RESUMEN
BACKGROUND: Melanin is a natural pigment that is considered a promising biomaterial for numerous biotechnological applications across several industries. Melanin has biomedical applications as antimicrobial, anticancer, and antioxidant properties. Additionally, in the pharmaceutical and cosmetic industries, it is used in drug delivery and as a radioprotective agent. Also, melanin has environmental uses in the fields of bioremediation and the food industry. The biosynthesis of melanin pigment is an area of interest for researchers due to its multifunctionality, high compatibility, and biodegradability. Therefore, our present work is the first attempt to characterize and optimize the productivity of melanin pigment from Streptomyces djakartensis NSS-3 concerning its radioprotection and biological properties. RESULTS: Forty isolates of soil actinobacteria were isolated from the Wadi Allaqui Biosphere Reserve, Egypt. Only one isolate, ACT3, produced a dark brown melanin pigment extracellularly. This isolate was identified according to phenotypic properties and molecular phylogenetic analysis as Streptomyces djakartensis NSS-3 with accession number OP912881. Plackett-Burman experimental design (PBD) and response surface methodology (RSM) using a Box-Behnken design (BBD) were performed for optimum medium and culturing conditions for maximum pigment production, resulting in a 4.19-fold improvement in melanin production (118.73 mg/10 mL). The extracted melanin pigment was purified and characterized as belonging to nitrogen-free pyomelanin based on ultraviolet-visible spectrophotometry (UV-VIS), Fourier transform infrared (FT-IR), Raman spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and NMR studies. Purified melanin demonstrated potent scavenging activity with IC50 values of 18.03 µg/mL and revealed high potency as sunscreens (in vitro SPF = 18.5). Moreover, it showed a nontoxic effect on a normal cell line (WI38), while it had a concentration-dependent anticancer effect on HCT116, HEPG, and MCF7 cell lines with IC50 = 108.9, 43.83, and 81.99 µg/mL, respectively. Also, purified melanin had a detrimental effect on the tested MDR bacterial strains, of which PA-09 and SA-04 were clearly more susceptible to melanin compared with other strains with MICs of 6.25 and 25 µg/mL, respectively. CONCLUSION: Our results demonstrated that the newly characterized pyomelanin from Streptomyces djakartensis NSS-3 has valuable biological properties due to its potential photoprotective, antioxidant, anticancer, antimicrobial, and lack of cytotoxic activities, which open up new prospects for using this natural melanin pigment in various biotechnological applications and avoiding chemical-based drugs.
Asunto(s)
Antiinfecciosos , Streptomyces , Melaninas , Antioxidantes/farmacología , Antioxidantes/metabolismo , Espectroscopía Infrarroja por Transformada de Fourier , Filogenia , Antiinfecciosos/farmacología , Antiinfecciosos/metabolismo , Streptomyces/metabolismoRESUMEN
Glass ionomers (GICs), because of their qualities, are in a good position to be modified to resist masticatory stresses as permanent posterior restoration and prevent recurrent caries. The purpose of the present study was to evaluate the effect of adding quaternized chitosan-coated mesoporous silica nanoparticles (HTCC@MSNs) to conventional GIC on its mechanical properties, antimicrobial activity and fluoride release and the effect of 1- and 3-month water aging on the studied properties. HTCC@MSNs was synthesized, added to commercially available conventional GIC at 1%, 3%, and 5% by weight forming three experimental groups and compared with plain GIC as a control group. Flexural strength, modulus, Vickers microhardness and wear volumes were evaluated. Antibacterial activity was tested against Streptococcus mutans and fluoride release in de-ionized water was measured. All properties were evaluated before and after one- and three-month aging (n = 10 specimens per test/per time). Two-way ANOVA was used for statistical analysis. Characterization confirmed successful preparation of HTCC@MSNs. The flexural strength, modulus, hardness and wear resistance of the GICs improved significantly by adding 1-3% HTCC@MSNs, while 5% HTCC@MSNs group showed no significant difference compared to control group. Bacterial inhibition zones and fluoride release increased proportionally to the amount of filler added. Mechanical properties were improved by artificial aging. Fluoride release values, and bacterial inhibition zones decreased with aging for all groups. HTCC@MSNs as a filler with the optimized proportion provides strengthening and antibacterial effect. In addition, aging is an important factor to be considered in evaluating experimental fillers.
