Feasibility Investigation of Cellulose Polymers for Mucoadhesive Nasal Drug Delivery Applications.

The feasibility of various cellulose polymer derivatives, including methylcellulose (MC), hydroxypropyl methylcellulose (HPMC), sodium-carboxymethylcellulose (sodium-CMC), and cationic-hydroxyethylcellulose (cationic-HEC), for use as an excipient to enhance drug delivery in nasal spray formulations was investigated. Three main parameters for evaluating the polymers in nasal drug delivery applications include rheology, ciliary beat frequency (CBF), and permeation across nasal tissue. Reversible thermally induced viscosity enhancement was observed at near nasal physiological temperature when cellulose derivatives were combined with an additional excipient, poly(vinyl caprolactam)-poly(vinyl acetate)-poly(ethylene glycol) graft copolymer (PVCL-PVA-PEG). Cationic-HEC was shown to enhance acyclovir permeation across the nasal mucosa. None of the tested cellulosic polymers caused any adverse effects on porcine nasal tissues and cells, as assessed by alterations in CBF. Upon an increase in polymer concentration, a reduction in CBF was observed when ciliated cells were immersed in the polymer solution, and this decrease returned to baseline when the polymer was removed. While each cellulose derivative exhibited unique advantages for nasal drug delivery applications, none stood out on their own to improve more than one of the performance characteristics examined. Hence, these data may be useful for the development of new cellulose derivatives in nasal drug formulations.

Two-photon fluorescence imaging super-enhanced by multishell nanophotonic particles, with application to subcellular pH.

A novel nanophotonic method for enhancing the two-photon fluorescence signal of a fluorophore is presented. It utilizes the second harmonic (SH) of the exciting light generated by noble metal nanospheres in whose near-field the dye molecules are placed, to further enhance the dye's fluorescence signal in addition to the usual metal-enhanced fluorescence phenomenon. This method enables demonstration, for the first time, of two-photon fluorescence enhancement inside a biological system, namely live cells. A multishell hydrogel nanoparticle containing a silver core, a protective citrate capping, which serves also as an excitation quenching inhibitor spacer, a pH indicator dye shell, and a polyacrylamide cladding are employed. Utilizing this technique, an enhancement of up to 20 times in the two-photon fluorescence of the indicator dye is observed. Although a significant portion of the enhanced fluorescence signal is due to one-photon processes accompanying the SH generation of the exciting light, this method preserves all the advantages of infrared-excited, two-photon microscopy: enhanced penetration depth, localized excitation, low photobleaching, low autofluorescence, and low cellular damage.

Hydrogel nanoparticles with covalently linked coomassie blue for brain tumor delineation visible to the surgeon.

Delineation of tumor margins is a critical and challenging objective during brain cancer surgery. A tumor-targeting deep-blue nanoparticle-based visible contrast agent is described, which, for the first time, offers in vivo tumor-specific visible color staining. This technology thus enables color-guided tumor resection in real time, with no need for extra equipment or special lighting conditions. The visual contrast agent consists of polyacrylamide nanoparticles covalently linked to Coomassie Blue molecules (for nonleachable blue color contrast), which are surface-conjugated with polyethylene glycol and F3 peptides for efficient in vivo circulation and tumor targeting, respectively.

Fluorophore and dye-assisted dispersion of carbon nanotubes in aqueous solution.

DNA short oligo, surfactant, peptides, and polymer-assisted dispersion of single-walled carbon nanotube (SWCNTs) in aqueous solution have been intensively studied. It has been suggested that van der Waals interaction, π-π stacking, and hydrophobic interaction are major factors that account for the SWCNTs dispersion. Fluorophore and dye molecules such as Rhodamine B and fluorescein have both hydrophilic and hydrophobic moieties. These molecules also contain π-conjugated systems that can potentially interact with SWCNTs to induce its dispersion. Through a systematic study, here we show that SWCNTs can be dispersed in aqueous solution in the presence of various fluorophore or dye molecules. However, the ability of a fluorophore or dye molecule to disperse SWCNTs is not correlated with the stability of the fluorophore/dye-SWCNT complex, suggesting that the on-rate of fluorophore/dye binding to SWCNTs may dominate the efficiency of this process. We also examined the uptake of fluorophore molecules by mammalian cells when these molecules formed complexes with SWCNTs. The results can have potential applications in the delivery of poor cell-penetrating fluorophore molecules.

