RESUMEN
Due to its small hole-effective mass, flexibility, and transparency, copper iodide (CuI) has emerged as a promising p-type alternative to the predominantly used n-type metal oxide semiconductors. However, the lack of effective doping methods hinders the utility of CuI in various applications. Sulfur (S)-doping through liquid iodination is previously reported to significantly enhance electrical conductivity up to 511 S cm-1. In this paper, the underlying doping mechanism with various S-dopants is explored, and suggested a method for controlling electrical conductivity, which is important to various applications, especially thermoelectric (TE) materials. Subsequently, electric and TE properties are systematically controlled by adjusting the carrier concentration from 3.0 × 1019 to 4.5 × 1020 cm-3, and accurately measured thermal conductivity with respect to carrier concentration and film thickness. Sulfur-doped CuI (CuI:S) thin films exhibited a maximum power factor of 5.76 µW cm-1 K-2 at a carrier concentration of 1.3 × 1020 cm-3, and a TE figure of merit (ZT) of 0.25. Furthermore, a transparent and flexible TE power generator is developed, with an impressive output power density of 43 nW cm-2 at a temperature differential of 30 K. Mechanical durability tests validated the potential of CuI:S films in transparent and flexible TE applications.
RESUMEN
The ability to manipulate crystal structures using kinetic control is of broad interest because it enables the design of materials with structures, compositions, and morphologies that may otherwise be unattainable. Herein, we report the low-temperature structural transformation of bulk inorganic crystals driven by hard-soft acid-base (HSAB) chemistry. We show that the three-dimensional framework K2Sb8Q13 and layered KSb5Q8 (Q = S, Se, and Se/S solid solutions) compounds transform to one-dimensional Sb2Q3 nano/microfibers in N2H4·H2O solution by releasing Q2- and K+ ions. At 100 °C and ambient pressure, a transformation process takes place that leads to significant structural changes in the materials, including the formation and breakage of covalent bonds between Sb and Q. Despite the insolubility of the starting crystals in N2H4·H2O under the given conditions, the mechanism of this transformation can be rationalized by applying the HSAB principle. By adjusting factors such as the reactants' acid/base properties, temperature, and pressure, the process can be controlled, allowing for the achievement of a wide range of optical band gaps (ranging from 1.14 to 1.59 eV) while maintaining the solid solution nature of the anion sublattice in the Sb2Q3 nanofibers.
RESUMEN
The significant public health concerns related to particulate matter (PM) air pollutants and the airborne transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) have led to considerable interest in high-performance air filtration membranes. Highly ferroelectric polyvinylidene fluoride (PVDF) nanofiber (NF) filter membranes are successfully fabricated via electrospinning for high-performance low-cost air filtration. Spectroscopic and ferro-/piezoelectric analyses of PVDF NF show that a thinner PVDF NF typically forms a ferroelectric ß phase with a confinement effect. A 70-nm PVDF NF membrane exhibits the highest fraction of ß phase (87%) and the largest polarization behavior from piezoresponse force microscopy. An ultrathin 70-nm PVDF NF membrane exhibits a high PM0.3 filtration efficiency of 97.40% with a low pressure drop of 51 Pa at an air flow of 5.3 cm/s owing to the synergetic combination of the slip effect and ferroelectric dipole interaction. Additionally, the 70-nm PVDF NF membrane shows excellent thermal and chemical stabilities with negligible filtration performance degradation (air filtration efficiency of 95.99% and 87.90% and pressure drop of 55 and 65 Pa, respectively) after 24 h of heating at 120 °C and 1 h immersion in isopropanol.
