New Zealand Dairy Farming: Milking Our Environment for All Its Worth.

Over the past two decades there have been major increases in dairy production in New Zealand. This increase in intensity has required increased use of external inputs, in particular fertilizer, feed, and water. Intensified dairy farming thus incurs considerable environmental externalities: impacts that are not paid for directly by the dairy farmer. These externalities are left for the wider New Zealand populace to deal with, both economically and environmentally. This is counter-intuitive given the dairy industry itself relies on a 'clean green' image to maximize returns. This is the first nationwide assessment of some of the environmental costs of the recent increase of dairy intensification in New Zealand. Significant costs arise from nitrate contamination of drinking water, nutrient pollution to lakes, soil compaction, and greenhouse gas emissions. At the higher end, the estimated cost of some environmental externalities surpasses the 2012 dairy export revenue of NZ$11.6 billion and almost reaches the combined export revenue and dairy's contribution to Gross Domestic Product in 2010 of NZ$5 billion. For the dairy industry to accurately report on its profitability and maintain its sustainable marketing label, these external costs should be reported. This assessment is in fact extremely conservative as many impacts have not been valued, thus, the total negative external impact of intensified dairying is probably grossly underestimated.

Composite environmental indices-a case of rickety rankings.

Composite indices have been widely used to rank the environmental performance of nations. Such environmental indices can be useful in communicating complex information as a single value and have the potential to generate political and media awareness of environmental issues. However, poorly constructed, or poorly communicated indices, can hinder efforts to identify environmental failings, and there are considerable differences in rank among existing environmental indices. Here, we provide a review of the conceptual frameworks and methodological choices used for existing environmental indices to enhance our understanding of their accuracy and applicability. In the present study, we review existing global indices according to their conceptual framework (objectives of the index and set of indicators included) and methodological choices made in their construction (e.g., weighting and aggregation). We examine how differences in conceptual frameworks and methodology may yield a more, or less, optimistic view of a country's environment. Our results indicate that (1) multidimensional environmental indices with indicators related to human health and welfare or policy are positively correlated; (2) environment-only indices are positively correlated with one another or are not correlated at all; (3) multidimensional indices and environment-only indices are negatively correlated with each other or are not correlated at all. This indicates that the conceptual frameworks and indicators included may influence a country's rank among different environmental indices. Our results highlight that, when choosing an existing environmental index-or developing a new one-it is important to assess whether the conceptual framework (and associated indicators) and methodological choices are appropriate for the phenomenon being measured and reported on. This is important because the inclusion of confounding indicators in environmental indices may provide a misleading view of the quality of a country's environment.

World scientists' warning: The behavioural crisis driving ecological overshoot.

Previously, anthropogenic ecological overshoot has been identified as a fundamental cause of the myriad symptoms we see around the globe today from biodiversity loss and ocean acidification to the disturbing rise in novel entities and climate change. In the present paper, we have examined this more deeply, and explore the behavioural drivers of overshoot, providing evidence that overshoot is itself a symptom of a deeper, more subversive modern crisis of human behaviour. We work to name and frame this crisis as 'the Human Behavioural Crisis' and propose the crisis be recognised globally as a critical intervention point for tackling ecological overshoot. We demonstrate how current interventions are largely physical, resource intensive, slow-moving and focused on addressing the symptoms of ecological overshoot (such as climate change) rather than the distal cause (maladaptive behaviours). We argue that even in the best-case scenarios, symptom-level interventions are unlikely to avoid catastrophe or achieve more than ephemeral progress. We explore three drivers of the behavioural crisis in depth: economic growth; marketing; and pronatalism. These three drivers directly impact the three 'levers' of overshoot: consumption, waste and population. We demonstrate how the maladaptive behaviours of overshoot stemming from these three drivers have been catalysed and perpetuated by the intentional exploitation of previously adaptive human impulses. In the final sections of this paper, we propose an interdisciplinary emergency response to the behavioural crisis by, amongst other things, the shifting of social norms relating to reproduction, consumption and waste. We seek to highlight a critical disconnect that is an ongoing societal gulf in communication between those that know such as scientists working within limits to growth, and those members of the citizenry, largely influenced by social scientists and industry, that must act.

Nutrient criteria to achieve New Zealand's riverine macroinvertebrate targets.

