Small-Scale Assays for Studying Dissolution of Pharmaceutical Cocrystals for Oral Administration.

The purpose of this study was to better understand the dissolution properties and precipitation behavior of pharmaceutical cocrystals of poorly soluble drugs for the potential for oral administration based on a small-scale dissolution assay. Carbamazepine and indomethacin cocrystals with saccharin and nicotinamide as coformers were prepared with the sonic slurry method. Dissolution of the poorly soluble drugs indomethacin and carbamazepine and their cocrystals was studied with a small-scale dissolution assay installed on a SiriusT3 instrument. Two methodologies were used: (i) surface dissolution of pressed tablet (3 mm) in 20 mL running for fixed times at four pH stages (pH 1.8, pH 3.9, pH 5.4, pH 7.3) and (ii) powder dissolution (2.6 mg) in 2 mL at a constant pH (pH 2). Improved dissolution and useful insights into precipitation kinetics of poorly soluble compounds from the cocrystal form can be revealed by the small-scale dissolution assay. A clear difference in dissolution/precipitation behaviour can be observed based on the characteristics of the coformer used.

Determinants of community engagement and its role in income poverty reduction: Evidence from Jajarkot, Nepal.

This study examined the determinants of community engagement and its contribution to poverty reduction in Jajarkot, Nepal. Primary data were collected from 448 households using a structured questionnaire survey and key informant interviews. The collected data were analyzed using mean comparison t-tests, probit analysis, and binary logistic regression models. The results indicated that the education level of respondents, months of sufficient food, willingness to work as a team, and the level of social participation positively and significantly influenced community engagement. Furthermore, community engagement, participation in the decision-making process, and skill related training were found to be positively correlated with income. The study identified a significant difference in mean income between the engaged and non-engaged groups, with a margin of 471 USD, suggesting that community engagement can increase the income of the engaged groups and thereby contribute to poverty reduction. Community groups, local governments, and national and international organizations should develop an inclusive strategy that involves households in community groups to produce more effective results in society.

Oxidative degradation studies of an oxazolidinone-derived antibacterial agent, RWJ416457, in aqueous solutions.

The rates of oxidative degradation of a new antibacterial drug, RWJ416457, in aqueous solutions were investigated over the pH-range of 2 to 10. Two oxidative degradates were identified and the influences of pH, buffer concentration, metal ions, metal chelating agents, and temperatures were studied. The pH, metal chelating agents, and metal ions significantly changed the product distribution in addition to the degradation rate. Oxidative degradation is believed to follow a hydrogen abstraction (HAT) pathway. One degradate was the major product under acidic conditions and its predominance is attributed to a resonance-stabilized intermediate. The importance of the resonance structure was diminished under neutral and basic conditions. The product distribution changed and two degradates were formed in equal amounts. The study results guided the formulation development to minimize oxidation.

A Novel Use of Nanocrystalline Suspensions to Develop Sub-Microgram Dose Micro-Tablets.

Developing solid oral drug products with good content uniformity (CU) at low doses is challenging; this challenge further aggravates when the tablet size decreases from a conventional tablet to a micro/mini-tablet (1.2-3 mm diameter). To alleviate the CU issues, we present a novel use of nanocrystalline suspension combined with high shear wet granulation for the first time. In this approach, nanomilled drug in the form of nanocrystalline suspension is sprayed onto the powder bed to ensure uniform distribution. The resulting granules had adequate particle size distribution and flow characteristics to enable manufacturing of micro-tablets with good weight uniformity and tensile strength. Nanomilled drug resulted in excellent content uniformity among individual micro-tablets even at a dose strength as low as 0.16 mcg, whereas micronized drug resulted in unacceptable CU even at 5x higher dose strength (0.8 mcg). Besides, the use of nanomilled drug has enhanced the dosing flexibility of micro-tablets and showed superior dissolution performance in comparison with micronized drug with no impact of storage conditions (40 °C/75%RH for six months) on their dissolution performance. The proposed approach is simple and can be easily incorporated into traditional high shear wet granulation process to develop sub-microgram dose solid oral drug products.

Pharmaceutical amorphous solid dispersion: A review of manufacturing strategies.

Amorphous solid dispersions (ASDs) are popular for enhancing the solubility and bioavailability of poorly water-soluble drugs. Various approaches have been employed to produce ASDs and novel techniques are emerging. This review provides an updated overview of manufacturing techniques for preparing ASDs. As physical stability is a critical quality attribute for ASD, the impact of formulation, equipment, and process variables, together with the downstream processing on physical stability of ASDs have been discussed. Selection strategies are proposed to identify suitable manufacturing methods, which may aid in the development of ASDs with satisfactory physical stability.

