Application of nanopesticides and its toxicity evaluation through Drosophila model.

Insects feed on plants and cause the growth of plants to be restricted. Moreover, the application of traditional pesticides causes harmful effects on non-target organisms and poses serious threats to the environment. The use of conventional pesticides has negative impacts on creatures that are not the intended targets. It also presents significant risks to the surrounding ecosystem. Insects that are exposed to these chemicals eventually develop resistance to them. This review could benefit researcher for future development of nanopesticides research. This is because a holistic approach has been taken to describe the multidimensional properties of nanopesticides, health and environmental concerns and its possible harmful effects on non-target organisms and physiochemical entities. The assessment of effects of the nanopesticides is also being discussed through the drosophotoxicology. The future outlooks have been suggested to take a critical analysis before commercialization or formulation of the nanopesticides.

Potentials of roots, stems, leaves, flowers, fruits, and seeds extract for the synthesis of silver nanoparticles.

Silver nanoparticles (AgNPs) have gained significant attention in various applications due to their unique properties that differ from bulk or macro-sized counterparts. In the advancement of nanotechnology, a reliable, non-toxic, and eco-friendly green synthesis has widely been developed as an alternative method for the production of AgNPs, overcoming limitations associated with the traditional physical and chemical methods. Green synthesis of AgNPs involves the utilization of biological sources including plant extracts with silver salt as the precursor. The potential of phytochemicals in plant extracts serves as a reducing/capping and stabilizing agent to aid in the bio-reduction of Ag+ ions into a stable nanoform, Ag0. This review provides insights into the potentials of various plant parts like root, stem, leaf, flower, fruit, and seed extracts that have been extensively reported for the synthesis of AgNPs.

Ca-doped ZnO nanoparticles for MB dye degradation and adsorptive removal of tinidazole.

Industrial dye degradation involves several processes by which dyes are broken down, ideally into innocuous products. Methylene blue (MB) is one of the most commonly employed dyes in the textile industry and is released into water in routine industry processes. These discharges lead to creating a nocuous nature for humans and animals. Drugs are also discharged into water bodies from various pharmaceutical industries. In these two contexts, in the present work, the green synthesis of calcium-doped zinc oxide nanoparticles (Ca-doped ZnO NPs) is achieved using the aqueous peel extract of Citrus limetta by the solution combustion technique. The structural, morphological, and optical properties of the synthesized Ca-doped ZnO NPs are investigated using XRD, FTIR, SEM, EDX, and UV-visible spectroscopy. The prepared NPs were subjected to photocatalytic degradation of MB dye under visible-light illumination, which shows ~ 95% dye degradation. The synthesized Ca-doped ZnO NPs were also employed to adsorb tinidazole (TDZ), a nitroimidazole antibiotic, from water samples. An excellent adsorptive capacity of the NPs was observed for selectively adsorbing the TDZ ~ 96.2%. The drug TDZ was found to have pseudo-second-order kinetics. The catalyst recycling proved its repeatability; removal of the dye reached up to 92% after three successive usages. Therefore, using waste Citrus limetta peel extract, the multifunctional Ca-doped ZnO NPs were synthesized, which maintained effective adsorption potential and photocatalytic abilities and could be used as an effective material for environmental remediation.

Determination of urinary spermine using controlled dissolution of polysulfide modified gold electrode.

