Challenges for chemistry in Ukraine after the war: Ukrainian science requires rebuilding and support.

The unprovoked Russian invasion has created considerable challenges for Ukrainian science. In this article, we discuss actions needed to support and rebuild Ukrainian science and educational systems. The proposed actions take into account past Ukrainian scientific achievements including developments in organic chemistry.

Spiropyran-Based Photoisomerizable α-Amino Acid for Membrane-Active Peptide Modification.

Photoisomerizable peptides are promising drug candidates in photopharmacology. While azobenzene- and diarylethene-containing photoisomerizable peptides have already demonstrated their potential in this regard, reports on the use of spiropyrans to photoregulate bioactive peptides are still scarce. This work focuses on the design and synthesis of a spiropyran-derived amino acid, (S)-2-amino-3-(6'-methoxy-1',3',3'-trimethylspiro-[2H-1-benzopyran-2,2'-indolin-6-yl])propanoic acid, which is suitable for the preparation of photoisomerizable peptides. The utility of this amino acid is demonstrated by incorporating it into the backbone of BP100, a known membrane-active peptide, and by examining the photoregulation of the membrane perturbation by the spiropyran-containing peptides. The toxicity of the peptides (against the plant cell line BY-2), their bacteriotoxicity (E. coli), and actin-auxin oscillator modulation ability were shown to be significantly dependent on the photoisomeric state of the spiropyran unit.

Insights into Modeling Approaches in Chemistry: Assessing Ligand-Protein Binding Thermodynamics Based on Rigid-Flexible Model Molecules.

In the field of chemistry, model compounds find extensive use for investigating complex objects. One prime example of such object is the protein-ligand supramolecular interaction. Prediction the enthalpic and entropic contribution to the free energy associated with this process, as well as the structural and dynamic characteristics of protein-ligand complexes poses considerable challenges. This review exemplifies modeling approaches used to study protein-ligand binding (PLB) thermodynamics by employing pairs of conformationally constrained/flexible model molecules. Strategically designing the model molecules can reduce the number of variables that influence thermodynamic parameters. This enables scientists to gain deeper insights into the enthalpy and entropy of PLB, which is relevant for medicinal chemistry and drug design. The model studies reviewed here demonstrate that rigidifying ligands may induce compensating changes in the enthalpy and entropy of binding. Some "rules of thumb" have started to emerge on how to minimize entropy-enthalpy compensation and design efficient rigidified or flexible ligands.

Highly Fluorinated Peptide Probes with Enhanced In Vivo Stability for 19 F-MRI.

A labeling strategy for in vivo 19 F-MRI (magnetic resonance imaging) based on highly fluorinated, short hydrophilic peptide probes, is developed. As dual-purpose probes, they are functionalized further by a fluorophore and an alkyne moiety for bioconjugation. High fluorination is achieved by three perfluoro-tert-butyl groups, introduced into asparagine analogues by chemically stable amide bond linkages. d-amino acids and ß-alanine in the sequences endow the peptide probes with low cytotoxicity and high serum stability. This design also yielded unstructured peptides, rendering all 27 19 F substitutions chemically equivalent, giving rise to a single 19 F-NMR resonance with <10 Hz linewidth. The resulting performance in 19 F-MRI is demonstrated for six different peptide probes. Using fluorescence microscopy, these probes are found to exhibit high stability and long circulation times in living zebrafish embryos. Furthermore, the probes can be conjugated to bovine serum albumin with only amoderate increase in 19 F-NMR linewidth to ≈30 Hz. Overall, these peptide probes are hence suitable for in vivo 19 F-MRI applications.

Reductive Recyclization of sp3-Enriched Functionalized Isoxazolines into α-Hydroxy Lactams.

