Mechanochemically Enabled Metastable Niobium Tungsten Oxides.

Metastable compounds have greatly expanded the synthesizable compositions of solid-state materials and have attracted enormous amounts of attention in recent years. Especially, mechanochemically enabled metastable materials synthesis has been very successful in realizing cation-disordered materials with highly simple crystal structures, such as rock salts. Application of the same strategy for other structural types, especially for non-close-packed structures, is peculiarly underexplored. Niobium tungsten oxides (NbWOs), a class of materials that have been under the spotlight because of their diverse structural varieties and promising electrochemical and thermoelectric properties, are ideally suited to fill such a knowledge gap. In this work, we develop a new series of metastable NbWOs and realize one with a fully cation-disordered structure. Furthermore, we find that metastable NbWOs transform to a cation-disordered cubic structure when applied as a Li-ion battery anode, highlighting an intriguing non-close-packed-close-packed conversion process, as evidenced in various physicochemical characterizations, in terms of diffraction, electronic, and vibrational structures. Finally, by comparing the cation-disordered NbWO with other trending cation-disordered oxides, we raise a few key structural features for cation disorder and suggest a few possible research opportunities for this field.

Na2.5 Cr0.5 Zr0.5 Cl6 : A New Halide-Based Fast Sodium-Ion Conductor.

All-solid-state batteries employing solid electrolytes (SEs) have received widespread attention due to their high safety. Recently, lithium halides are intensively investigated as promising SEs while their sodium counterparts are less studied. Herein, a new sodium-ion conductor with a chemical formula of Na2.5 Cr0.5 Zr0.5 Cl6 is reported, which exhibits high room temperature ionic conductivity of 0.1 mS cm-1 with low migration energy barrier of ≈0.41 eV. Na2.5 Cr0.5 Zr0.5 Cl6 has a Fm-3m structure with 41.67 mol.% of cationic vacancies owing to the occupation of Cr (8.33 mol.%) and Zr (8.33 mol.%) ions at Na sites. Supercell calculations show that the lowest columbic energy configuration has Cr/Zr/V (where V is the vacancy) clusters in the structure. Nonetheless, the clusters have mixed effects on the sodium ion conduction pathway, based on the Bond Valence Energy Landscape calculation. A global 3D Na-ion transport percolation network can be revealed in the lowest energy supercell. Effective pathways are connected through the NaCl6 and VCl6 nodes. Besides, Raman spectroscopy and 23 Na solid-state nuclear magnetic resonance spectroscopy further prove the tunable structure of the SEs with different Cr to Zr ratios. The optimization between the concentration of Na+ and vacancies is crucial to create an improved network of Na+ diffusion channels.

Enhancing Ionic Transport and Structural Stability of Lithium-Rich Layered Oxide Cathodes via Local Structure Regulation.

Lithium-rich manganese-based layered oxides (LRM) have garnered considerable attention as cathode materials due to their superior performance. However, the inherent structural degradation and obstruction of ion transport during cycling lead to capacity and voltage decay, impeding their practical applications. Herein, an Sb-doped LRM material with local spinel phase is reported, which has good compatibility with the layered structure and provides 3D Li+ diffusion channels to accelerate Li+ transport. Additionally, the strong Sb-O bond enhances the stability of the layered structure. Differential electrochemical mass spectrometry indicates that highly electronegative Sb doping effectively suppresses the release of oxygen in the crystal structure and mitigates successive electrolyte decomposition, thereby reducing structural degradation of the material. As a result of this dual-functional design, the 0.5 Sb-doped material with local spinel phases exhibits favorable cycling stability, retaining 81.7% capacity after 300 cycles at 1C, and an average discharge voltage of 1.87 mV per cycle, which is far superior to untreated material with retention values of 28.8% and 3.43 mV, respectively. This study systematically introduces Sb doping and regulates local spinel phases to facilitate ion transport and alleviate structural degradation of LRM, thereby suppressing capacity and voltage fading, and improving the electrochemical performance of batteries.

Solid-state rigid-rod polymer composite electrolytes with nanocrystalline lithium ion pathways.

A critical challenge for next-generation lithium-based batteries lies in development of electrolytes that enable thermal safety along with the use of high-energy-density electrodes. We describe molecular ionic composite electrolytes based on an aligned liquid crystalline polymer combined with ionic liquids and concentrated Li salt. This high strength (200 MPa) and non-flammable solid electrolyte possesses outstanding Li+ conductivity (1 mS cm-1 at 25 °C) and electrochemical stability (5.6 V versus Li|Li+) while suppressing dendrite growth and exhibiting low interfacial resistance (32 Ω cm2) and overpotentials (≤120 mV at 1 mA cm-2) during Li symmetric cell cycling. A heterogeneous salt doping process modifies a locally ordered polymer-ion assembly to incorporate an inter-grain network filled with defective LiFSI and LiBF4 nanocrystals, strongly enhancing Li+ conduction. This modular material fabrication platform shows promise for safe and high-energy-density energy storage and conversion applications, incorporating the fast transport of ceramic-like conductors with the superior flexibility of polymer electrolytes.

Electrical Properties of Hollandite-Type Ba1.33Ga2.67Ti5.33O16, K1.33Ga1.33Ti6.67O16, and K1.54Mg0.77Ti7.23O16.

Electrical conductivity and electrochemical catalytic activity for H2 oxidation of Ti-based hollandite-type Ba1.33Ga2.67Ti5.33O16 (BGT), K1.33Ga1.33Ti6.67O16 (KGT), and K1.54Mg0.77Ti7.23O16 (KMT) were investigated, along with the chemical stability of KMT under H2 at elevated temperature. BGT, KGT, and KMT crystallized in a tetragonal structure with the space-group I4/ m. The electrical conductivity in H2 increases with increasing Ti content, and the highest total electrical conductivity of 2 S/cm at 800 °C in H2 was observed for KMT. KGT:Fe (1:1) + 20% LSGM + 30% porosity composite electrode showed the lowest area specific resistance of ca. 1.6 Ω cm2 at 800 °C for hydrogen oxidation reaction (HOR) under the open circuit condition. Moderate catalytic activity for HOR could be attributed to poor oxide ion conductivity and exclusion of potassium and hydrogen uptake in H2 at elevated temperature. Bond valence sum mismatch map calculation showed that the ionic transport happens along the 1D channel of c-axis in the hollandite oxides.

Insights into B-Site Ordering in Double Perovskite-Type Ba3Ca1+ xNb2- xO9-δ (0 ≤ x ≤ 0.45): Combined Synchrotron and Neutron Diffraction and Electrical Transport Analyses.

Perovskite-type metal oxides are being used in a wide range of technologies, including fuel cells, batteries, electrolyzers, dielectric capacitors, and sensors. One of their remarkable structural properties is cationic ordering in A or B sites, which affects electrical transport properties under different gaseous atmospheres, and chemical stability under CO2 and humid conditions. For example, a simple-perovskite-type Y-doped BaCeO3 forms BaCO3 and ((Ce,Y)O2-δ) under CO2 at elevated temperature, while B-site-ordered double-perovskite-type Ba3Ca1.18Nb1.82O9-δ remains chemically stable under the same conditions. Early structural studies on Ba3Ca1+ xNb2- xO9-δ (BCN) showed that the B-site ordering (1:1) is sensitive to the Ca content. However, ambiguity rises, as 1:2 B-site ordering was not observed in the parent and doped analogues when x was varied, which motivated us to revisit the complex oxides BCN ( x = 0-0.45) to determine the atomic structure by a mean of combined synchrotron X-ray and neutron diffraction methods. Surprisingly, the B-site ordering increases with increasing Ca/Nb mixing in the B-sites in BCN. In addition, the electrical conductivity of BCN was found to be the highest at x = ∼0.18, and it decreased as the Ca/Nb ratio further increased in BCN. Such a result was very similar to that for the Y-doped BaZrO3, where the mobility of proton carriers was found to decrease as the dopant (Y) increased. A higher Ca/Nb ratio also promotes the growth of grain size, as Ca ions could serve as a sintering aid, improving the structural integrity.

Studies on polymorphic sequence during the formation of the 1:1 ordered perovskite-type BaCa(0.335)M(0.165)Nb(0.5)O(3-δ) (M = Mn, Fe, Co) using in situ and ex situ powder X-ray diffraction.

Here, we report a synthetic strategy to control the B-site ordering of the transition metal-doped perovskite-type oxides with the nominal formula of BaCa(0.335)M(0.165)Nb(0.5)O(3-δ) (M = Mn, Fe, Co). Variable temperature (in situ) and ex situ powder X-ray diffraction (PXRD), selected area electron diffraction (SAED), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), scanning/transmission electron microscopy (SEM/TEM), and thermogravimetic analysis (TGA) were used to understand the B-site ordering as a function of temperature. The present study shows that BaCa(0.335)M(0.165)Nb(0.5)O(3-δ) crystallizes in the B-site disordered primitive perovskite (space group s.g. Pm3̅m) at 900 °C in air, which can be converted into the B-site 1:2 ordered perovskite (s.g. P3̅m1) at 1200 °C and the B-site 1:1 ordered perovskite phase (s.g. Fm3̅m) at 1300 °C. However, the reverse reaction is not feasible when the temperature is reduced. FTIR revealed that no carbonate species were present in all three polymorphs. The chemical stability of the investigated perovskites in CO2 and H2 highly depends on the B-site cation ordering. For example, TGA confirmed that the B-site disordered primitive perovskite phase is more readily reduced in dry and wet 10% H2/90% N2 and is less stable in pure CO2 at elevated temperature, compared to the B-site 1:1 ordered perovskite-type phase of the same nominal composition.

Sustainable Anionic Redox by Inhibiting Li Cross-Layer Migration in Na-Based Layered Oxide Cathodes.

The irrational utilization of an anionic electron often accompanies structural degradation with an irreversible cation migration process upon cycling in sodium-layered oxide cathodes. Moreover, the insufficient understanding of the anionic redox involved cation migration makes the design strategies of high energy density electrodes even less effective. Herein, a P3-Na0.67Li0.2Fe0.2Mn0.6O2 (P3-NLFM) cathode is proposed with the in-plane disordered Li distribution after an in-depth remolding of the Li ribbon-ordered P3-Na0.6Li0.2Mn0.8O2 (P3-NLM) layered oxide. The disordered Li sublattice in the transition metal slab of P3-NLFM leads to the dispersed |O2p orbitals, the lowered charge transfer gap, and the suppressed phase transition at high voltages. Then the enhanced Mn-O interaction and electronic stability are disclosed by the crystal orbital Hamilton population (COHP) analysis at high voltage in P3-NLFM. Furthermore, ab initio molecular dynamics (AIMD) simulation suggests the order/disorder of the transition metal layer is highly correlated with the stability of the Li sublattice. The cross-layer migration and loss of Li in P3-NLM are suppressed in P3-NLFM to enable the high reversibility upon cycling. As a result, the P3-NLFM delivers a high capacity of 163 mAh g-1 without oxygen release and an enhanced capacity retention of 81.9% (vs 42.9% in P3-NLM) after 200 cycles, which constitutes a promising approach for sustainable oxygen redox in rechargeable batteries.

Promoting high-voltage stability through local lattice distortion of halide solid electrolytes.

Stable solid electrolytes are essential to high-safety and high-energy-density lithium batteries, especially for applications with high-voltage cathodes. In such conditions, solid electrolytes may experience severe oxidation, decomposition, and deactivation during charging at high voltages, leading to inadequate cycling performance and even cell failure. Here, we address the high-voltage limitation of halide solid electrolytes by introducing local lattice distortion to confine the distribution of Cl-, which effectively curbs kinetics of their oxidation. The confinement is realized by substituting In with multiple elements in Li3InCl6 to give a high-entropy Li2.75Y0.16Er0.16Yb0.16In0.25Zr0.25Cl6. Meanwhile, the lattice distortion promotes longer Li-Cl bonds, facilitating favorable activation of Li+. Our results show that this high-entropy halide electrolyte boosts the cycle stability of all-solid-state battery by 250% improvement over 500 cycles. In particular, the cell provides a higher discharge capacity of 185 mAh g-1 by increasing the charge cut-off voltage to 4.6 V at a small current rate of 0.2 C, which is more challenging to electrolytes|cathode stability. These findings deepen our understanding of high-entropy materials, advancing their use in energy-related applications.

A New Zinc Salt Chemistry for Aqueous Zinc-Metal Batteries.

Aqueous zinc-ion batteries (ZIBs) are promising energy storage solutions with low cost and superior safety, but they suffer from chemical and electrochemical degradations closely related to the electrolyte. Here, a new zinc salt design and a drop-in solution for long cycle-life aqueous ZIBs are reported. The salt Zn(BBI)2 with a rationally designed anion group, N-(benzenesulfonyl)benzenesulfonamide (BBI- ), has a special amphiphilic molecular structure, which combines the benefits of hydrophilic and hydrophobic groups to properly tune the solubility and interfacial condition. This new zinc salt does not contain fluorine and is synthesized via a high-yield and low-cost method. It is shown that 1 m Zn(BBI)2 aqueous electrolyte with a widened cathodic stability window effectively stabilizes Zn metal/H2 O interface, mitigates chemical and electrochemical degradations, and enables both symmetric and full cells using a zinc-metal electrode.

Novel Low-Strain Layered/Rocksalt Intergrown Cathode for High-Energy Li-Ion Batteries.

Both layered- and rocksalt-type Li-rich cathode materials are drawing great attention due to their enormous capacity, while the individual phases have their own drawbacks, such as great volume change for the layered phase and low electronic and ionic conductivities for the rocksalt phase. Previously, we have reported the layered/rocksalt intergrown cathodes with nearly zero-strain operation, while the use of precious elements hinders their industrial applications. Herein, low-cost 3d Mn4+ ions are utilized to partially replace the expensive Ru5+ ions, to develop novel ternary Li-rich cathode material Li1+x[RuMnNi]1-xO2. The as-designed Li1.15Ru0.25Mn0.2Ni0.4O2 is revealed to have a layered/rock salt intergrown structure by neutron diffraction and transmission electron microscopy. The as-designed cathode exhibits ultrahigh lithium-ion reversibility, with 0.86 (231.1 mAh g-1) out of a total Li+ inventory of 1.15 (309.1 mAh g-1). The X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectra further demonstrate that the high Li+ storage of the intergrown cathode is enabled by leveraging cationic and anionic redox activities in charge compensation. Surprisingly, in situ X-ray diffraction shows that the intergrown cathode undergoes extremely low-strain structural evolution during the charge-discharge process. Finally, the Mn content in the intergrown cathodes is found to be tunable, providing new insights into the design of advanced cathode materials for high-energy Li-ion batteries.

Over-Stoichiometric Metastabilization of Cation-Disordered Rock Salts.

Cation-disordered rock salts (DRXs) are well known for their potential to realize the goal of achieving scalable Ni- and Co-free high-energy-density Li-ion batteries. Unlike in most cathode materials, the disordered cation distribution may lead to more factors that control the electrochemistry of DRXs. An important variable that is not emphasized by research community is regarding whether a DRX exists in a more thermodynamically stable form or a more metastable form. Moreover, within the scope of metastable DRXs, over-stoichiometric DRXs, which allow relaxation of the site balance constraint of a rock salt structure, are particularly underexplored. In this work, these findings are reported in locating a generally applicable approach to "metastabilize" thermodynamically stable Mn-based DRXs to metastable ones by introducing Li over-stoichiometry. The over-stoichiometric metastabilization greatly stimulates more redox activities, enables better reversibility of Li deintercalation/intercalation, and changes the energy storage mechanism. The metastabilized DRXs can be transformed back to the thermodynamically stable form, which also reverts the electrochemical properties, further contrasting the two categories of DRXs. This work enriches the structural and compositional space of DRX families and adds new pathways for rationally tuning the properties of DRX cathodes.

Thermochemistry of Sr2Ce(1-x)Pr(x)O4 (x = 0, 0.2, 0.5, 0.8, and 1): variable-temperature and -atmosphere in-situ and ex-situ powder X-ray diffraction studies and their physical properties.

A novel family of metal oxides with a chemical formula of Sr(2)Ce(1-x)Pr(x)O(4) (x = 0, 0.2, 0.5, 0.8, and 1) was developed as mixed oxide ion and electronic conductors for solid oxide fuel cells (SOFCs). All of the investigated samples were synthesized by the ceramic method at 1000 °C in air and characterized by powder X-ray diffraction (PXRD), selected area electron diffraction (SAED), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and electrochemical impedance spectroscopy (EIS). Ex-situ PXRD reveals that the Sr(2)PbO(4)-type Sr(2)CeO(4) decomposes readily into a mixture of perovskite-type SrCeO(3) and rock-salt-type SrO at 1400 °C in air. Surprisingly, the decomposed products are converted back to the original Sr(2)PbO(4)-type Sr(2)CeO(4) phase at 800 °C in air, as confirmed by in-situ PXRD. Thermal decomposition is highly suppressed in Sr(2)Ce(1-x)Pr(x)O(4) compounds for Pr > 0, suggesting that Pr improves the thermal stability of the compounds. Rietveld analysis of PXRD and SAED supported that both Pr and Ce ions are located on the 2a site in Pbam (space group no. 55). The electrical transport mechanism could be correlated to the reduction of Pr and/or Ce ions and subsequent loss of oxide ions at elevated temperatures, as shown by TGA and in-situ PXRD. Conductivity increases with Pr content in Sr(2)Ce(1-x)Pr(x)O(4). The highest total conductivity of 1.24 × 10(-1) S cm(-1) was observed for Sr(2)Ce(0.2)Pr(0.8)O(4) at 663 °C in air.

Anthraquinone derivatives as electron-acceptors with liquid crystalline properties.

Dialkoxy derivatives of anthraquinone (AQ), dicyano-anthraquinone (DCAQ) and tetracyanoanthraquinone (TCAQ) were synthesized and their associated electrochemical, optical and self-assembling properties were investigated as candidates for n-type materials. AQ shows UV absorption features, whereas both DCAQ and TCAQ exhibit bathochromic and hyperchromic electronic transitions into the visible region. The electron accepting strength of the three compounds was established by cyclic voltammetry as -1.52 V, -1.3 V and -0.9 V vs. ferrocene/ferricenium for AQ, DCAQ and TCAQ, respectively. All three quinones displayed quasireversible, two sequential one-electron transfer redox reactions. DFT calculations of DCAQ and TCAQ demonstrate structural changes upon reduction, which is supported by spectroelectrochemical experiments. Furthermore, the structural changes result in different absorption profiles and show potential as electrochromic materials. Finally, both AQ and DCAQ show liquid crystalline phases and importantly, DCAQ exhibits both a smectic liquid crystalline and a soft crystal phase between -6 °C and 85 °C, which offers promise as a self-assembling n-type material.

Bio-inspired phosphole-lipids: from highly fluorescent organogels to mechanically responsive FRET.

Sensitive gels: the amphiphilic features of phosphole-lipids lead to intriguing self-assembly properties and the formation of highly fluorescent organogels. Moreover, the dynamic structural features of the system make it possible to amplify the mechanochromic emission shifts (100 nm) in a donor-acceptor system through thermally and mechanically responsive fluorescence resonance energy transfer (FRET).

Lithiated Prussian blue analogues as positive electrode active materials for stable non-aqueous lithium-ion batteries.

Prussian blue analogues (PBAs) are appealing active materials for post-lithium electrochemical energy storage. However, PBAs are not generally suitable for non-aqueous Li-ion storage due to their instability upon prolonged cycling. Herein, we assess the feasibility of PBAs with various lithium content for non-aqueous Li-ion storage. We determine the crystal structure of the lithiated PBAs via neutron powder diffraction measurements and investigate the influence of water on structural stability and Li-ion migration through operando X-ray diffraction measurements and bond valence simulations. Furthermore, we demonstrate that a positive electrode containing Li2-xFeFe(CN)6⋅nH2O (0 ≤ x ≤ 2) active material coupled with a Li metal electrode and a LiPF6-containing organic-based electrolyte in coin cell configuration delivers an initial discharge capacity of 142 mAh g-1 at 19 mA g-1 and a discharge capacity retention of 80.7% after 1000 cycles at 1.9 A g-1. By replacing the lithium metal with a graphite-based negative electrode, we also report a coin cell capable of cycling for more than 370 cycles at 190 mA g-1 with a stable discharge capacity of about 105 mAh g-1 and a discharge capacity retention of 98% at 25 °C.

Slight compositional variation-induced structural disorder-to-order transition enables fast Na+ storage in layered transition metal oxides.

The omnipresent Na+/vacancy orderings change substantially with the composition that inevitably actuate the ionic diffusion in rechargeable batteries. Therefore, it may hold the key to the electrode design with high rate capability. Herein, the influence of Na+/vacancy ordering on Na+ mobility is demonstrated firstly through a comparative investigation in P2-Na2/3Ni1/3Mn2/3O2 and P2-Na2/3Ni0.3Mn0.7O2. The large zigzag Na+/vacancy intralayer ordering is found to accelerate Na+ migration in P2-type Na2/3Ni1/3Mn2/3O2. By theoretical simulations, it is revealed that the Na+ ordering enables the P2-type Na2/3Ni1/3Mn2/3O2 with higher diffusivities and lower activation energies of 200 meV with respect to the P3 one. The quantifying diffusional analysis further prove that the higher probability of the concerted Na+ ionic diffusion occurs in P2-type Na2/3Ni1/3Mn2/3O2 due to the appropriate ratio of high energy ordered Na ions (Naf) occupation. As a result, the interplay between the Na+/vacancy ordering and Na+ kinetic is well understood in P2-type layered cathodes.

External-stimuli responsive photophysics and liquid crystal properties of self-assembled "phosphole-lipids".

A series of new amphiphilic phosphonium materials that combine the electronic features of phospholes with self-assembly features of lipids were synthesized. Variable concentration/temperature and 2D NMR studies suggested that the systems undergo intramolecular conformation changes between a "closed" and "open" form that are triggered by intermolecular interactions. The amphiphilic features of the phospholium species also induce liquid crystalline and soft crystal phase behavior in the solid state, which was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and variable temperature powder X-ray diffraction (VT-PXRD). The studies revealed that both conjugated backbones and counteranions work together to organize the systems into different morphologies (liquid crystal/soft crystal). Dithieno[3,2-b:2',3'-d]phosphole-based compounds exhibit enhanced emission in the solid state and at low temperature in solution due to aggregation-induced enhanced emission (AIEE). Photoinduced electron transfer (PET) induced via the alkoxybenzyl group at the phosphonium center in the fused-ring systems can be effectively suppressed through intermolecular charge transfer (ICT) processes within the main scaffold of a nonfused system, which was confirmed by static and dynamic fluorescence spectroscopy. The dynamic features of these new materials also endow the systems with external-stimuli responsive photophysical properties that can be triggered by temperature and/or mechanical forces.

Layered-rocksalt intergrown cathode for high-capacity zero-strain battery operation.

The dependence on lithium-ion batteries leads to a pressing demand for advanced cathode materials. We demonstrate a new concept of layered-rocksalt intergrown structure that harnesses the combined figures of merit from each phase, including high capacity of layered and rocksalt phases, good kinetics of layered oxide and structural advantage of rocksalt. Based on this concept, lithium nickel ruthenium oxide of a main layered structure (R[Formula: see text]m) with intergrown rocksalt (Fm[Formula: see text]m) is developed, which delivers a high capacity with good rate performance. The interwoven rocksalt structure successfully prevents the anisotropic structural change that is typical for layered oxide, enabling a nearly zero-strain operation upon high-capacity cycling. Furthermore, a design principle is successfully extrapolated and experimentally verified in a series of compositions. Here, we show the success of such layered-rocksalt intergrown structure exemplifies a new battery electrode design concept and opens up a vast space of compositions to develop high-performance intergrown cathode materials.

Distinct Surface and Bulk Thermal Behaviors of LiNi0.6Mn0.2Co0.2O2 Cathode Materials as a Function of State of Charge.

Understanding how structural and chemical transformations take place in particles under thermal conditions can inform designing thermally robust electrode materials. Such a study necessitates the use of diagnostic techniques that are capable of probing the transformations at multiple length scales and at different states of charge (SOC). In this study, the thermal behavior of LiNi0.6Mn0.2Co0.2O2 (NMC-622) was examined as a function of SOC, using an array of bulk and surface-sensitive techniques. In general, thermal stability decreases as lithium content is lowered and conversion in the bulk to progressively reduced metal oxides (spinels, rock salt) occurs as the temperature is raised. Hard X-ray absorption spectroscopy (XAS) and X-ray Raman spectroscopy (XRS) experiments, which probe the bulk, reveal that Ni and Co are eventually reduced when partially delithiated samples (regardless of the SOC) are heated, although Mn is not. Surface-sensitive synchrotron techniques, such as soft XAS and transmission X-ray microscopy (TXM), however, reveal that for 50% delithiated samples, apparent oxidation of nickel occurs at particle surfaces under some circumstances. This is partially compensated by reduction of cobalt but may also be a consequence of redistribution of lithium ions upon heating. TXM results indicate the movement of reduced nickel ions into particle interiors or oxidized nickel ions to the surface or both. These experiments illustrate the complexity of the thermal behavior of NMC cathode materials. The study also informs the importance of investigating the surface and bulk difference as a function of SOC when studying the thermal behaviors of battery materials.