Non-Invasive Alcohol Concentration Measurement Using a Spectroscopic Module: Outlook for the Development of a Drunk Driving Prevention System.

Alcohol acts as a central nervous system depressant and falls under the category of psychoactive drugs. It has the potential to impair vital bodily functions, including cognitive alertness, muscle coordination, and induce fatigue. Taking the wheel after consuming alcohol can lead to delayed responses in emergency situations and increases the likelihood of collisions with obstacles or suddenly appearing objects. Statistically, drivers under the influence of alcohol are seven times more likely to cause accidents compared to sober individuals. Various techniques and methods for alcohol measurement have been developed. The widely used breathalyzer, which requires direct contact with the mouth, raises concerns about hygiene. Methods like chromatography require skilled examiners, while semiconductor sensors exhibit instability in sensitivity over measurement time and has a short lifespan, posing structural challenges. Non-dispersive infrared analyzers face structural limitations, and in-vehicle air detection methods are susceptible to external influences, necessitating periodic calibration. Despite existing research and technologies, there remain several limitations, including sensitivity to external factors such as temperature, humidity, hygiene consideration, and the requirement for periodic calibration. Hence, there is a demand for a novel technology that can address these shortcomings. This study delved into the near-infrared wavelength range to investigate optimal wavelengths for non-invasively measuring blood alcohol concentration. Furthermore, we conducted an analysis of the optical characteristics of biological substances, integrated these data into a mathematical model, and demonstrated that alcohol concentration can be accurately sensed using the first-order modeling equation at the optimal wavelength. The goal is to minimize user infection and hygiene issues through a non-destructive and non-invasive method, while applying a compact spectrometer sensor suitable for button-type ignition devices in vehicles. Anticipated applications of this study encompass diverse industrial sectors, including the development of non-invasive ignition button-based alcohol prevention systems, surgeon's alcohol consumption status in the operating room, screening heavy equipment operators for alcohol use, and detecting alcohol use in close proximity to hazardous machinery within factories.

Development of a simple pressure and heat stimulator for intra- and interdigit functional magnetic resonance imaging.

For this study, we developed a simple pressure and heat stimulator that can quantitatively control pressure and provide heat stimulation to intra- and interdigit areas. The developed stimulator consists of a control unit, drive units, and tactors. The control unit controls the stimulation parameters, such as stimulation types, intensity, time, and channel, and transmits a created signal of stimulation to the drive units. The drive units operate pressure and heat tactors in response to commands from the control unit. The pressure and heat tactors can display various stimulation intensities quantitatively, apply stimulation continuously, and adjust the stimulation areas. Additionally, they can easily be attached to and detached from the digits. The developed pressure and heat stimulator is small in total size, easy to install, and inexpensive to manufacture. The new stimulator operated stably in a magnetic resonance imaging (MRI) environment without affecting the obtained images. A preliminary functional magnetic resonance imaging (fMRI) experiment confirmed that differences in activation of somatosensory areas were induced from the pressure and heat stimulation. The developed pressure and heat stimulator is expected to be utilized for future intra- and interdigit fMRI studies on pressure and heat stimulation.

Development of a simple MR-compatible vibrotactile stimulator using a planar-coil-type actuator.

For this study, we developed a magnetic resonance (MR)-compatible vibrotactile stimulator using a planar-coil-type actuator. The newly developed vibrotactile stimulator consists of three units: control unit, drive unit, and planar-coil-type actuator. The control unit controls frequency, intensity, time, and channel, and transfers the stimulation signals to the drive unit. The drive unit operates the planar-coil-type actuator in response to commands from the control unit. The planar-coil-type actuator, which uses a planar coil instead of conventional electric wire, generates vibrating stimulation through interaction of the current of the planar coil with the static magnetic field of the MR scanner. Even though the developed tactile stimulating system is small, simple, and inexpensive, it has a wide range of stimulation frequencies (20 ~ 400 Hz, at 40 levels) and stimulation intensities (0 ~ 7 V, at 256 levels). The stimulation intensity does not change due to frequency changes. Since the transient response time is a few microseconds, the stimulation time can be controlled on a scale of microseconds. In addition, this actuator has the advantages of providing highly repeatable stimulation, being durable, being able to assume various shapes, and having an adjustable contact area with the skin. The new stimulator operated stably in an MR environment without affecting the MR images. Using functional magnetic resonance imaging, we observed the brain activation changes resulting from stimulation frequency and intensity changes.

Driving performance changes of middle-aged experienced taxi drivers due to distraction tasks during unexpected situations.

This study investigated the effects of distraction taskssuch as sending a text message with a cellphone and searching navigation with car navigation system-on the driving performance of 29 highly experienced taxi drivers in their 50s. All participants were instructed to drive using a driving simulator for 2 min. while maintaining a constant distance from the vehicle in front and a constant speed. Participants drove without any distractions for the first minute. For an additional minute, they performed Driving Only or performed a task while driving (Driving + Sending Text Message or Driving + Searching Navigation). An unexpected situation, in which the participant had to stop abruptly due to a sudden stop of the preceding vehicle, occurred during this period. Driving performance during the unexpected situation was evaluated by car control variables, medial-lateral coefficient of variation and brake time, and by motion variables such as the jerk-cost function. Compared to Driving Only, jerk-cost function, medial-lateral coefficient of variation, and brake time increased during Driving + Sending Text Message or Driving + Searching Navigation.

A study on orbital volume of Korean people in their 20s or 40s.

AIMS: To measure the orbital volume of normal Korean people in two different age groups (subjects were in their 20s or 40s), and analyze the differences of orbital volume with respect to age and gender. In addition, to analyze correlation between body parameters (height and weight) and the orbital volume. METHODS: Magnetic resonance imaging (MRI) data were acquired for a total of 143 subjects, consisting of 71 subjects in their 20s (32 males and 39 females) and 72 subjects in their 40s (30 males and 42 females). Two-way ANOVA was used to analyze how orbital volume changes with respect to gender and age. A multiple regression analysis was performed to investigate the correlation between body parameters and the orbital volume. RESULTS: The orbital volume of subjects in their 20s was larger than that of subjects in their 40s, and the volume was larger in men than in women. As age increased, the decrease in the orbital volume of women was greater than that of men. While weight and height showed positive correlations with orbital volume in male and female subjects in their 20s, respectively, weight showed a positive correlation with orbital volume in male and female subjects in their 40s. CONCLUSIONS: These results provide basic information about the effect of age, gender, and body parameters on orbital volume of Korean people in their 20s or 40s.

An analysis of the correlation between young males' personal aggression and their skin conductance levels during exposure to aggression images.

This study investigated the correlation between young males' personal aggression and their skin conductance level (SCL) when watching aggression images. SCL increased when participants viewed aggression images as compared to control images. There was a negative correlation between personal aggression score and degree of change in SCL between aggression and control images.

Prioritizing problem features in Korean patients with senile dementia for implementation of monitoring technologies.

The purpose of this study was to investigate the central problem features of Korean patients with senile dementia and to prioritize the features according to risk to the patient with a view to the implementation of remote monitoring technologies. Twenty central problem features were extracted using factorial analysis. The frequency of violent language and confabulation, gathering, and repetition was significantly greater in female than in male patients with senile dementia. All central features, with the exception of abnormal sexual behavior and audiovisual deficits, differed in frequency between the normal elderly and the senile dementia patients and between patients with dementias of different severity. Judgment disorder was the greatest differentiating factor between the normal elderly and the patients with senile dementia. For dementia severity, memory disorder was the greatest differentiating factor of severe versus mild dementia. When risk to the patient was analyzed, problems of perception were identified as the problem features of highest priority.

Cerebral lateralization index based on intensity of bold signal of FMRI.

This study proposes a new cerebral lateralization index (LI) on the basis of neural activation intensity. Eight right-handed male college students (mean age 23.5 years) and 10 right-handed male college students (the mean age 25.1 years) participated in this study of visuospatial and verbal tasks, respectively. Functional brain images were taken from 3T MRI using the single-shot EPI method. A cerebral LI based on neural activation area (i.e., number of activated voxels) and another based on neural activation intensity (i.e., intensity of BOLD (blood oxygen level dependent)) were calculated for both cognition tasks. The result of calculating a cerebral LI based on neural activation area suggested that the right hemisphere is dominant during visuospatial tasks and the left hemisphere is dominant during verbal tasks. When a cerebral LI was computed on the basis of the neural activation intensity, it was shown that the area of cerebral lateralization closely related to visuospatial tasks is the superior parietal lobe, and the area of cerebral lateralization closely related to verbal tasks is the inferior and middle frontal lobe. Since the proposed method can determine the dominance of the cerebrum by each area, it can be helpful to determine cerebral lateralization accurately and easily.

A study on the cerebral sizes of Koreans in their 20S and 40S.

The purpose of this study was to measure the cerebral sizes of Korean adults in their third (20s) and fifth decades (40s) of life using Talairach-Nowinski reference points to determine the effect of sex and age on cerebral size and asymmetry. Magnetic resonance images of the brain of 94 adults between 20 and 29 years of age (43 males and 51 females) and 99 adults between 40 and 49 years of age (38 males and 61 females) were measured. The distance between reference points and cerebral size of males was greater than those of females. Cerebral width and the size of the left cerebrum of those in their 40s decreased more than those in their 20s. The effect of age on left cerebral atrophy of males was greater than that of females. Left cerebral size was greater than right cerebral size. There was no difference in cerebral asymmetry between the genders. Cerebral asymmetry of those in their 40s was smaller than of those in their 20s and the decrease of cerebral asymmetry of males due to age was greater than that of females. A positive relationship existed between cerebral height, and body height and weight for males in their 20s.

Laser parameters for efficient biomedical stimulation: A study to increase cognitive response rate.

BACKGROUND: The laser is able to irradiate the exact amount of stimulation to an area by a non contact method, and has the advantage of being able to stimulate the local target area. OBJECTIVE: This study examined an efficient method of laser tactile stimulation using laser parameter combinations. METHODS: The laser parameters that could cause an increase in the cognitive response rate of human subjects were examined without increasing the amount of total laser energy. RESULTS: As a result, the appropriate matching parameters such as duty ratio, pulse frequency, and exposure time of laser pulses showed a dominant influence in effectively increasing the tactile response rate of subjects with limited amount of total laser energy. CONCLUSIONS: This study can be applied to neurophysiology, cognitive research, and clinical laser application.

A study on detection of glucose concentration using changes in color coordinates.

Glucose concentration is closely related to the metabolic activity of cells and it is the most important substance as the energy source of a living body which plays an important role in the human body. This paper proposes an optical method that can measure the concentration of glucose. The change in glucose concentration was observed by using CIE diagram, and wavelength and purity values were detected. Also, even small changes in glucose concentration can be evaluated through mathematical modeling. This system is simple, economical, and capable of quantifying optical signals with numerical values for glucose sensing. This method can be applicable to the clinical field that examines diabetes mellitus or metabolic syndrome.

Mid-Air Tactile Stimulation Using Indirect Laser Radiation.

In this paper, we demonstrate that a laser irradiated on a thin light-absorbing elastic medium attached on the skin can elicit a tactile sensation of mechanical tap. First, we present simulation results that show laser irradiation to the elastic medium creates inner elastic waves on the basis of thermoelastic effects and these elastic waves trigger the bending deformation of the medium, which then stimulates the skin. Second, we analyze the physical properties of the associated stimulus by measuring its force profile. Third, we identify the perceptual characteristics of the stimulus in comparison to those of mechanical and electrical stimuli by means of a perceptual experiment employing dissimilarity rating. All the evidence indicates that indirect laser radiation provides a sensation of short mechanical tap. Furthermore, little individual difference was observed in the results of the perceptual experiment. To the best of our knowledge, this study is the first in reporting the feasibility of indirect laser radiation for mid-air tactile rendering.

Responses of human sensory characteristics to 532 nm pulse laser stimuli.

BACKGROUND: Lasers are advantageous in some applications to stimulate a small target area and is used in various fields such as optogenetic, photoimmunological and neurophysiological studies. OBJECTIVE: This study aims to implement a non-contact sense of touch without damaging biological tissues using laser. METHODS: Various laser parameters were utilized in safety range to induce a sense of touch and investigate the human responses. With heat distribution simulation, the amount of changes in the temperature and the tendency in laser parameters of sensory stimulation were analyzed. RESULTS: The results showed the identified tactile responses in safety range with various laser parameters and temperature distribution for the laser stimulus was obtained through the simulation. CONCLUSIONS: This study can be applied to the areas of sensory receptor stimulation, neurophysiology and clinical medicine.

Diverse effects of a 445 nm diode laser on isometric contraction of the rat aorta.

The usefulness of visible lasers in treating vascular diseases is controversial. It is probable that multiple effects of visible lasers on blood vessels and their unclear mechanisms have hampered the usefulness of this therapy. Therefore, elucidating the precise actions and mechanisms of the effects of lasers on blood vessels would provide insight into potential biomedical applications. Here, using organ chamber isometric contraction measurements, western blotting, patch-clamp, and en face immunohistochemistry, we showed that a 445 nm diode laser contracted rat aortic rings, both by activating endothelial nitric oxide synthase and by increasing oxidative stress. In addition to the effects on the endothelium, the laser also directly relaxed and contracted vascular smooth muscle by inhibiting L-type Ca(2+) channels and by activating protein tyrosine kinases, respectively. Thus, we conclude that exposure to 445 nm laser might contract and dilate blood vessels in the endothelium and smooth muscle via distinct mechanisms.

A new optical technique to monitor joint motion using position sensitive detector.