An efficient synthesis (up to a 200 g scale) of 3-hydroxypyrrolidin-2-ones bearing alkyl substituents or functional groups at the C-5 position is described. The reaction sequence started from 1,3-dipolar cycloaddition of in situ generated nitrile oxides with (meth-)acrylates into 3-substituted isoxazoline-5-carboxylates. The catalytic hydrogenolysis of the isoxazoline N-O bond was optimal upon using H2 (1 atm) at rt, with the following order of the catalyst activity: Pd-C > Pd(OH)2-C > Pt-C. The reactions with Pt-C were more selective for the synthesis of pyrrolidones, while Pd-C provided the fastest conversion rates. The stirring efficiency had a positive impact on conversion rather than elevated temperatures (up to 40 °C) or pressure (up to 50 atm). The diastereoselectivity was governed mainly by steric factors, with a dr of 1:1 to 3:1 (cis- and trans-isomers could be separated). Higher homologues (isoxazolinylacetates and -propanoates) were suitable for the synthesis of 6- or 7-substituted 4-hydroxypiperidones and 5-hydroxyazepanones, respectively. The proposed methods are tolerant to functional groups, including CF3 (but not CHF2 or CH2Cl), ester, and most N-Boc-protected amines. The utility of hydroxyl groups in lactams was shown by functional group transformations. Hydrogenolysis of C(5)-functionalized isoxazolines, bearing trimethylsilyl, phosphonate, or sulfone groups, was also studied to demonstrate limitations.

A stereochemical journey around spirocyclic glutamic acid analogs.

A practical divergent synthetic approach is reported for the library of regio- and stereoisomers of glutamic acid analogs built on the spiro[3.3]heptane scaffold. Formation of the spirocyclic scaffold was achieved starting from a common precursor - an O-silylated 2-(hydroxymethyl)cyclobutanone derivative. Its olefination required using the titanium-based Tebbe protocol since the standard Wittig reaction did not work with this particular substrate. The construction of the second cyclobutane ring of the spirocyclic system was achieved through either subsequent dichloroketene addition or Meinwald oxirane rearrangement as the key synthetic steps, depending on the substitution patterns in the target compounds (1,6- or 1,5-, respectively). Further modified Strecker reaction of the resulting racemic spirocyclic ketones with the Ellman's sulfinamide as a chiral auxiliary had low to moderate diastereoselectivity; nevertheless, all stereoisomers were isolated in pure form via chromatographic separation, and their absolute configuration was confirmed by X-ray crystallography. Members of the library were tested for the inhibitory activity against H. pylori glutamate racemase.

Diarylethene-Based Photoswitchable Inhibitors of Serine Proteases.

A bicyclic peptide scaffold was chemically adapted to generate diarylethene-based photoswitchable inhibitors of serine protease Bos taurus trypsin 1 (T1). Starting from a prototype molecule-sunflower trypsin inhibitor-1 (SFTI-1)-we obtained light-controllable inhibitors of T1 with Ki in the low nanomolar range, whose activity could be modulated over 20-fold by irradiation. The inhibitory potency as well as resistance to proteolytic degradation were systematically studied on a series of 17 SFTI-1 analogues. The hydrogen bond network that stabilizes the structure of inhibitors and possibly the enzyme-inhibitor binding dynamics were affected by isomerization of the photoswitch. The feasibility of manipulating enzyme activity in time and space was demonstrated by controlled digestion of gelatin-based hydrogel and an antimicrobial peptide BP100-RW. Finally, our design principles of diarylethene photoswitches are shown to apply also for the development of other serine protease inhibitors.

Photochemical [2 + 2] Cycloaddition of Alkenyl Boronic Derivatives: An Entry into 3-Azabicyclo[3.2.0]heptane Scaffold.

The synthesis of 3-azabicyclo[3.2.0]heptyl boropinacolates and trifluoroborates via the [2 + 2] photocycloaddition of the corresponding alkenyl boronic derivatives and maleimides or maleic anhydride is described. Optimization of the reaction conditions (i.e., wavelength, concentration of the reagents, photosensitizer) was carried out, and the scope and limitations of the method were studied. Alkenyl boronic acid pinacolates were found to be more suitable for the [2 + 2] cycloaddition, providing better reaction outcomes compared to the trifluoroborates. The utility of this approach was shown by the preparation of bi- and trifunctional building blocks (21 examples), which could be easily synthesized on up to 60 g scale. These cycloadducts provide a convenient entry into the 3-azabicyclo[3.2.0]heptane scaffold through the C-C coupling or oxidative deborylation reactions.