Waterways worldwide are experiencing nutrient enrichment from population growth and intensive agriculture, and New Zealand is part of this global trend. Increasing fertilizer in New Zealand and intensive agriculture have driven substantial water quality declines over recent decades. A recent national directive has set environmental managers a range of riverine ecological targets, including three macroinvertebrate indicators, and requires nutrient criteria be set to support their achievement. To support these national aspirations, we use the minimization-of-mismatch analysis to derive potential nutrient criteria. Given that nutrient and macroinvertebrate monitoring often does not occur at the same sites, we compared nutrient criteria derived at sites where macroinvertebrates and nutrients are monitored concurrently with nutrient criteria derived at all macroinvertebrate monitoring sites and using modelled nutrients. To support all three macroinvertebrate targets, we suggest that suitable nutrient criteria would set median dissolved inorganic nitrogen concentrations at ~0.6 mg/L and median dissolved reactive phosphorus concentrations at ~0.02 mg/L. We recognize that deriving site-specific nutrient criteria requires the balancing of multiple values and consideration of multiple targets, and anticipate that criteria derived here will help and support these environmental goals.

A rapid method to score stream reaches based on the overall performance of their main ecological functions.

A method was developed to score the ecological condition of first- to third-order stream reaches in the Auckland region of New Zealand based on the performance of their key ecological functions. Such a method is required by consultants and resource managers to quantify the reduction in ecological condition of a modified stream reach relative to its unmodified state. This is a fundamental precursor for the determination of fair environmental compensation for achieving no-net-loss in overall stream ecological value. Field testing and subsequent use of the method indicated that it provides a useful measure of ecological condition related to the performance of stream ecological functions. It is relatively simple to apply compared to a full ecological study, is quick to use, and allows identification of the degree of impairment of each of the key ecological functions. The scoring system was designed so that future improvements in the measurement of stream functions can be incorporated into it. Although the methodology was specifically designed for Auckland streams, the principles can be readily adapted to other regions and stream types.

The Impact of Anisotropy on the Accuracy of Conductivity Imaging: A Quantitative Validation Study.

We present a quantitative validation study to assess the accuracy of low-frequency conductivity imaging methods, based on a testing current measured using Current Density Imaging (CDI). We tested the proposed procedure to study the influence of tissue anisotropy on the accuracy of conductivity reconstruction methods, using a finite element model of anisotropic brain tissue. Simulations were carried out for three different levels of tissue anisotropy to compare the results obtained by our recently developed anisotropic conductivity method with those obtained by our well-established conductivity method that assumes isotropic conductivity. The validation results clearly show that the conductivity imaging method which takes into account tissue anisotropy yields significantly superior accuracy.

Rediscovering the species in community-wide predictive modeling.

Broadening the scope of conservation efforts to protect entire communities provides several advantages over the current species-specific focus, yet ecologists have been hampered by the fact that predictive modeling of multiple species is not directly amenable to traditional statistical approaches. Perhaps the greatest hurdle in community-wide modeling is that communities are composed of both co-occurring groups of species and species arranged independently along environmental gradients. Therefore, commonly used "short-cut" methods such as the modeling of so-called "assemblage types" are problematic. Our study demonstrates the utility of a multiresponse artificial neural network (MANN) to model entire community membership in an integrative yet species-specific manner. We compare MANN to two traditional approaches used to predict community composition: (1) a species-by-species approach using logistic regression analysis (LOG) and (2) a "classification-then-modeling" approach in which sites are classified into assemblage "types" (here we used two-way indicator species analysis and multiple discriminant analysis [MDA]). For freshwater fish assemblages of the North Island, New Zealand, we found that the MANN outperformed all other methods for predicting community composition based on multiscaled descriptors of the environment. The simple-matching coefficient comparing predicted and actual species composition was, on average, greatest for the MANN (91%), followed by MDA (85%), and LOG (83%). Mean Jaccard's similarity (emphasizing model performance for predicting species' presence) for the MANN (66%) exceeded both LOG (47%) and MDA (46%). The MANN also correctly predicted community composition (i.e., a significant proportion of the species membership based on a randomization procedure) for 82% of the study sites compared to 54% (MDA) and 49% (LOG), resulting in the MANN correctly predicting community composition in a total of 311 sites and an additional 117 sites (n = 379), on average, compared to LOG and MDA. The MANN also provided valuable explanatory power by simultaneously quantifying the nature of the relationships between the environment and both individual species and the entire community (composition and richness), which is not readily available from traditional approaches. We discuss how the MANN approach provides a powerful quantitative tool for conservation planning and highlight its potential for biomonitoring programs that currently depend on modeling discrete assemblage types to assess aquatic ecosystem health.

Current density imaging and electrically induced skin burns under surface electrodes.