Spermine (SPM) is considered a biomarker for prostate cancer and detecting it becomes highly challenging due to its electro- and optical-inactive nature. SPM has a tendency to interact with groups such as phosphates and sulfides to form macrocyclic arrangements known as nuclear aggregates of polyamines. Using this tendency, an electrochemical sensor has been developed using a polysulfide (PS) modified Au electrode (PS@Au electrode). PS has been synthesized from elemental sulfur by hydrothermal method and characterized using UV-Vis, fluorescence, FTIR, SEM, and XPS analyses. The PS@Au electrode was employed for electrochemical sensing of SPM. In the presence of SPM, a decrease in gold oxide reduction current was noted which is proportional to the concentration of SPM. The decrease in gold oxide reduction (0.5 V) current was attributed to the complexing nature of SPM-PS at the electrode interface. The reason for the decrease in current has been substantiated using XRF, XPS, and spectroelectrochemical studies. Under the optimized conditions, the PS@Au electrode exhibited a linear range of 1.55-250 µM with LOD of 0.511 ± 0.02 µM (3σ). The electrochemical strategy for SPM sensing exhibited better selectivity even in the presence of possible interferents. The selectivity stems from the selective interaction of SPM with PS on the Au electrode surface; the tested amino acids, and other molecules do not complex with PS and hence they could not interfere. The PS@Au electrode has been subjected to the determination of SPM in artificial urine samples and exhibited outstanding performance in the synthetic sample.

Recent developments in tuning the efficacy of different types of sunscreens.

Due to recent global warming threats, the changes in the atmosphere have caused significant ultraviolet (UV) radiation exposure, primarily emitted by the sun, which creates more awareness of photoprotection. Sunscreen development has been a convenient and crucial approach to photoprotection against ultraviolet radiation. Due to high demand, upgrading the quality of sunscreen products and certifying methods are necessary to guarantee the safety of commercial sunscreen products for use. Sunscreen products should have a satisfactory amount of sun protection factor (SPF), ultraviolet A protection factor, as well as the photostability of the sunscreens for them to be considered effective and safe for use. A rigorous study on the effectiveness of the sunscreen components and their safety standards is essential for the productive use and further improvement of the available sunscreen materials. This article summarizes the effects and issues, protective measures of sunscreen usage, and its components, mainly ultraviolet filters.

Recent development of metal oxides and chalcogenides as antimicrobial agents.

Pathogenic microbes are a major concern in hospitals and other healthcare facilities because they affect the proper performance of medical devices, surgical devices, etc. Due to the antimicrobial resistance or multidrug resistance, combatting these microbial infections has grown to be a significant research area in science and medicine as well as a critical health concern. Antibiotic resistance is where microbes acquire and innately exhibit resistance to antimicrobial agents. Therefore, the development of materials with promising antimicrobial strategy is a necessity. Amongst other available antimicrobial agents, metal oxide and chalcogenide-based materials have shown to be promising antimicrobial agents due to their inherent antimicrobial activity as well as their ability to kill and inhibit the growth of microbes effectively. Moreover, other features including the superior efficacy, low toxicity, tunable structure, and band gap energy has makes metal oxides (i.e. TiO2, ZnO, SnO2 and CeO2 in particular) and chalcogenides (Ag2S, MoS2, and CuS) promising candidates for antimicrobial applications as illustrated by examples discussed in this review.

Recent progress of phytogenic synthesis of ZnO, SnO2, and CeO2 nanomaterials.

A critical investigation on the fabrication of metal oxide nanoparticles (NPs) such as ZnO, SnO2, and CeO2 NPs synthesized from green and phytogenic method using plants and various plant parts have been compiled. In this review, different plant extraction methods, synthesis methods, characterization techniques, effects of plant extract on the physical, chemical, and optical properties of green synthesized ZnO, SnO2, and CeO2 NPs also have been compiled and discussed. Effect of several parameters on the size, morphology, and optical band gap energy of metal oxide have been explored. Moreover, the role of solvents has been found important and discussed. Extract composition i.e. phytochemicals also found to affect the morphology and size of the synthesized ZnO, SnO2, and CeO2 NPs. It was found that, there is no universal extraction method that is ideal and extraction techniques is unique to the plant type, plant parts, and solvent used.

ZnO-based antimicrobial coatings for biomedical applications.

