Ionizing radiation attracts tumor targeting and apoptosis by radiotropic lysyl oxidase traceable nanoparticles.

Lysyl oxidase (LOX) is a cell-secreted amine oxidase that crosslinks collagen and elastin in extracellular microenvironment. LOX-traceable nanoparticles (LOXab-NPs) consisting of LOX antibodies (LOXab) and paclitaxel, can accumulate at high concentrations at radiation-treated target sites, as a tumor-targeting drug carrier for chemotherapy. Tumor-targeting and anticancer effects of PLGA based LOXab-NPs in vitro and in vivo were evaluated at radiation-targeted site. In the in vivo A549 lung carcinoma xenograft model, we showed highly specific tumor targeting (above 7.0 times higher) of LOXab-NPs on irradiated tumors. Notably, systemically administered NPs delayed tumor growth, reducing tumor volumes by more than 2 times compared with non-irradiated groups (222% vs. >500%) over 2 weeks. Radiotropic LOXab-NPs can serve as chemotherapeutic vehicles for combined targeted chemo-radiotherapy in clinical oncology.

Neuropeptide Substance-P-Conjugated Chitosan Nanofibers as an Active Modulator of Stem Cell Recruiting.

The goal to successful wound healing is essentially to immobilize and recruit appropriate numbers of host stem or progenitor cells to the wound area. In this study, we developed a chitosan nanofiber-immobilized neuropeptide substance-P (SP), which mediates stem cell mobilization and migration, onto the surfaces of nanofibers using a peptide-coupling agent, and evaluated its biological effects on stem cells. The amount of immobilized SP on chitosan nanofibers was modulated over the range of 5.89 ± 3.27 to 75.29 ± 24.31 ng when reacted with 10 to 500 ng SP. In vitro migration assays showed that SP-incorporated nanofibers induced more rapid migration of human mesenchymal stem cells on nanofibers compared to pristine samples. Finally, the conjugated SP evoked a minimal foreign body reaction and recruited a larger number of CD29- and CD44-positive stem cells into nanofibers in a mouse subcutaneous pocket model.

Selectively micro-patterned fibronectin for regulating fate of human mesenchymal stem cell.

Microenvironment of the extracellular matrix can influence cellular responses through alternation of initial attachment and induce production of new tissue. To study the effect of such microenvironment on the relationship of cell cytoskeletal shape and its biological behaviors such as adhesion, proliferation and differentiation, we designed a patterned strip line of fibronectin on self assembled monolayers via microcontact printing. The physiological behavior of human mesenchymal stem cell (hMSC) on defined micro-patterns of fibronectin was evaluated after 4 h and 2 days of culture. Initial adhesion of hMSCs on a substrate with pattern spacing of 11 µm was stabilized faster than that on other substrates. Ratio of proliferating hMSC on 5 and 11 µm substrate constantly maintained a high rate. hMSCs on 5 and 11 µm substrate could adhere to substrate as spreading from fibronectin pattern line to several and lateral fibronectin pattern line. Their nucleus area could represent artificial increase by widely spreading on several fibronectin pattern lines. On the contrary to this, ratio of proliferating hMSC on 20 µm substrate constantly maintained a low rate less than even control and 0 µm substrate without fibronectin pattern. Tiny nucleus caused narrow and elongated hMSC morphology on 20 µm substrate gave the negative effect on the cell adhesion and proliferation. However, hMSCs on 20 µm substrate possessed not only slightly increased value of GO/G1 phase but also down regulation of CD marker expression compared with other groups. These results show initial adhesion and morphology of hMSC could regulate specific cellular behavior of hMSC.

Fabrication of conductive polymer-based nanofiber scaffolds for tissue engineering applications.

Natural and synthetic polymers, in particular those that are conductive, are of great interest in the field of tissue engineering and the pursuit of biomimetic extracellular matrix (ECM) structures for adhesion, proliferation, and differentiation of cells. In the present study, natural chitin and conductive polyaniline (PANi) blended solutions were electrospun to produce biodegradable and conductive biomimetic nanostructured scaffolds. The chitin/PANi (Chi-PANi) nanofibrous materials were characterized using field emission scanning electron microscopy, Fourier transform-infrared spectroscopy, wettability analysis, mechanical testing, and electrical conductivity measurements using a 4-point probe method. The calculated electrical conductivities of the PANi-containing nanofiber scaffolds significantly increased as the amount of PANi increased, reaching 5.21 ± 0.28 x 10(-3) S/cm for 0.3 wt% content of the conducting polymer. In addition, the viability of human mesenchymal stem cells (hMSCs) cultured on the Chi-PANi nanofiber scaffolds in vitro was found to be excellent. These results suggest that the Chi-PANi nanofiber scaffolds have great potential for use in tissue engineering applications that involve electrical stimulation.