RESUMEN
Current global emergencies, such as the COVID-19 pandemic and particulate matter (PM) pollution, require urgent protective measures. Nanofibrous air filter membranes that can capture PM0.3 and simultaneously help in preventing the spread of COVID-19 are essential. Therefore, a highly efficient nanofibrous air filter membrane based on amphiphilic poly(vinylidene fluoride)-graft-poly(oxyethylene methacrylate) (PVDF-g-POEM) double comb copolymer was fabricated using atomic transfer radical polymerization (ATRP) and electrospinning. Fourier transform infrared spectroscopy, X-ray diffraction, proton nuclear magnetic resonance, transmission electron microscopy, differential scanning calorimetry, and thermogravimetric analysis were employed to successfully characterize the molecular structure of the fabricated amphiphilic PVDF-g-POEM double comb copolymer. The nanofibrous air filter membrane based on amphiphilic PVDF-g-POEM double comb copolymer achieved a low air resistance of 4.69 mm H2O and a high filtration efficiency of 93.56 % due to enhanced chemical and physical adsorption properties.
RESUMEN
Herein, we demonstrate the preparation of a scalable bar-coated nanocomposite organic-inorganic hybrid film and developed robust barrier films for general purpose packaging. Using combinatory printing of polymers and nanocomposites by bar coating, a facile and effective barrier film fabrication method was developed. Based on a preliminary survey with several material combinations, a rationalized two-fold nanocomposite film was fabricated. The number of layers in the barrier film significantly modified oxygen barrier performance such that, for the 1 wt% ethylene vinyl alcohol (EVOH) intercalated film, the oxygen transmission rate (OTR) of the 5-layer sample was reduced to 31.69% of the OTR of the 3-layer sample (112.8 vs. 35.75 cc/(m² · day)). In addition, fine tuning the amount of EVOH polymer enabled further improvement of oxygen barrier performance. Intercalation of 2 wt% EVOH resulted an OTR improvement from 35.75 in the 1 wt% sample to 11.90 cc/(m² ·day), which is a 4.25-fold enhancement. Overall barrier characteristics proved that our approach could be used for large-area deposited, oxygen resistant, general purpose packaging applications.
RESUMEN
In diverse classes of organic optoelectronic devices, controlling charge injection, extraction, and blocking across organic semiconductor-inorganic electrode interfaces is crucial for enhancing quantum efficiency and output voltage. To this end, the strategy of inserting engineered interfacial layers (IFLs) between electrical contacts and organic semiconductors has significantly advanced organic light-emitting diode and organic thin film transistor performance. For organic photovoltaic (OPV) devices, an electronically flexible IFL design strategy to incrementally tune energy level matching between the inorganic electrode system and the organic photoactive components without varying the surface chemistry would permit OPV cells to adapt to ever-changing generations of photoactive materials. Here we report the implementation of chemically/environmentally robust, low-temperature solution-processed amorphous transparent semiconducting oxide alloys, In-Ga-O and Ga-Zn-Sn-O, as IFLs for inverted OPVs. Continuous variation of the IFL compositions tunes the conduction band minima over a broad range, affording optimized OPV power conversion efficiencies for multiple classes of organic active layer materials and establishing clear correlations between IFL/photoactive layer energetics and device performance.
RESUMEN
Solution-processed organic single crystals with high carrier mobility have been actively investigated for diverse applications such as displays, sensors, and next generation electronics on a flexible platform. However, the lack of precise alignment and growth control of organic single crystals impedes the widespread adoption of organic materials in an industrial perspective. Here, a photochemical modification approach is reported tailoring the solubility and molecular diffusivity of polymeric sacrificial layer and sequential batch-type vapor annealing to implement high-performance (average saturation mobility: 8.01 cm2 V-1 s-1 ) organic single-crystal thin film transistors with large channel width including multiple aligned single crystals. Additionally, the mechanical properties of the organic single crystals are systematically investigated with extreme strain conditions such as bending radius of 150 µm.
