Textile-Based Wearable Sensor for Skin Hydration Monitoring.

This research describes a wearable skin hydration sensor based on cotton textile to determine the state of hydration within the skin via impedance analysis. The sensor structure comprises a textile substrate, thermoplastic over-layer, conductive patterns, and encapsulant, designed for stable and reliable monitoring of the skin's impedance change in relation to hydration level. The porcine skin with different hydration levels was prepared as a model system of the skin, and the textile-based sensor carefully investigated the porcine skin samples' impedance characteristics. The impedance study reveals that (1) the total impedance of skin decreases as its hydration level increases, and (2) the impedance of the stratum corneum and epidermis layers are more dominantly affected by the hydration level of the skin than the dermis layer. Even after repetitive bending cycles, the impedance data of skin measured by the sensor exhibit a reliable dependence on the skin hydration level, which validates the flexibility and durability of the sensor. Finally, it is shown that the textile-based skin hydration sensor can detect various body parts' different hydration levels of human skin while maintaining a stable conformal contact with the skin. The resulting data are well-matched with the readings from a commercial skin hydration sensor.

Oxygen-Carrying Micro/Nanobubbles: Composition, Synthesis Techniques and Potential Prospects in Photo-Triggered Theranostics.

Microbubbles and nanobubbles (MNBs) can be prepared using various shells, such as phospholipids, polymers, proteins, and surfactants. MNBs contain gas cores due to which they are echogenic and can be used as contrast agents for ultrasonic and photoacoustic imaging. These bubbles can be engineered in various sizes as vehicles for gas and drug delivery applications with novel properties and flexible structures. Hypoxic areas in tumors develop owing to an imbalance of oxygen supply and demand. In tumors, hypoxic regions have shown more resistance to chemotherapy, radiotherapy, and photodynamic therapies. The efficacy of photodynamic therapy depends on the effective accumulation of photosensitizer drug in tumors and the availability of oxygen in the tumor to generate reactive oxygen species. MNBs have been shown to reverse hypoxic conditions, degradation of hypoxia inducible factor 1α protein, and increase tissue oxygen levels. This review summarizes the synthesis methods and shell compositions of micro/nanobubbles and methods deployed for oxygen delivery. Methods of functionalization of MNBs, their ability to deliver oxygen and drugs, incorporation of photosensitizers and potential application of photo-triggered theranostics, have also been discussed.

Autonomic molecular transport by polymer films containing programmed chemical potential gradients.

Materials which induce molecular motion without external input offer unique opportunities for spatial manipulation of molecules. Here, we present the use of polyacrylamide hydrogel films containing built-in chemical gradients (enthalpic gradients) to direct molecular transport. Using a cationic tertiary amine gradient, anionic molecules were directionally transported up to several millimeters. A 40-fold concentration of anionic molecules dosed in aerosol form on a substrate to a small region at the center of a radially symmetric cationic gradient was observed. The separation of mixtures of charged dye molecules was demonstrated using a boronic acid-to-cationic gradient where one molecule was attracted to the boronic acid end of the gradient, and the other to the cationic end of the gradient. Theoretical and computational analysis provides a quantitative description of such anisotropic molecular transport, and reveals that the gradient-imposed drift velocity is in the range of hundreds of nanometers per second, comparable to the transport velocities of biomolecular motors. This general concept of enthalpy gradient-directed molecular transport should enable the autonomous processing of a diversity of chemical species.

A Transparent Hydrogel-Ionic Conductor with High Water Retention and Self-Healing Ability.

This study presents a transparent and ion-conductive hydrogel with suppressed water loss. The hydrogel comprises agarose polymer doped with sucrose and sodium chloride salt (NaCl-Suc/A hydrogel). Sucrose increases the water retention of the agarose gel, and the Na and Cl ions dissolved in the gel provide ionic conductivity. The NaCl-Suc/A gel shows high retention capability and maintains a 45% water uptake after 4 h of drying at 60 °C without encapsulation at the optimum gel composition. The doped NaCl-Suc/A hydrogel demonstrates improved mechanical properties and ionic conductivity of 1.6 × 10-2 (S/cm) compared to the pristine agarose hydrogel. The self-healing property of the gel restores the electrical continuity when reassembled after cutting. Finally, to demonstrate a potential application of the ion-conductive hydrogel, a transparent and flexible pressure sensor is fabricated using the NaCl-Suc/A hydrogel, and its performance is demonstrated. The results of this study could contribute to solving problems with hydrogel-based devices such as rapid dehydration and poor mechanical properties.