3D printed bilayer tablet with dual controlled drug release for tuberculosis treatment.

In this study Fusion Deposition Modelling (FDM) was employed to design and fabricate a bilayer tablet consisting of isoniazid (INZ) and rifampicin (RFC) for the treatment of tuberculosis. INZ was formulated in hydroxypropyl cellulose (HPC) matrix to allow drug release in the stomach (acidic conditions) and RFC was formulated in hypromellose acetate succinate (HPMC - AS) matrix to allow drug release in the upper intestine (alkaline conditions). This design may offer a better clinical efficacy by minimizing the degradation of RFC in the acidic condition and potentially avoid drug-drug interaction. The bilayer tablet was prepared by fabricating drug containing filaments using hot melt extrusion (HME) coupled with the 3D printing. The HME and 3D printing processes were optimised to avoid drug degradation and assure consistent deposition of drug-containing layers in the tablet. The in-vitro drug release rate was optimised by varying drug loading, infilling density, and covering layers. Greater than 80% of INZ was released in 45 mins at pH 1.2 and approximately 76% of RFC was releases in 45 mins after the dissolution medium was changed to pH 7.4. The work illustrated the potential application of FDM technology in the development of oral fixed dose combination for personalised clinical treatment.

Role of wetting agents and disintegrants in development of danazol nanocrystalline tablets.

Poor wetting and/or particle aggregation are the shortcomings of the dried nanocrystalline suspensions, which subsequently might hinder the superior dissolution performance of the nano-crystalline suspensions. The objective of this study was to evaluate the effect of wetting agents and disintegrants on the dissolution performance of dried nanocrystals of an active pharmaceutical ingredient (API) with poor wetting property. Danazol, a BCS Class II compound with high LogP and low polar surface area, was chosen as a model compound for this study. Danazol nanocrystalline suspension was prepared by wet-media milling and converted into powder via spray granulation either with mannitol or microcrystalline cellulose as carriers at a drug: carrier ratio of 1:9 w/w. Danazol nanocrystalline suspension showed a superior dissolution performance compared to an un-milled danazol suspension. Dried danazol nanocrystals suffered from poor wetting leading to hindered dissolution performance i.e. ~ 40% and ~ 15% drug dissolution within 15 min for the mannitol and microcrystalline cellulose-based granules, respectively. Addition of a lipophilic surfactant (i.e. docusate sodium) at a surfactant: drug ratio of 0.015: 1 w/w during granulation helped in retaining the superior drug dissolution rates i.e. more than 80% drug dissolution within 15 min for mannitol-based granules by enhancing the wettability of dried danazol nanocrystals when compared to a hydrophilic surfactant (i.e. poloxamer 188) or disintegrant (i.e. sodium starch glycolate or croscarmellose sodium). The fast-dissolving mannitol-based granules containing danazol nanocrystals and docusate sodium were compressed into a tablet dosage form. The tablets containing danazol nanocrystals with docusate sodium showed a superior dissolution performance compared to a tablet containing un-milled danazol with docusate sodium.

Decoding the small size challenges of mini-tablets for enhanced dose flexibility and micro-dosing.

Mini-tablets are an age appropriate dosage form for oral administration to pediatric and geriatric patients, either as individual mini-tablets or as composite dosage units. Smaller size mini-tablets than the commonly used 2 mm or larger size would offer more tailored micro-dose delivery of investigational drugs. This work demonstrated drug substance particle size, drug loading and mini-tablet size ranges to achieve acceptable quality attributes of mini-tablets. A platform formulation with 60, 80, and 100 µm (particle size D6,3) ibuprofen at 3, 14, and 25% loadings were directly compressed into 1.2, 1.5, 2, and 2.5 mm diameter mini-tablets. With an enhanced weight control approach, all the mini-tablet batches except the 1.2 mm diameter mini-tablets with 100 µm ibuprofen at 3% loading would achieve acceptable content uniformity as individual mini-tablets (USP <905> L2 criteria) and as composite dosage units of five or more mini-tablets (USP <905> L1 criteria). A dissolution method was developed and successfully utilized to evaluate the formulations herein. Small size mini-tablets, small ibuprofen particle size, and low dose (or low ibuprofen loading) enhanced the dissolution performance. In addition, hypothetical scenarios of potential dose flexibility, dose range, dose titration, and excipient burden were discussed. The results of this study provide guidance for development of smaller size mini-tablets that enable dosing as a single or composite dosage unit, reduce excipient burden and leverage dispensing technology to achieve enhanced dosing flexibility and micro-dosing.

Development of low dose micro-tablets by high shear wet granulation process.