The origin of electrical burns under gel-type surface electrodes is a controversial topic that is not well understood. To investigate the phenomenon, we have developed an excised porcine skin-gel model, and used low-frequency current density imaging (LFCDI) to determine the current density (CD) distribution through the skin before and after burns were induced by application of electrical current (200 Hz, 70% duty cycle, 20-35 mA monophasic square waveform applied to the electrodes for 30-135 min). The regions of increased CD correlate well with the gross morphological changes (burns) observed. The measurement is sensitive enough to show regions of high current densities in the pre-burn skin, that correlate with areas were burn welts were produced, thus predicting areas where burns are likely to occur. Statistics performed on 28 skin patches revealed a charge dependency of the burn areas and a relatively uniform distribution. The results do not support a thermal origin of the burns but rather electro-chemical mechanisms. We found a statistically significant difference between burn area coverage during anodic and cathodic experiments.

Measurement of thoracic current flow in pigs for the study of defibrillation and cardioversion.

Although defibrillation has been in clinical use for more than 50 years, the complete current flow distribution inside the body during a defibrillation procedure has never been directly measured. This is due to the lack of appropriate imaging technology to noninvasively monitor the current flow inside the body. The current density imaging (CDI) technique, using a magnetic resonance (MR) imager, provides a new approach to this problem [Scott et al. (1991)]. CDI measures the local magnetic field generated by the current and calculates the current density by computing its curl. In this study, CDI was used to measure current density at all points within a postmortem pig torso during an electrical current application through defibrillation electrodes. Furthermore, current flow information was visualized along the chest wall and within the chest cavity using streamline analysis. As expected, some of the highest current densities were observed in the chest wall. However, current density distribution varied significantly from one region to another, possibly reflecting underlying heterogeneous tissue conductivity and anisotropy. Moreover, the current flow analysis revealed many complex and unexpected current flow patterns that have never been observed before. This study has, for the first time, noninvasively measured the volume current measurement inside the pig torso.

Experimental implementation of a new method of imaging anisotropic electric conductivities.

This paper presents the first experiment of imaging anisotropic impedance using a novel technique called Diffusion Tensor Current Density Impedance Imaging (DTCD-II). A biological anisotropic tissue phantom was constructed and an experimental implementation of the new method was performed. The results show that DT-CD-II is an effective way of non-invasively measuring anisotropic conductivity in biological media. The cross-property factor between the diffusion tensor and the conductivity tensor has been carefully determined from the experimental data, and shown to be spatially inhomogeneous. The results show that this novel imaging approach has the potential to provide valuable new information on tissue properties.

Radio-frequency current density imaging based on a 180 (°) sample rotation with feasibility study of full current density vector reconstruction.

Radio-frequency current density imaging (RF-CDI) is a technique that noninvasively measures current density distributions at the Larmor frequency utilizing magnetic resonance imaging. Previously implemented RF-CDI methods reconstruct the applied current density component J(z) along the static magnetic field of the imager [(B)\vec](0) (the z direction) based on the assumption that the z-directional change of the magnetic field component H(z) can be ignored compared to J(z). However, this condition may be easily violated in biomedical applications. We propose a new reconstruction method for RF-CDI, which does not rely on the aforementioned assumption. Instead, the sample is rotated by 180 (°) in the horizontal plane to collect magnetic resonance data from two opposite positions. Using simulations and experiments, we have verified that this approach can fully recover one component of current density. Furthermore, this approach can be extended to measure three dimensional current density vectors by one additional sample orientation in the horizontal plane. We have therefore demonstrated for the first time the feasibility of imaging the magnitude and phase of all components of a radio-frequency current density vector field.

Polar decomposition radio-frequency current density imaging.

Polar Decomposition Radio-frequency Current Density Imaging (PD-RFCDI) is an imaging technique that non-invasively measures RF current density components inside a sample using MRI. Previous PD-RFCDI implementations suffer from the strict constraint on the amount of applied current as well as severe interference from the unwanted induced current. This work proposes solutions to both problems which successfully remove the current constraints of PD-RFCDI. Both simulation and experiment were used to verify the validity of PD-RFCDI on a clinical MRI scanner.

Electrical conductivity imaging using MRI measurement of the magnetic field vector.

Current density and electrical conductivity imaging research at the University of Toronto is reviewed. Methods for imaging live animals at low frequency are described and contrasted with EIT and other MRI based techniques. New work on imaging at radio frequencies is presented and future work directions are discussed. It is concluded that low frequency methods are mature and ready for application in small animals and that radio frequency methods will soon have application in small animals.

Multislice radio-frequency current density imaging.

Radio-frequency current density imaging (RF-CDI) is an imaging technique that noninvasively measures current density distribution at the Larmor frequency utilizing magnetic resonance imaging (MRI). Previously implemented RF-CDI techniques were only able to image a single slice transverse to the static magnetic field B(0) . This paper describes the first realization of a multislice RF-CDI sequence on a 1.5 T clinical imager. Multislice RF current density images have been reconstructed for two phantoms. The influence of MRI random noise on the sensitivity of the multislice RF-CDI measurement has also been studied by theoretical analysis, simulation and phantom experiments.

