RESUMEN
The goal of this study was to assess the oxidation of NAPL in soil, 30% of which were composed of chlorinated ethanes and ethenes, using catalyzed hydrogen peroxide (CHP), activated persulfate (AP), and H(2)O(2)-persulfate (HP) co-amendment systems. Citrate, a buffer and iron ligand, was amended to the treatment system to enhance oxidative treatment. Four activation/catalysis methods were employed: (1) oxidant only, (2) oxidant-citrate, (3) oxidant-iron(II), and (4) oxidant-citrate-iron(II). The NAPL treatment effectiveness was the greatest in the CHP reactions, the second in HP, and the third in AP. The effective activation and catalysis methods depended on the oxidant types; oxidant only for CHP and HP and oxidant-citrate-iron for AP. The treatability trend of chlorinated ethanes and ethenes in the soil mixture was as follows: trichloroethene > tetrachloroethene > dichloroethane > trichloroethane > tetrachloroethane. A significant fraction of persulfate remained in the oxidation systems after the 2-day reaction period, especially in the citrate-iron(II) AP. In general, oxidation systems that included citrate maintained a post-treatment pH in the range of 7-9. A final pH of AP oxidation systems was acidic (pH 2-3), where a molar ratio of citrate-iron(II) was less than 1.8 and where no citrate was amended.
Asunto(s)
Restauración y Remediación Ambiental , Hidrocarburos Clorados/química , Peróxido de Hidrógeno/química , Compuestos de Sodio/química , Contaminantes del Suelo/química , Sulfatos/química , Ácido Cítrico/química , Concentración de Iones de Hidrógeno , Oxidación-ReducciónRESUMEN
Water desalination using membrane technology is one of the main technologies to resolve water pollution and scarcity issues. In the membrane treatment process, mineral scale deposition and fouling is a severe challenge that can lead to filtration efficiency decrease, permeate quality compromise, and even membrane damage. Multiple methods have been developed to resolve this problem, such as scale inhibitor addition, product recovery ratio adjustment, periodic membrane surface flushing. The performance of these methods largely depends on the ability to accurately predict the kinetics of mineral scale deposition and fouling with or without inhibitors. Gypsum is one of the most common and troublesome inorganic mineral scales in membrane systems, however, no mechanistic model is available to accurately predict the induction time of gypsum crystallization and inhibition. In this study, a new gypsum crystallization and inhibition model based on the classical nucleation theory and a Langmuir type adsorption isotherm has been developed. Through this model, it is believed that gypsum nucleation may gradually transit from homogeneous to heterogeneous nucleation when the gypsum saturation index (SI) decreases. Such transition is represented by a gradual decrease of surface tension at smaller SI values. This model assumes that the adsorption of inhibitors onto the gypsum nucleus can increase the nucleus superficial surface tension and prolong the induction time. Using the new model, this study accurately predicted the gypsum crystallization induction times with or without nine commonly used scale inhibitors over wide ranges of temperature (25-90 °C), SI (0.04-0.96), and background NaCl concentration (0-6 mol/L). The fitted affinity constants between scale inhibitors and gypsum show a good correlation with those between the same inhibitors and barite, indicating a similar inhibition mechanism via adsorption. Furthermore, by incorporating this model with the two-phase mineral deposition model our group developed previously, this study accurately predicts the gypsum deposition time on the membrane material surfaces reported in the literature. We believe that the model developed in this study can not only accurately predict the gypsum crystallization induction time with or without scale inhibitors, elucidate the gypsum crystallization and inhibition mechanisms, but also optimize the mineral scale control in the membrane filtration system.
