Metalation of metal-organic frameworks: fundamentals and applications.

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

Trace removal of benzene vapour using double-walled metal-dipyrazolate frameworks.

In principle, porous physisorbents are attractive candidates for the removal of volatile organic compounds such as benzene by virtue of their low energy for the capture and release of this pollutant. Unfortunately, many physisorbents exhibit weak sorbate-sorbent interactions, resulting in poor selectivity and low uptake when volatile organic compounds are present at trace concentrations. Herein, we report that a family of double-walled metal-dipyrazolate frameworks, BUT-53 to BUT-58, exhibit benzene uptakes at 298 K of 2.47-3.28 mmol g-1 at <10 Pa. Breakthrough experiments revealed that BUT-55, a supramolecular isomer of the metal-organic framework Co(BDP) (H2BDP = 1,4-di(1H-pyrazol-4-yl)benzene), captures trace levels of benzene, producing an air stream with benzene content below acceptable limits. Furthermore, BUT-55 can be regenerated with mild heating. Insight into the performance of BUT-55 comes from the crystal structure of the benzene-loaded phase (C6H6@BUT-55) and density functional theory calculations, which reveal that C-H···X interactions drive the tight binding of benzene. Our results demonstrate that BUT-55 is a recyclable physisorbent that exhibits high affinity and adsorption capacity towards benzene, making it a candidate for environmental remediation of benzene-contaminated gas mixtures.

Chemically Stable Metal-Organic Frameworks: Rational Construction and Application Expansion.

Metal-organic frameworks (MOFs) have been attracting tremendous attention owing to their great structural diversity and functional tunability. Despite numerous inherent merits and big progress in the fundamental research (synthesizing new compounds, discovering new structures, testing associated properties, etc.), poor chemical stability of most MOFs severely hinders their involvement in practical applications, which is the final goal for developing new materials. Therefore, constructing new stable MOFs or stabilizing extant labile MOFs is quite important. As with them, some "potential" applications would come true and a lot of new applications under harsh conditions can be explored. Efficient strategies are being pursued to solve the stability problem of MOFs and thereby achieve and expand their applications.In this Account, we summarize the research advance in the design and synthesis of chemically stable MOFs, particularly those stable in acidic, basic, and aqueous systems, as well as in the exploration of their applications in several expanding fields of environment, energy, and food safety, which have been dedicated in our lab over the past decade. The strategies for accessing stable MOFs can be classified into: (a) assembling high-valent metals (hard acid, such as Zr4+, Al3+) with carboxylate ligands (hard base) for acid-stable MOFs; (b) combining low-valent metals (soft acid, such as Co2+, Ni2+) and azolate ligands (soft base, such as pyrazolate) for alkali-resistant MOFs; (c) enhancing the connectivity of the building unit; (d) contracting or rigidifying the ligand; (e) increasing the hydrophobicity of the framework; and (f) substituting liable building units with stable ones (such as metal metathesis) to obtain robust MOFs. In addition, other factors, including the geometry and symmetry of building units, framework-framework interaction, and so forth, have also been taken into account in the design and synthesis of stable MOFs. On the basis of these approaches, the stability of resulting MOFs under corresponding conditions has been remarkably enhanced.With high chemical stability achieved, the MOFs have found many new and significant applications, aiming at addressing global challenges related to environmental pollution, energy shortage, and food safety.A series of stable MOFs have been constructed for detecting and eliminating contaminations. Various fluorescent MOFs were rationally customized to be powerful platforms for sensing hazardous targets in food and water, such as dioxins, antibiotics, veterinary drugs, and heavy metal ions. Some hydrophobic MOFs even showed effective and specific capture of low-concentration volatile organic compounds.Novel MOFs with record-breaking acid/base/nucleophilic regent resistance have expanded their application scope under harsh conditions. BUT-8(Cr)A, as the most acid-stable MOF yet, showed reserved structural integrity in concentrated H2SO4 and recorded high proton conductivity; the most alkali-resistant MOF, PCN-601, retained crystallinity even in boiling saturated NaOH aqueous solution, and such base-stable MOFs composed of non-noble metal clusters and poly pyrazolate ligands also demonstrated great potential in heterogeneous catalysis in alkaline/nucleophilic systems for the first time.It is believed that this Account will provide valuable references on stable MOFs' construction as well as application expansion toward harsh conditions, thereby being helpful to promote MOF materials to step from fundamental research to practical applications.