The Essential Function of miR-5739 in Embryonic Muscle Development.

Background and Objectives: Embryologically, mesodermal development is closely related to the development of various organs such as muscles, blood vessels, and hearts, which are the main organs that make up the body. However, treatment for mesoderm developmental disorders caused by congenital or acquired factors has so far relied on surgery and drug treatment for symptom relief, and more fundamentally, treatment for mesoderm developmental disorders is needed. Methods and Results: In our study, microRNA (miRNA), which plays an important role in the mesoderm development process, was identified and the developmental function was evaluated. miRNAs consist of small nucleotides, which act as transcription factors that bind to the 3' untranslated region and suppressed target gene expression. We constructed the human embryonic stem cell (hESC) knockout cell line and analyzed the function and characteristics of miR-5739, which plays an important role in mesoderm lineage. miR-5739 acts as a transcription factor targeting SMA, Brachyury T, Hand1, which controls muscle proliferation and differentiation, and KDR gene, which regulates vessel formation in vitro. In vivo results suggest a role in regulating muscle proliferation and differentiation. Gene ontology analysis confirmed that the miR-5739 is closely related to genes that regulate muscle and vessel proliferation and differentiation. Importantly, abnormal expression of miR-5739 was detected in somatic cells derived from patients with congenital muscle disease. Conclusions: Our study demonstrate that miR-5739 gene function significantly affects transcriptional circuits that regulate muscle and vascular differentiation during embryonic development.

Hydrogel cross-linking-programmed release of nitric oxide regulates source-dependent angiogenic behaviors of human mesenchymal stem cell.

Angiogenesis is stimulated by nitric oxide (NO) production in endothelial cells (ECs). Although proangiogenic actions of human mesenchymal stem cells (hMSCs) have been extensively studied, the mechanistic role of NO in this action remains obscure. Here, we used a gelatin hydrogel that releases NO upon crosslinking by a transglutaminase reaction ("NO gel"). Then, the source-specific behaviors of bone marrow versus adipose tissue-derived hMSCs (BMSCs versus ADSCs) were monitored in the NO gels. NO inhibition resulted in significant decreases in their angiogenic activities. The NO gel induced pericyte-like characteristics in BMSCs in contrast to EC differentiation in ADSCs, as evidenced by tube stabilization versus tube formation, 3D colocalization versus 2D coformation with EC tube networks, pericyte-like wound healing versus EC-like vasculogenesis in gel plugs, and pericyte versus EC marker production. These results provide previously unidentified insights into the effects of NO in regulating hMSC source-specific angiogenic mechanisms and their therapeutic applications.

Radially patterned polycaprolactone nanofibers as an active wound dressing agent.

BACKGROUND: The objectives of this study were to design polycaprolactone nanofibers with a radial pattern using a modified electrospinning method and to evaluate the effect of radial nanofiber deposition on mechanical and biological properties compared to non-patterned samples. METHODS: Radially patterned polycaprolactone nanofibers were prepared with a modified electrospinning method and compared with randomly deposited nanofibers. The surface morphology of samples was observed under scanning electron microscopy (SEM). The tensile properties of nanofibrous mats were measured using a tabletop uniaxial testing machine. Fluorescence-stained human bone marrow stem cells were placed along the perimeter of the radially patterned and randomly deposited. Their migration toward the center was observed on days 1, 4, and 7, and quantitatively measured using ImageJ software. RESULTS: Overall, there were no statistically significant differences in mechanical properties between the two types of polycaprolactone nanofibrous mats. SEM images of the obtained samples suggested that the directionality of the nanofibers was toward the central area, regardless of where the nanofibers were located throughout the entire sample. Florescence images showed stronger fluorescence inside the circle in radially aligned nanofibers, with significant differences on days 4 and 7, indicating that migration was quicker along radially aligned nanofibers than along randomly deposited nanofibers. CONCLUSIONS: In this study, we successfully used modified electrospinning to fabricate radially aligned nanofibers with similar mechanical properties to those of conventional randomly aligned nanofibers. In addition, we observed faster migration along radially aligned nanofibers than along randomly deposited nanofibers. Collectively, the radially aligned nanofibers may have the potential for tissue regeneration in combination with stem cells.