Asunto(s)
Sulfato de Calcio , Cloruro de Sodio , Sulfato de Calcio/química , Sulfato de Bario , Agua/química , MineralesRESUMEN
BACKGROUND: Aminoacyl tRNA transferases play an essential role in protein biosynthesis, and variants of these enzymes result in various human diseases. FARSA, which encodes the α subunit of cytosolic phenylalanyl-tRNA synthetase, was recently reported as a suspected causal gene for multiorgan disorder. This study aimed to validate the pathogenicity of variants in the FARSA gene. RESULTS: Exome sequencing revealed novel compound heterozygous variants in FARSA, P347L and R475Q, from a patient who initially presented neonatal-onset failure to thrive, liver dysfunction, and frequent respiratory infections. His developmental milestones were nearly arrested, and the patient died at 28 months of age as a result of progressive hepatic and respiratory failure. The P347L variant was predicted to disrupt heterodimer interaction and failed to form a functional heterotetramer by structural and biochemical analyses. R475 is located at a highly conserved site and is reported to be involved in phenylalanine activation and transfer to tRNA. The R475Q mutant FARSA were co-purified with FARSB, but the mutant enzyme showed an approximately 36% reduction in activity in our assay relative to the wild-type protein. Additional functional analyses on variants from previous reports (N410K, F256L, R404C, E418D, and F277V) were conducted. The R404C variant from a patient waiting for organ transplantation also failed to form tetramers but the E418D, N410K, F256L, and F277V variants did not affect tetramer formation. In the functional assay, the N410K located at the phenylalanine-binding site exhibited no catalytic activity, whereas other variants (E418D, F256L and F277V) exhibited lower ATPase activity than wild-type FARSA at low phenylalanine concentrations. CONCLUSIONS: Our data demonstrated the pathogenicity of biallelic variants in FARSA and suggested the implication of hypomorphic variants in severe phenotypes.
Asunto(s)
Fenilalanina-ARNt Ligasa , Humanos , Recién Nacido , Mutación/genética , Fenilalanina , Fenilalanina-ARNt Ligasa/química , Fenilalanina-ARNt Ligasa/genética , ARN de Transferencia/genética , Secuenciación del ExomaRESUMEN
Superparamagnetic nanoparticles (SPMNPs) have attracted interest for various biomedical applications due to their unique magnetic behavior, excellent biocompatibility, easy surface modification, and low cost. Their unique magnetic properties, superparamagnetism, and magnetophoretic mobility have led to their inclusion in immunoassays to enhance biosensor sensitivity and allow for rapid detection of various analytes. In this review, we describe SPMNP characteristics valuable for incorporation into biosensors, including the use of SPMNPs to increase detection capabilities of surface plasmon resonance and giant magneto-resistive biosensors. The current status of SPMNP-based immunoassays to improve the sensitivity of rapid diagnostic tests is reviewed, and suggested strategies for the successful adoption of SPMNPs for immunoassays are presented.
RESUMEN
The methods and results of the first field-scale demonstration of polymer-amended in situ chemical oxidation (PA-ISCO) are presented. The demonstration took place at MCB CAMLEJ (Marine Corps Base, Camp Lejeune) Operable Unit (OU) 15, Site 88, in Camp Lejeune, North Carolina between October and December 2010. PA-ISCO was developed as an alternative treatment approach that utilizes viscosity-modified fluids to improve the in situ delivery and distribution (i.e. sweep-efficiency) of chemical oxidants within texturally heterogeneous contaminated aquifers. The enhanced viscosity of the fluid mitigates the effects of preferential flows, improving sweep-efficiency and enhancing the subsurface contact between the injected oxidant and the target contamination within the treatment zone. The PA-ISCO fluid formulation used in this demonstration included sodium permanganate as oxidant, xanthan gum biopolymer as a shear-thinning viscosifier, and sodium hexametaphosphate (SHMP) as an anti-coagulant. It was the goal of this demonstration to validate the utility of PA-ISCO within a heterogeneous aquifer. An approximate 100% improvement in sweep-efficiency was achieved for the PA-ISCO fluid, as compared to a permanganate-only injection within an adjacent control plot.
Asunto(s)
Restauración y Remediación Ambiental/métodos , Agua Subterránea/química , Oxidantes/química , Polímeros/química , Contaminantes Químicos del Agua/análisis , Compuestos de Manganeso/química , Modelos Teóricos , North Carolina , Oxidación-Reducción , Óxidos/química , Fosfatos/química , Estaciones del Año , Compuestos de Sodio/química , ViscosidadRESUMEN
In this paper, we present settling experiments and mathematical modeling to study the magnetic separation of superparamagnetic iron-oxide nanoparticles (SPIONs) from a brine. The experiments were performed using SPIONs suspensions of concentration between 3 and 202g/L dispersed in water and separated from the liquid under the effect of a permanent magnet. A 1D model was developed in the framework of the sedimentation theory with a conservation law for SPIONs and a mass flux function based on the Newton's law for motion in a magnetic field. The model describes both the hindering effect of suspension concentration (n) during settling due to particle collisions and the increase in settling rate due to the attraction of the SPIONs towards the magnet. The flux function was derived from the settling experiments and the numerical model validated against the analytical solution and the experimental data. Suspensions of SPIONs were of 2.8cm initial height, placed on a magnet, and monitored continuously with a digital camera. Applying a magnetic field of 0.5T of polarization, the SPION's velocity was of approximately 3·10(-5)m/s close to the magnet and decreases of two orders of magnitude across the domain. The process was characterized initially by a classical sedimentation behavior, i.e., an upper interface between the clear water and the suspension slowly moving towards the magnet and a lower interface between the sediment layer and the suspension moving away from the magnet. Subsequently, a rapid separation of nanoparticle occured suggesting a non-classical settling phenomenon induced by magnetic forces which favor particle aggregation and therefore faster settling. The rate of settling decreased with n and an optimal condition for fast separation was found for an initial n of 120g/L. The model agrees well with the measurements in the early stage of the settling, but it fails to describe the upper interface movement during the later stage, probably because of particle aggregation induced by magnetization which is not accounted for in the model.