Asunto(s)
Quitosano , Nanopartículas , Fluoruros/farmacología , Quitosano/farmacología , Cementos de Ionómero Vítreo/farmacología , Antibacterianos/farmacología , Agua , Ensayo de MaterialesRESUMEN
PURPOSE: Chitosan and its derivatives possess several unique properties relevant in the field of pharmaceutics and medicinal chemistry. This study aimed to evaluate the pharmaceutical performance of an innovative chitosan derivative, methyl acrylate chitosan bearing p-nitrobenzaldehyde (MA*CS*pNBA) Schiff base. METHODS: The antibacterial activity of MA*CS*pNBA was tested against multi-drug resistant (MDR) Gram-negative and Gram-positive bacteria using agar-well diffusion method. Anti-biofilm formation was analyzed using a microtitre plate. Antioxidant assays were performed to assess the scavenging activity of MA*CS*pNBA using DPPH, hydrogen peroxide, superoxide together with its reducing power activity. Anti-inflammatory activity was evaluated by albumin denaturation, membrane stabilization, and proteinase inhibition methods. MA*CS*pNBA was tested for its hemolytic efficiency on human erythrocytes. Cytotoxicity of MA*CS*pNBA was evaluated by MTT assay. RESULTS: MA*CS*pNBA showed a significant performance as an antibacterial candidate against MDR bacteria, anti-biofilm, antioxidant and anti-inflammatory biomaterial, evidencing hemocompatibility and no cytotoxicity. It exhibited a significant negative correlation with biofilm formation by the MDR-PA-09 strain. Biological activities were found to be significantly concentration-dependent. CONCLUSIONS: the newly chitosan derivative MA*CS*pNBA showed to be promising for pharmaceutical applications, expanding the treatment ways toward skin burn infections since it allied excellent antibacterial, anti-biofilm, antioxidant, anti-inflammatory, hemocompatibility and absence of cytotoxic activities.
Asunto(s)
Antibacterianos/farmacología , Antiinflamatorios/farmacología , Antioxidantes/farmacología , Quitosano/farmacología , Animales , Antibacterianos/química , Antiinflamatorios/química , Antioxidantes/química , Bacterias/efectos de los fármacos , Materiales Biocompatibles/química , Materiales Biocompatibles/uso terapéutico , Biopelículas/efectos de los fármacos , Línea Celular , Quitosano/análogos & derivados , Quitosano/química , Humanos , Ratones , Bases de SchiffRESUMEN
Herein, Cetyltrimethyl ammonium bromide (CTAB) intercalated and branched polyhydroxystyrene (BPS) functionalized montmorillonite (MMT) nano-composite (BPS-CTAB-MMT) was developed, characterized, and its potential as an adsorbent was tested in sequestering cationic dyes viz. rhodamine B (RB), crystal violet (CV), and methylene blue (MB) from aqueous environment. N2 adsorption/desorption isotherm showed mesoporous BPS-CTAB-MMT surface with a BET surface area of 273.8â¯m2/g. The appearance of sharp spikes at 2855 and 2925â¯cm-1 (associated with symmetric and asymmetric tensions of C - H bonds) in infra-red spectrum of BPS-CTAB-MMT indicates successful intercalation of MMT with CTAB and functionalization with BPS. The observed crystallite size of BPS-CTAB-MMT was 66â¯nm. Comparatively greater weight loss for BPS-CTAB-MMT (11%) than MMT (9%) was observed during thermogravimetric analysis. The adsorption of dyes on BPS-CTAB-MMT was pH dependent with maximum uptake was observed in the pH range: 5-6. For initial dyes concentration (Co) range: 50-150â¯mg/L, the observed equilibration time for CV was 300â¯min, whereas for RB and MB the equilibration time varied between 300 and 360â¯min. Modeling investigations revealed the applicability of Sips isotherm and pseudo-second-order (PSO) kinetic models to dyes adsorption data. Sips maximum adsorption capacity (qs) values for RB, CV, and MB at 55⯰C were 476.5, 438.7, and 432.7â¯mg/g, respectively. The adsorption of dyes on BPS-CTAB-MMT was thermodynamically favorable. Desorption studies showed 42.1% RB and 41.9% CV recovery with 0.1â¯M NaOH and CH3COCH3, respectively, while only traces of MB were recovered with tested eluents.