A Practice of Reticular Chemistry: Construction of a Robust Mesoporous Palladium Metal-Organic Framework via Metal Metathesis.

Constructing stable palladium(II)-based metal-organic frameworks (MOFs) would unlock more opportunities for MOF chemistry, particularly toward applications in catalysis. However, their availability is limited by synthetic challenges due to the inertness of the Pd-ligand coordination bond, as well as the strong tendency of the Pd(II) source to be reduced under typical solvothermal conditions. Under the guidance of reticular chemistry, herein, we present the first example of an azolate Pd-MOF, BUT-33(Pd), obtained via a deuterated solvent-assisted metal metathesis. BUT-33(Pd) retains the underlying sodalite network and mesoporosity of the template BUT-33(Ni) and shows excellent chemical stability (resistance to an 8 M NaOH aqueous solution). With rich Pd(II) sites in the atomically precise distribution, it also demonstrates good performances as a heterogeneous Pd(II) catalyst in a wide application scope, including Suzuki/Heck coupling reactions and photocatalytic CO2 reduction to CH4. This work highlights a feasible approach to reticularly construct noble metal based MOFs via metal metathesis, in which various merits, including high chemical stability, large pores, and tunable functions, have been integrated for addressing challenging tasks.

In Situ Porphyrin Substitution in a Zr(IV)-MOF for Stability Enhancement and Photocatalytic CO2 Reduction.

Despite numerous inherent merits of metal-organic frameworks (MOFs), structural fragility has imposed great restrictions on their wider involvement in many applications, such as in catalysis. Herein, a strategy for enhancing stability and enabling functionality in a labile Zr(IV)-MOF has been proposed by in situ porphyrin substitution. A size- and geometry-matched robust linear porphyrin ligand 4,4'-(porphyrin-5,15-diyl)dibenzolate (DCPP2- ) is selected to replace the 4,4'-(1,3,6,8-tetraoxobenzo[lmn][3,8]phenanthroline-2,7(1H,3H,6H,8H)-diyl)dibenzoate (NDIDB2- ) ligand in the synthesis of BUT-109(Zr), affording BUT-110 with varied porphyrin contents. Compared to BUT-109(Zr), the chemical stability of BUT-110 series is greatly improved. Metalloporphyrin incorporation endows BUT-110 MOFs with high catalytic activity in the photoreduction of CO2 , in the absence of photosensitizers. By tuning the metal species and porphyrin contents in BUT-110, the resulting BUT-110-50%-Co is demonstrated to be a good photocatalyst for selective CO2 -to-CO reduction, via balancing the chemical stability, photocatalytic efficiency, and synthetic cost. This work highlights the advantages of in situ ligand substitution for MOF modification, by which uniform distribution and high content of the incoming ligand are accessible in the resulting MOFs. More importantly, it provides a promising approach to convert unstable MOFs, which mainly constitute the vast MOF database but have always been neglected, into robust functional materials.

Kinetically Controlled Reticular Assembly of a Chemically Stable Mesoporous Ni(II)-Pyrazolate Metal-Organic Framework.