RESUMEN
Analytical artifacts attributed to the bromination of toluene, xylenes, and trimethylbenzenes were found during the heated headspace gas chromatography/mass spectrometry (GC/MS) analysis of aqueous samples. The aqueous samples were produced from Fenton-like chemical oxidation reactions and contained aromatic compounds, hydrogen peroxide (H2O2), and ferric sulfate. Prior to GC/MS headspace analysis, the samples were acidified (pH<2), and sodium chloride was amended to the headspace vial as a matrix modifier. The brominated artifacts were generated during heated headspace analysis. Further, when samples were spiked with a mixture of volatile chlorinated and aromatic compounds (50 µg/L), poor spike recoveries of toluene and xylenes occurred, and in some cases complete loss of trimethylbenzenes and naphthalene resulted. Where poor recovery of aromatic spike compounds occurred, brominated aromatic compounds were found. The only significant source of bromine in the reaction scheme is the bromide typically present (<0.01% w/w) in the sodium chloride amended to the samples. Conversely, brominated artifacts were absent when a buffered salt mixture composed of sodium chloride and potassium phosphate dibasic/monobasic was used as a matrix modifier and raised the sample pH (pH~6). This indicated that the brominated artifacts resulted from the reaction of the aromatic compounds with BrCl, which was formed by the reaction of H2O2, chloride, and bromide under acidic conditions. An alternative matrix modifier salt is recommended that prevents the bromination reaction and avoids these deleterious effects on sample integrity during headspace analysis.
Asunto(s)
Bromuros/química , Agua Dulce/química , Peróxido de Hidrógeno/química , Tolueno/análisis , Aguas Residuales/química , Contaminantes Químicos del Agua/análisis , Xilenos/análisis , Calibración , Cromatografía de Gases y Espectrometría de Masas , Halogenación , Calor , Concentración de Iones de Hidrógeno , Oxidación-Reducción , Cloruro de Sodio/química , Tolueno/química , Contaminantes Químicos del Agua/química , Xilenos/químicaRESUMEN
Chemical oxidation regeneration of granular activated carbon (GAC) is a developing technology that can be carried out utilizing thermally-activated persulfate. During chemical regeneration of GAC, aggressive oxidative conditions lead to high acidity (pH<2) and the accumulation of sodium persulfate residuals in the GAC. In this study, we investigated the impact of chemical oxidation on the sorption characteristics of methyl-tert butyl ether (MTBE) in GAC. Loss of MTBE sorption was measured in thermally-activated persulfate regenerated GAC. The accumulation of sulfur was partially responsible for the blockage of sorption sites, but sorption loss was amplified under oxidizing and acidic conditions and attributed to the formation of acidic surface oxides and enhanced electrostatic attraction and accumulation of SO(4)(2-) in GAC. Raising the pH in the GAC slurry resulted in the removal of the residual sulfate and improved MTBE sorption indicating that the mechanisms responsible for MTBE sorption loss were reversible. These results establish baseline conditions and parameters that can be used to optimize pilot- and full-scale deployment of thermally-activated persulfate regeneration of GAC.
Asunto(s)
Carbón Orgánico/química , Éteres Metílicos/química , Sulfatos/química , Contaminantes Químicos del Agua/química , Adsorción , Éteres Metílicos/análisis , Oxidación-Reducción , Eliminación de Residuos Líquidos , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodosRESUMEN
Activated persulfate (Na(2)S(2)O(8)) regeneration of methyl tert-butyl ether (MTBE) and chloroform-spent GAC was evaluated in this study. Thermal-activation of persulfate was effective and resulted in greater MTBE removal than either alkaline-activation or H(2)O(2)-persulfate binary mixtures. H(2)O(2) may serve multiple roles in oxidation mechanisms including Fenton-driven oxidation, and indirect activation of persulfate through thermal or ferrous iron activation mechanisms. More frequent, lower volume applications of persulfate solution (i.e., the persulfate loading rate), higher solid/solution ratio (g GAC mL(-1) solution), and higher persulfate concentration (mass loading) resulted in greater MTBE oxidation and removal. Chloroform oxidation was more effective in URV GAC compared to F400 GAC. This study provides baseline conditions that can be used to optimize pilot-scale persulfate-driven regeneration of contaminant-spent GAC.
