marine environment of East Antarctica around the operational Casey station and the abandoned Wilkes station to measure the time-averaged biologically available fraction of metal contaminants. The incorporation of DGT-labile concentrations to reference toxicity mixture models for three Antarctic organisms predicted low toxic effects (<5% effect to the growth or development of each organism). The comparison of metal concentrations to the Australian and New Zealand default water quality guideline values (WQGVs) showed no marine site exceeding the WQGVs for 95% species protection. However, all sites exceeded the 99% WQGVs due to copper concentrations that are likely of geogenic origin (i.e., not from anthropogenic sources). This study provides evidence supporting the use of the DGT technique to monitor contaminants and assess their environmental risk in the near-shore marine environment of Antarctica.

Effect of Various Natural Dissolved Organic Carbon on Copper Lability and Toxicity to the Tropical Freshwater Microalga Chlorella sp.

This study adds further critical information to the limited body of knowledge on the ameliorative ability of Australian dissolved organic carbon (DOC), reinforcing the importance of DOC source and concentration as significant factors controlling the risk copper poses to organisms in freshwater systems. The ameliorative ability of five unstudied DOCs on the chronic toxicity of copper to the tropical alga Chlorella sp. was compared. Sensitivity to copper varied dramatically; effect concentrations at the 50 percent effect level (EC50) increased by up to 22-fold in the high DOC treatment compared to controls and more than 2-fold between DOCs at the same concentration. The analytical techniques, diffusive gradients in thin films (DGT) and Chelex column, were used to understand whether differences in copper toxicity could be explained by copper lability. Labile copper mirrored the trends seen in the toxicity tests; lability decreased with increasing DOC concentration and varied between DOCs at the same concentration. The equilibrium model, WHAM VII, was also used to better understand the role of the free copper ion on the toxicity observed. Disagreement between EC50 values derived using the WHAM-predicted free Cu2+ concentrations and agreement between DGT-labile and the maximum dynamic concentration ( cmaxdyn) suggest free copper is not the sole contributor to toxicity and that the source of the specific DOCs also plays a role.

Assessment of metal concentrations in the SOD1G93A mouse model of amyotrophic lateral sclerosis and its potential role in muscular denervation, with particular focus on muscle tissue.

BACKGROUND: Amyotrophic lateral sclerosis (ALS) is among the most common of the motor neuron diseases, and arguably the most devastating. During the course of this fatal neurodegenerative disorder, motor neurons undergo progressive degeneration. The currently best-understood animal models of ALS are based on the over-expression of mutant isoforms of Cu/Zn superoxide dismutase 1 (SOD1); these indicate that there is a perturbation in metal homeostasis with disease progression. Copper metabolism in particular is affected in the central nervous system (CNS) and muscle tissue. METHODS: This present study assessed previously published and newly gathered concentrations of transition metals (Cu, Zn, Fe and Se) in CNS (brain and spinal cord) and non-CNS (liver, intestine, heart and muscle) tissues from transgenic mice over-expressing the G93A mutant SOD1 isoform (SOD1G93A), transgenic mice over-expressing wildtype SOD1 (SOD1WT) and non-transgenic controls. RESULTS: Cu accumulates in non-CNS tissues at pre-symptomatic stages in SOD1G93A tissues. This accumulation represents a potentially pathological feature that cannot solely be explained by the over-expression of mSOD1. As a result of the lack of Cu uptake into the CNS there may be a deficiency of Cu for the over-expressed mutant SOD1 in these tissues. Elevated Cu concentrations in muscle tissue also preceded the onset of symptoms and were found to be pathological and not be the result of SOD1 over-expression. CONCLUSIONS: It is hypothesized that the observed Cu accumulations may represent a pathologic feature of ALS, which may actively contribute to axonal retraction leading to muscular denervation, and possibly significantly contributing to disease pathology. Therefore, it is proposed that the toxic-gain-of-function and dying-back hypotheses to explain the molecular drivers of ALS may not be separate, individual processes; rather our data suggests that they are parallel processes.

Assessing the chronic toxicity of nickel to a tropical marine gastropod and two crustaceans.