Three-Dimensionally Printed Breast Reconstruction Devices Facilitate Nanostructure Surface-Guided Healthy Lipogenesis.

Significant fat loss is common in silicon implantation with autologous lipofilling, the most popular type of breast surgery. To overcome this, a 3D-printed fat carrier with well-defined 200 µm radial string and spoke structure was developed, followed by an electrospun nanofiber coating on the entire device surface to promote fat adhesion. This device enhanced the mechanical properties comparably to commercial acellular dermal matrix for in vitro adipogenic differentiation of adipose-derived stem cells, implantation compatibility without foreign body responses, and maintenance of healthy lipid droplet structures. These results show the promising potential of this device to facilitate surface-guided lipogenesis in composite breast reconstruction surgery.

Substance-P and transforming growth factor-ß in chitosan microparticle-pluronic hydrogel accelerates regenerative wound repair of skin injury by local ionizing radiation.

Clinical irradiation therapy for cancer could increase the risk of localized wound complications. This study was conducted to evaluate the potential use of a chitosan microparticle-pluronic F127 (CSMP-PF) hydrogel complex containing bioactive molecules, substance P and transforming growth factor-ß1, to regeneratively repair skin damaged by local ionizing radiation (IR). The BALB/c/bkl mice were locally irradiated to their limbs with a single 40 Gy dose of Co-60 γ rays to induce a skin injury. The morphological characteristics of the chitosan microparticles were analysed by scanning electron microscopy. The amounts of bioactive molecules taken up and released by the CSMP-PF hydrogel complex were measured. Haematoxylin and eosin staining of IR-damaged skin showed acanthosis and hyperkeratosis in the epidermis; and damage to hair follicles/skin appendages and adipose tissue, as well as panniculus carnosus, in the dermis. Injection of the CSMP-PF hydrogel complex into IR-damaged skin resulted in skin repair, suggesting that the complex has potential for use in the regenerative repair of IR-damaged skin.

3-dimensional bioprinting for tissue engineering applications.

The 3-dimensional (3D) printing technologies, referred to as additive manufacturing (AM) or rapid prototyping (RP), have acquired reputation over the past few years for art, architectural modeling, lightweight machines, and tissue engineering applications. Among these applications, tissue engineering field using 3D printing has attracted the attention from many researchers. 3D bioprinting has an advantage in the manufacture of a scaffold for tissue engineering applications, because of rapid-fabrication, high-precision, and customized-production, etc. In this review, we will introduce the principles and the current state of the 3D bioprinting methods. Focusing on some of studies that are being current application for biomedical and tissue engineering fields using printed 3D scaffolds.

Gelatin blending and sonication of chitosan nanofiber mats produce synergistic effects on hemostatic functions.

To improve the hemostatic function of chitosan nanofiber mats, we studied the synergetic effects of gelatin blending and porosity control. Gelatin-blended-chitosan (Chi-Gel) nanofiber mats were evaluated with respect to surface morphology, mechanical properties and wettability, and functionally tested in a blood clotting study. The blood clotting efficiency of Chi-Gel nanofiber mats using rabbit whole blood in vitro was superior to that of chitosan nanofibers. Moreover, Chi-Gel nanofiber mats with enlarged porosity, produced by ultra-sonication, showed improved blood clotting efficiency, cell viability and cell infiltration compared with non-sonicated Chi-Gel nanofiber mats. Field-emission scanning electron microscopy revealed a richer density of platelets on sonicated nanofiber mats than on non-sonicated nanofiber mats after 3 min of blood clotting. The proliferation of human dermal fibroblast cells on sonicated Chi-Gel nanofiber mats using the DNA assay was higher than that on non-sonicated chitosan nanofiber mats after 7 days of culture. Confocal z-stack images showed that sonicated Chi-Gel nanofiber mats with high porosity supported active cell migration and infiltration into the 3-dimensional nanofiber mats. These results suggest that hydrophilic gelatin blending and sonication of chitosan nanofiber mats yields synergistic effects that not only improve hemostatic function but also promote wound repair.

Fabrication of sonicated chitosan nanofiber mat with enlarged porosity for use as hemostatic materials.