Low dose micro-tablets with acceptable quality attributes, specifically content uniformity (CU), would not only enhance the dose flexibility in the clinic, but also decrease excipient burden in pediatric population. Considering the CU challenges associated with directly compressed low dose micro-tablets, in this study, high shear wet granulation (HSWG) process was evaluated to manufacture micro-tablets with reduced CU variability. The impact of active pharmaceutical ingredient (API) particle size (D90 - 18-180 µm) and loading (0.67-16.67% w/w) on the critical quality attributes of micro-tablets (1.2 and 1.5 mm) like weight variability, CU, and dissolution were evaluated. Experimental results showed that final blends with flow function coefficient (ffc) ≥ 5.4 or Hausner ratio (HR) ≤ 1.43 facilitated robust compression of micro-tablets. With enhanced weight control, all the batches except the 1.2 mm micro-tablets and 2.0 mm micro-tablets with 0.67% w/w API loading and coarse API particle size (D90 - 180 µm) resulted in CU variability that meets the USP <905> CU acceptance criteria for individual micro-tablets. Apart from the above mentioned 1.2 mm micro-tablets, all the batches meet the USP <905> CU acceptance criteria for composites of 10 or more micro-tablets. Precise delivery of micro-tablets manufactured in the current study would allow dose titration in the increments of 11 mcg. The API particle size and loading impacted the in-vitro dissolution performance of micro-tablets with smaller API particle size and lower loading resulting in faster release profiles. This study provides a framework for developing low dose micro-tablets with acceptable quality attributes using HSWG process for micro-dosing, enhanced dose flexibility, and decreased excipient burden.

Formulation and performance of Irbesartan nanocrystalline suspension and granulated or bead-layered dried powders - Part I.

Nanocrystalline suspensions offer a promising approach to improve the dissolution rate of BCS Class II/IV drugs and hence oral bioavailability. Irbesartan (crystalline Form B), a poorly soluble drug substance was chosen as a model compound for the study. The objectives of the study were to formulate Irbesartan nanocrystalline suspension via media milling, study the effects of process and formulation variables on particle size reduction, and evaluate bead layering or spray granulation as drying processes. A Design of Experiment approach was utilized to understand the impact of formulation variables on particle size reduction via media milling. Drug concentration and type of stabilizer were found to be significant in particle size reduction. Optimized Irbesartan nanocrystalline suspension (i.e. at 10% w/w with 1% w/w poloxamer 407) showed superior in vitro dissolution profile compared to unmilled suspension. Optimized Irbesartan nanocrystalline suspension was converted into dried powders either by bead layering (with microcrystalline cellulose) or by spray granulation (either with mannitol or microcrystalline cellulose). DSC and PXRD studies revealed that Irbesartan remained crystalline post drying. Microcrystalline cellulose beads layered with Irbesartan nanocrystals showed about 65% drug dissolution within the first 10 min of dissolution study. Mannitol granules containing Irbesartan nanocrystals were fast dissolving (i.e. >90% drug dissolution within 10 min) compared to microcrystalline cellulose granules (i.e. approx. 46% drug dissolution within 10 min). Irbesartan nanocrystalline suspension had the fastest dissolution rates (i.e. >90% drug dissolution in two minutes) followed by mannitol-based granules containing dried Irbesartan nanocrystals (i.e. >90% drug dissolution in ten minutes).

Downstream processing of irbesartan nanocrystalline suspension and mini-tablet development - Part II.

The objectives of this study were to evaluate the impact of formulation variables on the drying of nanocrystalline suspensions either via bead layering or spray granulation and develop mini-tablets from the dried nanocrystalline powders. Irbesartan (crystalline Form B), a poorly soluble drug substance was chosen as a model compound. An optimized irbesartan nanocrystalline suspension with a mean particle size of 300 nm was utilized for the downstream processing. Irbesartan nanocrystalline suspension was dried either by layering onto the microcrystalline cellulose beads (i.e. 200 or 500 µm) or by granulation (mannitol or microcrystalline cellulose as substrates) at two different drug loadings (i.e. 10% or 30% w/w). Smaller size beads layered with nanocrystals resulted in faster dissolution profiles compared to larger size beads at both the studied drug loadings (i.e. 10 and 30% w/w). Mannitol granules containing irbesartan nanocrystals resulted in faster dissolution profiles compared to microcrystalline cellulose granules. Microcrystalline cellulose beads and mannitol granules containing irbesartan nanocrystals (i.e. 30% w/w drug loading) were further compressed into mini-tablets. Mini-tablets retained fast drug dissolution characteristics of the dried powders. The results from this study indicated that the spray granulation is a superior drying approach compared to bead layering for drying of irbesartan nanocrystalline suspension and mini-tablet development.