RESUMEN
A series of light- and air-stable silver(I) pyrazolylmethylpyridine complexes [Ag(L(R))]n(BF4)n (L = pyrazolylmethylpyridine; R = H, 1; R = Me, 2; R = i-Pr, 3) and [Ag(L(R))(NO3)]2 (L = pyrazolylmethylpyridine; R = H, 4; R = Me, 5; R = i-Pr, 6) has been synthesized and structurally and spectroscopically characterized. In all of the molecular structures, the pyrazolylmethylpyridine ligands bridge two metal centers, thus giving rise to dinuclear (2, 4, 5, and 6) or polynuclear structures (1 and 3). The role played by the counteranions is also of relevance, because dimeric structures are invariably obtained with NO3(-) (4, 5, and 6), whereas the less-coordinating BF4(-) counteranion affords polymeric structures (1 and 3). Also, through atoms-in-molecules (AIM) analysis of the electron density, an argentophilic Ag···Ag interaction is found in complexes 2 and 4. Thermogravimetric analysis (TGA) shows that the thermolytic properties of the present complexes can be significantly modified by altering the ligand structure and counteranion. These complexes were further investigated as thin silver film precursors by spin-coating solutions, followed by annealing at 310 °C on 52100 steel substrates. The resulting polycrystalline cubic-phase Ag films of â¼55 nm thickness exhibit low levels of extraneous element contamination by X-ray photoelectron spectroscopy (XPS). Atomic force microscopy (AFM) and scanning electron microscopy (SEM) indicate that film growth proceeds primarily via an island growth (Volmer-Weber) mechanism. Complex 4 was also evaluated as a lubricant additive in ball-on-disk tribological tests. The results of the friction evaluation and wear measurements indicate a significant reduction in wear (â¼ 88%) at optimized Ag complex concentrations with little change in friction. The enhanced wear performance is attributed to facile shearing of Ag metal in the contact region, resulting from thermolysis of the silver complexes, and is confirmed by energy-dispersive X-ray analysis of the resulting wear scars.
Asunto(s)
Piridinas/síntesis química , Compuestos de Plata/síntesis química , Cristalografía por Rayos X , Microscopía Electrónica de Rastreo , Modelos Moleculares , Espectroscopía de Protones por Resonancia Magnética , Piridinas/química , Compuestos de Plata/química , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
Copper iodide (CuI) has garnered considerable attention as a promising alternative to p-type transparent conducting oxides owing to its low cation vacancy formation energy, shallow acceptor level, and readily modifiable conductivity via doping. Although sulfur (S) doping through liquid iodination has exhibited high efficacy in enhancing the conductivity with record high figure of merit (FOM) of 630 00 MΩ-1, solution-processed S-doped CuI (CuI:S) for low-cost large area fabrication has yet to be explored. Here, a highly conducting CuI:S thin-film for p-type transparent conducting electrode (TCE) is reported using low temperature solution-processing with thiourea derivatives. The optimization of thiourea dopant is determined through a comprehensive acid-base study, considering the effects of steric hindrance. The modification of active groups of thioureas facilitated a varying carrier concentration range of 9 × 1018-2.52 × 1020 cm-3 and conductivities of 4.4-390.7 S cm-1. Consequently, N-ethylthiourea-doped CuI:S exhibited a FOM value of 7 600 MΩ-1, which is the highest value among solution-processed p-type TCEs to date. Moreover, the formulation of CuI:S solution for highly conductive p-type TCEs can be extended to CuI:S inks, facilitating high-throughput solution-processes such as inkjet printing and spray coating.
RESUMEN
The emergence of high-form-factor electronics has led to a demand for high-density integration of inorganic thin-film devices and circuits with full stretchability. However, the intrinsic stiffness and brittleness of inorganic materials have impeded their utilization in free-form electronics. Here, we demonstrate highly integrated strain-insensitive stretchable metal-oxide transistors and circuitry (442 transistors/cm2) via a photolithography-based bottom-up approach, where transistors with fluidic liquid metal interconnection are embedded in large-area molecular-tailored heterogeneous elastic substrates (5 × 5 cm2). Amorphous indium-gallium-zinc-oxide transistor arrays (7 × 7), various logic gates, and ring-oscillator circuits exhibited strain-resilient properties with performance variation less than 20% when stretched up to 50% and 30% strain (10,000 cycles) for unit transistor and circuits, respectively. The transistors operate with an average mobility of 12.7 ( ± 1.7) cm2 V-1s-1, on/off current ratio of > 107, and the inverter, NAND, NOR circuits operate quite logically. Moreover, a ring oscillator comprising 14 cross-wired transistors validated the cascading of the multiple stages and device uniformity, indicating an oscillation frequency of ~70 kHz.