The mining and processing of nickel ores from tropical regions contributes 40% of the global supply. The potential impact of these activities on tropical marine ecosystems is poorly understood. Due to the lack of ecotoxicity data for tropical marine species, there is currently no available water quality guideline value for nickel that is specific to tropical species. In this study, we investigated the toxicity of nickel to three tropical marine invertebrates, the gastropod Nassarius dorsatus, the barnacle Amphibalanus amphitrite, and the copepod Acartia sinjiensis. All toxicity tests used chronic endpoints, namely larval growth, metamorphosis (transition from nauplii to cyprid larvae) and larval development for the snail, barnacle and copepod respectively. Toxicity tests were carried out under environmentally relevant conditions (i.e. 27-30ᵒC, salinity 34-36‰, pH 8.1-8.4). Copper was also tested for quality assurance purposes and to allow for comparisons with previous studies. The copepod was the most sensitive species to nickel, with development inhibited by 10% (EC10) at 5.5 (5.0-6.0) µg Ni/L (95% confidence limits (CL)). Based on EC10 values, the gastropod and barnacle showed similar sensitivities to nickel with growth and metamorphosis inhibited by 10% at 64 (37-91) µg Ni/L and 67 (53-80) µg Ni/L, respectively. Based on existing data available in the literature, the copepod A. sinjiensis is so far the most sensitive tropical marine species to nickel. This study has provided high quality data which will contribute to the development of a water quality guideline value for nickel in tropical marine waters. A species sensitivity distribution of chronic nickel toxicity used the data generated in this paper supplemented by available literature data, comprising 12 species representing 6 taxonomic groups. A 5% hazard concentration (HC5) was determined as 8.2 µg/L Ni.

Inhibition in fertilisation of coral gametes following exposure to nickel and copper.

The mining and production of nickel in tropical regions have the potential to impact on ecologically valuable tropical marine ecosystems. Currently, few data exist to assess the risks of nickel exposure to tropical ecosystems and to derive ecologically relevant water quality guidelines. In particular, data are lacking for keystone species such as scleractinian corals, which create the complex structural reef habitats that support many other marine species. As part of a larger study developing risk assessment tools for nickel in the tropical Asia-Pacific region, we investigated the toxicity of nickel on fertilisation success in three species of scleractinian corals: Acropora aspera, Acropora digitifera and Platygyra daedalea. In the literature, more data are available on the effects of copper on coral fertilisation, so to allow for comparisons with past studies, the toxicity of copper to A. aspera and P. daedalea was also determined. Overall, copper was more toxic than nickel to the fertilisation success of the species tested. Acropora aspera was the most sensitive species to nickel (NOEC < 280µg Ni/L), followed by A. digitifera with an EC10 of 2000µg Ni/L and P. daedalea (EC10 > 4610µg Ni/L). Acropora aspera was also the more sensitive species to copper with an EC10 of 5.8µg Cu/L. The EC10 for P. daedalea was 16µg Cu/L, similar to previous studies. This is the first time that the toxicity of nickel on fertilisation success in Acropora species has been reported, and thus provides valuable data that can contribute to the development of reliable water quality guidelines for nickel in tropical marine waters.

Copper Uptake, Intracellular Localization, and Speciation in Marine Microalgae Measured by Synchrotron Radiation X-ray Fluorescence and Absorption Microspectroscopy.

Metal toxicity to aquatic organisms depends on the speciation of the metal and its binding to the critical receptor site(s) (biotic ligand) of the organism. The intracellular nature of the biotic ligand for Cu in microalgal cells was investigated using the high elemental sensitivity of microprobe synchrotron radiation X-ray fluorescence (SR-XRF) and X-ray absorption near-edge spectroscopy (XANES). The marine microalgae, Ceratoneis closterium, Phaeodactylum tricornutum, and Tetraselmis sp. were selected based on their varying sensitivities to Cu (72-h 50% population growth inhibitions of 8-47 µg Cu/L). Intracellular Cu in control cells was similar for all three species (2.5-3.2 × 10(-15) g Cu/cell) and increased 4-fold in C. closterium and Tetraselmis sp. when exposed to copper, but was unchanged in P. tricornutum (72-h exposure to 19, 40, and 40 µg Cu/L, respectively). Whole cell microprobe SR-XRF identified endogenous Cu in the central compartment (cytoplasm) of control (unexposed) cells. After Cu exposure, Cu was colocated with organelles/granules dense in P, S, Ca, and Si and this was clearly evident in thin sections of Tetraselmis sp. XANES indicated coexistence of Cu(I) and Cu(II) in control and Cu-exposed cells, with the Cu ligand (e.g., phytochelatin) in P. tricornutum different from that in C. closterium and Tetraselmis sp. This study supports the hypothesis that Cu(II) is reduced to Cu(I) and that polyphosphate bodies and phytochelatins play a significant role in the internalization and detoxification of Cu in marine microalgae.