Interface of gallium-based liquid metals: oxide skin, wetting, and applications.

Gallium-based liquid metals (GaLMs) are promising for a variety of applications-especially as a component material for soft devices-due to their fluidic nature, low toxicity and reactivity, and high electrical and thermal conductivity comparable to solid counterparts. Understanding the interfacial properties and behaviors of GaLMs in different environments is crucial for most applications. When exposed to air or water, GaLMs form a gallium oxide layer with nanoscale thickness. This "oxide nano-skin" passivates the metal surface and allows for the formation of stable microstructures and films despite the high-surface tension of liquid metal. The oxide skin easily adheres to most smooth surfaces. While it enables effective printing and patterning of the GaLMs, it can also make the metals challenging to handle because it adheres to most surfaces. The oxide also affects the interfacial electrical resistance of the metals. Its formation, thickness, and composition can be chemically or electrochemically controlled, altering the physical, chemical, and electrical properties of the metal interface. Without the oxide, GaLMs wet metallic surfaces but do not wet non-metallic substrates such as polymers. The topography of the underlying surface further influences the wetting characteristics of the metals. This review outlines the interfacial attributes of GaLMs in air, water, and other environments and discusses relevant applications based on interfacial engineering. The effect of surface topography on the wetting behaviors of the GaLMs is also discussed. Finally, we suggest important research topics for a better understanding of the GaLMs interface.

Injectable composite hydrogels embedded with gallium-based liquid metal particles for solid breast cancer treatment via chemo-photothermal combination.

Photothermal therapy (PTT) holds great promise as a cancer treatment modality by generating localized heat at the tumor site. Among various photothermal agents, gallium-based liquid metal (LM) has been widely used as a new photothermal-inducible metallic compound due to its structural transformability. To overcome limitations of random aggregation and dissipation of administrated LM particles into a human body, we developed LM-containing injectable composite hydrogel platforms capable of achieving spatiotemporal PTT and chemotherapy. Eutectic gallium-indium LM particles were first stabilized with 1,2-Distearoyl-sn­glycero-3-phosphoethanolamine (DSPE) lipids. They were then incorporated into an interpenetrating hydrogel network composed of thiolated gelatin conjugated with 6-mercaptopurine (MP) chemodrug and poly(ethylene glycol)-diacrylate. The resulted composite hydrogel exhibited sufficient capability to induce MDA-MB-231 breast cancer cell death through a multi-step mechanism: (1) hyperthermic cancer cell death due to temperature elevation by near-infrared laser irradiation via LM particles, (2) leakage of glutathione (GSH) and cleavage of disulfide bonds due to destruction of cancer cells. As a consequence, additional chemotherapy was facilitated by GSH, leading to accelerated release of MP within the tumor microenvironment. The effectiveness of our composite hydrogel system was evaluated both in vitro and in vivo, demonstrating significant tumor suppression and killing. These results demonstrate the potential of this injectable composite hydrogel for spatiotemporal cancer treatment. In conclusion, integration of PTT and chemotherapy within our hydrogel platform offers enhanced therapeutic efficacy, suggesting promising prospects for future clinical applications. STATEMENT OF SIGNIFICANCE: Our research pioneers a breakthrough in cancer treatments by developing an injectable hydrogel platform incorporating liquid metal (LM) particle-mediated photothermal therapy and 6-mercaptopurine (MP)-based chemotherapy. The combination of gallium-based LM and MP achieves synergistic anticancer effects, and our injectable composite hydrogel acts as a localized reservoir for specific delivery of both therapeutic agents. This platform induces a multi-step anticancer mechanism, combining NIR-mediated hyperthermic tumor death and drug release triggered by released glutathione from damaged cancer populations. The synergistic efficacy validated in vitro and in vivo studies highlights significant tumor suppression. This injectable composite hydrogel with synergistic therapeutic efficacy holds immense promise for biomaterial-mediated spatiotemporal treatment of solid tumors, offering a potent targeted therapy for triple negative breast cancers.

Dielectrophoretic Capture of Cancer-Derived Small-Extracellular-Vesicle-Bound Janus Nanoparticles via Lectin-Glycan Interaction.

