RESUMEN
Highly strained films of BiFe0.5Mn0.5O3 (BFMO) grown at very low rates by pulsed laser deposition were demonstrated to exhibit both ferrimagnetism and ferroelectricity at room temperature and above. Magnetisation measurements demonstrated ferrimagnetism (TC â¼ 600K), with a room temperature saturation moment (MS ) of up to 90 emu/cc (â¼ 0.58 µB /f.u) on high quality (001) SrTiO3. X-ray magnetic circular dichroism showed that the ferrimagnetism arose from antiferromagnetically coupled Fe3+ and Mn3+. While scanning transmission electron microscope studies showed there was no long range ordering of Fe and Mn, the magnetic properties were found to be strongly dependent on the strain state in the films. The magnetism is explained to arise from one of three possible mechanisms with Bi polarization playing a key role. A signature of room temperature ferroelectricity in the films was measured by piezoresponse force microscopy and was confirmed using angular dark field scanning transmission electron microscopy. The demonstration of strain induced, high temperature multiferroism is a promising development for future spintronic and memory applications at room temperature and above.
RESUMEN
As a result of the availability of modern software and hardware, Bayesian analysis is becoming more popular in neutron and X-ray reflectometry analysis. The understandability and replicability of these analyses may be harmed by inconsistencies in how the probability distributions central to Bayesian methods are represented in the literature. Herein advice is provided on how to report the results of Bayesian analysis as applied to neutron and X-ray reflectometry. This includes the clear reporting of initial starting conditions, the prior probabilities, the results of any analysis and the posterior probabilities that are the Bayesian equivalent of the error bar, to enable replicability and improve understanding. It is believed that this advice, grounded in the authors' experience working in the field, will enable greater analytical reproducibility in the work of the reflectometry community, and improve the quality and usability of results.
RESUMEN
We report the magnitude of the induced magnetic moment in CVD-grown epitaxial and rotated-domain graphene in proximity with a ferromagnetic Ni film, using polarized neutron reflectivity (PNR) and X-ray magnetic circular dichroism (XMCD). The XMCD spectra at the C K-edge confirm the presence of a magnetic signal in the graphene layer, and the sum rules give a magnetic moment of up to â¼0.47 µB/C atom induced in the graphene layer. For a more precise estimation, we conducted PNR measurements. The PNR results indicate an induced magnetic moment of â¼0.41 µB/C atom at 10 K for epitaxial and rotated-domain graphene. Additional PNR measurements on graphene grown on a nonmagnetic Ni9Mo1 substrate, where no magnetic moment in graphene is measured, suggest that the origin of the induced magnetic moment is due to the opening of the graphene's Dirac cone as a result of the strong C pz-Ni 3d hybridization.
RESUMEN
The effect of the stacking sequence on magnetic and superconducting properties in La0.67Sr0.33MnO3 (LSMO)/YBa2Cu3O7-δ (YBCO) and LSMO/SrTiO3/YBCO heterostructures, which consequently affected the magnetic proximity effect (MPE), was investigated using spin-polarized neutron reflectivity experiments. The results established the intrinsic nature of MPE and its correlation with stacking sequence-dependent magnetic and superconducting properties in these oxide heterostructure systems. We found an increase in the superconducting transition temperature (Tsc) and magnetization for both of the heterostructures as compared to heterostructures with a reversed stacking order. The evolution of the magnetization of the interfacial ferromagnetic (FM) layer, studied as a function of temperature for both heterostructures, showed a decrease in the MPE-induced magnetic depleted layer thickness for heterostructures at a higher Tsc. A comparison of the results of different studies with the present results suggested that the average magnetization and transition temperatures of a FM and a superconductor (SC) were important parameters that dictate the strength of the proximity effect due to the complex interaction of SC and FM in these systems. Tuning the strength of MPE in FM/SC and FM/I/SC oxide heterostructures may provide a promising platform for the effective realization of devices.
RESUMEN
All-oxide-based synthetic antiferromagnets (SAFs) are attracting intense research interest due to their superior tunability and great potentials for antiferromagnetic spintronic devices. In this work, using the La2/3Ca1/3MnO3/CaRu1/2Ti1/2O3 (LCMO/CRTO) superlattice as a model SAF, we investigated the layer-resolved magnetic reversal mechanism by polarized neutron reflectivity. We found that the reversal of LCMO layer moments is mediated by nucleation, expansion, and shrinkage of a magnetic soliton. This unique magnetic reversal process creates a reversed magnetic configuration of the SAF after a simple field cycling. Therefore, it can enable vertical data transfer from the bottom to the top of the superlattice. The physical origin of this intriguing magnetic reversal process could be attributed to the cooperation of the surface spin-flop effect and enhanced uniaxial magnetic anisotropy of the bottom LCMO layer. This work may pave a way to utilize all-oxide-based SAFs for three-dimensional spintronic devices with vertical data transfer and high-density data storage.
RESUMEN
We present a comprehensive study on the magnetization reversal in the Fe/NiFe bilayer system by alternating the order of the magnetic layers. All the samples show growth-induced uniaxial magnetic anisotropy due to the oblique angle deposition technique. Strong interfacial exchange coupling between the Fe and NiFe layers leads to single-phase hysteresis loops in the bilayer system. The strength of coupling being dependent on the interface changes upon alternating the order of magnetic layers. The magnetic parameters such as coercivity H C, and anisotropy field H K become almost doubled when a NiFe layer is grown over the Fe layers. This enhancement in the magnetic parameters is primarily dependent on the increase of the thickness and magnetic moment of the Fe-NiFe interfacial layer as revealed from the polarized neutron reflectivity (PNR) data of the bilayer samples. The difference in the thickness and magnetization of the Fe-NiFe interfacial layer indicates the modification of the microstructure by alternating the order of the magnetic layers of the bilayers. The interfacial magnetic moment increased by almost 18% when the NiFe layer was grown over the Fe layer. In spite of the different values of anisotropy fields and modified interfacial exchange coupling, the Gilbert damping constant values of the ferromagnetic bilayers remain similar to the single NiFe layer.
RESUMEN
Chemically engineered interfaces are shown to produce inversions of the magnetoresistance in spintronic devices including lithium fluoride interlayers. This behavior is explained by the formation of anti-ferromagnetic difluoride layers. By changing the order of deposition of the different materials, the sign of the magnetoresistance can be deterministically controlled both in organic spin valves and in inorganic magnetic tunnel junctions.
RESUMEN
We have used Soxhlet solvent purification to fractionate a broad molecular weight distribution of the polycarbazole polymer PCDTBT into three lower polydispersity molecular weight fractions. Organic photovoltaic devices were made using a blend of the fullerene acceptor PC71BM with the molecular weight fractions. An average power conversion efficiency of 5.89% (peak efficiency of 6.15%) was measured for PCDTBT blend devices with a number average molecular weight of Mn = 25.5 kDa. There was significant variation between the molecular weight fractions with low (Mn = 15.0 kDa) and high (Mn = 34.9 kDa) fractions producing devices with average efficiencies of 5.02% and 3.70% respectively. Neutron reflectivity measurements on these polymer:PC71BM blend layers showed that larger molecular weights leads to an increase in the polymer enrichment layer thickness at the anode interface, this improves efficiency up to a limiting point where the polymer solubility causes a reduction of the PCDTBT concentration in the active layer.