Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 46
Filtrar
1.
J Am Chem Soc ; 146(23): 16128-16147, 2024 Jun 12.
Artículo en Inglés | MEDLINE | ID: mdl-38815003

RESUMEN

One of the primary methods for band gap tuning in metal halide perovskites has been halide (I/Br) mixing. Despite widespread usage of this type of chemical substitution in perovskite photovoltaics, there is still little understanding of the structural impacts of halide alloying, with the assumption being the formation of ideal solid solutions. The FASnI3-xBrx (x = 0-3) family of compounds provides the first example where the assumption breaks down, as the composition space is broken into two unique regimes (x = 0-2.9; x = 2.9-3) based on their average structure with the former having a 3D and the latter having an extended 3D (pseudo 0D) structure. Pair distribution function (PDF) analyses further suggest a dynamic 5s2 lone pair expression resulting in increasing levels of off-centering of the central Sn as the Br concentration is increased. These antiferroelectric distortions indicate that even the x = 0-2.9 phase space behaves as a nonideal solid-solution on a more local scale. Solid-state NMR confirms the difference in local structure yielding greater insight into the chemical nature and local distributions of the FA+ cation. In contrast to the FAPbI3-xBrx series, a drastic photoluminescence (PL) quenching is observed with x ≥ 1.9 compounds having no observable PL. Our detailed studies attribute this quenching to structural transitions induced by the distortions of the [SnBr6] octahedra in response to stereochemically expressed lone pairs of electrons. This is confirmed through density functional theory, having a direct impact on the electronic structure.

2.
J Am Chem Soc ; 145(29): 15997-16014, 2023 Jul 26.
Artículo en Inglés | MEDLINE | ID: mdl-37432784

RESUMEN

The alloyed lead/tin (Pb/Sn) halide perovskites have gained significant attention in the development of tandem solar cells and other optoelectronic devices due to their widely tunable absorption edge. To gain a better understanding of the intriguing properties of Pb/Sn perovskites, such as their anomalous bandgap's dependence on stoichiometry, it is important to deepen the understanding of their chemical behavior and local structure. Herein, we investigate a series of two-dimensional Ruddlesden-Popper (RP) and Dion-Jacobson (DJ) phase alloyed Pb/Sn bromide perovskites using butylammonium (BA) and 3-(aminomethyl)pyridinium (3AMPY) as the spacer cations: (BA)2(MA)n-1PbxSnn-xBr3n+1 (n = 1-3) and (3AMPY)(MA)n-1PbxSnn-xBr3n+1 (n = 1-3) through a solution-based approach. Our results show that the ratio and site preference of Pb/Sn atoms are influenced by the layer thickness (n) and spacer cations (A'), as determined by single-crystal X-ray diffraction. Solid-state 1H, 119Sn, and 207Pb NMR spectroscopy analysis shows that the Pb atoms prefer the outer layers in n = 3 members: (BA)2(MA)PbxSnn-xBr10 and (3AMPY)(MA)PbxSnn-xBr10. Layered 2D DJ alloyed Pb/Sn bromide perovskites (3AMPY)(MA)n-1PbxSnn-xBr3n+1 (n = 1-3) demonstrate much narrower optical band gaps, lower energy PL emission peaks, and longer carrier lifetimes compared to those of RP analogs. Density functional theory calculations suggest that Pb-rich alloys (Pb:Sn ∼4:1) for n = 1 compounds are thermodynamically favored over 50:50 (Pb:Sn ∼1:1) compositions. From grazing-incidence wide-angle X-ray scattering (GIWAXS), we see that films in the RP phase orient parallel to the substrate, whereas for DJ cases, random orientations are observed relative to the substrate.