Methylene blue covalently loaded polyacrylamide nanoparticles for enhanced tumor-targeted photodynamic therapy.

The use of targeted nanoparticles (NPs) as a platform for loading photosensitizers enables selective accumulation of the photosensitizers in the tumor area, while maintaining their photodynamic therapy (PDT) effectiveness. Here two novel kinds of methylene blue (MB)-conjugated polyacrylamide (PAA) nanoparticles, MBI-PAA NPs and MBII-PAA NPs, based on two separate MB derivatives, are developed for PDT. This covalent conjugation with the NPs (i) improves the loading of MB, (ii) prevents any leaching of MB from the NPs and (iii) protects the MB from the effects of enzymes in the biological environment. The loading of MB into these two kinds of NPs was controlled by the input amount, resulting in concentrations with optimal singlet oxygen production. For each of the MB-NPs, the highest singlet oxygen production was found for an MB loading of around 11 nmol mg(-1). After attachment of F3 peptide groups, for targeting, each of these NPs was taken up, selectively, by MDA-MB-435 tumor cells, in vitro. PDT tests demonstrated that both kinds of targeted NPs resulted in effective tumor cell kill, following illumination, while not causing dark toxicity.

Two-photon nano-PEBBLE sensors: subcellular pH measurements.

Intracellular pH mapping is of great importance as it plays a critical role in many cellular events. Also, in tissue, pH mapping can be an indicator for the onset of cancer. Here we describe a biocompatible, targeted, ratiometric, fluorescent, pH sensing nano-PEBBLE (Photonic Explorer for Biomedical use with Biologically Localized Embedding) that is based on two-photon excitation. Two-photon excitation minimizes the photobleaching and cell autofluorescence drastically, leading to an increase in the signal-to-noise ratio. PEBBLE nanosensors provide a novel approach for introducing membrane impermeant dyes, like HPTS, into cells. We use both non-targeted and F3 peptide targeted PEBBLE nanosensors for intracellular pH measurement of 9L cells. The intracellular measurements suggest that the non-targeted nanosensors are mostly trapped in endosomes, whereas the F3 peptide targeting enables them to escape/avoid these acidic compartments. Combining the advantages of pH sensitive PEBBLE nanoparticles, including their specific targeting, with the advantages of two-photon microscopy provides an attractive and promising prospect for non-invasive real-time monitoring of pH inside cancer cells and tissues.

Novel methods to incorporate photosensitizers into nanocarriers for cancer treatment by photodynamic therapy.

OBJECTIVE: A hydrophobic photosensitizer, 2-[1-hexyloxyethyl]-2-devinyl pyropheophorbide-a (HPPH), was loaded into nontoxic biodegradable amine functionalized polyacrylamide (AFPAA) nanoparticles using three different methods (encapsulation, conjugation, and post-loading), forming a stable aqueous dispersion. Each formulation was characterized for physicochemical properties as well as for photodynamic performance so as to determine the most effective nanocarrier formulation containing HPPH for photodynamic therapy (PDT). MATERIALS AND METHODS: HPPH or HPPH-linked acrylamide was added into monomer mixture and polymerized in a microemulsion for encapsulation and conjugation, respectively. For post-loading, HPPH was added to an aqueous suspension of pre-formed nanoparticles. Those nanoparticles were tested for optical characteristics, dye loading, dye leaching, particle size, singlet oxygen production, dark toxicity, in vitro photodynamic cell killing, whole body fluorescence imaging and in vivo PDT. RESULTS: HPPH was successfully encapsulated, conjugated or post-loaded into the AFPAA nanoparticles. The resultant nanoparticles were spherical with a mean diameter of 29 ± 3 nm. The HPPH remained intact after entrapment and the HPPH leaching out of nanoparticles was negligible for all three formulations. The highest singlet oxygen production was achieved by the post-loaded formulation, which caused the highest phototoxicity in in vitro assays. No dark toxicity was observed. Post-loaded HPPH AFPAA nanoparticles were localized to tumors in a mouse colon carcinoma model, enabling fluorescence imaging, and producing a similar photodynamic tumor response to that of free HPPH in equivalent dose. CONCLUSIONS: Post-loading is the promising method for loading nanoparticles with hydrophobic photosensitizers to achieve effective in vitro and in vivo PDT.