Asunto(s)
Silicatos de Aluminio , Bentonita , Compuestos de Cetrimonio , Adsorción , Cetrimonio , Arcilla , Colorantes , CinéticaRESUMEN
Nanofibers and mat-like polyacrylonitrile-polyphenyl/titanium oxide (PAN-Pph./TiO2) with proper electrochemical properties were fabricated via a single-step electrospinning technique for supercapacitor application. Scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), thermogravimetry (TGA), fourier transform infrared (FTIR), X-ray diffraction (XRD) and energy dispersive X-ray (EDX) were conducted to characterize the morphological and chemical composition of all fabricated nanofibers. Furthermore, the electrochemical activity of the fabricated nanofibers for energy storage applications (supercapacitor) was probed by cyclic voltammetry (CV), charge-discharge (CD), and electrochemical impedance spectroscopy (EIS). The PAN-PPh./TiO2 nanofiber electrode revealed a proper specific capacitance of 484 F g-1 at a current density of 11.0 A g-1 compared with PAN (198 F g-1), and PAN-PPh. (352 F g-1) nanofibers using the charge-discharge technique. Furthermore, the PAN-PPh./TiO2 nanofiber electrode displayed a proper energy density of 16.8 Wh kg-1 at a power density (P) of 2749.1 Wkg-1. Moreover, the PAN-PPh./TiO2 nanofiber electrode has a low electrical resistance of 23.72 Ω, and outstanding cycling stability of 79.38% capacitance retention after 3000 cycles.
RESUMEN
Recently, there has been a surge in curiosity regarding the application of biopolymer-derived nanomaterials, primarily attributable to their extensive array of potential applications. In this study, nanocellulose was extracted from algae, biomolecule substances synthesized selenium nanoparticles, and a simple nanocomposite of nanocellulose and nanoselenium was elaborated using nanocellulose as a reducing agent under hydrothermal conditions. These nanocomposite materials have markedly improved properties at low concentrations. Our obtained polymers were characterized using techniques including Fourier-transform infrared spectroscopy, X-ray powder diffraction, Thermo gravimetric analysis (TGA), Scanning electron microscopic (SEM), Energy Dispersive X-ray analysis (EDX), Transmission electron microscopic (TEM), Zeta Potential and Dynamic Light Scattering (DLS). The size of nanocellulose, nanoselenium, and nanocomposite ranged from 35 to 85â¯nm. Antimicrobial investigation of the prepared nanopolymers was tested against Gram-negative bacteria such as Bacillus subtilis ATCC 6633 and Staphylococcus aureus ATCC 6538, Gram-positive bacteria such as Escherichia coli ATCC8739 and Pseudomonas aeruginosa ATCC 90274 and fungi such as Candida albicans ATCC 10221 besides Aspergillus fumigatus. In antibacterial action tests, nanoselenium showed significant efficacy against Bacillus subtilis with a 12â¯mm zone of inhibition, while the nanocomposite eclipsed all microorganisms. Nanocellulose and the nanocomposite were potent against Staphylococcus aureus (14â¯mm and 16â¯mm zones of inhibition, respectively). The nanocomposite showed potential against Escherichia coli and Pseudomonas aeruginosa (17â¯mm and 15â¯mm zones of inhibition, respectively). All polymers effectively inhibited Candida albicans growth (18â¯mm for the nanocomposite). The minimum inhibitory concentrations (MIC) for three polymers have also been established. While nanocellulose displayed a MIC of 62.5⯵g/ml in contradiction to Staphylococcus aureus, nanoselenium demonstrated a significant MIC of 3.95⯵g/ml against Bacillus subtilis. These findings highlight the potential of the nanocomposite (nanocellulose-nanoselenium) as a broad-spectrum antimicrobial polymer.