Diarylethene moiety as an enthalpy-entropy switch: photoisomerizable stapled peptides for modulating p53/MDM2 interaction.

Analogs of the known inhibitor (peptide pDI) of the p53/MDM2 protein-protein interaction are reported, which are stapled by linkers bearing a photoisomerizable diarylethene moiety. The corresponding photoisomers possess significantly different affinities to the p53-interacting domain of the human MDM2. Apparent dissociation constants are in the picomolar-to-low nanomolar range for those isomers with diarylethene in the "open" configuration, but up to eight times larger for the corresponding "closed" isomers. Spectroscopic, structural, and computational studies showed that the stapling linkers of the peptides contribute to their binding. Calorimetry revealed that the binding of the "closed" isomers is mostly enthalpy-driven, whereas the "open" photoforms bind to the protein stronger due to their increased binding entropy. The results suggest that conformational dynamics of the protein-peptide complexes may explain the differences in the thermodynamic profiles of the binding.

Light-controllable dithienylethene-modified cyclic peptides: photoswitching the in vivo toxicity in zebrafish embryos.

This study evaluates the embryotoxicity of dithienylethene-modified peptides upon photoswitching, using 19 analogues based on the ß-hairpin scaffold of the natural membranolytic peptide gramicidin S. We established an in vivo assay in two variations (with ex vivo and in situ photoisomerization), using larvae of the model organism Danio rerio, and determined the toxicities of the peptides in terms of 50% lethal doses (LD50). This study allowed us to: (i) demonstrate the feasibility of evaluating peptide toxicity with D. rerio larvae at 3-4 days post fertilization, (ii) determine the phototherapeutic safety windows for all peptides, (iii) demonstrate photoswitching of the whole-body toxicity for the dithienylethene-modified peptides in vivo, (iv) re-analyze previous structure-toxicity relationship data, and (v) select promising candidates for potential clinical development.

Efficiently Photocontrollable or Not? Biological Activity of Photoisomerizable Diarylethenes.

Diarylethene derivatives, the biological activity of which can be reversibly changed by irradiation with light of different wavelengths, have shown promise as scientific tools and as candidates for photocontrollable drugs. However, examples demonstrating efficient photocontrol of their biological activity are still relatively rare. This concept article discusses the possible reasons for this situation and presents a critical analysis of existing data and hypotheses in this field, in order to extract the design principles enabling the construction of efficient photocontrollable diarylethene-based molecules. Papers addressing biologically relevant interactions between diarylethenes and biomolecules are analyzed; however, in most published cases, the efficiency of photocontrol in living systems remains to be demonstrated. We hope that this article will encourage further discussion of design principles, primarily among pharmacologists, synthetic and medicinal chemists.

Highly reactive bis-cyclooctyne-modified diarylethene for SPAAC-mediated cross-linking.

Photoisomerizable diarylethenes equipped with triple bonds are promising building blocks for constructing bistable photocontrollable systems. Here we report on the design, synthesis and application of a cross-linking reagent which is based on a diarylethene core and features two strained cyclooctynes. High reactivity of the cyclooctyne rings in catalyst-free 1,3-dipolar cycloaddition reactions was suggested to stem from the additional strain imposed by the fused thiophene rings. This hypothesis was confirmed by quantum chemical calculations.

Orientation and Location of the Cyclotide Kalata B1 in Lipid Bilayers Revealed by Solid-State NMR.