Liposomal encapsulation of trans-crocetin enhances oxygenation in patients with COVID-19-related ARDS receiving mechanical ventilation.

Current therapeutic treatments improving the impaired transportation of oxygen in acute respiratory distress syndrome (ARDS) have been found to be relevant and beneficial for the therapeutic treatment of COVID-19 patients suffering from severe respiratory complications. Hence, we report the preclinical and the preliminary results of the Phase I/II clinical trial of LEAF-4L6715, a liposomal nanocarrier encapsulating the kosmotropic agent trans-crocetin (TC), which, once injected, enhance the oxygenation of vascular tissue and therefore has the potential to improve the clinical outcomes of ARDS and COVID-19 in severely impacted patients. We demonstrated that the liposomal formulation enabled to increase from 30 min to 48 h the reoxygenation properties of free TCs in vitro in endothelial cells, but also to improve the half-life of TC by 6-fold in healthy mice. Furthermore, we identified 25 mg/kg as the maximum tolerated dose in mice. This determined concentration led to the validation of the therapeutic efficacy of LEAF-4 L6715 in a sepsis mouse model. Finally, we report the preliminary outcomes of an open-label multicenter Phase I/II clinical trial (EudraCT 2020-001393-30; NCT04378920), which was aimed to define the appropriate schedule and dosage of LEAF-4L6715 and to confirm its tolerability profile and preliminary clinical activity in COVID-19 patients treated in intensive care unit.

Nanoencapsulation method for high selectivity sensing of hydrogen peroxide inside live cells.

Reactive oxygen species (ROS) are ubiquitous in life and death processes of cells (Finkel, T.; Holbrook, N. J. Nature 2000, 408 (6809), 239-247), with a major role played by the most stable ROS, hydrogen peroxide (H(2)O(2)). However, the study of H(2)O(2) in live cells has been hampered by the absence of selective probes. Described here is a novel nanoprobe ("nanoPEBBLE") with dramatically improved H(2)O(2) selectivity. The traditional molecular probe, 2',7'-dichlorofluorescin (DCFH), which is also sensitive to most other ROS, was empowered with high selectivity by a nanomatrix that blocks the interference from all other ROS (hydroxyl radical, superoxide, nitric oxide, peroxynitrite, hypochlorous acid, and alkylperoxyl radical), as well as from enzymes such as peroxidases. The blocking is based on the combination of multiple exclusion principles: time barrier, hydrophobic energy barrier, and size barrier. However, H(2)O(2) sensitivity is maintained down to low nanomolar concentrations. The surface of the nanoprobe was engineered to address biological applications, and the power of this new nanoPEBBLE is demonstrated by its use on RAW264.7 murine macrophages. These nanoprobes may provide a powerful chemical detection/imaging tool for investigating biological mechanisms related to H(2)O(2) or other species, with high spatial and temporal resolution.

Near infrared luminescent oxygen nanosensors with nanoparticle matrix tailored sensitivity.