Asunto(s)
Antiinfecciosos , Celulosa , Pruebas de Sensibilidad Microbiana , Nanocompuestos , Nanocompuestos/química , Celulosa/química , Celulosa/farmacología , Antiinfecciosos/farmacología , Antiinfecciosos/química , Selenio/química , Selenio/farmacología , Sinergismo Farmacológico , Difracción de Rayos X , Antibacterianos/farmacología , Antibacterianos/química , Bacterias/efectos de los fármacos , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Poly L(+) lactic acid (PLLA) has become crucial in the biomedical industry for various uses. The direct polycondensation method was used to prepare Poly L(+) Lactic Acid (PLLA). Different catalysts, including metal oxides and metal halides, were used to test the polymerization technique. The effect of the amount of catalysts and the type of coupling agent were investigated. The effect of reaction time and polymerization solvents was also studied. PLLA was loaded with isosorbide dinitrate utilizing the solvent evaporation process. The synthesized polymer-drug system was evaluated by different means such as FT-IR, TGA, DSC, XRD, entrapment efficiency (E.E), drug loading (D.L), particle size analysis, and zeta potential determination. Studies on in-vitro release using UV light at 227 nm at various pH levels were conducted, and the kinetics of release and cytotoxicity using the sulforhodamine B (SRB) assay on human skin fibroblast cells were examined.
RESUMEN
This research examined the effectiveness of Biobran as a bioactive substance that could potentially improve wound healing. It also looked at how Biobran affects the properties of a nanofibrous scaffold made through coaxial electrospinning. This is the first study exploring the use of Biobran in this context and its interaction with nanofibrous scaffolds. The scaffolds were composed of poly(ε-caprolactone) (PCL) in the shell and various concentrations of Biobran blended with polyvinyl alcohol (PVA) in the core. The properties of the scaffolds were characterized by SEM, TEM, FTIR, XRD, TGA, DSC, stress-strain test, WCA, release test, MTT cytotoxicity assay, wound scratching assay, and the dye exclusion method using trypan blue. The scaffolds loaded with Biobran exhibited a more compact and smooth morphology compared with the scaffold without Biobran. The physical interaction and crystallinity of the polymers in the scaffolds were also affected by Biobran in a concentration-dependent manner. This positively influenced their tensile strength, elongation at break, thermal stability, and hydrophilicity. The porosity, water uptake capacity, and WVTR of the nanofibrous scaffolds are within the optimal ranges for wound healing. The release rate of Biobran, which revealed a biphasic release pattern, decreased with increasing Biobran concentration, resulting in controlled and sustained delivery of Biobran from the nanofiber scaffolds. The cell viability assays showed a dose-dependent effect of Biobran on WISH cells, which might be attributed to the positive effect of Biobran on the physicochemical properties of the nanofibrous scaffolds. These findings suggest that Biobran-loaded core/shell nanofiber scaffolds have a potential application in wound healing as an ideal multifunctional wound dressing.
RESUMEN
The powder form of the new nanofiber composite of poly(acrylonitrile-co-methylmethacrylate) (P(An-MMa)) with zirconium dioxide (ZrO2) was synthesized using the sol-gel method and subsequently converted to a thin film [P(An-MMa)/ZrO2]TF via the physical vapor deposition (PVD) technique. Numerous characterization techniques, including Raman spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and ultraviolet-visible (UV-Vis) optical spectroscopy, were used to characterize [P(An-MMa)/ZrO2]TF. Additionally, using density functional theory (DFT), optimization via time-dependent density functional theory (TD-DFT/DMol3) and Cambridge Serial Total Energy Bundle (TD-DFT/CASTEP) was developed. The TD-DFT calculations accurately matched the observed XRD and Raman spectra and validated the molecular structure of the examined materials. The average crystallite size of [P(An-MMa)/ZrO2]TF, as determined by XRD calculations, is 171.04 nm. The SEM image depicts a one-dimensional morphological structure made up of tightly packed fibrous nanowires or brushes. The optical properties of the films were determined using optical absorbance spectrophotometric results in the 200-850-nm wavelength range. The optical energy bandgaps computed using Tauc's equation for [P(An-MMa)/ZrO2]TF are 2.352 and 2.253 eV, respectively, whereas the isolated molecule of the composite [P(An-MMa)/ZrO2]Iso has a bandgap of 2.415 eV as determined by TD-DFT/DMol3. The optical characteristics predicted by CASTEP in TD-DFT are in good agreement with the experimental values. The investigated large optical energy bandgap nanofiber composite is advantageous for some energy storage applications.