In-vivo measurement of relationship between applied current amplitude and current density magnitude from 10 mA to 110 mA.

Current density imaging (CDI) is a magnetic resonance imaging (MRI) technique used to quantitatively measure current density vectors throughout the volume of an object/subject placed in the MRI system. Electrical current pulses are applied externally to the object/subject and are synchronized with the MRI sequence. In this work, CDI is used to measure average current density magnitude in the torso region of an in-vivo piglet for applied current pulse amplitudes ranging from 10 mA to 110 mA. The relationship between applied current amplitude and current density magnitude is linear in simple electronic elements such as wires and resistors; however, this relationship may not be linear in living tissue. An understanding of this relationship is useful for research in defibrillation, human electro-muscular incapacitation (e.g. TASER(R)) and other bioelectric stimulation devices. This work will show that the current amplitude to current density magnitude relationship is slightly nonlinear in living tissue in the range of 10 mA to 110 mA.

Measurement of current density vectors in a live pig for the study of human electro-muscular incapacitation devices.

Current density imaging (CDI) is an MRI technique used to quantitatively measure current density vectors in biological tissue. A CDI sequence and corresponding experimental method were developed for the study of human electro-muscular incapacitation (HEMI) devices using an animal model. Measurements of current density vectors were performed in piglets weighing 4 to 5 kg. Pathways of current density vectors in the region of the chest and heart were investigated using vector plotting and streamline integration methods. Measurement of current density vectors were also used to analyze the relationship between applied current amplitude and measured current density magnitude in the range of 10 mA to 45 mA of applied current.

Current density impedance imaging.

Current density impedance imaging (CDII) is a new impedance imaging technique that can noninvasively measure the conductivity distribution inside a medium. It utilizes current density vector measurements which can be made using a magnetic resonance imager (MRI) (Scott , 1991). CDII is based on a simple mathematical expression for inverted Delta sigma / sigma = inverted Delta ln sigma, the gradient of the logarithm of the conductivity sigma, at each point in a region where two current density vectors J1 and J2 have been measured and J1 x J2 not equal 0. From the calculated inverted Delta ln sigma and a priori knowledge of the conductivity at the boundary, the logarithm of the conductivity ln sigma is integrated by two different methods to produce an image of the conductivity sigma in the region of interest. The CDII technique was tested on three different conductivity phantoms. Much emphasis has been placed on the experimental validation of CDII results against direct bench measurements by commercial LCR meters before and after CDII was performed.

Gradient distortion correction for low frequency current density imaging.

Current density imaging (CDI) is a technique that uses magnetic resonance imaging (MRI) to measure the distribution of externally applied electric current inside tissues. However, GDI processing is rendered inaccurate by the distortion caused by the nonlinearity of MRI gradient fields. The distortion interferes with the proper registration and the curl operation required for correct computation of current density vectors. To address this problem, a calibration phantom was imaged to determine the distortion and to generate calibration maps to correct the distorted current density images. A validation experiment involving a cylindrical phantom was performed to verify this method. Comparison of the distorted and corrected images reveals that both the registration and the curl operation are successfully corrected by this method.

Noise analysis for multi-slice radio frequency current density imaging.

Radio frequency current density imaging (RF-CDI) is an imaging technique that measures current density distribution at the Larmor frequency utilizing magnetic resonance imaging (MRI). The multi-slice RF-CDI sequence has extended the ability of RF-CDI to image multiple slices and thus has enhanced its capacity for biomedical applications. In this paper, the influence of MRI random noise on the sensitivity of multi-slice RF-CDI measurement is studied. The formula of current noise is derived, which is verified by both simulation and phantom experiments. A 3-D finite-difference time-domain (FDTD) model is employed to compute the electromagnetic fields in the simulation.

Comparison of current densities measured in a pig heart during states of ventricular fibrillation and post-mortem for different defibrillation electrode positions.

Current density imaging (CDI) is an MRI technique used to quantitatively measure current density vectors in biological tissue. A fast CDI sequence was developed that can image the whole body of a 4 kg pig in about 15 minutes. A state of ventricular fibrillation (VF) can be sustained for nearly 30 minutes allowing two complete CDI scans of the same subject. A single parameter, i.e. electrode position, is adjusted between the two scans for comparative analysis. This study compares the current density vector directions and current density magnitudes measured for two typical electrode positions, i.e. apex anterior (AA) and apex posterior (AP). The comparative experiment is repeated on the same subjects for states of immediate post-mortem and one hour post-mortem. Further, the acquired vector datasets are used to compute conductivity images of the heart.