The development of sensors for noninvasive determination of oxygen levels in live cells and tissues is critical for the understanding of cellular functions, as well as for monitoring the status of disease, such as cancer, and for predicting the efficacy of therapy. We describe such nontoxic, targeted, and ratiometric 30 nm oxygen nanosensors made of polyacrylamide hydrogel, near-infrared (NIR) luminescent dyes, and surface-conjugated tumor-specific peptides. They enabled noninvasive real-time monitoring of oxygen levels in live cancer cells under normal and hypoxic conditions. The required sensitivity, brightness, selectivity, and stability were achieved by tailoring the interaction between the nanomatrix and indicator dyes. The developed nanosensors may become useful for in vivo oxygen measurements.

Ratiometric photoacoustic sensing of pH using a "sonophore".

This work describes ratiometric photoacoustic chemical sensing of pH, and describes how these measurements can be applied as a ratiometric biomedical imaging modality to image pH in intact biological tissue.

Light-based methods for whole blood bacterial inactivation enabled by a recirculating flow system.

Light of certain wavelengths can be used to inactivate pathogens. Whole blood is opaque; thus, the penetration of light is reduced. Here, we overcame this limitation using a thin transparent tube that is illuminated from all angles. Three light-based techniques were evaluated: photodynamic therapy (PDT) using a 660-nm light and antibody-photosensitizer conjugates, ultraviolet, and violet light. We observed a reduction of 55-71% of Staphylococcus aureus after 5 h of exposure (starting concentration 107  CFU mL-1 ) and an 88-97% reduction in methicillin-resistant Staphylococcus aureus (MRSA) (starting 104  CFU mL-1 ). An 83-92% decrease for S. aureus and 98-99.9% decrease for MRSA were observed when combined with an immunocapture approach. Complete blood count with differential analysis did not reveal any significant changes in the blood cell numbers. Genotoxicity studies showed that violet and ultraviolet did not induce any significant level of single strand breaks and alkali labile sites in the peripheral blood mononuclear cells (PBMC). In contrast, ultraviolet did induce a very low level of cyclobutane pyrimidine dimers, a UV damage indicator. PDT generated a significant level of single strand breaks and 8-oxoGua in these cells. The approaches showed promise for whole blood pathogen inactivation with minimal collateral damage to PBMC.

Indocyanine-green-embedded PEBBLEs as a contrast agent for photoacoustic imaging.

Nanoparticles 100 nm in diameter containing indocyanine green (ICG) have been developed as a contrast agent for photoacoustic (PA) imaging based on (photonic explorers for biomedical use by biologically localized embedding PEBBLE) technology using organically modified silicate (ormosil) as a matrix. ICG is an FDA-approved dye with strong optical absorption in the near-infrared (NIR) region, where light can penetrate deepest into biological tissue. A photoacoustic imaging system was used to study image contrast as a function of PEBBLE concentration in phantom objects. ICG-embedded ormosil PEBBLEs showed improved stability in aqueous solution compared with free ICG dye. The particles were conjugated with HER-2 antibody for breast cancer and prostate cancer cell targeting. Initial in vitro characterization shows high contrast and high efficiency for binding to prostate cancer cells. ICG can also be used as a photosensitizer (generating toxic oxygen by illumination) for photodynamic therapy. We have measured the photosensitization capability of ICG-embedded ormosil nanoparticles. This feature can be utilized to combine detection and therapeutic functions in a single agent.

Vascular targeted nanoparticles for imaging and treatment of brain tumors.