Asunto(s)
Nanofibras , Teoría Funcional de la Densidad , Espectrometría Raman , Difracción de Rayos X , Conductividad EléctricaRESUMEN
The condensation of pyrrole-2,5-dicarbaldehyde (1) with 5-(2-amino-4-phenylthiazol-5-yl)-4-phenylthiazol-2-amine (2) and/or 5-(4-Amino-phenyl)-4-phenylthiazol-2-amine (3) gave new poly(Z)-N-((5-(iminomethyl)-1H-pyrrol-2-yl)methylene)-5-(2-((E)-(5-(iminomethyl)-I-pyrrol-2-yl)methyleneamino)-4-phenylthiazol-5-yl)-4-phenylthiaol-2-amine (P1) and/or poly(E)-N-((5-(iminomethyl)-1H-pyrrol-2-yl)methylene)-5-(4-((E)-(5-(iminomethyl)-1H-pyrrol-2-yl)methyleneamino)phenyl)-4-phenylthiaol-2-amine (P2) as a novel conjugated polymer by microwave irradiation and traditional heating.. It is evident that the microwave irradiation technique quickly raised the molecular weight of polyimines. In addition to quantifying the molecular weight of the resultant polyimines. All the polyimines were characterized using FTIR, XRD, H1NMR, TGA, and DSC. The optical characteristics of polyimine derivatives were investigated using a UV-Vis spectrophotometer. The absorption spectra showed a main absorption band around 372 nm for polyimine (P1) and 381 nm for polyimine (P2). The optical energy was calculated and found to be 2.49 and 2.68 eV. The photoluminescence of the polyimine derivatives was measured and analyzed by spectrofluorometer and Laser photoluminescence experiment and the emission color was studied using CIE graphs. The fluorescence spectra showed an emission peak at 548 nm for polyimine (P1) with yellow green color in CIE graph, while for polyimine (P2) the emission band was located at 440.5 nm with blue color in CIE graph. Photoluminescence quantum yield PLQY was measured for the polyimine P1 and P2 in both liquid and Solid states and indicated the AIE behavior of the polyimines. TD-DFT simulations were applied to the polyimine derivatives where the structures were geometrically optimized and the spectroscopic characterizations were evaluated.
RESUMEN
This work adopted a strategy to use new functional high-performance piezoelectric materials for sustainable energy production in wearable self-powered electrical devices. An innovative modification in electrospinning was used to produce highly aligned nanofibers. In the nanogenerator, the flexible membrane constituents were tunefully combined. The novel composite nanofibers were made of Poly (vinylidene fluoride) PVDF, loaded with ZnO@ZnS core-shell nanoparticles to achieve a non-brittle performance of the hetero nanoparticles and piezoelectric polymer. A nanofiber mat was inserted between two thermoplastic sheets with conductive electrodes for application in wearable electronic devices. Complete spectroscopic analyses were performed to characterize the nanofiber's material composition. It is shown that the addition of 10 wt % ZnO@ZnS core-shell nanoparticles significantly improved the piezoelectric properties of the nanofibers and simultaneously kept them flexible due to the exceedingly resilient nature of the composite. The superior performance of the piezoelectric parameter of the nanofibrous mats was due to the crystallinity (polar ß phase) and surface topography of the mat. The conversion sensitivity of the PVDF device recorded almost 0.091 V/N·mm3, while that of the PVDF-10 wt % ZnO@ZnS composite mat recorded a sensitivity of 0.153 V/N·mm3, which is higher than many flexible nano-generators. These nanogenerators provide a simple, efficient, and cost-effective solution to microelectronic wearable devices.
RESUMEN
Oil and organic pollutants are significant disasters affecting the aquatic ecosystem and human health. A novel nanofiber composite from cellulose acetate/activated carbon (CA/AC) was successfully fabricated by the electrospinning technique. CA/AC nanofiber composites were prepared from 10% (w/v) polymer solutions dissolving in DMA/acetone ratio 1:3 (v/v) with adding three different percentages of AC (3.7, 5.5, and 6.7%) to the total weight of CA. The prepared CA/AC nanofiber composite morphology reveals randomly oriented bead-free fibers with submicron fiber diameter. CA/AC nanofiber composites were further characterized by TGA, DSC, and surface area analysis. Water uptake was investigated for fabricated fibers at different pH. Oil adsorption was conducted in both static (oil only) and dynamic (oil/water) systems to estimate the adsorption capacity of prepared composites to treat heavy and light machine oils. The results showed increased oil adsorption capacity incorporating activated carbon into CA nanofiber mats. The maximum sorption capacity reached 8.3 and 5.5 g/g for heavy and light machine oils obtained by CA/AC5.5 (AC, 5.5%). A higher oil uptake was reported for the CA/AC composite nanofibers and showed a constant sorption capacity after the second recycles in the reusability test. Of isotherm models, the most applicable model was the Freundlich isotherm model. The result of kinetic models proved the fit of the pseudo-second-order kinetic model to the adsorption system.