Cyclotides are ultra-stable cyclic disulfide-rich peptides from plants. Their biophysical effects and medically interesting activities are related to their membrane-binding properties, with particularly high affinity for phosphatidylethanolamine lipids. In this study we were interested in understanding the molecular details of cyclotide-membrane interactions, specifically with regard to the spatial orientation of the cyclotide kalata B1 from Oldenlandia affinis when embedded in a lipid bilayer. Our experimental approach was based on the use of solid-state 19F-NMR of oriented bilayers in conjunction with the conformationally restricted amino acid L-3-(trifluoromethyl)bicyclopent-[1.1.1]-1-ylglycine as an orientation-sensitive 19F-NMR probe. Its rigid connection to the kalata B1 backbone scaffold, together with the well-defined structure of the cyclotide, allowed us to calculate the protein alignment in the membrane directly from the orientation-sensitive 19F-NMR signal. The hydrophobic and polar residues on the surface of kalata B1 form well-separated patches, endowing this cyclotide with a pronounced amphipathicity. The peptide orientation, as determined by NMR, showed that this amphipathic structure matches the polar/apolar interface of the lipid bilayer very well. A location in the amphiphilic headgroup region of the bilayer was supported by 15N-NMR of uniformly labeled protein, and confirmed using solid-state 31P- and 2H-NMR. 31P-NMR relaxation data indicated a change in lipid headgroup dynamics induced by kalata B1. Changes in the 2H-NMR order parameter profile of the acyl chains suggest membrane thinning, as typically observed for amphiphilic peptides embedded near the polar/apolar bilayer interface. Furthermore, from the 19F-NMR analysis two important charged residues, E7 and R28, were found to be positioned equatorially. The observed location thus would be favorable for the postulated binding of E7 to phosphatidylethanolamine lipid headgroups. Furthermore, it may be speculated that this pair of side chains could promote oligomerization of kalata B1 through electrostatic intermolecular contacts via their complementary charges.

Flexibility vs rigidity of amphipathic peptide conjugates when interacting with lipid bilayers.

For the first time, the photoisomerization of a diarylethene moiety (DAET) in peptide conjugates was used to probe the effects of molecular rigidity/flexibility on the structure and behavior of model peptides bound to lipid membranes. The DAET unit was incorporated into the backbones of linear peptide-based constructs, connecting two amphipathic sequences (derived from the ß-stranded peptide (KIGAKI)3 and/or the α-helical peptide BP100). A ß-strand-DAET-α-helix and an α-helix-DAET-α-helix models were synthesized and studied in phospholipid membranes. Light-induced photoisomerization of the linker allowed the generation of two forms of each conjugate, which differed in the conformational mobility of the junction between the α-helical and/or the ß-stranded part of these peptidomimetic molecules. A detailed study of their structural, orientational and conformational behavior, both in isotropic solution and in phospholipid model membranes, was carried out using circular dichroism and solid-state 19F-NMR spectroscopy. The study showed that the rigid and flexible forms of the two conjugates had appreciably different structures only when embedded in an anisotropic lipid environment and only in the gel phase. The influence of the rigidity/flexibility of the studied conjugates on the lipid thermotropic phase transition was also investigated by differential scanning calorimetry. Both models were found to destabilize the lamellar gel phases.

Diphytanoyl lipids as model systems for studying membrane-active peptides.

The branched chains in diphytanoyl lipids provide membranes with unique properties, such as high chemical/physical stability, low water permeability, and no gel-to-fluid phase transition at ambient temperature. Synthetic diphytanoyl phospholipids are often used as model membranes for electrophysiological experiments. To evaluate whether these sturdy lipids are also suitable for solid-state NMR, we have examined their interactions with a typical amphiphilic peptide in comparison with straight-chain lipids. First, their phase properties were monitored using 31P NMR, and the structural behaviour of the antimicrobial peptide PGLa was studied by 19F NMR and circular dichroism in oriented membrane samples. Only lipids with choline headgroups (DPhPC) were found to form stable lipid bilayers in oriented samples, while DPhPG, DPhPE and DPhPS display non-lamellar structures. Hence, the experimental temperature and hydration are crucial factors when using supported diphytanoyl lipids, as both parameters must be maintained in an appropriate range to avoid the formation of non-bilayer structures. For the same reason, a high content of other diphytanoyl lipids besides DPhPC in mixed lipid systems is not favourable. Unlike the situation in straight-chain membranes, we found that the α-helical PGLa was not able to insert into the tightly packed fluid bilayer of DPhPC but remained in a surface-bound state even at very high peptide concentration. This behaviour can be explained by the high cohesivity and the negative spontaneous curvature of the diphytanoyl lipids. These characteristic features must therefore be taken into consideration, both, in electrophysiological studies, and when interpreting the structural behaviour of membrane-active peptides in such lipid environment.

Delivering Structural Information on the Polar Face of Membrane-Active Peptides: 19 F-NMR Labels with a Cationic Side Chain.