The application scope of metal-organic frameworks (MOFs) is severely restricted by their weak chemical stability and limited pore size. A robust MOF with large mesopores is highly desired, yet poses a great synthetic challenge. Herein, two chemically stable Ni(II)-pyrazolate MOFs, BUT-32 and -33, were constructed from a conformation-matched elongated pyrazolate ligand through the isoreticular expansion. The two MOFs share the same sodalite-type net, but have different pore sizes due to the network interpenetration in BUT-32. Controlled syntheses of the two MOFs have been achieved through precisely tuning reaction conditions, where the microporous BUT-32 was demonstrated to be a thermodynamically stable product while the mesoporous BUT-33 is kinetically favored. To date, BUT-32 represents the first example of Ni4-pyrazolate MOF whose structure was unambiguously determined by single-crystal X-ray diffraction. Interestingly, the kinetic product BUT-33 integrates 2.6 nm large mesopores with accessible Ni(II) active sites and remarkable chemical stability even in 4 M NaOH aqueous solution and 1 M Grignard reagent. This MOF thus demonstrated an excellent catalytic performance in carbon-carbon coupling reactions, superior to other Ni(II)-MOFs including BUT-32. These findings highlight the importance of kinetic control in the reticular synthesis of mesoporous MOFs, as well as their superiority in heterogeneous catalysis.

A Stable Zr(IV)-Based Metal-Organic Framework Constructed from C═C Bridged Di-isophthalate Ligand for Sensitive Detection of Cr2O72- in Water.

As the Cr2O72- anion is highly toxic, new sensors have been developing for its effective detection from water, among which metal-organic frameworks (MOFs) show distinct superiority over many other materials. Herein, a new fluorescent Zr(IV)-based MOF, [Zr6O4(OH)8(H2O)4(sbtc)2] (referred to as BUT-28), based on the di-isophthalate ligand with a central CH═CH moiety, trans-stilbene-3,3',5,5'-tetracarboxylate (sbtc4-), has been prepared and structurally determined. The MOF shows excellent stability in neutral, highly acidic, and weakly basic aqueous solutions. Moreover, no essential uptake loss in three cycles of water vapor adsorption-desorption measurements was observed for BUT-28, suggesting the robustness of the porous framework and its great potential for long-term use. Fluorescent measurements were carried out for BUT-28 and an isostructural MOF, Zr-abtc, which is constructed from the di-isophthalate ligand with a central N═N moiety, azobenzene-3,3',5,5'-tetracarboxylate (abtc4-). Interestingly, Zr-abtc shows very weak fluorescent emission. In contrast, BUT-28 exhibits relatively strong fluorescence and serves as a promising sensory material for the detection of trace Cr2O72- (limit of detection: 36 ppb) in aqueous solutions by selective and sensitive fluorescence quenching effect.

Functionalized Base-Stable Metal-Organic Frameworks for Selective CO2 Adsorption and Proton Conduction.

Metal-organic frameworks (MOFs) have shown great potential for application in various fields, including CO2 capture and proton conduction. For promoting their practical applications, both optimization of a given property and enhancement of chemical stability are crucial. In this work, three base-stable isostructural MOFs, [Ni8 (OH)4 (H2 O)2 (BDP-X)6 ] (Ni-BDP-X; H2 BDP=1,4-bis(4-pyrazolyl)benzene, X=CHO, CN, COOH) with different functional groups, are designed, synthesized, and used in CO2 capture and proton conduction experiments. They possess face-centered cubic topological structures with functional nanoscale cavities. Importantly, these MOFs are fairly stable to maintain their structures in boiling water and 4 M sodium hydroxide solution at room temperature. Functionalization endows them with tunable properties. In gas adsorption studies, these MOFs exhibit selective adsorption of CO2 over CH4 and N2 , and in particular the introduction of COOH groups provides the highest selectivity. In addition, the COOH-functionalized Ni-BDP exhibits a high proton conductivity of 2.22×10-3  S cm-1 at 80 °C and approximately 97 % relative humidity.

Yb(OTf)3-Mediated Access to Furans from ß-Ketothioamides via Eschenmoser Sulfide Contraction Reaction.

A mild and straightforward synthetic protocol for construction of a furan skeleton promoted by Yb(OTf)3 from ß-ketothioamides and arylglyoxals has been developed at room temperature. Importantly, this protocol involves a tandem sequence that includes aldol condensation, N-cyclization, ring opening, O-cyclization, S-cyclization, and Eschenmoser sulfide contraction.

Modulation of Water Vapor Sorption by Pore Engineering in Isostructural Square Lattice Topology Coordination Networks.