Asunto(s)
Nanofibras , Contaminación por Petróleo , Humanos , Nanofibras/química , Carbón Orgánico , Ecosistema , Adsorción , AceitesRESUMEN
Green nanotechnology has recently been recognized as a more proper and safer tool for medical applications thanks to its natural reductions with low toxicity and avoidance of injurious chemicals. The macroalgal biomass was used for nanocellulose biosynthesis. Algae are abundant in the environment and have a high content of cellulose. In our study, we extracted parent cellulose from Ulva lactuca where consecutive treatments extracted cellulose to obtain an insoluble fraction rich in cellulose. The extracted cellulose has the same results obtained by matching it with reference cellulose, especially the same Fourier transform infrared (FTIR) and X-Ray diffraction (XRD) analysis peaks. Nanocellulose was synthesized from extracted cellulose with hydrolysis by sulfuric acid. Nanocellulose was examined by Scanning electron microscope (SEM) shown by a slab-like region as Fig. 4a and Energy dispersive X-ray (EDX) to examine the chemical composition. The size of nanocellulose in the range of 50 nm is calculated by XRD analysis. Antibacterial examination of nanocellulose was tested against Gram+ bacteria like Staphylococcus aureus (ATCC6538), Klebsiella pneumonia (ST627), and Gram-negative bacteria such as Escherichia coli (ATCC25922), and coagulase-negative Staphylococci (CoNS) to give 4.06, 4.66, 4.93 and 4.43 cm as respectively. Comparing the antibacterial effect of nanocellulose with some antibiotics and estimating minimal Inhibitory Concentration (MIC) of nanocellulose. We tested the influence of cellulose and nanocellulose on some fungi such as Aspergillus flavus, Candida albicans, and Candida tropicalis. These results demonstrate that nanocellulose could be developed as an excellent solution to these challenges, making nanocellulose extracted from natural algae a very important medical material that is compatible with sustainable development.
Asunto(s)
Celulosa , Ulva , Celulosa/química , Polímeros , Difracción de Rayos X , Antibacterianos/farmacología , Antibacterianos/química , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
The antibacterial activity of a variety of modified poly(methyl methacrylate) Schiff bases against common microbial infections and removal of methylene blue (MB) dye were screened. The Schiff bases were synthesized from the reaction of the modified (PMMA) with vanillin (PMMA)Van and cinnamaldehyde (PMMA)Cin. By using Fourier transformer infrared (FT-IR), X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), the structures of the nanofibers of the synthesized Schiff bases were confirmed. The modified Kirky-Bauer method was used to screen the antibacterial activities of all the obtained materials against various bacterial species, including gram-positive bacterial (Bacillus subtilis (4k1p), Staphylococcus aureus), Gram-negative bacteria (Escherichia coli (7ab3), Pseudomonas aeruginosa). Inhibition zones against gram-positive bacteria ranged in diameter from 7 to 14 mm, whereas for the Gram-negative bacteria, the inhibition zones found to be ranged between 6 and 13 mm. With a minimum bactericidal concentration (MBC) of 8 mg/mL and a minimum inhibitory concentration (MIC) of 2 mg/mL, (PMMA)Van shown the greatest antibacterial activity. Lastly, molecular docking research was done to better understand the interactions between this series' targets and inhibitors for (PMMA)Van and (PMMA)Cin (4k1p and 7ab3). Molecular modeling of these surface-adsorbed polymers indicated that (PMMA)Van binds more strongly with Nitrogen than does (PMMA)Cin through extra hydrogen-bonding interactions. All the developed materials were evaluated for the removal of 0.1 g/L methylene blue dye (MB) from an aqueous solution. The elimination percentage of MB dye ranged from 26.67% by using 0.05 g powder of (PMMA)Cin to 85.63% by employing 0.05 g nanofibers of (PMMA)Van.
