Amisulpride as a potential disease-modifying drug in the treatment of tauopathies.

INTRODUCTION: Hyperphosphorylation and aggregation of the microtubule-associated protein tau cause the development of tauopathies, such as Alzheimer's disease and frontotemporal dementia (FTD). We recently uncovered a causal link between constitutive serotonin receptor 7 (5-HT7R) activity and pathological tau aggregation. Here, we evaluated 5-HT7R inverse agonists as novel drugs in the treatment of tauopathies. METHODS: Based on structural homology, we screened multiple approved drugs for their inverse agonism toward 5-HT7R. Therapeutic potential was validated using biochemical, pharmacological, microscopic, and behavioral approaches in different cellular models including tau aggregation cell line HEK293 tau bimolecular fluorescence complementation, primary mouse neurons, and human induced pluripotent stem cell-derived neurons carrying an FTD-associated tau mutation as well as in two mouse models of tauopathy. RESULTS: Antipsychotic drug amisulpride is a potent 5-HT7R inverse agonist. Amisulpride ameliorated tau hyperphosphorylation and aggregation in vitro. It further reduced tau pathology and abrogated memory impairment in mice. DISCUSSION: Amisulpride may be a disease-modifying drug for tauopathies.

Molecular and cellular responses to long-term sound exposure in peled (Coregonus peled).

This research examined the impacts of acoustic stress in peled (Coregonus peled Gmelin, 1788), a species commonly cultivated in Russia. This study presents a comparative analysis of the macula sacculi and otoliths, as well as primary hematological and secondary telomere stress responses, in control and sound-exposed peled. The authors measured the effects of long-term (up to 18 days) exposure to a 300 Hz tone at mean sound pressure levels of 176-186 dB re 1 µPa (SPLpk-pk); the frequency and intensity were selected to approximate loud acoustic environments associated with cleaning equipment in aquaculture settings. Acoustic exposure resulted in ultrastructure changes to otoliths, morphological damage to sensory hair cells of the macula sacculi, and a gradual decrease in the number of functionally active mitochondria in the red blood cells but no changes to telomeres. Changes were apparent following at least ten days of acoustic exposure. These data suggest that acoustic exposure found in some aquaculture settings could cause stress responses and auditory damage to peled and, potentially, other commercially important species. Reducing sound levels in fish rearing facilities could contribute to the formation of effective aquaculture practices that mitigate noise-induced stress in fishes.

Fabrication and Handling of 3D Scaffolds Based on Polymers and Decellularized Tissues.

Polymeric, ceramic and hybrid material-based three-dimensional (3D) scaffold or matrix structures are important for successful tissue engineering. While the number of approaches utilizing the use of cell-based scaffold and matrix structures is constantly growing, it is essential to provide a framework of their typical preparation and evaluation for tissue engineering. This chapter describes the fabrication of 3D scaffolds using two-photon polymerization, decellularization and cell encapsulation methods and easy-to-use protocols allowing assessing the cell morphology, cytotoxicity and viability in these scaffolds.

Thermal Preconditioning Alters the Stability of Hump-Snout Whitefish (Coregonus fluviatilis) and Its Hybrid Form, Showing Potential for Aquaculture.

One of the little-studied ways that climate warming or temperature increases in aquaculture could affect aquatic animals is through accelerated aging. This study is dedicated to understanding the principles of molecular and cellular aging in the target tissues of juvenile whitefishes (Yenisei hump-snout whitefish and its hybrid) under the influence of acute heat stress (up to 26 °C), and the effects of thermal preconditioning as pre-adaptation. Non-adapted stressed hump-snout whitefish showed a higher induction threshold for functionally active mitochondria in the blood and a decrease in telomerase activity in the liver after heat shock exposure as a long-term compensatory response to prevent telomere shortening. However, we observed heat-induced telomere shortening in non-adapted hybrids, which can be explained by a decrease in mitochondrial membrane stability and a gradual increase in energy demand, leading to a decrease in protective telomerase activity. The pre-adapted groups of hump-snout whitefish and hybrids showed a long-term or delayed response of telomerase activity to heat shock, which served as a therapeutic mechanism against telomere shortening. We concluded that the telomerase and telomere responses to thermal stress demonstrate plasticity of tolerance limits and greater stability in hump-snout whitefish compared with hybrids.