Rapid transmission of infectious microorganisms such as viruses and bacteria through person-to-person contact has contributed significantly to global health issues. The high survivability of these microorganisms on the material surface enumerates their transmissibility to the susceptible patient. The antimicrobial coating has emerged as one of the most interesting technologies to prevent growth and subsequently kill disease-causing microorganisms. It offers an effective solution a non-invasive, low-cost, easy-in-use, side-effect-free, and environmentally friendly method to prevent nosocomial infection. Among antimicrobial coating, zinc oxide (ZnO) stands as one of the excellent materials owing to zero toxicity, high biocompatibility to human organs, good stability, high abundancy, affordability, and high photocatalytic performance to kill various infectious pathogens. Therefore, this review provides the latest research progress on advanced applications of ZnO nanostructure-based antibacterial coatings for medical devices, biomedical applications, and health care facilities. Finally, future challenges and clinical practices of ZnO-based antibacterial coating are addressed.

Understanding and combating COVID-19 using the biology and chemistry of SARS-CoV-2.

The coronavirus disease 2019 (COVID-19) is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Symptoms of COVID-19 can range from asymptomatic to severe, which could lead to fatality. Like other pathogenic viruses, the infection of SARS-CoV-2 relies on binding its spike glycoprotein to the host receptor angiotensin-converting enzyme 2 (ACE 2). Molecular studies suggested that there is a high affinity between the spike glycoprotein and ACE 2 that might arise due to their hydrophobic interaction. This property is mainly responsible for making this virus highly infectious. Apart from this, the transmissibility of the virus, prolonged viability in certain circumstances, and rapid mutations also contributed to the current pandemic situation. Nanotechnology provides potential alternative solutions to combat COVID-19 with the development of i. nanomaterial-based COVID-19 detection technology, ii. nanomaterial-based disinfectants, iii. nanoparticle-based vaccines, and iv. nanoparticle-based drug delivery. Hence, this review provides diverse insight into understanding COVID-19.

Effect of Zr doping on photoantioxidant and antibiofilm properties of CeO2 NPs fabricated using aqueous leaf extract of Pometia pinnata.

Synthesized cerium oxide nanoparticles (S-CeO2 NPs) and 1%, 5% and 10% zirconium doped CeO2 (Zr-doped CeO2) NPs were fabricated using aqueous leaf extract of Pometia pinnata. The synthesized NPs were characterized using standard techniques which confirmed successful synthesis of NPs with particle size ranging from 12 to 23 nm and band gap energy of 2.54-2.66 eV. Photoantioxidant activities showed enhanced activities under visible light irradiation in comparison to the dark condition in the dose-dependent study. Biofilm inhibition studies showed ~ 73% biofilm inhibition of Staphylococcus aureus at 512 µg/mL for S-CeO2, whereas 10% Zr-doped CeO2 NPs showed biofilm inhibition of 52.7%. The bactericidal tests showed killing properties at 1024 µg/mL of S-CeO2 NPs and at 512 µg/mL of 1% Zr-doped CeO2. Reduced bactericidal activities were observed for 5% and 10% Zr-doped CeO2. These studies showed that the fabricated NPs have both good photoantioxidant and antibacterial properties.

Suppression of hyphal formation and virulence of Candida albicans by natural and synthetic compounds.

Candida albicans undergoes a morphological yeast-to-hyphal transition during infection, which plays a significant role in its pathogenesis. The filamentous morphology of the hyphal form has been identified as a virulence factor as it facilitates surface adherence, intertwining with biofilm, invasion, and damage to host tissues and organs. Hence, inhibition of filamentation in addition to biofilm formation is considered a viable strategy against C. albicans infections. Furthermore, a good understanding of the signaling pathways involved in response to environmental cues driving hyphal growth is also critical to an understanding of C. albicans pathogenicity and to develop novel therapies. In this review, first the clinical significance and transcriptional control of C. albicans hyphal morphogenesis are addressed. Then, various strategies employed to suppress filamentation, prevent biofilm formation, and reduce virulence are discussed. These strategies include the inhibition of C. albicans filament formation using natural or synthetic compounds, and their combination with other agents or nanoformulations.

Zinc oxide and zinc oxide-based nanostructures: biogenic and phytogenic synthesis, properties and applications.