Conformationally constrained non-racemizing trifluoromethyl-substituted lysine isosteres [(E)- and (Z)-TCBLys] with charged side chains are presented as a new type of 19 F-NMR labels for peptide studies. Design of the labels, their synthesis, incorporation into peptides and experimental demonstration of their application for solid state NMR studies of membrane-active peptides are described. A series of fluorine-labeled analogues of the helical amphipathic antimicrobial peptide PGLa(Nle) was obtained, in which different lysine residues in the original peptide sequence were replaced, one at a time, by either (E)- or (Z)-TCBLys. Antimicrobial activities of the synthesized analogues were practically the same as those of the parent peptide. The structural and orientational parameters of the helical PGLa(Nle) peptide in model bilayers, as determined using the novel labels confirmed and refined the previously known structure. (E)- and (Z)-TCBLys, as a set of cationic 19 F-NMR labels, were shown to deliver structural information about the charged face of amphipathic peptides by solid state 19 F-NMR, previously inaccessible by this method.

Direct Photocontrol of Peptidomimetics: An Alternative to Oxygen-Dependent Photodynamic Cancer Therapy.

Conventional photodynamic treatment strategies are based on the principle of activating molecular oxygen in situ by light, mediated by a photosensitizer, which leads to the generation of reactive oxygen species and thereby causes cell death. A diarylethene-derived peptidomimetic is presented that is suitable for photodynamic cancer therapy without any involvement of oxygen. This light-sensitive molecule is not a mediator but is itself the cytotoxic agent. As a derivative of the cyclic amphiphilic peptide gramicidin S, the peptidomimetic exists in two thermally stable photoforms that are interconvertible by light of different wavelengths. The isomer generated by visible light shows much stronger toxicity against tumor cells than the UV-generated isomer. First in vivo applications are demonstrated on a tumor animal model to illustrate how the peptidomimetic can be administered in the less toxic form and then activated locally in a solid tumor by visible light.

Design, Synthesis, and Application of an Optimized Monofluorinated Aliphatic Label for Peptide Studies by Solid-State 19 F†NMR Spectroscopy.

A conformationally restricted monofluorinated α-amino acid, (3-fluorobicyclo[1.1.1]pentyl)glycine (F-Bpg), was designed as a label for the structural analysis of membrane-bound peptides by solid-state 19 F NMR spectroscopy. The compound was synthesized and validated as a 19 F label for replacing natural aliphatic α-amino acids. Calculations suggested that F-Bpg is similar to Leu/Ile in terms of size and lipophilicity. The 19 F NMR label was incorporated into the membrane-active antimicrobial peptide PGLa and provided information on the structure of the peptide in a lipid bilayer.

The most reactive amide as a transition-state mimic for cis-trans interconversion.

1-Azatricyclo[3.3.1.1(3,7)]decan-2-one (3), the parent compound of a rare class of 90°-twisted amides, has finally been synthesized, using an unprecedented transformation. These compounds are of special interest as transition-state mimics for the enzyme-catalyzed cis-trans rotamer interconversion of amides involved in peptide and protein folding and function. The stabilization of the amide group in its high energy, perpendicular conformation common to both systems is shown for the rigid tricyclic system to depend, as predicted by calculation, on its methyl group substitution pattern, making 3 by some way the most reactive known "amide".

Synthesis and structural analysis of angular monoprotected diamines based on spiro[3.3]heptane scaffold.

The synthesis of all stereoisomers of spiro[3.3]heptane-1,6-diamines suitably protected for use as building blocks in drug discovery is reported. Structural analysis revealed the similarity between the spiro[3.3]heptane and cyclohexane scaffolds. Comparison of the distance between functional groups and their spatial orientation proved that (1S,4r,6R)- and (1R,4r,6S)-1,6-disubstituted spiro[3.3]heptanes can be considered as restricted surrogates of cis-1,4-disubstituted cyclohexane derivatives. Similarly, (1S,4s,6R)- and (1R,4s,6S)-1,6-disubstituted spiro[3.3]heptanes are the restricted surrogates of trans-1,3-disubstituted cyclohexanes. Such replacement can be recommended for use in optimization of ADME parameters of lead compounds in drug discovery.