Glycosylation is closely related to cellular metabolism and disease progression. In particular, glycan levels in cancer cells and tissues increase during cancer progression. This upregulation of glycosylation in cancer cells may provide a basis for the development of new biomarkers for the targeting and diagnosis of specific cancers. Here, they developed a detection technology for pancreatic cancer cell-derived small extracellular vesicles (PC-sEVs) based on lectin-glycan interactions. Lectins specific for sialic acids are conjugated to Janus nanoparticles to induce interactions with PC-sEVs in a dielectrophoretic (DEP) system. PC-sEVs are selectively bound to the lectin-conjugated Janus nanoparticles (lectin-JNPs) with an affinity comparable to that of conventionally used carbohydrate antigen 19-9 (CA19-9) antibodies. Furthermore, sEVs-bound Lectin-JNPs (sEVs-Lec-JNPs) are manipulated between two electrodes to which an AC signal is applied for DEP capture. In addition, the proposed DEP system can be used to trap the sEVs-Lec-JNP on the electrodes. Their results, which are confirmed by lectin-JNPs using the proposed DEP system followed by target gene analysis, provide a basis for the development of a new early diagnostic marker based on the glycan characteristics of PC-sEVs. In turn, these novel detection methods could overcome the shortcomings of commercially available pancreatic cancer detection techniques.

The Dielectrophoretic Alignment of Biphasic Metal Fillers for Thermal Interface Materials.

Pad-type thermal interface materials (TIMs) with composite structures are required to exhibit high thermal conductivity while maintaining conformal contact with the heat sink, which is strongly influenced by the type and content of the thermally conductive filler. This study presents that biphasic metal particles can be effectively aligned using the dielectrophoretic chaining (DEP-C) mechanism, thereby enhancing the thermal conductivity of a pad-type TIM. A eutectic gallium-indium (EGaIn) alloy liquid metal and solid copper were used as the filler materials with two different phases. The biphasic metal particle mixture of EGaIn and Cu (EGaIn-Cu) were better aligned by DEP-C than when they presented individually because fusion between the two particles increased the effective size. As expected, the thermal conductivity of the TIM composites increased when DEP-C aligned the filler. Notably, TIMs with both EGaIn-Cu fillers showed the largest increase in thermal conductivity, of up to 64.6%, and the highest thermal conductivity values after DEP-C application compared to TIMs with only the EGaIn or Cu filler. Finally, the heat dissipation performance of the TIM composite on a lit light-emitting diode is shown, where the TIM with DEP-C-aligned fillers exhibits improved performance.

Liquid-Metal Core-Shell Particles Coated with Folate and Phospholipids for Targeted Drug Delivery and Photothermal Treatment of Cancer Cells.

Recently, several methods have been used for cancer treatment. Among them, chemotherapy is generally used, but general anticancer drugs may affect normal cells and tissues, causing various side effects. To reduce the side effects and increase the efficacy of anticancer drugs, a folate-based liquid-metal drug nanodelivery system was used to target the folate receptor, which is highly expressed in cancer cells. A phospholipid-based surface coating was formed on the surface of liquid-metal nanoparticles to increase their stability, and doxorubicin was loaded as a drug delivery system. Folate on the lipid shell surface increased the efficiency of targeting cancer cells. The photothermal properties of liquid metal were confirmed by near-infrared (NIR) laser irradiation. After treating cancerous and normal cells with liquid-metal particles and NIR irradiation, the particles were specifically bound to cancer cells for drug uptake, confirming photothermal therapy as a drug delivery system that is expected to induce cancer cell death through comprehensive effects such as vascular embolization in addition to targeting cancer cells.

Application of poly (vinyl alcohol)-cryogels to immobilizing nitrifiers: Enhanced tolerance to shear stress-induced destruction and viability control.