Assessing the Effects of Bioturbation on Metal Bioavailability in Contaminated Sediments by Diffusive Gradients in Thin Films (DGT).

The burrowing and feeding activities of benthic organisms can alter metal speciation in sediments and affect an organisms' exposure to metals. Recently, the performance of the in situ technique of diffusive gradients in thin films (DGT) for predicting metal bioavailability has been investigated in response to the increasing demand of considering contaminant bioavailability in sediment quality assessments. In this study, we test the ability of the DGT technique for predicting the metal bioavailability in clean and contaminated sediments that are being subjected to varying degrees of sediments disturbance: low bioturbation (bivalve Tellina deltoidalis alone) and high bioturbation (bivalve and actively burrowing amphipod, Victoriopisa australiensis). Significant release of DGT-labile Cd, Ni, Pb, and Zn, but lower Cu and Fe, occurred in the pore and overlying waters of sediments exposed to high bioturbation conditions, resulting in higher bioaccumulation of zinc in bivalves. Strong relationships were found between bioaccumulation of Pb and Zn and time-integrated DGT-metal fluxes, whereas poor relationships were obtained using total or dilute-acid extractable metal concentrations. This results demonstrate that DGT is a useful tool for assessing metal bioavailability in sediments and can provide useful predictions of metal bioavailable to benthic organisms in dynamic sediment environments.

Metal Fluxes from Porewaters and Labile Sediment Phases for Predicting Metal Exposure and Bioaccumulation in Benthic Invertebrates.

The use of diffusive gradients in thin films (DGT) for predicting metal bioavailability was investigated by exposing the bivalve Tellina deltoidalis to an identical series of metal-contaminated sediments deployed simultaneously in the field and laboratory. To understand the differences in metal exposure occurring between laboratory- and field-based bioassays, we investigated changes in metal fluxes to DGT probes in sediments and in metal concentrations and partitioning to porewaters and overlying waters. DGT-metal fluxes (Cu, Pb, and Zn) were lower in the overlying waters of most field bioassays compared to the laboratory, causing differences in Pb and Zn bioaccumulation between bivalves exposed to laboratory and field conditions. Overall, DGT-metal fluxes provided predictions of metal bioaccumulation similar to those obtained using dilute-acid extractable metal measurements. This study demonstrates that, irrespective of the physicochemical properties of the sediment and type of exposure (laboratory or field), sediments pose a significant risk of bioaccumulation by T. deltoidalis when the Cu, Pb, and Zn DGT flux exceeds 3.5, 1.3, and 156 µg/h/m(2), respectively. The results presented here support the use of the DGT technique for sediment quality assessment and the hypothesis that DGT-metal fluxes may potentially be useful surrogates for the lability of metals for all exposure routes.

In situ chemical transformations of silver nanoparticles along the water-sediment continuum.

In order to accurately assess the potential environmental risk posed by silver nanoparticles (Ag-NPs), their transformation and fate must be investigated in natural systems. This has proven to be very challenging due to the difficulties encountered in retrieving/analyzing NPs dispersed in complex and heterogeneous environmental matrices at relevant (i.e., low) concentrations. In this study, we overcame this challenge by immobilizing functionalized Ag-NPs onto plasma polymerized solid substrates to form "nano in situ deployment devices" (nIDDs). This method allowed us to retrieve and analyze the Ag-NPs after 48 h of direct exposure in freshwater-sediment and saltwater-sediment environments. The type and extent of Ag-NPs transformation was expected to vary along the water-sediment continuum as sediments typically contain steep gradients in solute concentrations and redox potential. To trace the distribution of redox sensitive elements (e.g., Fe, Mn), Diffusive Equilibration in Thin-films (DET) devices were inserted into the sediments alongside the nIDDs. Chemical transformation of the immobilized Ag-NPs across the water-sediment continuum was investigated after retrieval by synchrotron radiation X-ray Absorption Spectroscopy. Linear combination fitting of Ag K-edge X-ray absorption spectra indicated that the chemical transformations of Ag-NPs in both freshwater and saltwater sediments were strongly affected by the redox conditions over the investigated range. Silver bound to reduced sulfur was the principal product of Ag-NP transformations but different extents of transformation were observed for Ag-NPs exposed to different depths in the sediment. These field results add important insights about the transformation of Ag-NPs in heterogeneous environments.