3.
J Am Chem Soc ; 144(9): 3902-3912, 2022 Mar 09.
Artículo en Inglés | MEDLINE | ID: mdl-35213137

RESUMEN

Three-dimensional (3D) halide perovskites have attracted enormous research interest, but the choice of the A-site cations is limited by the Goldschmidt tolerance factor. In order to accommodate cations that lie outside the acceptable range of the tolerance factor, low-dimensional structures usually form. To maintain the favorable 3D connection, the links among the metal-halide octahedra need to be rearranged to fit the large cations. This can result in a departure from the proper corner-sharing perovskite architectures and lead to distinctly different perovskitoid motifs with edge- and face-sharing. In this work, we report four new 3D bromide perovskitoids incorporating linear organic diammonium cations, A'Pb2Br6 (A' is a +2 cation). We propose a rule that can guide the further expansion of this class of compounds, analogous to the notion of Goldschmidt tolerance factor widely adopted for 3D AMX3 perovskites. The fundamental building blocks in A'Pb2Br6 consist of two edge-shared octahedra, which are then connected by corner-sharing to form a 3D network. Different compounds adopt different structural motifs, which can be transformed from one to another by symmetry operations. Electronic structure calculations suggest that they are direct bandgap semiconductors, with relatively large band dispersions created by octahedra connected by corner-sharing. They exhibit similar electronic band structures and dynamic lattice characteristics to the regular 3D AMX3 perovskites. Structures with smaller Pb-Br-Pb angles and larger octahedra distortion exhibit broad photoluminescence at room temperature. The emerging structure-property relationships in these 3D perovskitoids set the foundation for designing and investigating these compounds for a variety of optoelectronic applications.

4.
J Am Chem Soc ; 144(14): 6390-6409, 2022 Apr 13.
Artículo en Inglés | MEDLINE | ID: mdl-35378979

RESUMEN

The nature of the organic cation in two-dimensional (2D) hybrid lead iodide perovskites tailors the structural and technological features of the resultant material. Herein, we present three new homologous series of (100) lead iodide perovskites with the organic cations allylammonium (AA) containing an unsaturated C═C group and iodopropylammonium (IdPA) containing iodine on the organic chain: (AA)2MAn-1PbnI3n+1 (n = 3-4), [(AA)x(IdPA)1-x]2MAn-1PbnI3n+1 (n = 1-4), and (IdPA)2MAn-1PbnI3n+1 (n = 1-4), as well as their perovskite-related substructures. We report the in situ transformation of AA organic layers into IdPA and the incorporation of these cations simultaneously into the 2D perovskite structure. Single-crystal X-ray diffraction shows that (AA)2MA2Pb3I10 crystallizes in the space group P21/c with a unique inorganic layer offset (0, <1/2), comprising the first example of n = 3 halide perovskite with a monoammonium cation that deviates from the Ruddlesden-Popper (RP) halide structure type. (IdPA)2MA2Pb3I10 and the alloyed [(AA)x(IdPA)1-x]2MA2Pb3I10 crystallize in the RP structure, both in space group P21/c. The adjacent I···I interlayer distance in (AA)2MA2Pb3I10 is ∼5.6 Å, drawing the [Pb3I10]4- layers closer together among all reported n = 3 RP lead iodides. (AA)2MA2Pb3I10 presents band-edge absorption and photoluminescence (PL) emission at around 2.0 eV that is slightly red-shifted in comparison to (IdPA)2MA2Pb3I10. The band structure calculations suggest that both (AA)2MA2Pb3I10 and (IdPA)2MA2Pb3I10 have in-plane effective masses around 0.04m0 and 0.08m0, respectively. IdPA cations have a greater dielectric contribution than AA. The excited-state dynamics investigated by transient absorption (TA) spectroscopy reveal a long-lived (∼100 ps) trap state ensemble with broad-band emission; our evidence suggests that these states appear due to lattice distortions induced by the incorporation of IdPA cations.

5.
Proc Natl Acad Sci U S A ; 116(1): 58-66, 2019 01 02.
Artículo en Inglés | MEDLINE | ID: mdl-30563858

RESUMEN

In the fast-evolving field of halide perovskite semiconductors, the 2D perovskites (A')2(A) n-1M n X3n+1 [where A = Cs+, CH3NH3+, HC(NH2)2+; A' = ammonium cation acting as spacer; M = Ge2+, Sn2+, Pb2+; and X = Cl-, Br-, I-] have recently made a critical entry. The n value defines the thickness of the 2D layers, which controls the optical and electronic properties. The 2D perovskites have demonstrated preliminary optoelectronic device lifetime superior to their 3D counterparts. They have also attracted fundamental interest as solution-processed quantum wells with structural and physical properties tunable via chemical composition, notably by the n value defining the perovskite layer thickness. The higher members (n > 5) have not been documented, and there are important scientific questions underlying fundamental limits for n To develop and utilize these materials in technology, it is imperative to understand their thermodynamic stability, fundamental synthetic limitations, and the derived structure-function relationships. We report the effective synthesis of the highest iodide n-members yet, namely (CH3(CH2)2NH3)2(CH3NH3)5Pb6I19 (n = 6) and (CH3(CH2)2NH3)2(CH3NH3)6Pb7I22 (n = 7), and confirm the crystal structure with single-crystal X-ray diffraction, and provide indirect evidence for "(CH3(CH2)2NH3)2(CH3NH3)8Pb9I28" ("n = 9"). Direct HCl solution calorimetric measurements show the compounds with n > 7 have unfavorable enthalpies of formation (ΔHf), suggesting the formation of higher homologs to be challenging. Finally, we report preliminary n-dependent solar cell efficiency in the range of 9-12.6% in these higher n-members, highlighting the strong promise of these materials for high-performance devices.