RESUMEN
In oxide semiconductors, such as those based on indium zinc oxide (IXZO), a strong oxygen binding metal ion ("oxygen getter"), X, functions to control O vacancies and enhance lattice formation, hence tune carrier concentration and transport properties. Here we systematically study, in the IXZO series, the role of X = Ga(3+) versus the progression X = Sc(3+) â Y(3+) â La(3+), having similar chemical characteristics but increasing ionic radii. IXZO films are prepared from solution over broad composition ranges for the first time via low-temperature combustion synthesis. The films are characterized via thermal analysis of the precursor solutions, grazing incidence angle X-ray diffraction (GIAXRD), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and scanning transmission electron microscopy (STEM) with high angle annular dark field (HAADF) imaging. Excellent thin-film transistor (TFT) performance is achieved for all X, with optimal compositions after 300 °C processing exhibiting electron mobilities of 5.4, 2.6, 2.4, and 1.8 cm(2) V(-1) s(-1) for Ga(3+), Sc(3+), Y(3+), and La(3+), respectively, and with I(on)/I(off) = 10(7)-10(8). Analysis of the IXZO TFT positive bias stress response shows X = Ga(3+) to be superior with mobilities (µ) retaining >95% of the prestress values and threshold voltage shifts (ΔV(T)) of <1.6 V, versus <85% µ retention and ΔV(T) ≈ 20 V for the other trivalent ions. Detailed microstructural analysis indicates that Ga(3+) most effectively promotes oxide lattice formation. We conclude that the metal oxide lattice formation enthalpy (ΔH(L)) and metal ionic radius are the best predictors of IXZO oxygen getter efficacy.
RESUMEN
Solution-processed metal-oxide thin-film transistors (TFTs) with different metal compositions are investigated for ex situ and in situ radiation hardness experiments against ionizing radiation exposure. The synergetic combination of structural plasticity of Zn, defect tolerance of Sn, and high electron mobility of In identifies amorphous zinc-indium-tin oxide (Zn-In-Sn-O or ZITO) as an optimal radiation-resistant channel layer of TFTs. The ZITO with an elemental blending ratio of 4:1:1 for Zn/In/Sn exhibits superior ex situ radiation resistance compared to In-Ga-Zn-O, Ga-Sn-O, Ga-In-Sn-O, and Ga-Sn-Zn-O. Based on the in situ irradiation results, where a negative threshold voltage shifts and a mobility increase as well as both off current and leakage current increase are observed, three factors are proposed for the degradation mechanisms: (i) increase of channel conductivity, (ii) interface-trapped and dielectric-trapped charge buildup, and (iii) trap-assisted tunneling in the dielectric. Finally, in situ radiation-hard oxide-based TFTs are demonstrated by employing a radiation-resistant ZITO channel, a thin dielectric (50 nm SiO2), and a passivation layer (PCBM for ambient exposure), which exhibit excellent stability with an electron mobility of â¼10 cm2/V s and aΔVth of <3 V under real-time (15 kGy/h) gamma-ray irradiation in an ambient atmosphere.
RESUMEN
Hemispherical image sensors simplify lens designs, reduce optical aberrations, and improve image resolution for compact wide-field-of-view cameras. To achieve hemispherical image sensors, organic materials are promising candidates due to the following advantages: tunability of optoelectronic/spectral response and low-temperature low-cost processes. Here, a photolithographic process is developed to prepare a hemispherical image sensor array using organic thin film photomemory transistors with a density of 308 pixels per square centimeter. This design includes only one photomemory transistor as a single active pixel, in contrast to the conventional pixel architecture, consisting of select/readout/reset transistors and a photodiode. The organic photomemory transistor, comprising light-sensitive organic semiconductor and charge-trapping dielectric, is able to achieve a linear photoresponse (light intensity range, from 1 to 50 W m-2 ), along with a responsivity as high as 1.6 A W-1 (wavelength = 465 nm) for a dark current of 0.24 A m-2 (drain voltage = -1.5 V). These observed values represent the best responsivity for similar dark currents among all the reported hemispherical image sensor arrays to date. A transfer method was further developed that does not damage organic materials for hemispherical organic photomemory transistor arrays. These developed techniques are scalable and are amenable for other high-resolution 3D organic semiconductor devices.