Laser-engineered topography: correlation between structure dimensions and cell control.

Topographical cues have a significant impact on cell responses and by this means, on the fabrication of innovative implant materials. However, analysis of cell-topography interactions in dependence of the surface feature dimensions is still challenging due to limitations in the fabrication technology. Here, we introduce surface structuring via picosecond laser systems, which enable a fast production of micro-sized topologies. Changes in the processing parameters further control the feature sizes of so-called spikes. Using surfaces with big and small spike-to-spike-distances for comparisons, we focussed on cell adhesion via extracellular matrix adsorption and focal adhesion complexes, morphology, localisation and proliferation of fibroblasts. The observed cell control was dependent on a turnover point related to the structure dimensions: only big spike-to-spike-distances reduced cell behaviour. Therefore, this technology offers a platform to study cell and tissue interactions with a defined microenvironment.

In Vitro Development of Human iPSC-Derived Functional Neuronal Networks on Laser-Fabricated 3D Scaffolds.

Neural progenitor cells generated from human induced pluripotent stem cells (hiPSCs) are the forefront of ″brain-on-chip″ investigations. Viable and functional hiPSC-derived neuronal networks are shaping powerful in vitro models for evaluating the normal and abnormal formation of cortical circuits, understanding the underlying disease mechanisms, and investigating the response to drugs. They therefore represent a desirable instrument for both the scientific community and the pharmacological industry. However, culture conditions required for the full functional maturation of individual neurons and networks are still unidentified. It has been recognized that three-dimensional (3D) culture conditions can better emulate in vivo neuronal tissue development compared to 2D cultures and thus provide a more desirable in vitro approach. In this paper, we present the design and implementation of a 3D scaffold platform that supports and promotes intricate neuronal network development. 3D scaffolds were produced through direct laser writing by two-photon polymerization (2PP), a high-resolution 3D laser microstructuring technology, using the biocompatible and nondegradable photoreactive resin Dental LT Clear (DClear). Neurons developed and interconnected on a 3D environment shaped by vertically stacked scaffold layers. The developed networks could support different cell types. Starting at the day 50 of 3D culture, neuronal progenitor cells could develop into cortical projection neurons (CNPs) of all six layers, different types of inhibitory neurons, and glia. Additionally and in contrast to 2D conditions, 3D scaffolds supported the long-term culturing of neuronal networks over the course of 120 days. Network health and functionality were probed through calcium imaging, which revealed a strong spontaneous neuronal activity that combined individual and collective events. Taken together, our results highlight advanced microstructured 3D scaffolds as a reliable platform for the 3D in vitro modeling of neuronal functions.

Sex Associated Effects of Noise Pollution in Stone Sculpin (Paracottus knerii) as a Model Object in the Context of Human-Induced Rapid Environmental Change.

This work simulates the consequences of HIREC using stone sculpins as model organisms. Sex-dependent effects of long-term noise exposure at mean sound pressure levels of 160-179 dB re 1 µPa (SPLpk-pk) were measured. We applied a multilevel approach to testing the stress response: a comparative analysis of the macula sacculi and an assessment of hematological and molecular stress responses. Noise exposure resulted in hair cell loss, changes in some cytometric parameters in blood, and an increase in the number of functionally active mitochondria in the red blood cells of males and its decrease in females, demonstrating a mitochondrial allostatic load and depletion of functional reserve. Finally, a statistically significant decrease in the telomerase activity of the auditory epithelium and a shortening of telomere length in the brain as molecular markers of stress were observed after noise exposure only in females. No significant decrease in telomerase activity and shortening of telomere length in nerve target tissues were observed in stressed males. However, we recorded an increase in the telomerase activity in male gonads. This sex-dependent difference in load may be associated with accelerated cellular aging in females and lower stress-related long-term risk in males. In this article, we discuss possible reasons for these noise-induced stress effects.