6.
Inorg Chem ; 60(22): 17123-17131, 2021 Nov 15.
Artículo en Inglés | MEDLINE | ID: mdl-34719229

RESUMEN

The association of the electron acceptor 4,4'-amino-bipyridinium (AmV2+) dication and BiI3 in an acidic solution affords three organic-inorganic hybrid materials, (AmV)3(BiI6)2 (1), (AmV)2(Bi4I16) (2), and (AmV)BiI5 (3), whose structures are based on isolated BiI63- and Bi4I164- anion clusters in 1 and 2, respectively, and on a one-dimensional (1D) chain of trans-connected corner-sharing octahedra in 3. In contrast with known methylviologen-based hybrids, these compounds are more soluble in polar solvents, allowing thin film formation by spin-coating. (AmV)BiI5 exhibits a broad absorption band in the visible region leading to an optical bandgap of 1.54 eV and shows a PV effect as demonstrated by a significant open-circuit voltage close to 500 mV. The electronic structure of the three compounds has been investigated using first-principles calculations based on density functional theory (DFT). Unexpectedly, despite the trans-connected corner-shared octahedra, for (AmV)BiI5, the valence state shows no coupling along the wire direction, leading to a high effective mass for holes, while in contrast, the strong coupling between Bi 6px orbitals in the same direction at the conduction band minimum suggests excellent electron transport properties. This contributes to the low current output leading to the low efficiency of perovskite solar cells based on (AmV)BiI5. Further insight is provided for trans- and cis-MI5 1D model structures (M = Bi or Pb) based on DFT investigations.

7.
J Am Chem Soc ; 142(18): 8342-8351, 2020 May 06.
Artículo en Inglés | MEDLINE | ID: mdl-32279505

RESUMEN

Hybrid layered halide perovskites have achieved impressive performance in optoelectronics. New structural types in the two-dimensional (2D) halide system such as the Dion-Jacobson phases have attracted wide research attention due to the short interlayer distance and unique layer orientation that facilitate better charge-transport and higher stability in optoelectronic devices. Here, we report the first solid solution series incorporating both A and A' cations in the 2D Dion-Jacobson family, with the general formula (A')(A)Pb2Br7 ((A' = 3-(aminomethyl)piperidinium (3AMP) and 4-(aminomethyl)piperidinium) (4AMP); A = methylammonium (MA) and formamidinium (FA)). Mixing the spacing A' cations and perovskitizer A cations generates the new (3AMP)a(4AMP)1-a(FA)b(MA)1-bPb2Br7 perovskites. The crystallographically refined crystal structures using single-crystal X-ray diffraction data reveal that the distortion of the inorganic framework is heavily influenced by the degree of A' and A alloying. A rising fraction of 4AMP in the structure, decreases the Pb-Br-Pb angles, making the framework more distorted. On the contrary, higher FA fractions increase the Pb-Br-Pb angles. This structural evolution fine-tunes the optical properties where the larger the Pb-Br-Pb angle, the narrower the band gap. The photoluminescence emission energy mirrors this trend. Raman spectroscopy reveals a highly dynamical lattice similar to MAPbBr3 and consistent with the local distortion environment of the [Pb2Br7] framework. Density functional theory (DFT) calculations of the electronic structures reveal the same trend as the experimental results where (3AMP)(FA)Pb2Br7 has the smallest band gap while (4AMP)(MA)Pb2Br7 has the largest band gap. The structural effects from solely the organic cations in the 2D system highlight the importance of understanding the high sensitivity of the optoelectronic properties on the structural tuning in this broad class of materials.

