Compensation of color breaking in bi-focal depth-switchable integral floating augmented reality display with a geometrical phase lens.

A bi-focal integral floating system using a geometrical phase (GP) lens can provide switchable integrated spaces with enhanced three-dimensional (3D) augmented reality (AR) depth expression. However, due to the chromatic aberration properties of the GP lens implemented for the switchable depth-floating 3D images, the floated 3D AR images with the red/green/blue (R/G/B) colors are formed at different depth locations with different magnification effects, which causes color breaking. In this paper, we propose a novel technique to resolve the color breaking problem by integrating the R/G/B elemental images with compensated depths and sizes along with experiments to demonstrate the improved results. When we evaluated the color differences of the floated 3D AR images based on CIEDE2000, the experimental results of the depth-switchable integral floating 3D AR images showed that the color accuracies were greatly improved after applying a pre-compensation scheme to the R/G/B sub-images in both concave and convex lens operation modes of the bi-focal switching GP floating lens.

Compact self-interference incoherent digital holographic camera system with real-time operation.

The video recording-capable compact incoherent digital holographic camera system is proposed. The system consists of the linear polarizer, convex lens, geometric phase lens, and the polarized image sensor. The Fresnel hologram is recorded by this simple configuration in real time. The system parameters are analyzed and evaluated to record a better-quality hologram in a compact form-factor. The real-time holographic recording and its digitally reconstructed video playback are demonstrated with the proposed system.

Polarization-dependent liquid crystalline polymeric lens array with aberration-improved aspherical curvature for low 3D crosstalk in 2D/3D switchable mobile multi-view display.

We demonstrated a 2D/3D switchable mobile display using a polarization-dependent switching liquid crystalline polymeric (LCP) lens array film. In spite of short viewing distance and enough viewing window conditions provided by a small f-number lens for mobile displays, the 3D images when switched to the multi-view 3D mode showed a low crosstalk property owing to the improved lens aberration, as applying an aspherical lens curvature interface between the planar-convex LCP layer and the concave-planar isotropic polymer layer. Both 2D and 3D images were demonstrated based on a 5.5-inch quad high definition mobile display panel, where the binocular crosstalk of the 3D mode was 3.3%.

Fast-switching optically isotropic liquid crystal nano-droplets with improved depolarization and Kerr effect by doping high k nanoparticles.

We proposed and analyzed an optically isotropic nano-droplet liquid crystal (LC) doped with high k nanoparticles (NPs), exhibiting enhanced Kerr effects, which could be operated with reduced driving voltages. For enhancing the contrast ratio together with the light efficiencies, the LC droplet sizes were adjusted to be shorter than the wavelength of visible light to reduce depolarization effects by optical scattering of the LC droplets. Based on the optical analysis of the depolarization effects, the influence of the relationship between the LC droplet size and the NP doping ratio on the Kerr effect change was investigated.

Bulk chirality effect for symmetric bistable switching of liquid crystals on topologically self-patterned degenerate anchoring surface.

We demonstrate a bistable switching liquid crystal (LC) mode utilizing a topologically self-structured dual-groove surface for degenerated easy axes of LC anchoring. In our study, the effect of the bulk elastic distortion of the LC directors on the bistable anchoring surface is theoretically analyzed for balanced bistable states based on a free energy diagram. By adjusting bulk LC chirality, we developed ideally symmetric and stable bistable anchoring and switching properties, which can be driven by a low in-plane pulsed field of about 0.7 V/µm. The fabricated device has a contrast ratio of 196:1.

Enhancement of the depth-of-field of integral imaging microscope by using switchable bifocal liquid-crystalline polymer micro lens array.

An integral imaging microscopy (IIM) system with improved depth-of-field (DoF) using a custom-designed bifocal polarization-dependent liquid-crystalline polymer micro lens array (LCP-MLA) is proposed. The implemented MLA has improved electro-optical properties such as a small focal ratio, high fill factor, low driving voltage, and fast switching speed, utilizing a well-aligned reactive mesogen on the imprinted reverse shape of the lens and a polarization switching layer. A bifocal MLA switches its focal length according to the polarization angle and acquires different DoF information of the specimen. After two elemental image arrays are captured, the depth-slices are reconstructed and combined to provide a widened DoF. The fabricated bifocal MLA consists of two identical polarization-dependent LCP-MLAs with 1.6 mm and f/16 focal ratio. Our experimental results confirmed that the proposed system improves the DoF of IIM without the need for mechanical manipulation.

A 3D Optical Surface Profilometer Using a Dual-Frequency Liquid Crystal-Based Dynamic Fringe Pattern Generator.

We propose a liquid crystal (LC)-based 3D optical surface profilometer that can utilize multiple fringe patterns to extract an enhanced 3D surface depth profile. To avoid the optical phase ambiguity and enhance the 3D depth extraction, 16 interference patterns were generated by the LC-based dynamic fringe pattern generator (DFPG) using four-step phase shifting and four-step spatial frequency varying schemes. The DFPG had one common slit with an electrically controllable birefringence (ECB) LC mode and four switching slits with a twisted nematic LC mode. The spatial frequency of the projected fringe pattern could be controlled by selecting one of the switching slits. In addition, moving fringe patterns were obtainable by applying voltages to the ECB LC layer, which varied the phase difference between the common and the selected switching slits. Notably, the DFPG switching time required to project 16 fringe patterns was minimized by utilizing the dual-frequency modulation of the driving waveform to switch the LC layers. We calculated the phase modulation of the DFPG and reconstructed the depth profile of 3D objects using a discrete Fourier transform method and geometric optical parameters.

Dynamic polarization grating based on a dye-doped liquid crystal controllable by a single beam in a homeotropic-planar geometry.

We present a dynamic polarization grating based on a dye-doped liquid crystal cell that is controllable by a single pump beam in a binary homeotropic-planar configuration produced through selective rubbing. Upon single pump beam irradiation, the azo dyes in the liquid-crystal (LC) layer diffuse and adsorb onto the planar LC-anchoring surface due to trans-cis photo-isomerization. It is found that the dynamic polarization grating effect results mainly from the photo-induced easy axis reorientation by the amount of dye molecules adsorbed on the planar LC-alignment surface in a single-beam control scheme. The initial LC-anchoring conditions and the dynamic behavior of the dye adsorption strongly influence the repetitive writing-erasing processes by the single pump beam.

Multi-spatial-frequency and phase-shifting profilometry using a liquid crystal phase modulator.

Optical profilometry is widely applied for measuring the morphology of objects by projecting predetermined patterns on them. In this technique, the compact size is one of the interesting issues for practical applications. The generation of pattern by the interference of coherent light sources has a potential to reduce the dimension of the illumination part. Moreover, this method can make fine patterns without projection optics, and the illumination part is free of restriction from the numerical aperture of the projection optics. In this paper, a phase-shifting profilometry is implemented by using a single liquid crystal (LC) cell. The LC phase modulator is designed to generate the interference patterns with several different spatial frequencies by changing selection of the spacing between the micro-pinholes. We manufactured the LC phase modulator and calibrated it by measuring the phase modulation amount depending on an applied voltage. Our optical profilometry using the single LC cell can generate multi-spatial frequency patterns as well as four steps of the phase-shifted patterns. This method can be implemented compactly, and the reconstructed depth profile is obtained without a phase-unwrapping algorithm.

Optical detection of volatile organic compounds using selective tensile effects of a polymer-coated fiber Bragg grating.

We demonstrated a novel selective chemical sensing approach by incorporating a poly(dimethylsiloxane) (PDMS)-coated fiber Bragg grating (FBG) structure for optically detecting various volatile organic compounds (VOC's). When the proposed structure is exposed to a nonpolar solvent, a tensile stress is induced between the coated PDMS and the optical fiber by a VOC-dependent swelling effect of the PDMS, which results in a Bragg wavelength shift dependent on the concentration and the type of VOC's. Because of no need of an etching process of a fiber cladding, the proposed PDMS-coated FBG can be used as a simple, convenient, and durable chemical sensing element with a high sensitivity, compared with conventional FBG sensors requiring an evanescent wave coupling.

Fast-switching laterally virtual-moving microlens array for enhancing spatial resolution in light-field imaging system without degradation of angular sampling resolution.

We present an electrically controllable fast-switching virtual-moving microlens array (MLA) consisting of a stacked structure of two polarization-dependent microlens arrays (PDMLAs) with optical orthogonality, where the position of the two stacked PDMLAs is shifted by half the elemental pitch in the diagonal direction. By controlling the polarization of the incident light without the physical movement of the molecules comprising the virtual-moving MLA, the periodic sampling position of the MLA can be switched fast using a polarization-switching layer based on a fast-switching liquid crystal cell. Using the fast-switching virtual-moving MLA, the spatial-resolution-enhanced light-field (LF) imaging system was demonstrated without a decrease in the angular sampling resolution as compared to the conventional LF imaging system comprising a passive MLA; two sets of elemental image arrays were captured quickly owing to the short switching time of the virtual-moving MLA of 450 µs. From the two captured sets of the elemental array image, four-times resolution-enhanced reconstruction images of the directional-view and depth-slice images could be obtained.

Transient SHG Imaging on Ultrafast Carrier Dynamics of MoS2 Nanosheets.

