Impact of environmental storage conditions on properties and stability of a smart bilayer film.

This study aimed to investigate the behavior of smart bilayer films under various temperature and relative humidity (RH). Smart bilayer films were fabricated using sodium alginate with incorporated butterfly pea anthocyanin and agar containing catechin-lysozyme. Cellulose nanospheres were added at concentrations of 0% and 10% w/w of the film and subjected to test at 4 °C and 25 °C, considering different RHs (0%, 50%, and 80%). The results showed that RH had a greater impact on the mechanical properties than temperature, leading to a decrease in tensile strength and an increase in elongation at break with higher RH. The films displayed increased strength but reduced flexibility at low temperatures. Oxygen permeability was negatively affected by increasing RH, while water vapor barrier properties were better at 25 °C than at 4 °C. In terms of color stability, the temperature played a more important role, with both types of smart bilayer films retaining their color stability throughout 14-day storage at 4 °C, even maintaining their ability to change color with pH. However, the films stored at 25 °C exhibited lower color stability and showed potential for color change with varying pH levels, but with lower intensity. The findings of this study demonstrate the significant impact of temperature and RH on the functional properties of smart bilayer films, with and without the addition of cellulose nanospheres. Such smart bilayer films have great potential for various applications, particularly in food packaging, where maintaining color, mechanical, and barrier properties under varying environmental conditions is crucial.

Potential of jackfruit inner skin fibre for encapsulation of probiotics on their stability against adverse conditions.

The aim of this study was to investigate the impact of jackfruit inner skin fibre (JS) incorporated with whey protein isolate (WPI) and soybean oil (SO) as a wall material for probiotic encapsulation to improve probiotic stability against freeze-drying and gastrointestinal (GI) tract conditions. Bifidobacterium bifidum TISTR2129, Bifidobacterium breve TISTR2130, and Lactobacillus acidophilus TISTR1338 were studied in terms of SCFA production and the antibiotic-resistant profile and in an antagonistic assay to select suitable strains for preparing a probiotic cocktail, which was then encapsulated. The results revealed that B. breve and L. acidophilus can be used effectively as core materials. JS showed the most influential effect on protecting probiotics from freeze-drying. WPI:SO:JS at a ratio of 3.9:2.4:3.7 was the optimized wall material, which provided an ideal formulation with 83.1 ± 6.1% encapsulation efficiency. This formulation presented > 50% probiotic survival after exposure to gastro-intestinal tract conditions. Up to 77.8 ± 0.1% of the encapsulated probiotics survived after 8 weeks of storage at refrigeration temperature. This study highlights a process and formulation to encapsulate probiotics for use as food supplements that could provide benefits to human health as well as an alternative approach to reduce agricultural waste by increasing the value of jackfruit inner skin.

Optimization of Ethanolic Extraction of Phenolic Antioxidants from Lychee and Longan Seeds Using Response Surface Methodology.

Lychee seeds (LS) and longan seeds (LoS) are excellent sources of phenolic compounds (PCs) with strong antioxidant activity (AOA). The aim of this study was to optimize the extraction conditions regarding extraction yield (EY), extractable phenolic compound (EPC), and AOA from LS and LoS using surface response methodology (RSM). Solvent concentration, extraction temperature, time, and solid to liquid ratio were optimized using RSM. Increasing the solid to solvent ratio from 1:05 to 1:40 (w/v), increased EY for LoS, however, EY did not change from 1:20 to 1:40 for LS. Solid-liquid ratio 1:20 was chosen for this study. Increasing the quantity of solvent leads to higher EPC and FRAP. The results showed that LoS exhibited higher AOA than LS measured as DPPH, ABTS, and FRAP, respectively. Ethanol concentrations and temperatures significantly (p < 0.05) affect EY, EPC, and AOA. The results (R2 > 0.85) demonstrated a good fit to the suggested models and a strong correlation between the extraction conditions and the phenolic antioxidant responses. The ethanol concentrations of 41 and 53%, temperatures of 51 and 58 °C, and the corresponding times of 139 and 220 min were the optimal conditions that maximized the EY, EPC, and AOA from LS and LoS.

Pineapple-Leaf-Derived, Copper-PAN-Modified Regenerated Cellulose Sheet Used as a Hydrogen Sulfide Indicator.

Regenerated cellulose (RC) produced from waste pineapple leaves was used to develop a colorimetric sensor as a Cu-PAN sheet (RCS). Microcrystalline cellulose derived from dried pineapple leaves was combined with Cu-PAN, dissolved in NaOH and urea, and made into an RC sheet using Na2SO4 as a coagulant. The RCS was used as an H2S indicator at various H2S concentrations (0-50 ppm) and temperatures (5-25 °C). The RCS color changed from purple to New York pink when exposed to H2S. A colorimeter method was used to develop prediction curves with values of R2 > 0.95 for H2S concentrations at 5-25 °C. The physicochemical properties of fresh and spent RCS were characterized using various techniques (Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy/energy-dispersive X-ray spectroscopy, and thermogravimetric analysis). In addition, when stored at 5 and 25 °C for 90 days, the RCS had outstanding stability. The developed RCS could be applied to food packaging as an intelligent indicator of meat spoilage.

Ultrasound-assisted extraction of protein from Bombay locusts and its impact on functional and antioxidative properties.

Impact of ultrasound-assisted process (UAP) on yield, functional properties, antioxidant properties and molecular characteristics of protein extracted from Bombay locusts (BL) (Patanga succinta L.) was studied. Different conditions of UAP were implemented for different amplitudes (40-60%) and times (10-30 min) during aqueous extraction. Notably, UAP could enhance yield and protein recovery, compared with those from typical process (TP) (continuously stirred at 100 rpm at room temperature for 1 h). UAP conditions used governed the change of surface hydrophobicity and free α-amino content of BL. UAP could improve solubility of BL, especially at pH levels higher than 2. UAP had no significant (p > 0.05) detrimental effects on foaming capacity and stability of BL. Nevertheless, UAP, particularly at 50-60% amplitudes, affected the emulsion activity and stability of BL. UAP provided BL with high radical scavenging activities and good electron donating ability, especially that from 60% amplitude for 20 min (UAP-60/20). UAP-60/20 showed the impact on change of isoelectric point and molecular characteristic monitored by Fourier transform infrared (FTIR) of BL, compared to those from TP. In addition, BL was also an excellent source of both essential and nonessential amino acids. Therefore, UAP potentially enhanced BL extraction efficiency, resulting the BL with good functional and antioxidative properties.