8.
J Am Chem Soc ; 142(19): 9028-9038, 2020 May 13.
Artículo en Inglés | MEDLINE | ID: mdl-32283025

RESUMEN

The optical and light emission properties of tin and lead halide perovskites are remarkable because of the robust room-temperature (RT) performance, broad wavelength tunability, high efficiency, and good quenching resistance to defects. These highly desirable attributes promise to transform current light-emitting devices, phosphors, and lasers. One disadvantage in most of these materials is the sensitivity to moisture. Here, we report a new air-stable one-dimensional (1D) hybrid lead-free halide material (DAO)Sn2I6 (DAO, 1,8-octyldiammonium) that is resistant to water for more than 15 h. The material exhibits a sharp optical absorption edge at 2.70 eV and a strong broad orange light emission centered at 634 nm, with a full width at half-maximum (fwhm) of 142 nm (0.44 eV). The emission has a long photoluminescence (PL) lifetime of 582 ns, while the intensity is constant over a very broad temperature range (145-415 K) with a photoluminescence quantum yield (PLQY) of at least 20.3% at RT. Above 415 K the material undergoes a structural phase transition from monoclinic (C2/c) to orthorhombic (Ibam) accompanied by a red shift in the band gap and a quench in the photoluminescence emission. Density functional theory calculations support the trend in the optical properties and the 1D electronic nature of the structure, where the calculated carrier effective masses along the inorganic chain are significantly lower than those perpendicular to the chain. Thin films of the compound readily fabricated from solutions exhibit the same optical properties, but with improved PLQY of 36%, for a 60 nm thick film, among the highest reported for lead-free low-dimensional 2D and 1D perovskites and metal halides.

9.
J Am Chem Soc ; 142(14): 6625-6637, 2020 Apr 08.
Artículo en Inglés | MEDLINE | ID: mdl-32176495

RESUMEN

Large organic A cations cannot stabilize the 3D perovskite AMX3 structure because they cannot be accommodated in the cubo-octhedral cage (do not follow the Goldschmidt tolerance factor rule), and they generally template low-dimensional structures. Here we report that the large dication aminomethylpyridinium (AMPY) can template novel 3D structures which resemble conventional perovskites. They have the formula (xAMPY)M2I6 (x = 3 or 4, M = Sn2+ or Pb2+) which is double of the AMX3 formula. However, because of the steric requirement of the Goldschmidt tolerance factor rule, it is impossible for (xAMPY)M2I6 to form proper perovskite structures. Instead, a combination of corner-sharing and edge-sharing connectivity is adopted in these compounds leading to the new 3D structures. DFT calculations reveal that the compounds are indirect band gap semiconductors with direct band gaps presenting at slightly higher energies and dispersive electronic bands. The indirect band gaps of the Sn and Pb compounds are ∼1.7 and 2.0 eV, respectively, which is slightly higher than the corresponding AMI3 3D perovskites. The Raman spectra for the compounds are diffuse, with a broad rising central peak at very low frequencies around 0 cm-1, a feature that is characteristic of dynamical lattices, high anharmonicity, and dissipative vibrations very similar to the 3D AMX3 perovskites. Devices of (3AMPY)Pb2I6 crystals exhibit clear photoresponse under ambient light without applied bias, reflecting a high carrier mobility (µ) and long carrier lifetime (τ). The devices also exhibit sizable X-ray generated photocurrent with a high µτ product of ∼1.2 × 10-4 cm2 /V and an X-ray sensitivity of 207 µC·Gy-1·cm-2.

10.
J Am Chem Soc ; 141(27): 10661-10676, 2019 Jul 10.
Artículo en Inglés | MEDLINE | ID: mdl-31246449

RESUMEN

Two-dimensional (2D) hybrid halide perovskites are promising in optoelectronic applications, particularly solar cells and light-emitting devices (LEDs), and for their increased stability as compared to 3D perovskites. Here, we report a new series of structures using propylammonium (PA+), which results in a series of Ruddlesden-Popper (RP) structures with the formula (PA)2(MA)n-1PbnI3n+1 (n = 3, 4) and a new homologous series of "step-like" (SL) structures where the PbI6 octahedra connect in a corner- and face-sharing motif with the general formula (PA)2m+4(MA)m-2Pb2m+1I7m+4 (m = 2, 3, 4). The RP structures show a blue-shift in bandgap for decreasing n (1.90 eV for n = 4 and 2.03 eV for n = 3), while the SL structures have an even greater blue-shift (2.53 eV for m = 4, 2.74 eV for m = 3, and 2.93 eV for m = 2). DFT calculations show that, while the RP structures are electronically 2D quantum wells, the SL structures are electronically 1D quantum wires with chains of corner-sharing octahedra "insulated" by blocks of face-sharing octahedra. Dark measurements for RP crystals show high resistivity perpendicular to the layers (1011 Ω cm) but a lower resistivity parallel to them (107 Ω cm). The SL crystals have varying resistivity in all three directions, confirming both RP and SL crystals' utility as anisotropic electronic materials. The RP structures show strong photoresponse, whereas the SL materials exhibit resistivity trends that are dominated by ionic transport and no photoresponse. Solar cells were made with n = 3 giving an efficiency of 7.04% (average 6.28 ± 0.65%) with negligible hysteresis.