Asunto(s)
Polimetil Metacrilato , Bases de Schiff , Polimetil Metacrilato/química , Simulación del Acoplamiento Molecular , Bases de Schiff/química , Espectroscopía Infrarroja por Transformada de Fourier , Azul de Metileno/farmacología , Antibacterianos/farmacología , Antibacterianos/química , Polímeros , Pruebas de Sensibilidad MicrobianaRESUMEN
The present study fabricated regenerated cellulose nanofiber incorporated with activated carbon and functionalized rC/AC3.7 with EDTA reagent for methylene blue (MB) dye removal. The rC/AC3.7 was fabricated by electrospinning cellulose acetate (CA) with activated carbon (AC) solution followed by deacetylation. FT-IR spectroscopy was applied to prove the chemical structures. In contrast, BET, SEM, TGA and DSC analyses were applied to study the fiber diameter and structure morphology, the thermal properties and the surface properties of rC/AC3.7-EDTA. The CA was successfully deacetylated to give regenerated cellulose nanofiber/activated carbon, and then ethylenediaminetetraacetic acid dianhydride was used to functionalize the fabricated nanofiber composite. The rC/AC3.7-EDTA, rC/AC5.5-EDTA and rC/AC6.7-EDTA were tested for adsorption of MB dye with maximum removal percentages reaching 97.48, 90.44 and 94.17%, respectively. The best circumstances for batch absorption experiments of MB dye on rC/AC3.7-EDTA were pH 7, an adsorbent dose of 2 g/L, and a starting MB dye concentration of 20 mg/L for 180 min of contact time, with a maximum removal percentage of 99.14%. The best-fit isotherm models are Temkin and Hasely. The outcome of isotherm models illustrates the applicability of the Langmuir isotherm model (LIM). The maximal monolayer capacity Qm determined from the linear LIM is 60.61 for 0.5 g/L of rC/AC3.7-EDTA. However, based on the results from error function studies, the generalized isotherm model has the lowest accuracy. The data obtained by the kinetic models' studies exposed that the absorption system follows the pseudo-second-order kinetic model (PSOM) throughout the absorption period.
RESUMEN
A significant issue in cancer biology is finding anticancer therapies that effectively kill cancer cells. Through the use of several aldehydes, Schiff bases based on branched poly (p-hydroxy styrene) are created. The branched polymer is first chloroacetylated, then aminated with 1,4-phenylenediamine, and finally, aldehydes are reacted with the aminated polymer to produce the Schiff base compounds. Through the utilization of FTIR, TGA, XRD, NMR, and elemental analysis, all synthesized Schiff-bases are identified and characterized. Further, the antineoplastic potential of all Schiff bases is evaluated against different cancer cell lines. The results gained from this study indicate that the Schiff base polymers have cytotoxic power against cancer cells depending on cancer cell type and this antiproliferation potency is dose-concentration dependent. Importantly, the prepared S1 Schiff-base polymer shows potent cytotoxicity and is able to trigger the apoptosis and reactive oxygen species (ROS) in MCF-7 cells. Further, it downregulates VEGFR protein expression. The Schiff base polymers would have extensive applications in the biological disciplines.
Asunto(s)
Antineoplásicos , Bases de Schiff , Humanos , Bases de Schiff/farmacología , Bases de Schiff/química , Células MCF-7 , Antineoplásicos/farmacología , Antineoplásicos/química , Aldehídos , Polímeros , EstirenosRESUMEN
Dental caries is an infectious disease that is a major concern for dentists. Streptococci and Lactobacilli were long thought to be the primary etiology responsible for caries. Candida albicans with acidogenic and aciduric characteristics has recently been implicated in the onset and progression of cariogenic lesions. Moreover, due to the increased resistance to common antimicrobials, the discovery of innovative candidates is in high demand. Therefore, our study might be the first report that explores the efficacy of glass ionomer cement (GIC) incorporated with a newly modified carboxylated chitosan derivative (CS-MC) against multidrug-resistant (MDR) and/or pandrug resistant (PDR) C. albicans isolated from the oral cavity. In this work, four CS-MC-GIC groups with different concentrations were formulated. Group four (CS-MC-GIC-4) gave a significant performance as an anticandidal agent against selected PDR Candida strain, with an obvious decrease in its cell viability and high antibiofilm activity. It also, enhanced all the mechanical properties and supports cell viability of Vero cells as a nontoxic compound. Moreover, CS-MC-GIC-4 inhibited neuraminidases completely, which might provide a novel mechanism to prevent dental/oral infections. Thus, findings in this study open up new prospect of the utilization of CS-MC-GIC as a novel dental filling material against oral drug-resistant Candida.