Time resolved 3D live-cell imaging on implants.

It is estimated that two million new dental implants are inserted worldwide each year. Innovative implant materials are developed in order to minimize the risk of peri-implant inflammations. The broad range of material testing is conducted using standard 2D, terminal, and invasive methods. The methods that have been applied are not sufficient to monitor the whole implant surface and temporal progress. Therefore, we built a 3D peri-implant model using a cylindrical implant colonized by human gingival fibroblasts. In order to monitor the cell response over time, a non-toxic LIVE/DEAD staining was established and applied to the new 3D model. Our LIVE/DEAD staining method in combination with the time resolved 3D visualization using Scanning Laser Optical Tomography (SLOT), allowed us to monitor the cell death path along the implant in the 3D peri-implant model. The differentiation of living and dead gingival fibroblasts in response to toxicity was effectively supported by the LIVE/DEAD staining. Furthermore, it was possible to visualize the whole cell-colonized implant in 3D and up to 63 hours. This new methodology offers the opportunity to record the long-term cell response on external stress factors, along the dental implant and thus to evaluate the performance of novel materials/surfaces.

High-resolution 3D photopolymerization assisted by upconversion nanoparticles for rapid prototyping applications.

Three-dimensional (3D) rapid prototyping technology based on near-infrared light-induced polymerization of photocurable compositions containing upconversion nanomaterials has been explored. For this aim, the rationally-designed core/shell upconversion nanoparticles NaYF4:Yb3+,Tm3+/NaYF4, with the distinct ultraviolet-emitting lines and unprecedentedly high near-infrared to ultraviolet conversion efficiency of [Formula: see text] have been used. The upconverted ultraviolet photons were capable to efficiently activate photoinitiators contained in light-sensitive resins under moderate intensities of NIR excitation below 10 W cm-2 and induce generation of radicals and photopolymerization in situ. Near infrared-activated polymerization process, both at the millimeter and sub-micron scales, was investigated. Polymeric macro- and microstructures were fabricated by means of near infrared laser scanning photolithography in the volume of liquid photocurable compositions with focused laser light at 975 nm wavelength. Examination of the polymerization process in the vicinity of the nanoparticles shows strong differences in the rate of polymer shell growth on flat and edge nanoparticle sides. This phenomenon mainly defines the resolution of the demonstrated near infrared - ultraviolet 3D printing technology at the micrometer scale level.

Novel biodegradable star-shaped polylactide scaffolds for bone regeneration fabricated by two-photon polymerization.

AIM: To assess the properties of 3D biodegradable scaffolds fabricated from novel star-shaped poly(D,L-lactide) (SSL) materials for bone tissue regeneration. MATERIALS & METHODS: The SSL polymer was synthesized using an optimized synthetic procedure and applied for scaffold fabrication by the two-photon polymerization technique. The osteogenic differentiation was controlled using human adipose-derived stem cells cultured for 28 days. The SSL scaffolds with or without murine MSCs were implanted into the cranial bone of C57/Bl6 mice. RESULTS: The SSL scaffolds supported differentiation of human adipose-derived stem cells toward the osteogenic lineage in vitro. The SSL scaffolds with murine MSCs enhanced the mineralized tissue formation. CONCLUSION: The SSL scaffolds provide a beneficial microenvironment for the osteogenic MSCs' differentiation in vitro and support de novo bone formation in vivo.

Grid-like surface structures in thermoplastic polyurethane induce anti-inflammatory and anti-fibrotic processes in bone marrow-derived mesenchymal stem cells.