11.
J Am Chem Soc ; 141(32): 12880-12890, 2019 Aug 14.
Artículo en Inglés | MEDLINE | ID: mdl-31313919

RESUMEN

Two-dimensional (2D) halide perovskites have extraordinary optoelectronic properties and structural tunability. Among them, the Dion-Jacobson phases with the inorganic layers stacking exactly on top of each other are less explored. Herein, we present the new series of 2D Dion-Jacobson halide perovskites, which adopt the general formula of A'An-1PbnI3n+1 (A' = 4-(aminomethyl)pyridinium (4AMPY), A = methylammonium (MA), n = 1-4). By modifying the position of the CH2NH3+ group from 4AMPY to 3AMPY (3AMPY = 3-(aminomethyl)pyridinium), the stacking of the inorganic layers changes from exactly eclipsed to slightly offset. The perovskite octahedra tilts are also different between the two series, with the 3AMPY series exhibiting smaller bandgaps than the 4AMPY series. Compared to the aliphatic cation of the same size (AMP = (aminomethyl)piperidinium), the aromatic spacers increase the rigidity of the cation, reduce the interlayer spacing, and decrease the dielectric mismatch between inorganic layer and the organic spacer, showing the indirect but powerful influence of the organic cations on the structure and consequently on the optical properties of the perovskite materials. All A'An-1PbnI3n+1 compounds exhibit strong photoluminescence (PL) at room temperature. Preliminary solar cell devices based on the n = 4 perovskites as absorbers of both series exhibit promising performances, with a champion power conversion efficiency (PCE) of 9.20% for (3AMPY)(MA)3Pb4I13-based devices, which is higher than the (4AMPY)(MA)3Pb4I13 and the corresponding aliphatic analogue (3AMP)(MA)3Pb4I13-based ones.

12.
J Chem Phys ; 151(23): 234704, 2019 Dec 21.
Artículo en Inglés | MEDLINE | ID: mdl-31864242

RESUMEN

The electronic structure evolution of deficient halide perovskites with a general formula (A,A')1+xM1-xX3-x was investigated using the density functional theory. The focus is placed on characterization of changes in the bandgap, band alignment, effective mass, and optical properties of deficient perovskites at various concentrations of defects. We uncover unusual electronic properties of the defect corresponding to a M-X vacancy filled with an A' cation. This defect "repels" electrons and holes producing no trap states and, in moderate quantities (x ≤ 0.1), does not hinder charge transport properties of the material. This behavior is rationalized using a confinement model and provides additional insight to the defect tolerance of halide perovskites.

13.
Nano Lett ; 18(9): 5603-5609, 2018 09 12.
Artículo en Inglés | MEDLINE | ID: mdl-30086221

RESUMEN

Surface states are ubiquitous to semiconductors and significantly impact the physical properties and, consequently, the performance of optoelectronic devices. Moreover, surface effects are strongly amplified in lower dimensional systems such as quantum wells and nanostructures. Layered halide perovskites (LHPs) are two-dimensional solution-processed natural quantum wells where optoelectronic properties can be tuned by varying the perovskite layer thickness n, i.e., the number of octahedra spanning the layer. They are efficient semiconductors with technologically relevant stability. Here, a generic elastic model and electronic structure modeling are applied to LHPs heterostructures with various layer thickness. We show that the relaxation of the interface strain is triggered by perovskite layers above a critical thickness. This leads to the release of the mechanical energy arising from the lattice mismatch, which nucleates the surface reorganization and may potentially induce the formation of previously observed lower energy edge states. These states, which are absent in three-dimensional perovskites are anticipated to play a crucial role in the design of LHPs for optoelectronic systems.