Diffusive gradients in thin films technique provide robust prediction of metal bioavailability and toxicity in estuarine sediments.

Many sediment quality assessment frameworks incorporate contaminant bioavailability as a critical factor regulating toxicity in aquatic ecosystems. However, current approaches do not always adequately predict metal bioavailability to organisms living in the oxidized sediment surface layers. The deployment of the diffusive gradients in thin films (DGT) probes in sediments allows labile metals present in pore waters and weakly bound to the particulate phase to be assessed in a time-integrated manner in situ. In this study, relationships between DGT-labile metal fluxes within 5 mm of the sediment-water interface and lethal and sublethal effects to the amphipod Melita plumulosa were assessed in a range of contaminated estuarine sediments during 10-day laboratory-based bioassays. To account for differing toxicities of metals, DGT fluxes were normalized to water (WQG) or sediment quality guidelines or toxicity thresholds specific for the amphipod. The better dose-response relationship appeared to be the one based on WQG-normalized DGT fluxes, which successfully predicted toxicity despite the wide range of metals and large variations in sediment properties. The study indicated that the labile fraction of metals measured by DGT is useful for predicting metal toxicity to benthic invertebrates, supporting the applicability of this technique as a rapid monitoring tool for sediments quality assessments.

The use of immobilised metal affinity chromatography (IMAC) to compare expression of copper-binding proteins in control and copper-exposed marine microalgae.

Toxicity of metals to aquatic organisms is dependent on both external factors, such as exposure concentration and water quality parameters, and intracellular processes including specific metal-binding sites and detoxification. Current models used to predict copper toxicity in microalgae do not adequately consider these intracellular processes. This study compared the copper-binding proteins from four species of marine microalgae, Dunaliella tertiolecta, Tetraselmis sp., Phaedactylum tricornutum and Ceratoneis closterium, in controls (no added copper) and following a 72-h exposure to copper (sufficient to inhibit growth by approximately 50%). Cells were lysed by sonication, which was optimised to obtain 54-94% cell rupture for the different algae. Cell lysates were processed by immobilised metal affinity chromatography (IMAC) using Cu(2+) as the bound metal (i.e. Cu-IMAC). Bound proteins were subsequently analysed by SDS-PAGE, comparing proteins recovered from algae that were exposed to copper versus untreated control cells. Individual proteins for which copper exposure resulted in changes to proteins present were excised from gels and further analysed by nano LC ESI-MS/MS; proteins were identified using the Mascot database. Proteins identified in this way included heat-shock proteins, rubisco, α- and ß-tubulins and ATP synthase (ß subunit). The results established that Cu-IMAC is a useful approach to identify proteins involved in copper binding in algae. This study identified several proteins that may play an active role in responses to copper toxicity in marine microalgae.

Slow avoidance response to contaminated sediments elicits sublethal toxicity to benthic invertebrates.

Advanced analytical techniques have identified the heterogeneity of sediments in aquatic environments which may impact the exposure of benthic organisms to contaminants. Acute and chronic toxicity associated with short, intermittent exposure to four field-collected contaminated sediments were assessed for the epi-benthic amphipod Melita plumulosa and the harpacticoid copepod Nitocra spinipes. Increasing the duration of exposure caused a decrease in survival of M. plumulosa and N. spinipes during 10-d bioassays. Increasing the frequency of exposure to a total exposure time >96-h resulted in a significant toxicity to M. plumulosa. Reproduction decreased for both species from exposure to contaminated sediment. For M. plumulosa, reproductive effects occurred for shorter exposures than the time taken to sense and avoid contaminant exposure. Thus, while avoidance behaviors may prevent acute lethality, slow responses may not prevent sublethal effects. Exposure of M. plumulosa to contaminated sediment appeared to cause a physiological change in females which reduced fecundity. This study indicates that sediment toxicity methods which utilize static continuous exposures may overestimate the toxicity that would occur at a field location. However, by preventing organisms from avoiding unfavorable sediments, these methods provide a precautionary assessment of possible effects, which is usually the aim of most assessments frameworks.