The use of autologous cells for the coating of implant surfaces presents a promising tool to attenuate foreign body reaction and inflammation. However, insertion forces that occur especially during implantation of electrodes into the narrow cochlea may strip off cells from the surface. Thus, implant surfaces should be ideally structured in a way that protects the cell coating from mechanical removal during implantation. The structuring of implant surfaces may also direct cells towards desired functions to further enhance their performance and clinical suitability. In this study, grid-like square cavities were generated on thermoplastic polyurethane (TPU) surfaces using a combination of femtosecond laser ablation and replication methods. Afterwards, they were tested as potential scaffolds for human bone marrow-derived mesenchymal stem cells (MSCs) in order to use it on neural prostheses. Structured and non-structured TPU allowed proper adhesion and survival of MSCs. Surface structuring resulted in regulation of over 500 genes. Many of the upregulated genes are known to be involved in anti-inflammatory, anti-fibrotic and wound healing processes whereas genes relevant for mesenchymal differentiation programs were downregulated. The enhanced secretion of two representative factors (prostaglandin E2 and interleukin-1 receptor antagonist, respectively) was confirmed by ELISA and the downregulation of other genes involved in adipogenic and osteogenic differentiation were confirmed by gene expression analysis for a cultivation period of up to 21 days. In addition, mRNA of the surface antigens CD24 and ENDOGLIN (CD105) as representative factors for stemness did not show notable variation between cultivation on structured versus non-structured TPU or between 7 versus 21days of cultivation. Thus, surface topography of TPU seems to be a powerful tool to protect cells from mechanical forces during insertion and to influence cell behaviour.

Osteogenic differentiation of human mesenchymal stem cells in 3-D Zr-Si organic-inorganic scaffolds produced by two-photon polymerization technique.

Two-photon polymerization (2PP) is applied for the fabrication of 3-D Zr-Si scaffolds for bone tissue engineering. Zr-Si scaffolds with 150, 200, and 250 µm pore sizes are seeded with human bone marrow stem cells (hBMSCs) and human adipose tissue derived stem cells (hASCs) and cultured in osteoinductive and control media for three weeks. Osteogenic differentiation of hASCs and hBMSCs and formation of bone matrix is comparatively analyzed via alkaline phosphatase activity (ALP), calcium quantification, osteocalcin staining and scanning electron microscopy (SEM). It is observed that the 150 µm pore size Zr-Si scaffolds support the strongest matrix mineralization, as confirmed by calcium deposition. Analysis of ALP activity, osteocalcin staining and SEM observations of matrix mineralization reveal that mesenchymal stem cells cultured on 3-D scaffolds without osteogenic stimulation spontaneously differentiate towards osteogenic lineage. Nanoindentation measurements show that aging of the 2PP-produced Zr-Si scaffolds in aqueous or alcohol media results in an increase in the scaffold Young's modulus and hardness. Moreover, accelerated formation of bone matrix by hASCs is noted, when cultured on the scaffolds with lower Young's moduli and hardness values (non aged scaffolds) compared to the cells cultured on scaffolds with higher Young's modulus and hardness values (aged scaffolds). Presented results support the potential application of Zr-Si scaffolds for autologous bone tissue engineering.

Two-photon polymerization of 3-D zirconium oxide hybrid scaffolds for long-term stem cell growth.

Two-photon polymerization is a technique that involves simultaneous absorption of two photons from a femtosecond laser for selective polymerization of a photosensitive material. In this study, two-photon polymerization was used for layer-by-layer fabrication of 3-D scaffolds composed of an inorganic-organic zirconium oxide hybrid material. Four types of scaffold microarchitectures were created, which exhibit layers of parallel line features at various orientations as well as pores between the line features. Long-term cell culture studies involving human bone marrow stromal cells were conducted using these 3-D scaffolds. Cellular adhesion and proliferation were demonstrated on all of the scaffold types; tissuelike structure was shown to span the pores. This study indicates that two-photon polymerization may be used to create microstructured scaffolds out of an inorganic-organic zirconium oxide hybrid material for use in 3-D tissue culture systems.