RESUMEN
We report the implementation of amorphous indium yttrium oxide (a-IYO) as a thin-film transistor (TFT) semiconductor. Amorphous and polycrystalline IYO films were grown via a low-temperature solution process utilizing exothermic "combustion" precursors. Precursor transformation and the IYO films were analyzed by differential thermal analysis, thermogravimetric analysis, X-ray diffraction, atomic force microscopy, X-ray photoelectron spectroscopy, and optical transmission, which reveal efficient conversion to the metal oxide lattice and smooth, transparent films. a-IYO TFTs fabricated with a hybrid nanodielectric exhibit electron mobilities of 7.3 cm(2) V(-1) s(-1) (T(anneal) = 300 °C) and 5.0 cm(2) V(-1) s(-1) (T(anneal) = 250 °C) for 2 V operation.
RESUMEN
Delayed ignition of combustion synthesis precursors can significantly lower metal oxide film formation temperatures. From bulk In(2)O(3) precursor analysis, it is shown here that ignition temperatures can be lowered by as much as 150 °C. Thus, heat generation from ~60 nm thick In(2)O(3) films is sufficient to form crystalline In(2)O(3) films at 150 °C. Furthermore, we show that the low processing temperatures of sufficiently thick combustion precursor films can be applied to the synthesis of metal oxide nanocomposite films from nanomaterials overcoated/impregnated with the appropriate combustion precursor. The resulting, electrically well-connected nanocomposites exhibit significant enhancements in charge-transport properties vs conventionally processed oxide films while maintaining desirable intrinsic electronic properties. For example, while ZnO nanorod-based thin-film transistors exhibit an electron mobility of 10(-3)-10(-2) cm(2) V(-1) s(-1), encasing these nanorods within a ZnO combustion precursor-derived matrix enhances the electron mobility to 0.2 cm(2) V(-1) s(-1). Using commercially available ITO nanoparticles, the intrinsically high carrier concentration is preserved during nanocomposite film synthesis, and an ITO nanocomposite film processed at 150 °C exhibits a conductivity of ~10 S cm(-1) without post-reductive processing.
RESUMEN
The development of large-area, low-cost electronics for flat-panel displays, sensor arrays, and flexible circuitry depends heavily on high-throughput fabrication processes and a choice of materials with appropriate performance characteristics. For different applications, high charge carrier mobility, high electrical conductivity, large dielectric constants, mechanical flexibility or optical transparency may be required. Although thin films of metal oxides could potentially meet all of these needs, at present they are deposited using slow and equipment-intensive techniques such as sputtering. Recently, solution processing schemes with high throughput have been developed, but these require high annealing temperatures (T(anneal)>400 °C), which are incompatible with flexible polymeric substrates. Here we report combustion processing as a new general route to solution growth of diverse electronic metal oxide films (In(2)O(3), a-Zn-Sn-O, a-In-Zn-O, ITO) at temperatures as low as 200 °C. We show that this method can be implemented to fabricate high-performance, optically transparent transistors on flexible plastic substrates.
RESUMEN
Indoor air filtration received significant attention owing to the growing threat to the environment and human health caused by air pollutants such as volatile organic compound (VOC) gases. However, owing to the limited adsorption capacity of VOC adsorbents, such as activated carbon, a rapid breakthrough can occur, reducing the service life of the filter. Therefore, TiO2-coated zeolite (TiO2/zeolite) was utilized as a photo-regenerative VOC adsorbent to increase the service life of VOC filters. In particular, with photoactive TiO2 forms on zeolite, efficient and repetitive photo-regeneration is attainable through the dissociation of VOC molecules by the photocatalytic reaction. We optimized the TiO2 coating amount to obtain TiO2/zeolite particles with a high surface area (BET surface area > 500 m2/g) and high adsorption capacity. A VOC filter with an adsorption efficiency of 72.1% for formaldehyde was realized using TiO2/zeolite as the adsorbent. Furthermore, the TiO2/zeolite filter exhibits a photo-regeneration efficiency of >90% for the initial two regeneration cycles using ultraviolet illumination, and >60% up to five cycles. Based on these observations, we consider that TiO2/zeolite is a potential adsorbent candidate for photo-regenerative VOC filters.