The Effects of Nickel and Copper on Tropical Marine and Freshwater Microalgae Using Single and Multispecies Tests.

Microalgae are key components of aquatic food chains and are known to be sensitive to a range of contaminants. Much of the available data on metal toxicity to microalgae have been derived from temperate single-species tests with temperate data used to supplement tropical toxicity data sets to derive guideline values. In the present study, we used single-species and multispecies tests to investigate the toxicity of nickel and copper to tropical freshwater and marine microalgae, including the free-swimming stage of Symbiodinium sp., a worldwide coral endosymbiont. Based on the 10% effect concentration (EC10) for growth rate, copper was two to four times more toxic than nickel to all species tested. The temperate strain of Ceratoneis closterium was eight to 10 times more sensitive to nickel than the two tropical strains. Freshwater Monoraphidium arcuatum was less sensitive to copper and nickel in the multispecies tests compared with the single-species tests (EC10 values increasing from 0.45 to 1.4 µg Cu/L and from 62 to 330 µg Ni/L). The Symbiodinium sp. was sensitive to copper (EC10 of 3.1 µg Cu/L) and less sensitive to nickel (EC50 >1600 µg Ni/L). This is an important contribution of data on the chronic toxicity of nickel to Symbiodinium sp. A key result from the present study was that three microalgal species had EC10 values below the current copper water quality guideline value for 95% species protection in slightly to moderately disturbed systems in Australia and New Zealand, indicating that they may not be adequately protected by the current copper guideline value. By contrast, toxicity of nickel to microalgae is unlikely to occur at exposure concentrations typically found in fresh and marine waters. Environ Toxicol Chem 2023;42:901-913. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Natural organic matter source, concentration, and pH influences the toxicity of zinc to a freshwater microalga.

Zinc is a contaminant of concern in aquatic environments and is a known toxicant to many aquatic organisms. Dissolved organic matter (DOM) is a toxicity modifying factor for zinc and is an important water chemistry parameter. This study investigated the influence of DOM concentration, source, and water pH on the chronic toxicity of zinc to a freshwater microalga, Chlorella sp. The influence of DOM on zinc toxicity was dependent on both concentration and source. In the absence of DOM, the 72-h EC50 was 112 µg Zn.L-1. In the presence of a DOM high in fulvic-like components, zinc toxicity was either slightly decreased (<4-fold increase in EC10s across 15 mg C.L-1 range) or unchanged (minimal difference in EC50s). In the presence of a DOM high in humic-like (aromatic and high molecular weight) components, zinc toxicity was slightly decreased at the EC10 level and strongly increased at the EC50 level. The influence of pH on zinc toxicity was dependent on the source of DOM present in the water. In the presence of DOM high in humic-like components pH did not influence toxicity. In the presence of DOM high in fulvic-like components, pH had a significant effect on EC50 values. Labile zinc (measured by diffusive gradients in thin-films) followed linear relationships with dissolved zinc but could not explain the changes in observed toxicity, with similar DGT-labile zinc relationships shown for the two DOMs despite each DOM influencing toxicity differently. This indicates changes in toxicity may be unrelated to changes in zinc lability. The results suggest that increased toxicity of zinc in the presence of DOM may be due to direct uptake of Zn-DOM complexes. This study highlights the importance of considering DOM source and characteristics when incorporating DOM into water quality guidelines through bioavailability models.

High Sensitivity of the Antarctic Rotifer Adineta editae to Metals and Ecological Relevance in Contaminated Site Risk Assessments.