The hardness of poly (vinyl alcohol)-cryogels (PVA-CGs) was improved under three parameter conditions: 7.5 %-12.5 % PVA, 1-5 freezing-thawing cycles (FTCs), and the addition of 0 %-10 % glycerol as a cryoprotectant. This study investigated the effects of shear stress-induced destruction (SSID) on mechanical strength by inducing rapid erosion with a high frictional force. Tolerance to SSID (Tol-SSID) exhibited different sensitivities and trends depending on the above three fabrication parameters. The measured Tol-SSID exhibited consistent and inconsistent trends with tensile strength and swelling, respectively. Tol-SSID evaluation provides new insights into the practically meaningful mechanical strength of PVA-CGs against strong friction, which simulates extreme shear stress in a bioreactor. A PVA-CG with a PVA concentration of 10 % and in two FTCs resulted in Tol-SSID and tensile strength of 88.3 % and 0.59 kPa, respectively. Here, 5 % glycerol was added to maintain the bacterial respiration activity of immobilized nitrifiers of 0.097 mg-O2/g-VSS·min and survival of 88.6 %. The continuous mode of nitrification using the optimized PVA-CG for 10 days resulted in an ammonia removal rate of 0.2173 kg-N/m3·d, which is an improvement over cases without glycerol addition: 0.1426 and 0.1472 kg-N/m3·d for PVA-CGs in two and three FTCs, respectively.

Sequentially Coated Wavy Nanowire Composite Transparent Electrode for Stretchable Solar Cells.

Recent advances in fabricating stretchable and transparent electrodes have led to various techniques for establishing next-generation form-factor optoelectronic devices. Wavy Ag nanowire networks with large curvature radii are promising platforms as stretchable and transparent electrodes due to their high electrical conductivity and stretchability even at very high transparency. However, there are disadvantages such as intrinsic nonregular conductivity, large surface roughness, and nanowire oxidation in air. Here, we introduce electrically synergistic but mechanically independent composite electrodes by sequentially introducing conducting polymers and ionic liquids into the wavy Ag nanowire network to maintain the superior performance of the stretchable transparent electrode while ensuring overall conductivity, lower roughness, and long-term stability. In particular, plenty of ionic liquids can be incorporated into the uniformly coated conducting polymer so that the elastic modulus can be significantly lowered and sliding can occur at the nanowire interface, thereby obtaining the high mechanical stretchability of the composite electrode. Finally, as a result of applying the composite film as the stretchable transparent electrode of stretchable organic solar cells, the organic solar cell exhibits a high power conversion efficiency of 11.3% and 89% compared to the initial efficiency even at 20% tensile strain, demonstrating excellent stretching stability.

Effect of Surrounding Solvents on Interfacial Behavior of Gallium-Based Liquid Metal Droplets.

Gallium-based liquid metal (GaLM) alloys have been extensively used in applications ranging from electronics to drug delivery systems. To broaden the understanding and applications of GaLMs, this paper discusses the interfacial behavior of eutectic gallium-indium liquid metal (EGaIn) droplets in various solvents. No significant difference in contact angles of EGaIn is observed regardless of the solvent types. However, the presence or absence of a conical tip on EGaIn droplets after dispensing could indirectly support that the interfacial energy of EGaIn is relatively low in non-polar solvents. Furthermore, in the impact experiments, the EGaIn droplet bounces off in the polar solvents of water and dimethyl sulfoxide (DMSO), whereas it spreads and adheres to the substrate in the non-polar solvents of hexane and benzene. Based on the dimensionless We number, it can be stated that the different impact behavior depending on the solvent types is closely related to the interfacial energy of EGaIn in each solvent. Finally, the contact angles and shapes of EGaIn droplets in aqueous buffer solutions with different pH values (4, 7, and 10) are compared. In the pH 10 buffer solution, the EGaIn droplet forms a spherical shape without the conical tip, representing the high surface energy. This is associated with the dissolution of the "interfacial energy-reducing" surface layer on EGaIn, which is supported by the enhanced concentration of gallium ion released from EGaIn in the buffer solution.

Comparison of the incidence rates of hip and vertebral fragility fractures according to cataract surgery in elderly population: a nationwide cohort study.