RESUMEN
Chalcogenide aerogels (chalcogels) are amorphous structures widely known for their lack of localized structural control. This study, however, demonstrates a precise multiscale structural control through a thiostannate motif ([Sn2S6]4-)-transformation-induced self-assembly, yielding Na-Mn-Sn-S, Na-Mg-Sn-S, and Na-Sn(II)-Sn(IV)-S aerogels. The aerogels exhibited [Sn2S6]4-:Mn2+ stoichiometric-variation-induced-control of average specific surface areas (95-226 m2 g-1), thiostannate coordination networks (octahedral to tetrahedral), phase crystallinity (crystalline to amorphous), and hierarchical porous structures (micropore-intensive to mixed-pore state). In addition, these chalcogels successfully adopted the structural motifs and ion-exchange principles of two-dimensional layered metal sulfides (K2xMnxSn3-xS6, KMS-1), featuring a layer-by-layer stacking structure and effective radionuclide (Cs+, Sr2+)-control functionality. The thiostannate cluster-based gelation principle can be extended to afford Na-Mg-Sn-S and Na-Sn(II)-Sn(IV)-S chalcogels with the same structural features as the Na-Mn-Sn-S chalcogels (NMSCs). The study of NMSCs and their chalcogel family proves that the self-assembly principle of two-dimensional chalcogenide clusters can be used to design unique chalcogels with unprecedented structural hierarchy.
RESUMEN
Color-selective multifunctional and multiplexed photodetectors have attracted considerable interest with the increasing demand for color filter-free optoelectronics which can simultaneously process multispectral signal via minimized system complexity. The low efficiency of color-filter technology and conventional laterally pixelated photodetector array structures often limit opportunities for widespread realization of high-density photodetectors. Here, low-temperature solution-processed vertically stacked full color quantum dot (QD) phototransistor arrays are developed on plastic substrates for high-resolution color-selective photosensor applications. Particularly, the three different-sized/color (RGB) QDs are vertically stacked and pixelated via direct photopatterning using a unique chelating chalcometallate ligand functioning both as solubilizing component and, after photoexposure, a semiconducting cement creating robust, insoluble, and charge-efficient QD layers localized in the a-IGZO transistor region, resulting in efficient wavelength-dependent photo-induced charge transfer. Thus, high-resolution vertically stacked full color QD photodetector arrays are successfully implemented with the density of 5500 devices cm-2 on ultrathin flexible polymeric substrates with highly photosensitive characteristics such as photoresponsivity (1.1 × 104 AW-1 ) and photodetectivity (1.1 × 1018 Jones) as well as wide dynamic ranges (>150 dB).
RESUMEN
Molybdenum disulfide (MoS2)-based materials are extensively studied as promising hydrogen evolution reaction (HER) catalysts. In order to bring out the full potential of chalcogenide chemistry, precise control over the active sulfur sites and enhancement of electronic conductivity need to be achieved. This study develops a highly active HER catalyst with an optimized active site-controlled cobalt molybdenum sulfide (CoMo3S13) chalcogel/graphene oxide aerogel heterostructure. The highly active CoMo3S13 chalcogel catalyst was achieved by the synergetic catalytic sites of [Mo3S13]2- and the Mo-S-Co bridge. The optimized GO/CoMo3S13 chalcogel heterostructure catalyst exhibited high catalytic HER performance with an overvoltage of 130 mV, a current density of 10 mA cm-2, a small Tafel slope of 40.1 mV dec-1, and remarkable stability after 12 h of testing. This study presents a successful example of a synergistic heterostructure exploiting both the appealing electrical functionality of GO and catalytically active [Mo3S13]2- sites.