Anthropogenic activities in Antarctica have led to contamination of terrestrial sites, and soils in ice-free areas have elevated concentrations of metals, particularly around current and historic research stations. Effective management of Antarctic contaminated sites depends on the assessment of risks to a representative range of native terrestrial species. Bdelloid rotifers are an abundant and biodiverse component of Antarctic limnoterrestrial communities and play a key role in nutrient cycling in Antarctic ecosystems. The present study investigates the toxicity of five metals (cadmium, copper, nickel, lead, and zinc) to the endemic bdelloid rotifer Adineta editae, both singly and in metal mixtures. Based on the concentrations tested, zinc was the most toxic metal to survival with a 7-day median lethal concentration (LC50) of 344 µg Zn/L, followed by cadmium with a 7-day LC50 of 1542 µg Cd/L. Rotifers showed high sensitivity using cryptobiosis (chemobiosis) as a sublethal behavioral endpoint. Chemobiosis was triggered in A. editae at low metal concentrations (e.g., 6 µg/L Pb) and is likely a protective mechanism and survival strategy to minimize exposure to stressful conditions. Lead and copper were most toxic to rotifer behavior, with 4-day median effect concentrations (EC50s) of 18 and 27 µg/L, respectively, followed by zinc and cadmium (4-day EC50 values of 52 and 245 µg/L, respectively). The response of rotifers to the metal mixtures was antagonistic, with less toxicity observed than was predicted by the model developed from the single-metal exposure data. The present study provides evidence that this bdelloid rotifer represents a relatively sensitive microinvertebrate species to metals and is recommended for use in contaminant risk assessments in Antarctica. Environ Toxicol Chem 2023;42:1409-1419. © 2023 SETAC.

Development and Validation of Multiple Linear Regression Models for Predicting Chronic Zinc Toxicity to Freshwater Microalgae.

Multiple linear regression (MLR) models were developed for predicting chronic zinc toxicity to a freshwater microalga, Chlorella sp., using three toxicity-modifying factors (TMFs): pH, hardness, and dissolved organic carbon (DOC). The interactive effects between pH and hardness and between pH and DOC were also included. Models were developed at three different effect concentration (EC) levels: EC10, EC20, and EC50. Models were independently validated using six different zinc-spiked Australian natural waters with a range of water chemistries. Stepwise regression found hardness to be an influential TMF in model scenarios and was retained in all final models, while pH, DOC, and interactive terms had variable influence and were only retained in some models. Autovalidation and residual analysis of all models indicated that models generally predicted toxicity and that there was little bias based on individual TMFs. The MLR models, at all effect levels, performed poorly when predicting toxicity in the zinc-spiked natural waters during independent validation, with models consistently overpredicting toxicity. This overprediction may be from another unaccounted for TMF that may be present across all natural waters. Alternatively, this consistent overprediction questions the underlying assumption that models developed from synthetic laboratory test waters can be directly applied to natural water samples. Further research into the suitability of applying synthetic laboratory water-based models to a greater range of natural waters is needed. Environ Toxicol Chem 2023;42:2630-2641. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Applicability of Chronic Multiple Linear Regression Models for Predicting Zinc Toxicity in Australian and New Zealand Freshwaters.

Bioavailability models, for example, multiple linear regressions (MLRs) of water quality parameters, are increasingly being used to develop bioavailability-based water quality criteria for metals. However, models developed for the Northern Hemisphere cannot be adopted for Australia and New Zealand without first validating them against local species and local water chemistry characteristics. We investigated the applicability of zinc chronic bioavailability models to predict toxicity in a range of uncontaminated natural waters in Australia and New Zealand. Water chemistry data were compiled to guide a selection of waters with different zinc toxicity-modifying factors. Predicted toxicities using several bioavailability models were compared with observed chronic toxicities for the green alga Raphidocelis subcapitata and the native cladocerans Ceriodaphnia cf. dubia and Daphnia thomsoni. The most sensitive species to zinc in five New Zealand freshwaters was R. subcapitata (72-h growth rate), with toxicity ameliorated by high dissolved organic carbon (DOC) or low pH, and hardness having a minimal influence. Zinc toxicity to D. thomsoni (reproduction) was ameliorated by both high DOC and hardness in these same waters. No single trophic level-specific effect concentration, 10% (EC10) MLR was the best predictor of chronic toxicity to the cladocerans, and MLRs based on EC10 values both over- and under-predicted zinc toxicity. The EC50 MLRs better predicted toxicities to both the Australian and New Zealand cladocerans to within a factor of 2 of the observed toxicities in most waters. These findings suggest that existing MLRs may be useful for normalizing local ecotoxicity data to derive water quality criteria for Australia and New Zealand. The final choice of models will depend on their predictive ability, level of protection, and ease of use. Environ Toxicol Chem 2023;42:2614-2629. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

DGT-induced copper flux predicts bioaccumulation and toxicity to bivalves in sediments with varying properties.