Asunto(s)
Carbono/química , Cloroformo/química , Éteres Metílicos/química , Oxígeno/química , Sulfatos/química , Adsorción , Técnicas de Química Analítica , Calor , Peróxido de Hidrógeno/química , Concentración de Iones de Hidrógeno , Hierro/química , Modelos Químicos , Temperatura , Purificación del Agua/métodosRESUMEN
In Fenton-driven oxidation treatment systems, reaction intermediates derived from parent compounds can play a significant role in the overall treatment process. Fenton-like reactions in the presence of toluene or benzene, involved a transformation mechanism that was highly efficient relative to the conventional Fenton-driven mechanism. A delay in hydrogen peroxide (H2O2) reaction occurred until the complete or near-complete transformation of toluene or benzene and involved the simultaneous reaction of dissolved oxygen. This highly efficient transformation mechanism is initiated by Fenton-like reactions, and therefore dependent on conventional Fenton-like parameters. Results indicated that several potential parameters and mechanisms did not play a significant role in the transformation mechanism including electron shuttles, Fe chelates, high valent oxo-iron complexes, anionic interferences in H2O2 reaction, and H2O2 formation. The Fenton-like initiation, formation, and propagation of a reaction intermediate species capable of transforming toluene, while simultaneously inhibiting H2O2 reaction is the most viable mechanism.
Asunto(s)
Tolueno/química , Peróxido de Hidrógeno/química , Hierro/química , CinéticaRESUMEN
Fenton-driven oxidation of methyl tert-butyl ether (MTBE) (0.11-0.16mM) in batch reactors containing ferric iron (5mM) and hydrogen peroxide (H(2)O(2)) (6mM) (pH=3) was performed to investigate MTBE transformation mechanisms. Independent variables included the forms of iron (Fe) (Fe(2)(SO(4))(3).9H(2)O and Fe(NO(3))(3).9H(2)O), H(2)O(2) (6, 60mM), chloroform (CF) (0.2-2.4mM), isopropyl alcohol (IPA) (25, 50mM), and sulfate (7.5mM). MTBE, tert-butyl alcohol and acetone transformation were significantly greater when oxidation was carried out with Fe(NO(3))(3).9H(2)O than with Fe(2)(SO(4))(3).9H(2)O. Sulfate interfered in the formation of the ferro-peroxy intermediate species, inhibited H(2)O(2) reaction, hydroxyl radical (()OH) formation, and MTBE transformation. Transformation was faster and more complete at a higher [H(2)O(2)] (60mM), but resulted in lower oxidation efficiency which was attributed to ()OH scavenging by H(2)O(2). CF scavenging of the superoxide radical (()O(2)(-)) in the ferric nitrate system resulted in lower rates of ()O(2)(-) reduction of Fe(III) to Fe(II), ()OH production, and consequently lower rates of MTBE transformation. IPA, an excellent scavenger of ()OH, completely inhibited MTBE transformation in the ferric nitrate system indicating oxidation was predominantly by ()OH. ()OH scavenging by HSO(4)(-), formation of the sulfate radical (()SO(4)(-)), and oxidation of MTBE by ()SO(4)(-) was estimated to be negligible. The form of Fe (i.e., counter anion) selected for use in Fenton treatment systems impacts oxidative mechanisms, treatment efficiency, and post-oxidation treatment of residuals which may require additional handling and cost.