We report a crystal-engineering study conducted upon a platform of three mixed-linker square lattice (sql) coordination networks of general formula [Zn(Ria)(bphy)] [bphy = 1,2-bis(pyridin-4-yl)hydrazine, H2Ria = 5-position-substituted isophthalic acid, and R = -Br, -NO2, and -OH; compounds 1-3]. Analysis of single-crystal X-ray diffraction data of 1-2 and the simulated crystal structure of 3 revealed that 1-3 are isomorphous and sustained by bilayers of sql networks linked by hydrogen bonds. Although similar pore shapes and sizes exist in 1-3, distinct isotherm shapes (linear and S shape) and uptakes (2.4, 11.6, and 13.3 wt %, respectively) were observed. Ab initio calculations indicated that the distinct water sorption properties can be attributed to the R groups, which offer a range of hydrophilicity. Calculations indicated that the significantly lower experimental uptake in compound 1 can be attributed to a constricted channel. The calculated water-binding sites provide insights into how adsorbed water molecules bond to the pore walls, with the strongest interactions, water-hydroxyl hydrogen bonding, observed for 3. Overall, this study reveals how pore engineering can result in large variations in water sorption properties in an isomorphous family of rigid porous coordination networks.

The Effect of Pendent Groups upon Flexibility in Coordination Networks with Square Lattice Topology.

Gas or vapor-induced phase transformations in flexible coordination networks (CNs) offer the potential to exceed the performance of their rigid counterparts for separation and storage applications. However, whereas ligand modification has been used to alter the properties of such stimulus-responsive materials, they remain understudied compared with their rigid counterparts. Here, we report that a family of Zn2+ CNs with square lattice (sql) topology, differing only through the substituents attached to a linker, exhibit variable flexibility. Structural and CO2 sorption studies on the sql networks, [Zn(5-Ria)(bphy)]n, ia = isophthalic acid, bphy = 1,2-bis(pyridin-4-yl)hydrazine, R = -CH3, -OCH3, -C(CH3)3, -N=N-Ph, and -N=N-Ph(CH3)2, 2-6, respectively, revealed that the substituent moieties influenced both structural and gas sorption properties. Whereas 2-3 exhibited rigidity, 4, 5, and 6 exhibited reversible transformation from small pore to large pore phases. Overall, the insight into the profound effect of pendent moieties of linkers upon phase transformations in this family of layered CNs should be transferable to other CN classes.

Structural Phase Transformations Induced by Guest Molecules in a Nickel-Based 2D Square Lattice Coordination Network.

Herein, we report the crystal structure and guest binding properties of a new two-dimensional (2D) square lattice (sql) topology coordination network, sql-(azpy)(pdia)-Ni, which is comprised of two linker ligands with diazene (azo) moieties, (E)-1,2-di(pyridin-4-yl)diazene(azpy) and (E)-5-(phenyldiazenyl)isophthallate(pdia). sql-(azpy)(pdia)-Ni underwent guest-induced switching between a closed (nonporous) ß phase and several open (porous) α phases, but unlike the clay-like layer expansion to distinct phases previously reported in switching sql networks, a continuum of phases was formed. In effect, sql-(azpy)(pdia)-Ni exhibited elastic-like properties induced by adaptive guest binding. Single-crystal X-ray diffraction (SCXRD) studies of the α phases revealed that the structural transformations were enabled by the pendant phenyldiazenyl moiety on the pdia2- ligand. This moiety functioned as a type of hinge to enable parallel slippage of layers and interlayer expansion for the following guests: N,N-dimethylformamide, water, dichloromethane, para-xylene, and ethylbenzene. The slippage angle (interplanar distances) ranged from 54.133° (4.442 Å) in the ß phase to 69.497° (5.492 Å) in the ethylbenzene-included phase. Insight into the accompanying phase transformations was also gained from variable temperature powder XRD studies. Dynamic water vapor sorption studies revealed a stepped isotherm with little hysteresis that was reversible for at least 100 cycles. The isotherm step occurred at ca. 50% relative humidity (RH), the optimal RH value for humidity control.