Many regulatory frameworks for sediment quality assessment include consideration of contaminant bioavailability. However, the "snap-shots" of metal bioavailability provided by analyses of porewaters or acid-volatile sulfide-simultaneously extractable metal (AVS-SEM) relationships do not always contribute sufficient information. The use of inappropriate or inadequate information for assessing metal bioavailability in sediments may result in incorrect assessment decisions. The technique of diffusive gradients in thin films (DGT) enables the in situ measurement of metal concentrations in waters and fluxes from sediment porewaters. We utilized the DGT technique to interpret the bioavailability of copper to the benthic bivalve Tellina deltoidalis in sediments of varying properties contaminated with copper-based antifouling paint particles. For a concentration series of copper-paint contaminated sandy, silty-sand, and silty sediment types, DGT-probes were used to measure copper fluxes to the overlying water, at the sediment-water interface, and in deeper sediments. The overlying water copper concentrations and DGT-Cu fluxes were shown to provide excellent exposure concentration-response relationships in relation to lethal effects occurring to the copper-sensitive benthic bivalve, T. deltoidalis. The study demonstrates the strength of the DGT technique, which we expect will become frequently used for assessing metal bioavailability in sediments.

Investigating arsenic speciation and mobilization in sediments with DGT and DET: a mesocosm evaluation of oxic-anoxic transitions.

Mobilization of arsenic from freshwater and estuarine sediments during the transition from oxic to anoxic conditions was investigated using recently developed diffusive sampling techniques. Arsenic speciation and Fe(II) concentrations were measured at high resolution (1-3 mm) with in situ diffusive gradients in thin films (DGT) and diffusive equilibration in thin films (DET) techniques. Water column anoxia induced Fe(II) and As(III) fluxes from the sediment. A correlation between water column Fe(II) and As(III) concentrations was observed in both freshwater (r(s) = 0.896, p < 0.001) and estuarine (r(s) = 0.557, p < 0.001) mesocosms. Porewater sampling by DGT and DET techniques confirmed that arsenic mobilization was associated with the reductive dissolution of Fe(III) (hydr)oxides in the suboxic zone of the sediment; a relationship that was visible because of the ability to measure the coincident profiles of these species using combined DGT and DET samplers. The selective measurement of As(III) and total inorganic arsenic by separate DGT samplers indicated that As(III) was the primary species mobilized from the solid phase to the porewater. This measurement approach effectively ruled out substantial As(V) mobilization from the freshwater and estuarine sediments in this experiment. This study demonstrates the capabilities of the DGT and DET techniques for investigating arsenic speciation and mobilization over a range of sediment conditions.

Pulse-Exposure Toxicity of Ammonia and Propoxur to the Tropical Copepod Acartia sinjiensis.

Toxicity risk assessments of short-term discharges of contaminated waters to the aquatic environment have shown that receptor organisms can tolerate higher pulse-exposure than continuous-exposure concentrations of some contaminants. However, these observations are influenced by the mode of toxicity of the contaminants present and the concentration-time profile of the exposure. For common metal contaminants, the time-weighted average concentration (TAC) of the exposure has been useful for predicting risk of toxicity to multiple species, including the tropical, euryhaline copepod Acartia sinjiensis. To increase our understanding of the application and limitations of the TAC approach, the present study examined how varied pulse-exposure durations affect the toxicity of fast-acting contaminants, ammonia, and the common pesticide propoxur to this copepod species. Copepod larvae were exposed under continuous-exposure conditions (all life stages from eggs to nauplii to copepodites exposed) and as 6- and 18-h pulse exposures applied during the most sensitive life stage only (24-h-old nauplii) within 78-h tests. Larval development ratio and population size were assessed as test endpoints. Generally, increased exposure duration resulted in increased toxicity. Trends observed for ammonia and propoxur were slightly different for larval development and population size. Larvae tolerated greater concentrations of contaminants in a 6-h pulse (higher 10% effect concentration) than in an 18-h pulse, or a continuous 78-h exposure, whereas toxicity responses converged for the 18- and 78-h exposures. Continuous toxicity thresholds were always protective of pulse exposures, providing a conservative toxicity threshold for all durations of pulse exposures. Although generalizations for predictions of risk based on TACs are frequently effective for common metal contaminants, the TAC approach was not effective for ammonia and propoxur. Environ Toxicol Chem 2022;41:208-218. © 2021 SETAC.