Asunto(s)
Compuestos Férricos/química , Depuradores de Radicales Libres/química , Peróxido de Hidrógeno/metabolismo , Hierro/metabolismo , Éteres Metílicos/metabolismo , Nitratos/química , 2-Propanol/química , Peróxido de Hidrógeno/química , Radical Hidroxilo/química , Oxidación-ReducciónRESUMEN
In situ chemical oxidation using permanganate is an approach to organic contaminant site remediation. Manganese dioxide particles are products of permanganate reactions. These particles have the potential to deposit in the subsurface and impact the flow-regime in/around permanganate injection, including the well screen, filter pack, and the surrounding subsurface formation. Control of these particles can allow for improved oxidant injection and transport and contact between the oxidant and contaminants of concern. The goals of this research were to determine if MnO(2) can be stabilized/controlled in an aqueous phase, and to determine the dependence of particle stabilization on groundwater characteristics. Bench-scale experiments were conducted to study the ability of four stabilization aids (sodium hexametaphosphate (HMP), Dowfax 8390, xanthan gum, and gum arabic) in maintaining particles suspended in solution under varied reaction conditions and time. Variations included particle and stabilization aid concentrations, ionic content, and pH. HMP demonstrated the most promising results, as compared to xanthan gum, gum arabic, and Dowfax 8390 based on results of spectrophotometric studies of particle behavior, particle filtration, and optical measurements of particle size and zeta potential. HMP inhibited particle settling, provided for greater particle stability, and resulted in particles of a smaller average size over the range of experimental conditions evaluated compared to results for systems that did not include HMP. Additionally, HMP did not react unfavorably with permanganate. These results indicate that the inclusion of HMP in a permanganate oxidation system improves conditions that may facilitate particle transport.
Asunto(s)
Compuestos de Manganeso/química , Óxidos/química , Goma Arábiga/química , Concentración de Iones de Hidrógeno , Cinética , Oxidación-Reducción , Tamaño de la Partícula , Fosfatos/química , Polisacáridos Bacterianos/químicaRESUMEN
In situ chemical oxidation using permanganate is an increasingly employed approach to organic contaminant remediation at hazardous waste sites. Manganese dioxide (MnO2) particles form as a by-product of the reaction of permanganate with contaminants and naturally-reduced subsurface materials. These particles are of interest because they have the potential to deposit in the subsurface and impact the flow regime in/around permanganate injection, including the well screen, filter pack, and the surrounding subsurface formation. Control of these particles can allow for improved oxidant injection and transport, and contact between the oxidant and contaminants of concern. Sodium hexametaphosphate (HMP) has previously been identified as a promising aid to stabilize MnO2 in solution when included in the oxidizing solution, increasing the potential to inhibit particle deposition and impact subsurface flow. The goal of the experimental studies described herein was to investigate the ability of HMP to prevent particle deposition in transport studies using four different types of porous media. Permanganate was delivered to a contaminant source zone (trichloroethylene) located within four different media types with variations in sand, clay, organic carbon, and iron oxides (as goethite) content. Deposition of MnO2 within the columns was quantified with distance from the source zone. Experiments were repeated in replicate columns with the inclusion of HMP directly with the oxidant delivery solution, and MnO2 deposition was again quantified. While total MnO2 deposition within the 60 cm columns did not change significantly with the addition of HMP, deposition within the contaminant source zone decreased by 25-85%, depending on the specific media type. The greatest differences in deposition were observed in the goethite-containing and clay-containing columns. Columns containing these two media types experienced completely plugged flow in the oxidant-only delivery systems; however, the addition of HMP prevented this plugging within the columns, increasing the oxidant throughput.
Asunto(s)
Compuestos de Manganeso/química , Óxidos/química , Restauración y Remediación Ambiental , Concentración de Iones de Hidrógeno , Oxidación-ReducciónRESUMEN
Experimental studies were designed to identify the active agents in Fe(II)-based degradative solidification/stabilization (Fe(II)-DS/S) that are responsible for the degradation of tetrachloroethylene (PCE) as well as the conditions that enhance the formation of these active agents. First, the conditions that lead to maximizing production of the active agents were identified by measuring the ability of various chemical mixtures to degrade PCE. Results showed that Fe(II), Fe(III), and Cl were the elements most closely associated with high degradation rates. In addition to elemental composition, unknown factors associated with the formation of solid phases could also be important in determining the extent of formation of active reducing agents. Second, instrumental analysis techniques (XRD, SEM, SEM-EDS) were used to identify compounds in chemical mixtures that were observed to have high activities for PCE degradation. SEM-EDS analysis indicated that Fe was associated with hexagonal particles, which is the typical shape of several AFm phases in hydrated Portland cement that are composed of calcium, aluminum/iron, hydroxide, and possibly other anions. No Fe-containing solid phases could be identified. Therefore, it appears that AFm phases are the most likely active agents for PCE degradation in mixtures containing Portland cement or its acid extract. Mixtures without cement did not form the same solid phases but were observed to form ferrous hydroxide as a major solid phase.