Elderly patients who underwent cataract surgery showed lower prevalence and cumulative incidence rates of hip and vertebral fragility fractures than those who did not. Therefore, cataract surgery in elderly patients may reduce the incidence of hip and vertebral fragility fractures. PURPOSE: The purpose of this study was to compare the incidence rates of hip and vertebral fragility fractures between patients who underwent cataract surgery and those who did not, and to investigate the effect of cataract surgery on the incidence of fragility fracture in elderly population using nationwide claims data. METHODS: A total of 558,147 participants from the National Health Insurance Service - Senior cohort were included. The participants were set into the hip fracture group (507,651) and vertebral fracture group (507,899) depending on the type of fracture. RESULTS: The number of hip fractures that occurred in the non-cataract surgery (NC) group was 36,971 (9.9%), while 8850 (6.6%) hip fractures occurred in the cataract surgery (C) group. The number of vertebral fractures that occurred in the NC group was 38,689 (10.3%), while 10,112 (7.6%) vertebral fractures occurred in the C group (all p < .001). The hazard ratios of hip and vertebral fractures were 0.58 and 0.60 for the total population that had undergone cataract surgery (all p < .001). The cumulative incidence rates of both fractures in the cataract surgery group were significantly lower than those in the non-cataract surgery group during 10 years (all p < .0001). CONCLUSION: Elderly patients who underwent cataract surgery showed a lower prevalence of hip and vertebral fragility fractures than those who did not. In addition, the cumulative incidence rates of both fractures in the cataract surgery group were lower than those in the non-cataract surgery group. Therefore, cataract surgery in elderly patients may reduce the incidence of hip and vertebral fragility fractures.

Imbibition-induced selective wetting of liquid metal.

Herein, we present the imbibition-induced, spontaneous, and selective wetting characteristics of gallium-based liquid metal alloys on a metallized surface with micro-scale topographical features. Gallium-based liquid metal alloys are fascinating materials that have enormous surface tension; therefore, they are difficult to pattern into films. The complete wetting of eutectic alloy of gallium and indium is realized on microstructured copper surfaces in the presence of HCl vapor, which removes the native oxide from the liquid metal alloy. This wetting is numerically explained based on the Wenzel's model and imbibition process, revealing that the dimensions of the microstructures are critical for effective imbibition-driven wetting of the liquid metal. Further, we demonstrate that the spontaneous wetting of the liquid metal can be directed selectively along the microstructured region on the metallic surface to create patterns. This simple process enables the uniform coating and patterning of the liquid metal over large areas without an external force or complex processing. We demonstrate that the liquid metal-patterned substrates maintain electrical connection even in a stretched state and after repetitive stretching cycles.

Eco-Friendly Dye-Sensitized Solar Cells Based on Water-Electrolytes and Chlorophyll.

Organic solvents used for electrolytes of dye-sensitized solar cells (DSSCs) are generally not only toxic and explosive but also prone to leakage due to volatility and low surface tension. The representative dyes of DSSCs are ruthenium-complex molecules, which are expensive and require a complicated synthesis process. In this paper, the eco-friendly DSSCs were presented based on water-based electrolytes and a commercially available organic dye. The effect of aging time after the device fabrication and the electrolyte composition on the photovoltaic performance of the eco-friendly DSSCs were investigated. Plasma treatment of TiO2 was adopted to improve the dye adsorption as well as the wettability of the water-based electrolytes on TiO2. It turned out that the plasma treatment was an effective way of improving the photovoltaic performance of the eco-friendly DSSCs by increasing the efficiency by 3.4 times. For more eco-friendly DSSCs, the organic-synthetic dye was replaced by chlorophyll extracted from spinach. With the plasma treatment, the efficiency of the eco-friendly DSSCs based on water-electrolytes and chlorophyll was comparable to those of the previously reported chlorophyll-based DSSCs with non-aqueous electrolytes.

Manipulation of light transmission from stable magnetic microrods formed by the alignment of magnetic nanoparticles.

Due to the increasing energy consumption, smart technologies have been considered to automatically control energy loss. Smart windows, which can use external signals to modulate their transparency, can regulate solar energy by reflecting excess energy and retaining the required energy in a building without using additional energy to cool or heat the interiors of the building. Although many technologies have been developed for smart windows, they still need to be economically optimised. Here, we propose a facile method to synthesise magnetic microrods from magnetic nanoparticles by alignment using a magnetic field. To maximise the transparency difference in the ON and OFF states, we controlled the nanoparticle concentration in a dispersion liquid, magnetic field application time, and viscosity of the dispersant. Interestingly, the magnetic microrods remained stable when we mixed short-chain polymers (polyethylene glycol) with a liquid dispersant (isopropyl alcohol). Furthermore, the Fe2O3 microrods maintained their shape for more than a week, while the Fe3O4 microrods clustered after a day because they became permanent magnets. The anisotropic features of the magnetic rods were used as a light valve to control the transparency of the smart window.

Exosome-mediated diagnosis of pancreatic cancer using lectin-conjugated nanoparticles bound to selective glycans.