PURPOSE: Development of new therapeutic drug delivery systems is an area of significant research interest. The ability to directly target a therapeutic agent to a tumor site would minimize systemic drug exposure, thus providing the potential for increasing the therapeutic index. EXPERIMENTAL DESIGN: Photodynamic therapy (PDT) involves the uptake of a sensitizer by the cancer cells followed by photoirradiation to activate the sensitizer. PDT using Photofrin has certain disadvantages that include prolonged cutaneous photosensitization. Delivery of nanoparticles encapsulated with photodynamic agent specifically to a tumor site could potentially overcome the drawbacks of systemic therapy. In this study, we have developed a multifunctional polymeric nanoparticle consisting of a surface-localized tumor vasculature targeting F3 peptide and encapsulated PDT and imaging agents. RESULTS: The nanoparticles specifically bound to the surface of MDA-435 cells in vitro and were internalized conferring photosensitivity to the cells. Significant magnetic resonance imaging contrast enhancement was achieved in i.c. rat 9L gliomas following i.v. nanoparticle administration. Serial magnetic resonance imaging was used for determination of pharmacokinetics and distribution of nanoparticles within the tumor. Treatment of glioma-bearing rats with targeted nanoparticles followed by PDT showed a significant improvement in survival rate when compared with animals who received PDT after administration of nontargeted nanoparticles or systemic Photofrin. CONCLUSIONS: This study reveals the versatility and efficacy of the multifunctional nanoparticle for the targeted detection and treatment of cancer.

A Novel Pathogen Capturing Device for Removal and Detection.

A simple technique that employs an antibody coated polydimethylsiloxane tube is used for effective capturing of bloodborne and foodborne pathogens. By recirculating the entire sample through the antibody coated tube, accumulation of target pathogens is achieved, thereby delivering a higher concentration of pathogens in a small volume. The described method can provide an effective and economical solution to microbiology techniques that rely on enrichment, thereby expediting diagnostics. Using this method 80.3 ± 5.6% of Staphylococcus aureus with a starting concentration of ~107 CFU/mL and 95.4 ± 1.0% of Methicillin-resistant Staphylococcus aureus with starting concentration of ~104 CFU/mL were removed from 5 mL blood in a few hours. This concept was extended to live rats with an induced bloodstream S. aureus infection. A reduction of two orders of magnitude in the bacterial load of the rats was observed within a few hours. The same technique was used to capture a food pathogen, Salmonella typhimurium, with starting concentrations as low as ~100 CFU, from 100 or 250 mL of culture broth within similar timeframes as above. The feasibility for food pathogen testing applications was additionally confirmed by capturing and detecting S. typhimurium in ground chicken and ground beef.

Extracorporeal photo-immunotherapy for circulating tumor cells.

It is well established that metastasis through the circulatory system is primarily caused by circulating tumor cells (CTCs). In this preliminary effort, we report an approach to eliminate circulating tumor cells from the blood stream by flowing the blood though an extracorporeal tube and applying photodynamic therapy (PDT). Chlorin e6 (Ce6), a photosensitizer, was conjugated to CD44 antibody in order to target PC-3, a prostate cancer cell line. PC-3 cells were successfully stained by the Ce6-CD44 antibody conjugate. PDT was performed on whole blood spiked with stained PC-3 cells. As the blood circulated through a thin transparent medical tube, it was exposed to light of 660 nm wavelength generated by an LED array. An exposure of two minutes was sufficient to achieve selective cancer cell necrosis. In comparison, to PDT of cells growing inside a tissue culture, the PDT on thin tube exhibited significantly enhanced efficiency in cell killing, by minimizing light attenuation by blood. It suggests a new extracorporeal methodology of PDT for treating CTCs as well as other hematological pathogens.

Chemically Modified Plastic Tube for High Volume Removal and Collection of Circulating Tumor Cells.

In this preliminary effort, we use a commercially available and chemically modified tube to selectively capture circulating tumor cells (CTCs) from the blood stream by immobilizing human anti-EpCAM antibodies on the tube's interior surface. We describe the requisite and critical steps required to modify a tube into a cancer cell-capturing device. Using these simple modifications, we were able to capture or entrap about 85% of cancer cells from suspension and 44% of cancer cells from spiked whole blood. We also found that the percentage of cells captured was dependent on the tube's length and also the number of cancer cells present. It is our strong belief that with the utilization of appropriate tube lengths and procedures, we can ensure capture and removal of nearly the entire CTC population in whole blood. Importantly after a patient's entire blood volume has circulated through the tube, the tube can then be trypsinized to release the captured live CTCs for further analysis and testing.