Pore Environment Optimization of Microporous Metal-Organic Frameworks with Huddled Pyrazine Pillars for C2H2/CO2 Separation.

Metal-organic frameworks (MOFs) have been proven promising in addressing many critical issues related to gas separation and purification. However, it remains a great challenge to optimize the pore environment of MOFs for purification of specific gas mixtures. Herein, we report the rational construction of three isostructural microporous MOFs with the 4,4',4"-tricarboxyltriphenylamine (H3TCA) ligand, unusual hexaprismane Ni6O6 cluster, and functionalized pyrazine pillars [PYZ-x, x = -H (DZU-10), -NH2 (DZU-11), and -OH (DZU-12)], where the building blocks of Ni6O6 clusters and huddled pyrazine pillars are reported in porous MOFs for the first time. These building blocks have enabled the resulting materials to exhibit good chemical stability and variable pore chemistry, which thus contribute to distinct performances toward C2H2/CO2 separation. Both single-component isotherms and dynamic column breakthrough experiments demonstrate that DZU-11 with the PYZ-NH2 pillar outperforms its hydrogen and hydroxy analogues. Density functional theory calculations reveal that the higher C2H2 affinity of DZU-11 over CO2 is attributed to multiple electrostatic interactions between C2H2 and the framework, including strong C≡C···H-N (2.80 Å) interactions. This work highlights the potential of pore environment optimization to construct smart MOF adsorbents for some challenging gas separations.

A Green-Emission Metal-Organic Framework-Based Nanoprobe for Imaging Dual Tumor Biomarkers in Living Cells.

The modular nature of metal-organic frameworks (MOFs) permits their tunable structure and function for target application, such as in biomedicine. Herein, a green-emission Zr(IV)-MOF (BUT-88) was constructed from a customized luminescent carbazolyl ligand. BUT-88 represents the first bcu-type MOF with both organic linker and metal node in eight connections and shows medium-sized pores, rich accessible linking sites, and good water stability and biocompatibility. In virtue of these merits, BUT-88 was then fabricated into a MOF-based fluorescent nanoprobe, drDNA-BUT-88. Using it, the live-cell imaging of dual tumor biomarkers was achieved for the first time upon a MOF-based probe, offering enhanced detection precision in early cancer diagnosis. Particularly, the probe showed efficient ratiometric fluorescent sensing toward the cytoplasmic biomarker microRNA-21, further improving the detection accuracy at the cellular level. In this work, the elaborate combination of MOF engineering and the fluorescent detection technique has contributed a facile biosensing platform, unlocking more possibilities of MOF chemistry.

Reaction duration-dependent formation of two Cu(ii)-MOFs with selective adsorption properties of C3H4 over C3H6.

The formation of metal-organic frameworks (MOFs) under given reaction conditions depends on various factors including reaction duration, temperature, used solvent, system pH, and others. Among them, the reaction duration is relatively less investigated. In this work, based on a Cu(ii)-MOF system, the reaction duration was found to play an important role in directing the formation of two different products, (NH2(CH3)2)[Cu12(DDPN)6(H2O)10Cl] (BUT-301) on shorter reaction time and (NH2(CH3)2)2[Cu(DDPN)] (BUT-302) on longer reaction time, when CuCl2 reacted with 3,5-di(3,5-dicarboxylphenyl)nitrobenzene (H4DDPN) in a DMA/MeOH mixed solvent at 120 °C. With increasing the reaction duration, BUT-301 can transform into BUT-302. Both MOFs have three-dimensional (3D) framework structures. BUT-301 is constructed from paddle-wheel Cu2(COO)4 units and DDPN4- ligands as four-connected linkers, while BUT-302 is assembled from mononuclear Cu(ii) centers connecting the ligands as also four-connected linkers but in a monodentate coordination fashion. N2 adsorption confirmed that both MOFs are porous materials with the Brunauer-Emmett-Teller (BET) surface areas of 1953 and 561 m2 g-1, respectively. Interestingly, both BUT-301 and -302 show selective adsorption properties of C3H4 over C3H6. The C3H4/C3H6 adsorption selectivities were calculated to be 1.9 and 4.4 at 0.1 bar and 298 K by the ideal adsorbed solution theory (IAST) for a 1 : 99 C3H4/C3H6 mixture, respectively.