14.
J Am Chem Soc ; 140(38): 12226-12238, 2018 09 26.
Artículo en Inglés | MEDLINE | ID: mdl-30169031

RESUMEN

Low-dimensional halide perovskites have recently attracted intense interest as alternatives to the three-dimensional (3D) perovskites because of their greater tunability and higher environmental stability. Herein, we present the new homologous 2D series (NH3C mH2 mNH3)(CH3NH3) n-1Pb nI3 n+1 ( m = 4-9; n = 1-4), where m represents the carbon-chain number and n equals layer-thickness number. Multilayer ( n > 1) 2D perovskites incorporating diammonium cations were successfully synthesized by the solid-state grinding method for m = 4 and 6 and by the solution method for m = 7-9. Structural characterization by single-crystal X-ray diffraction for the m = 8 and m = 9 series ( n = 1-4) reveals that these compounds adopt the Cc space group for even n members and Pc for odd n members. The optical bandgaps are 2.15 eV for two-layer ( n = 2), 2.01 eV for three-layer ( n = 3), and 1.90 eV for four-layer ( n = 4). The materials exhibit excellent solution processability, and casting thin-films of the n = 3 members was successfully accomplished. The films show a clear tendency for the higher- m members to have preferred orientation on the glass substrate, with m = 8 exhibiting almost perfect vertical layer orientation and m = 9 displaying both vertical and parallel layer orientation, as confirmed by grazing-incidence wide-angle X-ray scattering (GIWAXS) measurements. The vertical layer orientation for the (NH3C8H16NH3)(CH3NH3)2Pb3I10 member results in the best thermal, light, and air stability within this series, thus showing excellent potential for solar cell applications.

15.
J Am Chem Soc ; 140(40): 13078-13088, 2018 Oct 10.
Artículo en Inglés | MEDLINE | ID: mdl-30212624

RESUMEN

Hybrid organic-inorganic halide perovskites are under intense investigations because of their astounding physical properties and promises for optoelectronics. Lead bromide and chloride perovskites exhibit intrinsic white-light emission believed to arise from self-trapped excitons (STEs). Here, we report a series of new structurally diverse hybrid lead bromide perovskites that have broad-band emission at room temperature. They feature Pb/Br structures which vary from 1D face-sharing structures to 3D corner- and edge-sharing structures. Through single-crystal X-ray diffraction and low-frequency Raman spectroscopy, we have identified the local distortion level of the octahedral environments of Pb2+ within the structures. The band gaps of these compounds range from 2.92 to 3.50 eV, following the trend of "corner-sharing < edge-sharing < face-sharing". Density functional theory calculations suggest that the electronic structure is highly dependent on the connectivity mode of the PbBr6 octahedra, where the edge- and corner-sharing 1D structure of (2,6-dmpz)3Pb2Br10 exhibits more disperse bands and smaller band gap (2.49 eV) than the face-sharing 1D structure of (hep)PbBr3 (3.10 eV). Using photoemission spectroscopy, we measured the energies of the valence band of these compounds and found them to remain almost constant, while the energy of conduction bands varies. Temperature-dependent PL measurements reveal that the 2D and 3D compounds have narrower PL emission at low temperature (∼5 K), whereas the 1D compounds have both free exciton emission and STE emission. The 1D compound (2,6-dmpz)3Pb2Br10 has the highest photoluminescence quantum yield of 12%, owing to its unique structure that allows efficient charge carrier relaxation and light emission.

16.
Phys Chem Chem Phys ; 20(14): 9638-9643, 2018 Apr 04.
Artículo en Inglés | MEDLINE | ID: mdl-29582030

RESUMEN

As a result of early theoretical predictions, evidence for the Rashba or Dresselhaus effect in hybrid perovskites has recently attracted several experimental investigations, motivated by possible applications in spin-orbitronics. For instance, a large Rashba splitting has recently been reported for the (001) surface of CH3NH3PbBr3. This effect is forbidden in the bulk material since both low-temperature and room-temperature crystal structures present inversion symmetry. Here we investigate the effects of two (001) nanoscale surface reconstructions of CH3NH3PbBr3 using first-principles approaches based on density functional theory (DFT). The two experimental reconstructions are related to different orientations of MA cations at the surface, defining zigzag and dimer phases. The impact of these structural transformations on their electronic structures is thoroughly investigated. Whereas calculations reveal the occurrence of surface-induced Rashba effect, its amplitude is considerably smaller than the experimentally reported value, in agreement with other experimental investigations and leading to the conclusion that mesoscale surface polar domains and/or surface defects may result from sample preparation.