RESUMEN
It has been more than one year since the first case of the coronaviruses was infected by COVID-19 in China. The world witnessed three waves of the corona virus till now, and more upcoming is expected, whereas several challenges are presented. Empirical data displayed that the features of the virus effects do vary between the three periods. The severity of the disease, differences in symptoms, attitudes of the people have been reported, although the comparative characteristics of the three waves still keep essentially indefinite. In contrast, the sense of danger toward the cries gradually decreases in most countries. This may be due to some factors, including the approved vaccines, introducing alternative plans from politicians to control and deal with the epidemic, and decreasing the mortality rates. However, the alarm voice started to rise again with the appearance of new variant strains with several mutations in the virus. Several more questions began to be asked without sufficient answers. Mutations in COVID-19 have introduced an extreme challenge in preventing and treating SARS-COV-2. The essential feature for mutations is producing new variants known by high tensmibility, disturbing the viral fitness, and enhancing the virus replication. One of the variants that has emerged recently is the Delta variant (B.1.617.2), which was firstly detected in India. In November 2021, a more ferocious mutant appeared in South Africa, also called omicron (B.1.1.529). These mutants grabbed world attention because of their higher transmissibility than the progenitor variants and spread rapidly. Several information about the virus are still confusing and remains secret. There are eight approved vaccines in the market; however, the investigation race about their effect against reinfection and their role against the new variants is still under investigation. Furthermore, this is the first time vaccinating against COVID-19, so the question remains: Will we need an annual dose of the corona vaccines, and the side effects don't been observed till now?
Asunto(s)
COVID-19/epidemiología , SARS-CoV-2/genética , Vacunación/tendencias , Vacunas contra la COVID-19/genética , Humanos , Pandemias , SARS-CoV-2/patogenicidad , Glicoproteína de la Espiga del Coronavirus/genética , Cobertura de Vacunación/tendenciasRESUMEN
The process of secondary intention wound healing includes long repair and healing time. Electrospun nanofibrous scaffolds have shown potential for wound dressing. Biopolymers have gained much attention due to their remarkable characteristics such as biodegradability, biocompatibility, non-immunogenicity and nontoxicity. This study anticipated to develop a new composite metronidazole (MTZ) immobilized nanofibrous scaffold based on poly (3-hydroxy butyrate) (PHB) and Gelatin (Gel) to be utilized as a novel secondary intention wound healing accelerator. Herein, PHB and Gel were mixed together at different weight ratios to prepare polymer solutions with final concentration of (7%), loaded with two different concentrations 5% (Z1) and 10% (Z2) of MTZ. Nanofibrous scaffolds were obtained by manipulating electrospinning technique. The properties of MTZ immobilized PHB/Gel nanofibrous scaffold were evaluated (SEM, FTIR, TGA, water uptake, contact angle, porosity, mechanical properties and antibacterial activity). Additionally, in vitro cytocompatibility of the obtained nanofibrous scaffolds were assessed by using the cell counting kit-8 (CCK-8 assay). Moreover, in vivo wound healing experiments revealed that the prepared nanofibrous scaffold highly augmented the transforming growth factor (TGF-ß) signaling pathway, moderately suppressed the pro-inflammatory cytokine (IL-6). These results indicate that MTZ immobilized PHB/Gel nanofibrous scaffold significantly boost accelerating secondary intention wound healing.
RESUMEN
Among several types of carbohydrate polymers blend PVA hydrogel membranes used for biomedical applications in particular wound dressings; electrospun nanofibrous membranes have gained increased interest because of their extraordinary features e.g. huge surface area to volume ratio, high porosity, adequate permeability, excellent wound-exudates absorption capacity, architecture similarity with skin ECM and sustained release-profile over long time. In this study, modern perspectives of synthesized/developed electrospun nanofibrous hydrogel membranes based popular carbohydrate polymers blend PVA which recently have been employed for versatile biomedical applications particularly wound dressings, were discussed intensively and compared in detail with traditional fabricated membranes based films, as well. Clinically relevant and advantages of electrospun nanofibrous membranes were discussed in terms of their biocompatibility and easily fabrication and functionalization in different biomedical applications.