Inductive heating kills cells that contribute to plaque: a proof-of-concept.

Inducing cell death by heating targeted particles shows promise in cancer treatment. Here, we aim to demonstrate the feasibility of extending the use of this technique to treat and remove vascular deposits and thrombosis. We used induction heating of macrophages, which are key contributors to atherosclerosis and have demonstrated clear feasibility for heating and destroying these cells using ferromagnetic and pure iron particles. Specifically, iron particles achieved maximum temperatures of 51 ± 0.5 °C and spherical particles achieved a maximum temperature of 43.9 ± 0.2 °C (N = 6) after 30 min of inductive heating. Two days of subsequent observation demonstrated that inductive heating led to a significant reduction in cell number. Prior to induction heating, cell density was 105,000 ± 20,820 cells/ml (N = 3). This number was reduced to 6,666 ± 4,410 cells/ml for the spherical particles and 16,666 ± 9,280 cells/ml for the iron particles 24 h after inductive heating. Though cell density increased on the second day following inductive heating, the growth was minimal. Cells grew to 26,667 ± 6,670 cells/ml and 30,000 ± 15,280 cells/ml respectively. Compared to cell cultures with iron and spherical particles that were not subjected to induction heating, we observed a 97% reduction in cell count for the spherical particles and a 91% reduction for the iron particles after the first 24 h. After 48 h we observed a 95% reduction in cell growth for both spherical and iron particles. Induction heating of microparticles was thus highly effective in reducing the macrophage population and preventing their growth. These results demonstrate the feasibility of targeting cells involved in atherosclerosis and warrant further research into potential clinical applications.

A high-throughput photodynamic therapy screening platform with on-chip control of multiple microenvironmental factors.

We present a novel high-throughput microfluidic platform that enables the evaluation of the anticancer efficacy of photodynamic therapy (PDT) drugs over multiple microenvironmental factors. PDT is uniquely complex, originating from its dependence on three separate but essential elements: drug (also called photosensitizer), oxygen, and light. Thus, obtaining a reliable evaluation of PDT efficacy is highly challenging, requiring considerable effort and time to evaluate all three interdependent parameters. In this paper, we report a high-throughput efficacy screening platform that we implemented by developing microfluidic components that individually control basic PDT elements (photosensitizer concentrations, oxygen levels, and light fluence) and then integrating them into a single triple-layer device. The integrated microfluidic chip consists of an array of small compartments, each corresponding to a specific combination of these three variables. This allows for more than 1000 different conditions being tested in parallel. Cancer cells are cultured within the device, exposed to different PDT conditions, and then monitored for their viability using live/dead fluorescence staining. The entire screening assay takes only 1 hour, and the collected PDT outcomes (cell viability) for combinatorial screening are analysed and reported as traditional dose-response curves or 3D bubble charts using custom software. As a proof of concept, methylene blue is adopted as a photosensitizer and its drug efficacy on C6 glioma cells has been successfully evaluated for a total of 324 PDT conditions using the fabricated chip. This platform can facilitate not only the development of new photosensitizers but also the optimization of current PDT protocols.

Hydrogen peroxide (H2O2) detection with nanoprobes for biological applications: a mini-review.

Hydrogen peroxide (H2O2) is an important member of the reactive oxygen species, playing various roles in biology and medicine. The conventional detection methods for H2O2 are often restricted by their limited sensitivity, poor selectivity towards H2O2, inappropriate physicochemical properties for detection in biological environments, long response time, etc. We briefly review here some recent nanotechnology--based approaches for H2O2 detection, which present an effective improvement, overcoming some of the limitations of the conventional H2O2 sensing techniques.