17.
J Am Chem Soc ; 139(45): 16297-16309, 2017 11 15.
Artículo en Inglés | MEDLINE | ID: mdl-29095597

RESUMEN

We present the new homologous series (C(NH2)3)(CH3NH3)nPbnI3n+1 (n = 1, 2, 3) of layered 2D perovskites. Structural characterization by single-crystal X-ray diffraction reveals that these compounds adopt an unprecedented structure type, which is stabilized by the alternating ordering of the guanidinium and methylammonium cations in the interlayer space (ACI). Compared to the more common Ruddlesden-Popper (RP) 2D perovskites, the ACI perovskites have a different stacking motif and adopt a higher crystal symmetry. The higher symmetry of the ACI perovskites is expressed in their physical properties, which show a characteristic decrease of the bandgap with respect to their RP perovskite counterparts with the same perovskite layer thickness (n). The compounds show a monotonic decrease in the optical gap as n increases: Eg = 2.27 eV for n = 1 to Eg = 1.99 eV for n = 2 and Eg = 1.73 eV for n = 3, which show slightly narrower gaps compared to the corresponding RP perovskites. First-principles theoretical electronic structure calculations confirm the experimental optical gap trends suggesting that the ACI perovskites are direct bandgap semiconductors with wide valence and conduction bandwidths. To assess the potential of the ACI perovskites toward solar cell applications, we studied the (C(NH2)3)(CH3NH3)3Pb3I10 (n = 3) compound. Compact thin films from the (C(NH2)3)(CH3NH3)3Pb3I10 compound with excellent surface coverage can be obtained from the antisolvent dripping method. Planar photovoltaic devices from optimized ACI perovskite films yield a power-conversion-efficiency of 7.26% with a high open-circuit voltage of ∼1 V and a striking fill factor of ∼80%.

18.
Nanotechnology ; 25(46): 465703, 2014 Nov 21.
Artículo en Inglés | MEDLINE | ID: mdl-25355047

RESUMEN

New advances in single-atom manipulation are leading to the creation of atomic structures on H-passivated Si surfaces with functionalities important for the development of atomic and molecular based technologies. We perform total-energy and electron-transport calculations to reveal the properties and understand the features of atomic wires crafted by H removal from the surface. The presence of dopants radically change the wire properties. Our calculations show that dopants have a tendency to approach the dangling-bond wires, and in these conditions, transport is enhanced and spin selective. These results have important implications in the development of atomic-scale spintronics showing that boron, and to a lesser extent phosphorous, convert the wires in high-quality spin filters.

19.
Phys Chem Chem Phys ; 16(45): 25182-90, 2014 Dec 07.
Artículo en Inglés | MEDLINE | ID: mdl-25331688

RESUMEN

The electronic surface states and dielectric self-energy profiles in CdSe colloidal nanoscale platelets are explored by means of an original ab initio approach. In particular, we show how the different coatings deeply modify the quantum and dielectric confinement in CdSe nanoscale platelets. Molecular coating leads to an electronic band gap free of electronic surface states as well as an optimal surface coverage. The reduced blinking in CdSe nanoscale platelets is discussed. The theoretical method here proposed allows one to go beyond the popular empirical description of abrupt dielectric interfaces by explicitly describing the nanoplatelet surface morphology and polarisability at the atomic level. This theoretical study open the way toward more precise description of the dielectric confinement effect in any hybrid system exhibiting 2D electronic properties.

20.
Nano Lett ; 13(3): 1192-5, 2013 Mar 13.
Artículo en Inglés | MEDLINE | ID: mdl-23432608

RESUMEN

Surface-state engineering strategies for atomic-size interconnects on H-passivated Si(100) surfaces are explored. The well-known simple interconnect formed by removing H-atoms from one of the Si atoms per dimer of a dimer row along the Si(100) surface is poorly conducting. This is because one-dimensional-like instabilities open electronic gaps. Here, we explore two strategies to reduce the instabilities: spacing the dangling bonds with H atoms and changing the geometry by increasing the lateral size of the wires. The resulting wires are evaluated using density functional theory. Surprisingly, zigzag dangling-bond wires attain atomically confined conduction properties comparable with the conduction of free-standing metallic monatomic wires. These results hint at band-engineering strategies for the development of electronically driven nanocircuits.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA