Comparison of achromatic doublet on glass Fresnel lenses for concentrator photovoltaics.

Silicone on glass (SoG) Fresnel lenses are the reference technology in concentrator photovoltaics (CPV) because of their simplicity and low cost. Nevertheless, their performance is strongly limited by chromatic aberration. As an alternative, in order to overcome such limitation, achromatic doublet on glass (ADG) Fresnel lenses were proposed. Such lenses are achromatic cemented doublet specifically designed for CPV applications. In this paper, a novel ADG architecture is presented and its performance analyzed and compared to previous proposals. The results show that most of the intrinsic optical losses are minimized and a superior optical efficiency can be achieved. The novel ADG design provides an achromatic lens for CPV whose efficiency is almost equal to the reference SoG technology and, at the same time, maintains all the advantages provided by the achromatic design such as the higher maximum attainable concentration and the strongly reduced temperature dependency.

Roll-to-roll nanoimprint lithography of high efficiency Fresnel lenses for micro-concentrator photovoltaics.

Roll-to-roll nanoimprint lithography (R2R-NIL) is an enabling technology for the low-cost mass production of high-quality micro- and nano-sized optical elements. Particularly, the fabrication of Fresnel lenses using R2R-NIL is a promising approach to produce optical arrays for micro-concentrator photovoltaic modules. This work investigates the application of a continuous R2R imprinting process based on ultraviolet curing of transparent photopolymer resins (UV-NIL) to fabricate high-efficiency and low-cost Fresnel lenses. The morphological attributes and the related optical performance of the lenses fabricated using roll-to-roll UV-NIL on flexible PET sheets yielded optical efficiency values up to ∼ 69% at a concentration ratio of 178X, whereas a value of ∼ 77% was obtained for the UV-NIL batch processed on a flat rigid substrate. Further improvement of the optical efficiency has been achieved by adding moth-eye inspired antireflective (AR) features on the side opposite to the Fresnel motifs via a double-sided R2R UV-NIL process. The process developed paves the way for cost-effective mass production of high-efficiency Fresnel lenses for micro-concentrator photovoltaics.