Electrospinning of pure chitosan was employed to obtain a nanofibrous hemostatic material. Owing to the water-solubility of the resulting acidic chitosan nanofibers, the optimum neutralization conditions were identified by testing various alkaline solutions, so that an insoluble material could be achieved. The pore size and thickness of the neutralized chitosan nanofibers mat could be controlled using ultra-sonication. The porosity of the chitosan mat was increased from 79.9% to 97.2% with ultra-sonication treatment for 1 min, and the water absorption time decreased from 110s to 9s. The blood clotting efficiency measured for the sonicated chitosan nanofiber mat was 1.35- and 3.41-fold better than the efficiencies of the Surgicel(®) and chitosan sponge, respectively. In addition, the proliferation of normal human dermal fibroblasts on the sonicated nanofiber mat was found to be 1.4-fold higher than that on the non-sonicated material after 7 days of culture.

Identification of structural determinants of ligand selectivity in 5-HT2 receptor subtypes on the basis of protein-ligand interactions.

Drug selectivity is one of the most critical improvement steps in drug development. The 5-hydroxytryptamine 2 (5-HT2) receptor has 3 subtypes that exhibit different pharmacological functions. Because of their high amino acid sequence similarity, designing small molecules that selectively activate only 1 receptor among the 3 subtypes is difficult. We performed homology modeling of the 5-HT2 receptor subtypes using the ß2-adrenergic receptor as a template to identify differences in active sites that may influence 5-HT2 receptor agonist selectivity. A subset of selective 5-HT2 agonists was docked into the modeled protein structures to investigate their interactions with each receptor. Subtype-specific active site residues at positions xl2.54, 5.39, and 5.46 interacted differently with each ligand. Molecular dynamics simulations revealed that position 5.46 of the 5-HT(2A) receptor interacted more favorably with selective 5-HT(2A) agonists than with selective 5-HT(2B) agonists. These computationally obtained insights provided clues to improving agonist selectivity for specific pharmacological action at 5-HT2 receptors.

Release kinetics and in vitro bioactivity of basic fibroblast growth factor: effect of the thickness of fibrous matrices.

In this study, we fabricated non-woven matrices using blends of polycaprolactone and gelatin with various spinning volumes to control the immobilized heparin content, which was ultimately intended to increase the immobilization efficiency of bFGF. The amount of bFGF on the heparin conjugated fibrous matrices depended on the thicknesses of the swollen matrices ranging from 35.4 ± 6.5 to 162.3 ± 14.0 ng and ≈90% of the bFGF was gradually released over a period of up to 56 d. The released bFGF enhanced the proliferation of human umbilical vein endothelial cells and human mesenchymal stem cells. In conclusion, our heparin-conjugated fibrous matrices have the potential to be used as a growth factor delivery system in tissue engineering applications.

The development of genipin-crosslinked poly(caprolactone) (PCL)/gelatin nanofibers for tissue engineering applications.

Composite nanofibers of poly(caprolactone) (PCL) and gelatin crosslinked with genipin are prepared. The contact angles and mechanical properties of crosslinked PCL-gelatin nanofibers decrease as the gelatin content increases. The proliferation of myoblasts is higher in the crosslinked PCL-gelatin nanofibers than in the PCL nanofibers, and the formation of myotubes is only observed on the crosslinked PCL-gelatin nanofibers. The expression level of myogenin, myosin heavy chain, and troponin T genes is increased as the gelatin content is increased. The results suggest that PCL-gelatin nanofibers crosslinked with genipin can be used as a substrate to modulate proliferation and differentiation of myoblasts, presenting potential applications in muscle tissue engineering.

Development of functional fibrous matrices for the controlled release of basic fibroblast growth factor to improve therapeutic angiogenesis.

In this study, novel fibrous matrices were developed as a depot to store and liberate growth factors in a controlled manner. Specifically, heparin was covalently conjugated onto the surface of fibrous matrices (composites of poly[caprolactone] and gelatin crosslinked with genipin), and basic fibroblast growth factor (bFGF) was then reversibly immobilized. The immobilization of bFGF was controlled as a function of the amount of conjugated heparin. The sustained release of bFGF from the fibrous matrices was successfully achieved over 4 weeks whereas physical adsorption of bFGF released quickly. The bFGF released from the fibrous matrices significantly enhanced in vitro proliferation of human umbilical vein endothelial cells. From the in vivo study, the group implanted with a higher amount of immobilized bFGF significantly facilitated neo-blood vessel formation as compared with other implantation groups. These results indicate that the sustained release of bFGF is important for the formation of blood vessels and that our fibrous matrices could be useful for regulation of tissue damage requiring angiogenesis. Further, our system can be combined with other growth factors with heparin binding domains, representing a facile depot for spatiotemporal control over the delivery of bioactive molecules in regenerative medicine.