Zinc oxide nanoparticles (ZnO NPs) are considered as very significant and essential material due to its multifunctional properties, stability, low cost and wide usage. Many green and biogenic approaches for ZnO NPs synthesis have been reported using various sources such as plants and microorganisms. Plants contain biomolecules that can act as capping, oxidizing and reducing agents that increase the rate of reaction and stabilizes the NPs. This review emphasizes and compiles different types of plants and parts of plant used for the synthesis of ZnO and its potential applications at one place. The influence of biogenic and phytogenic synthesized ZnO on its properties and possible mechanisms for its fabrication has been discussed. This review also highlights the potential applications and future prospects of phytogenic synthesized ZnO in the field of energy production and storage, sun light harvesting, environmental remediation, and biological applications.

Effect of Mg doping on ZnO fabricated using aqueous leaf extract of Ziziphus mauritiana Lam. for antioxidant and antibacterial studies.

Aqueous leaf extract of Ziziphus mauritiana Lam. was successfully used to synthesize zinc oxide (ZnO) and magnesium-doped ZnO (Mg-doped ZnO) particles and acted as capping and stabilizing agent. UV-Vis diffuse reflectance spectra showed that optical band gap energy of ZnO has narrowed from 3.11 to 3.08 eV and 3.03 eV when doped with 1% Mg and 5% Mg, respectively. Powder X-ray diffraction and X-ray photoelectron spectroscopy studies confirmed the purity and crystalline nature of the synthesized materials. FT-IR spectroscopy revealed the presence of phytochemicals coated on the surface of synthesized materials. The synthesized materials were found to effectively scavenge DPPH radicals in the presence of visible light in comparison to the dark. The antibacterial properties of the synthesized materials were evaluated against Staphylococcus aureus and Escherichia coli. The obtained results revealed that Staphylococcus aureus seemed to be more sensitive to the green synthesized ZnO and Mg-doped ZnO than Escherichia coli.

Selected nanotechnologies and nanostructures for drug delivery, nanomedicine and cure.

The development of nanoparticle-based drugs has provided many opportunities to diagnose, treat and cure challenging diseases. Through the manipulation of size, morphology, surface modification, surface characteristics, and materials used, a variety of nanostructures can be developed into smart systems, encasing therapeutic and imaging agents with stealth properties. These nanostructures can deliver drugs to specific tissues or sites and provide controlled release therapy. This targeted and sustained drug delivery decreases the drug-related toxicity and increases the patient's compliance with less frequent dosing. Nanotechnology employing nanostructures as a tool has provided advances in the diagnostic testing of diseases and cure. This technology has proven beneficial in the treatment of cancer, AIDS, and many other diseases. This review article highlights the recent advances in nanostructures and nanotechnology for drug delivery, nanomedicine and cures.

Antibacterial activities of zinc oxide and Mn-doped zinc oxide synthesized using Melastoma malabathricum (L.) leaf extract.

Zinc oxide (ZnO) is considered as a potential antimicrobial agent. This work aims to investigate the properties of ZnO and Mn-doped ZnO (1% and 5%) fabricated using aqueous leaf extract of Melastoma malabathricum via green synthesis and its antibacterial activities. The synthesized ZnO and Mn-doped ZnO were characterized using different techniques such as powder X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis diffuse reflectance spectroscopy. The synthesized ZnO and Mn-doped ZnO were tested for its antibacterial properties on two Gram-negative bacteria: Escherichia coli and Pseudomonas aeruginosa, and two Gram-positive bacteria: Bacillus subtilis and Staphylococcus aureus. The results showed positive antibacterial effects for B. subtilis and S. aureus only. Among the three materials tested, 1% Mn-doped ZnO exhibited the highest antibacterial activity for B. subtilis with the minimum inhibitory concentration being 50 mg/mL.

Recent progress of algae and blue-green algae-assisted synthesis of gold nanoparticles for various applications.