Powder X-ray diffraction as an emerging method to structurally characterize organic solids.

The current level of laboratory instrumentation and computational resources allows X-ray powder diffraction to be implemented into the toolbox of organic chemists, providing a means for rapid (i.e., within a day) structural characterization of organic solids, without the need for single crystals. We illustrate such use of powder diffraction using two case studies of molecular cocrystals of trifluoroacetic acid and malonic acid, involving theobromine, a model active pharmaceutical ingredient. We also report on a previously unobserved conformation of malonic acid in the solid state.

Engineered particles demonstrate improved flow properties at elevated drug loadings for direct compression manufacturing.

Optimizing powder flow and compaction properties are critical for ensuring a robust tablet manufacturing process. The impact of flow and compaction properties of the active pharmaceutical ingredient (API) becomes progressively significant for higher drug load formulations, and for scaling up manufacturing processes. This study demonstrated that flow properties of a powder blend can be improved through API particle engineering, without critically impacting blend tabletability at elevated drug loadings. In studying a jet milled API (D50=24µm) and particle engineered wet milled API (D50=70µm and 90µm), flow functions of all API lots were similarly poor despite the vast difference in average particle size (ffc<4). This finding strays from the common notion that powder flow properties are directly correlated to particle size distribution. Upon adding excipients, however, clear trends in flow functions based on API particle size were observed. Wet milled API blends had a much improved flow function (ffc>10) compared with the jet milled API blends. Investigation of the compaction properties of both wet and jet milled powder blends also revealed that both jet and wet milled material produced robust tablets at the drug loadings used. The ability to practically demonstrate this uncommon observation that similarly poor flowing APIs can lead to a marked difference upon blending is important for pharmaceutical development. It is especially important in early phase development during API selection, and is advantageous particularly when material-sparing techniques are utilized.

Application of liquid chromatography/mass spectrometry and nuclear magnetic resonance to the identification of degradates of a novel insulin sensitizer in aqueous solutions.

Degradation of a novel insulin sensitizer in aqueous solutions was studied using high pressure liquid chromatography/mass spectrometry (LC/MS). The insulin sensitizer, containing a thiazolidine-2,4-dione (TZD), was a new class of antidiabetic agent for the treatment of type II diabetes. Chemical stability of the insulin sensitizer was evaluated by stressing its aqueous solutions at 40 degrees C for 24 h. Oxygen was removed from one of the solutions by bubbling pure nitrogen through to identify non-oxidative pathways. LC/MS analyses of the stressed solutions revealed that hydrolysis and oxidation are the primary degradation pathways for the studied compound. A alpha-thiol acetic acid, acyl amide, and two dimeric diastereomers were the main degradates of the insulin sensitizer. The alpha-thiol acetic acid served as an intermediate-like species, and oxidized to two dimeric degradates upon exposing to air. All of them were identified as ring-opening products of the TZD. The entities of the acyl amide and dimeric degradates were respectively verified by a synthetic standard or NMR following isolation of a diastereomeric degradate. Characterization using MS in both positive and negative ion scans were discussed for an isolated diastereomeric degradate. Mechanisms of fragmentation and formation for those degradates are presented based on the MS result.

Assessing aggregation of peptide conjugate of doxorubicin using quasi-elastic light scattering and 600 MHz NMR.

The use of doxorubicin in treating prostate cancer is limited by its systemic toxicities especially cardiotoxicity and immunosuppression. Prodrugs that reduce the systemic exposure of doxorubicin are believed to provide a safety advantage. A prodrug of doxorubicin which contains a peptide sequence that can be recognized by prostate-specific antigen (PSA) and cleaved in the prostate was formulated for clinical use. The i.v. formulation and manufacture of this peptide conjugate posed several challenges. The main issue of the i.v. formulation were chemical and physical stability. The physical stability challenges posed during formulation and manufacture of his peptide conjugate is described herein. A heptapeptide conjugate of doxorubicin was found to aggregate in solution forming large ill defined aggregates (60-1300 nm). In contrast to doxorubicin, the average hydrodynamic diameter measured for this compound by dynamic laser light scattering technique is very large. Increasing concentration of the drug and lowering pH promoted aggregation. We rationalize the difference in the effective hydrodynamic diameter due to hydrogen bonding of the peptide which allows for the formation of large particle sizes relative to doxorubicin. We have also used 600 MHz 1H NMR to assess the aggregation of this compound.