Understanding the collaborative behaviors of the excitons and phonons that result from light-matter interactions is important for interpreting and optimizing the underlying fundamental physics at work in devices made from atomically thin materials. In this study, the generation of exciton-coupled phonon vibration from molybdenum disulfide (MoS2 ) nanosheets in a pre-excitonic resonance condition is reported. A strong rise-to-decay profile for the transient second-harmonic generation (TSHG) of the probe pulse is achieved by applying substantial (20%) beam polarization normal to the nanosheet plane, and tuning the wavelength of the pump beam to the absorption of the A-exciton. The time-dependent TSHG signals clearly exhibit acoustic phonon generation at vibration modes below 10 cm-1 (close to the Γ point) after the photoinduced energy is transferred from exciton to phonon in a nonradiative fashion. Interestingly, by observing the TSHG signal oscillation period from MoS2 samples of varying thicknesses, the speed of the supersonic waves generated in the out-of-plane direction (Mach 8.6) is generated. Additionally, TSHG microscopy reveals critical information about the phase and amplitude of the acoustic phonons from different edge chiralities (armchair and zigzag) of the MoS2 monolayers. This suggests that the technique could be used more broadly to study ultrafast physics and chemistry in low-dimensional materials and their hybrids with ultrahigh fidelity.

Evans blue dye-enhanced imaging of the brain microvessels using spectral focusing coherent anti-Stokes Raman scattering microscopy.

We performed dye-enhanced imaging of mouse brain microvessels using spectral focusing coherent anti-Stokes Raman scattering (SF-CARS) microscopy. The resonant signals from C-H stretching in forward CARS usually show high background intensity in tissues, which makes CARS imaging of microvessels difficult. In this study, epi-detection of back-scattered SF-CARS signals showed a negligible background, but the overall intensity of resonant CARS signals was too low to observe the network of brain microvessels. Therefore, Evans blue (EB) dye was used as contrasting agent to enhance the back-scattered SF-CARS signals. Breakdown of brain microvessels by inducing hemorrhage in a mouse was clearly visualized using backward SF-CARS signals, following intravenous injection of EB. The improved visualization of brain microvessels with EB enhanced the sensitivity of SF-CARS, detecting not only the blood vessels themselves but their integrity as well in the brain vasculature.

Coherent Raman Imaging of Live Muscle Sarcomeres Assisted by SFG Microscopy.

In this study, we used spectrally focused coherent anti-Stokes Raman scattering (spCARS) microscopy assisted by sum-frequency generation (SFG) to monitor the variations in the structural morphology and molecular vibrations of a live muscle of Caenorhabditis elegans. The subunits of the muscle sarcomeres, such as the M-line, myosin, dense body, and α-actinin, were alternatively observed using spCARS microscopy for different sample orientations, with the guidance of a myosin positional marker captured by SFG microscopy. Interestingly enough, the beam polarization dependence of the spCARS contrasts for two parallel subunits (dense body and myosin) showed a ~90° phase difference. The chemically sensitive spCARS spectra induced by the time-varying overlap of two pulses allowed (after a robust subtraction of the non-resonant background using a modified Kramers-Krönig transformation method) high-fidelity detection of various genetically modified muscle sarcomeres tuned to the C-H vibration (2800-3100 cm-1). Conversely, SFG image mapping assisted by phase-retrieved spCARS spectra also facilitated label-free monitoring of the changes in the muscle content of C. elegans that are associated with aging, based on the hypothesis that the C-H vibrational modes could serve as qualitative chemical markers sensitive to the amount and/or structural modulation of the muscle.

Overexpression of serum amyloid a 1 induces depressive-like behavior in mice.

Alzheimer's disease (AD) is a neurodegenerative disorder characterized by loss of memory and cognitive abilities. In AD, amyloid ß (Aß) protein aggregates in the brain of patients, forming amyloid plaques. Aß plaques are known to be surrounded by activated microglial cells. Serum amyloid A (SAA) is elevated from several hundred to 1000-fold as part of the immune response against various injuries, including trauma, infection, and inflammation. Additionally, continuous elevation of SAA is related to the development of amyloidosis. This study was designed to identify the relationship between SAA1 and AD using liver specific SAA1 overexpressing mice (TG), because SAA1 is expressed in the liver during the acute phase. We detected exogenous SAA1 expression in the brain of TG mice. This result implies that liver-derived SAA1 migrates to the brain tissues. Thus, we confirmed that the blood brain barrier (BBB) functioned normally using Evans-blue staining and CARS. Furthermore, our results show an increase in the accumulation of the 87kDa form of Aß in TG mice compared to wild type mice (WT). Additionally, the number of microglial cells and levels of pro-inflammatory cytokines were increased. Next, we investigated the relationship between SAA1 and depression by performing social interaction tests. The results showed that TG mice have a tendency to avoid stranger mice and an impaired social recognition. In conclusion, the SAA1 TG mouse model is a valuable model to study depression.