The hazardous effects of current nanoparticle synthesis methods have steered researchers to focus on the development of newer environmentally friendly and green methods for synthesizing nanoparticles using nontoxic chemicals. The development of environmentally friendly methods of nanoparticle synthesis with different sizes and shapes is one of the pressing challenges for the current nanotechnology. Several novel green approaches for the synthesis of AuNPs have been explored using different natural sources, such as plants, algae, bacteria, and fungi. Among organisms, algae and blue-green algae are of particular interest for nanoparticle synthesis. Gold nanoparticles (AuNPs) have a range of applications in medicine, diagnostics, catalysis, and sensors because of their significant key roles in important fields. AuNPs have attracted a significant interest for use in a variety of applications. The widespread use of AuNPs can be accredited to a combination of optical, physical, and chemical properties as well as the miscellany of size, shape, and surface composition that has been adopted through green synthesis methods.

Machine-Learning-Based Cyclic Voltammetry Behavior Model for Supercapacitance of Co-Doped Ceria/rGO Nanocomposite.

This paper examines the cobalt-doped ceria/reduced graphene oxide (Co-CeO2/rGO) nanocomposite as a supercapacitor and modeling of its cyclic voltammetry behavior using Artificial Neural Network (ANN) and Random Forest Algorithm (RFA). Good agreement was found between experimental results and the predicted values generated by using ANN and RFA. Simulation results confirmed the accuracy of the models, compared to measurements from supercapacitor module power-cycling. A comparison of the best performance between ANN and RFA models shows that the ANN models performed better (value of coefficient of determination >0.95) than the RFA models for all datasets used in this study. The results of the ANN and RFA models could be useful in designing the unique nanocomposites for supercapacitors and other strategies related with energy and the environment.

Fungi-assisted silver nanoparticle synthesis and their applications.

Nanotechnology is a rapidly developing field because of its wide range of applications in science, nanoscience and biotechnology. Nanobiotechnology deals with nanomaterials synthesised or modified using biotechnology. Fungi are used to synthesise metal nanoparticles and they have vast applications in wound healing, pathogen detection and control, food preservation, textiles, fabrics, etc. The present review describes the different types of fungi used for the biosyntheses of silver nanoparticles (AgNPs), along with their characterisation and possible biological applications. AgNPs synthesised by other physical and chemical methods are expensive and have toxic substances adsorbed onto them. Therefore, green, simple and effective approaches have been chosen for the biosynthesis of AgNPs, which are very important because of their lower toxicity and environmentally friendly behaviour. AgNPs synthesised using fungi have high monodispersity, specific composition and a narrow size range. In this regard, among the different biological methods used for metal nanoparticle synthesis, fungi are considered to be a superior biogenic method owing to their diversity and better size control. To further understand the biosynthesis of AgNPs using various fungi and evaluate their potential applications, this review discusses the antimicrobial, antibacterial, antifungal, antiviral, antidermatophytic, anti-inflammatory, antitumor, hepatoprotective, cytotoxic, hypotensive, and immunomodulatory activities of these AgNPs. The synthesis of AgNPs using fungi is a clean, green, inexpensive, eco-friendly, reliable, and safe method that can be used for a range of applications in real life for the benefit of human beings.

Recent advancements in deciphering the therapeutic properties of plant secondary metabolites: phenolics, terpenes, and alkaloids.

Plants produce a diverse range of secondary metabolites that serve as defense compounds against a wide range of biotic and abiotic stresses. In addition, their potential curative attributes in addressing various human diseases render them valuable in the development of pharmaceutical drugs. Different secondary metabolites including phenolics, terpenes, and alkaloids have been investigated for their antioxidant and therapeutic potential. A vast number of studies evaluated the specific compounds that possess crucial medicinal properties (such as antioxidative, anti-inflammatory, anticancerous, and antibacterial), their mechanisms of action, and potential applications in pharmacology and medicine. Therefore, an attempt has been made to characterize the secondary metabolites studied in medicinal plants, a brief overview of their biosynthetic pathways and mechanisms of action along with their signaling pathways by which they regulate various oxidative stress-related diseases in humans. Additionally, the biotechnological approaches employed to enhance their production have also been discussed. The outcome of the present review will lead to the development of novel and effective phytomedicines in the treatment of various ailments.