Influence of physicochemical properties and intestinal region on the absorption of 3-fluoro-2-pyrimidylmethyl 3-(2,2-difluoro-2-(2-pyridyl)ethylamino)-6-chloropyrazin-2-one-1-acetamide, a water insoluble thrombin inhibitor, in dogs.

In this paper, we describe the physicochemical and biopharmaceutical properties of 3-fluoro-2-pyrimidylmethyl 3-(2,2-difluoro-2-(2-pyridyl)ethylamino)-6-chloropyrazin-2-one-1-acetamide, a direct thrombin inhibitor (1, Fig. 1). Three crystalline forms were characterized and studies were planned to investigate the absorption characteristics of the three selected crystalline forms. Due to the short half-life observed in preclinical species, regional absorption studies were also conducted to support potential controlled release formulation development. Results showed that the absorption of 1 was dependent on the surface area of the particles administered as suspensions and was independent of the crystal forms. From Caco-2 cell transport studies, it was determined that the permeability of 1 was high. Based on the low aqueous solubility it would be classified as a class 2 compound in the Biopharmaceutics Classification System. Regional absorption results suggested that the compound was absorbed along the gastrointestinal tract in Beagle dogs, however colonic absorption appeared to be reduced by slower dissolution.

Pharmaceutical characterisation and evaluation of cocrystals: Importance of in vitro dissolution conditions and type of coformer.

The objectives of this study were to demonstrate the importance of experimental set-up and type of coformer for the enhanced dissolution properties of cocrystals. Carbamazepine-saccharin and carbamazepine-nicotinamide cocrystals were prepared by the sonic slurry method and characterised with SEM, DSC, XRPD and particle size analysis. Solubility and dissolution testing (closed and open system) were performed in compendial media and media with a physiologically relevant amount of surfactant. Carbamazepine cocrystals (1:1 molar ratio) did not show a difference in the equilibrium solubility compared to the carbamazepine in compendial media but a substantial difference was observed in modified media. In compendial media, a faster dissolution rate was obtained only from the carbamazepine-saccharin cocrystal, whereas in modified media both cocrystals had a substantial higher dissolution compared to carbamazepine. With the selected method a clear difference in the dissolution profiles of each cocrystal is shown, driven by the characteristics of the coformer used. This study demonstrated that improved dissolution of carbamazepine from the cocrystal forms can be revealed only by appropriate selection of in vitro conditions. The characteristics of the coformer define a critical variable for dissolution of pharmaceutical cocrystals with important implications for their in vivo performance.

Mechanism of hydrolysis of a novel indolocarbazole topoisomerase I inhibitor.

The degradation kinetics and reaction product profile of the antitumor agent 1 in aqueous solution was studied. Hydrolysis of the pendant imide ring of 1 is the primary mode of thermal degradation in aqueous solution, and the pH rate profile of 1 has a V-shape indicating that hydrolysis of the imide ring can be catalyzed by either acid or base. Hydrolysis of 1 to the anhydride derivative 3 or the dicarboxylic acid derivative 4 is stepwise and the intermediates 2a and 2b formed by initial hydrolytic attack have been observed under alkaline conditions. An overall mechanism for the hydrolysis of 1 in aqueous solution has been proposed. Extrapolating Arrhenius behavior to the hydrolysis reaction of 1 in aqueous solution maintained at a pH value of 4 suggests an aqueous buffered formulation has sufficient thermal stability to be considered a robust room temperature drug product.

Predicting stoichiometry and structure of solvates.

We demonstrate that crystal structure prediction calculations can be used to predict both the stoichiometry and structure of multicomponent molecular crystals. The methods are used here to determine the structure of a recently discovered acetic acid solvate of theobromine.

Parenteral formulation and thermal degradation pathways of a potent rebeccamycin based indolocarbazole topoisomerase I inhibitor.

The development of a practical and pharmaceutically acceptable parenteral dosage form of 1 is described. A cosolvent formulation strategy was selected to achieve the necessary human dose of 1 for administration via intravenous infusion. The final market formulation of 1 chosen for commercial development and Phase II clinical supplies was the topoisomerase inhibitor dissolved in a 50% aqueous propylene glycol solution vehicle with 50mM citrate buffered to pH 4. The thermal degradation pathways of 1 in this aqueous propylene glycol vehicle in the pH range of 3-5 were determined by relative kinetics and degradation product identification using LC/MS, LC/MS/MS, and NMR analysis. The primary mode of degradation of 1 in this aqueous cosolvent formulation is hydrolysis affording the anhydride 2 (in equilibrium with the dicarboxylic acid 3) and release of the hydrazine diol side chain 11. Subsequent oxidative degradation of 11 occurs in several chemical steps which yield a complicated mixture of secondary reaction products that have been structurally identified.