BACKGROUND: Evaluation of joint movements is essential to choose an appropriate rehabilitation protocol for a patient. OBJECTIVE: The aim of this study is to suggest an alternative optical technique for measurement of joint angle which is convenient, inexpensive, and can be operated in real time. METHODS: According to the principle of the triangulation method, position sensitive detector (PSD) converts reflected light signals into distance-related voltages. Various parameters were investigated to increase detection range and resolution of joint angle measurements. RESULTS: The accuracy of the suggested optical sensor was verified by comparing with a commercial goniometer and 3D motion capture system. CONCLUSIONS: This method can be applied to monitor recovery progress for the patient in rehabilitation and sport science.

Development of multi-colored LED system for therapeutic application.

BACKGROUND: The evaluation and control of lighting is crucial in physiological, biomedical, and industrial fields. Many kinds of lighting techniques based on LED have been developed due to its advantages. OBJECTIVE: The aim of this study is to develop the multi-colored LED system for healing purposes. METHODS: Light source with three-color chip LEDs was investigated to detect the dominant wavelength. RESULTS: The results show that the additive principle by three-color LEDs can be successfully applied to lighting system by generating a variety of colors. CONCLUSIONS: The results are expected to be useful in the field of light therapy and medicine. Applications of the developed light system are lighting therapies such as stimulating blood circulation and digestive processes, and controlling inflammation.

Study of somesthesis according to change in pulse diode laser parameters.

Laser can precisely deliver quantitative energy to a desired region in a non-contact way. Since it can stimulate regions and minutely control parameters such as the intensity, duration and frequency of stimulus, laser is often used for the areas such as low power laser treatment and clinical physiology. This study proposes simulation using pulse diode laser with reliable output and identifies laser parameters that can present a variety of somesthesis. It is found that typically, as frequency and energy increase, the ratio of feeling senses increases, and dominant sense moves from the sense of heat through tactile sense to pain. This study will be baseline data for studies of the sense of heat, tactile sense and pain, contribute to studying neurophysiology sector and be applied to basic clinical research.

Simple LED spectrophotometer for analysis of color information.

A spectrophotometer is the basic measuring equipment essential to most research activity fields requiring samples to be measured, such as physics, biotechnology and food engineering. This paper proposes a system that is able to detect sample concentration and color information by using LED and color sensor. Purity and wavelength information can be detected by CIE diagram, and the concentration can be estimated with purity information. This method is more economical and efficient than existing spectrophotometry, and can also be used by ordinary persons. This contribution is applicable to a number of fields because it can be used as a colorimeter to detect the wavelength and purity of samples.

Evaluation of the possibility and response characteristics of laser-induced tactile sensation.

In this study, we examined the possibility and perceptual response characteristics of tactile sense induced by laser stimulation to the finger with different laser energy densities through human response experiments. 15 healthy adult males and 4 healthy adult females with an age of 22.6±2.2 years were tested. A frequency-doubled Q-switched laser was used with a wavelength of 532 nm and a 5 ns pulse width. The experimental trial spanned a total of 30 s and included a rest phase (19 s), a stimulation phase (7 s), and a response phase (4 s). During the rest phase, subjects kept their fingers comfortable. During the stimulation phase, one of three types of laser energy density (13.5, 16.6, 19.8 mJ/cm(2)) or a sham stimulation was used to irradiate the distal phalanx on the right index finger. During the response phase, the cognitive response to the laser stimulation was recorded by a PC by pressing the response button. The confusion matrix was configured to evaluate the possibility that the tactile sense was caused by the laser. In addition, changes in the response characteristics were observed according to three types of laser energy densities. From the analysis of the confusion matrix, the accuracy and sensitivity were not high. In contrast, precision and specificity were found to be high. Furthermore, there was a strong positive correlation between the laser irradiation and tactile perception, indicating that tactile sense can be induced using a laser in a mid-air manner. In addition, it was found that as the laser energy density increased, the tactile perception possibility also increased.

Photomechanical effect on Type I collagen using pulsed diode laser.

BACKGROUND: As the most abundant protein in human tissues, the use of collagen is essential in the fields of biological science and medicine. OBJECTIVE: The aim of this study is to investigate the mechanical effect of pulsed laser irradiation on collagen tissue. METHODS: With various laser parameters such as peak power, pulse width, and repetition rate, the induced stresses on samples were measured and analyzed. Monte Carlo simulation was performed to investigate the effect of laser parameters on the collagen sample. RESULTS: The results indicated that the magnitude of mechanical stress could be controlled by various laser parameters. CONCLUSIONS: This study can be used in biostimulation for therapy and mechanoreceptor stimulation for tactile application.