Constructing new metal-organic frameworks with complicated ligands from "One-Pot" in situ reactions.

Metal-organic frameworks (MOFs) have emerged as one of the most fascinating libraries of porous materials. In spite of their myriad merits, practical application of most MOFs is restricted due to their high preparation cost because of the complicated organic ligands involved. To address this limitation, we propose to use simple and cheap organic precursors to synthesize MOFs with complicated ligands via "one-pot" in situ reactions of these precursors along with the formation of new MOFs. In this work, we have carefully screened several organic reactions, through which target ligands were generated in situ from easily available reactants during the MOF construction. With this "one-pot" approach, the fabrication of a series of novel MOFs by integrating the organic covalent bond and the coordinate bond has thus been realized through the judicious selection of organic reactions, which effectively simplifies the MOF synthesis process and thus reduces the cost.

Tuning Water Sorption in Highly Stable Zr(IV)-Metal-Organic Frameworks through Local Functionalization of Metal Clusters.

Water adsorption of metal-organic frameworks (MOFs) is attracting intense interest because of their potential applications in atmospheric water harvesting, dehumidification, and adsorption-based heating and cooling. In this work, through using a hexacarboxylate ligand, four new isostructural Zr(IV)-MOFs (BUT-46F, -46A, -46W, and -46B) with rare low-symmetric 9-connected Zr6 clusters were synthesized and structurally characterized. These MOFs are highly stable in water, HCl aqueous solution (pH = 1), and NaOH aqueous solution (pH = 10) at room temperature, as well as in boiling water. Interestingly, the rational modification of the metal clusters in these MOFs with different functional groups (HCOO-, CH3COO-, H2O/OH, and PhCOO-) enables the precise tuning of their water adsorption properties, which is quite important for given application. Furthermore, all four MOFs show excellent regenerability under mild conditions and good cyclic performance in water adsorption.

Zr(IV)-Based Metal-Organic Framework with T-Shaped Ligand: Unique Structure, High Stability, Selective Detection, and Rapid Adsorption of Cr2O72- in Water.

Dichromate is known for severe health impairments to organisms. New and valid strategies have been developed to rapidly detect and efficiently remove this pollutant. Constructing stable luminescent metal-organic frameworks (MOFs) for dichromate recognition and removal from aqueous solution could provide a feasible resolution to this problem. Herein, a new luminescent Zr(IV)-MOF, Zr6O4(OH)7(H2O)3(BTBA)3 (BUT-39, BUT = Beijing University of Technology) was constructed through the reaction of a newly designed functionalized T-shaped ligand 4,4',4″-(1 H-benzo[ d]imidazole-2,4,7-triyl)tribenzoic acid (H3BTBA) with zirconium salt. BUT-39 has a unique porous framework structure, in which Zr6 cluster acts as a rare low-symmetric 9-connected node and BTBA3- as a T-shaped 3-connected linker. As far as we know, this represents the first case of a (3,9)-connected Zr(IV)-MOF. BUT-39 could retain its framework integrity in boiling water, 2 M HCl aqueous solution, and pH 12 NaOH aqueous solution. Due to its good water stability and strong fluorescent emission, BUT-39 is then employed in fluorescence sensing for various ions in aqueous solution and shows good performance toward Cr2O72- selectively, at a low concentration and a short response time (<1 min). Simultaneously, it also exhibits excellent capacity to rapidly capture Cr2O72- (within 1 min) with a high uptake up to 1 mmol g-1. Taking advantage of its excellent stability, sensitive and selective sensing, as well as rapid and high adsorption, BUT-39 is expected to be useful in Cr2O72- detection in and removal from water.