The unique profile of upregulated glycosylation in metastatic cancer cells may form the basis for the development of new biomarkers for the targeting and diagnosis of specific cancers. This study introduces a pancreatic cancer cell-derived exosome detection technology, which is based on the specific binding of lectins to distinctive glycan profiles on the surface of exosomes. Lectins with a high and specific affinity for sialic acid or fucose were attached to bifunctional Janus nanoparticles (JNPs), which facilitated interactions with pancreatic cancer cell-derived exosomes in a microfluidic device. Here, we show that pancreatic cancer cell-derived exosomes from two cell lines and plasma samples collected from patients diagnosed with pancreatic cancer were successfully captured on the lectin-conjugated JNPs with affinities that were comparable to those of CA19-9, a conventional antibody. In addition, exosome detection using our platform could differentiate between metastatic and nonmetastatic pancreatic cancer cells. This study opens the possibility to achieve a new early diagnosis marker based on the glycan properties of pancreatic cancer cell-derived exosomes.

Study and Evaluation of the Potential of Lipid Nanocarriers for Transdermal Delivery of siRNA.

The topical delivery of siRNA-based therapies has opened new avenues for the treatment of skin disorders. The use of siRNA as a therapeutic, however, is limited due to its rapid degradation and poor cellular uptake. Furthermore, the top layer of skin, the stratum corneum, is a major barrier to the delivery of topical agents. There is an unmet need for efficient topical formulations for delivering siRNA to the site of action. In this study, 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) or lipofectamine is used to prepare a nanocarrier for delivering siRNA against glyceraldehyde 3-phosphate dehydrogenase (GAPDH); GAPDH expression is then evaluated at the cellular level. In addition, a dermal transport assay is designed and implemented to evaluate the penetration and delivery efficacy of siRNA in pig skin using lipid nanocarriers. The delivery of siRNA with the use of a lipid nanocarrier is significantly better than the delivery of siRNA without it. Thus, the findings identify lipid nanocarriers as excellent candidates for the transdermal delivery of siRNA for gene silencing in the skin and thus for applications in related preclinical models.

Dielectrophoretic Manipulation of Janus Particle in Conductive Media for Biomedical Applications.

Janus particles are applied to many fields including biomedical applications. To expand the usability of Janus particles, a technique to manipulate the particle movement is required. A dielectrophoresis (DEP) method can be a promising candidate; however, independent manipulation or separation of Janus particle by DEP is still challenging. Additionally, DEP of Janus particles in conductive media is important especially for biomedical applications where ion-rich media are typically used. Here, the experimental results of DEP-induced transport and separation of the Janus particle in conductive media are presented. To predict the DEP behavior, the Clausius-Mossotti (CM) factors of both Janus and homogeneous particles are calculated, depending on the alternating current (AC) frequency and medium conductivity. The Janus particles show the positive-DEP behavior at the entire AC frequency region tested due to the metal-coated half surface. On the other hand, the homogeneous particles show the negative-DEP behavior at the high AC frequency or in conductive media. Additionally, in the conductive media, an electrohydrodynamic flow hinders the DEP-driven particle transport below MHz AC frequencies. Finally, the separation of the Janus particles from the homogeneous ones is experimentally demonstrated and the separation efficiency is discussed based on the evaluation parameters established in this study.

Cytotoxicity of Gallium-Indium Liquid Metal in an Aqueous Environment.

Eutectic gallium-indium alloy (EGaIn) liquid metal is highly conductive, moldable, and extremely deformable and has attracted significant attention for many applications, ranging from stretchable electronics to drug delivery. Even though EGaIn liquid metal is generally known to have low toxicity, the toxicity of the metal, rather than a salt form of Ga or In, has not been systematically studied yet. In this paper, we investigate the time-dependent concentration of the ions released from EGaIn liquid metal in an aqueous environment and their cytotoxicity to human cells. It is observed that only the Ga ion is dominantly released from EGaIn when no external agitation is applied, whereas the concentration of the In ion drastically increases with sonication. The cytotoxicity study reveals that all human cells tested are viable in the growth media with naturally released EGaIn ions, but the cytotoxicity becomes significant with sonication-induced EGaIn releasates. On the basis of the comparative study with other representative toxic elements, that is, Hg and Cd, it could be concluded that EGaIn is reasonably safe to use in an aqueous environment; however, it should be cautiously handled when any mechanical agitation is applied.