Laser microstructured biodegradable scaffolds.

The two-photon polymerization technique (2PP) uses non-linear absorption of femtosecond laser pulses to selectively polymerize photosensitive materials. 2PP has the ability to fabricate structures with a resolution from tens of micrometers down to hundreds of nanometers. Three-dimensional microstructuring by the 2PP technique provides many interesting possibilities for biomedical applications. This microstructuring technique is suitable with many biocompatible polymeric materials, such as polyethylene glycol, polylactic acid, polycaprolactone, gelatin, zirconium-based hybrids, and others. The process of fabrication does not require clean room conditions and does not use hazard chemicals or high temperatures. The most beneficial property of 2PP is that it is capable of producing especially complex three-dimensional (3-D) structures, including devices with overhangs, without using any supportive structure. The flexibility in controlling geometries and feature sizes and the possibility to fabricate structures without the addition of new material layers makes this technique particularly appealing for fabrication of 3-D scaffolds for tissue engineering.

Two-photon polymerization microstructuring in regenerative medicine.

Two-photon polymerization has developed as a powerful tool for making micro- and nanoscale structures for regenerative medicine applications. This review discusses micro- and nanoscale aspects of tissue engineering, which are followed by a brief description of the two-photon polymerization process and how it has been used thus far in tissue engineering and other regenerative medicine applications. Lastly, potential future applications of two-photon polymerization in regenerative medicine are presented. This review provides a comprehensive summary of the uses of two-photon polymerization thus far in regenerative medicine and a look into how this technique will be used in the future.

Two-photon polymerization of polyethylene glycol diacrylate scaffolds with riboflavin and triethanolamine used as a water-soluble photoinitiator.

AIM: In this study, the suitability of a mixture containing riboflavin (vitamin B2) and triethanolamine (TEOHA) as a novel biocompatible photoinitiator for two-photon polymerization (2PP) processing was investigated. MATERIALS & METHODS: Polyethylene glycol diacrylate was crosslinked using Irgacure(®) 369, Irgacure 2959 or a riboflavin-TEOHA mixture; biocompatibility of the photopolymer extract solutions was subsequently assessed via endothelial cell proliferation assay, endothelial cell viability assay and single-cell gel electrophoresis (comet) assay. Use of a riboflavin-TEOHA mixture as a photoinitiator for 2PP processing of a tissue engineering scaffold and subsequent seeding of this scaffold with GM-7373 bovine aortic endothelial cells was also demonstrated. RESULTS: The riboflavin-TEOHA mixture was found to produce much more biocompatible scaffolds than those produced with Irgacure 369 or Irgacure 2959. CONCLUSION: The results suggest that riboflavin is a promising component of photoinitiators for 2PP fabrication of tissue engineering scaffolds and other medically relevant structures (e.g., biomicroelectromechanical systems).

Fabrication of fibrin scaffolds with controlled microscale architecture by a two-photon polymerization-micromolding technique.

Fabrication of three-dimensional (3D) fibrin scaffolds with tightly controllable pore sizes and interconnections has been investigated. The scaffolds were produced using a combination of two-photon polymerization (2PP) and micromolding techniques. Master structures were fabricated by 2PP and regenerated in fibrin by a two-step microreplication procedure. Scanning electron and optical microscopy observations showed that the fibrin scaffolds exhibited a highly porous and interconnected structure. Seeding of endothelial cells in fibrin scaffolds resulted in their directed lining and spreading within network of microreplicated pores, whereas encapsulation of endothelial cells in fibrin gel blocks led to their chaotic and irregular distribution within constructs. These results demonstrate that the 2PP-micromolding technique is suitable for fabrication of complex 3D structures from natural proteins for tissue engineering applications.

Fabrication of microscale medical devices by two-photon polymerization with multiple foci via a spatial light modulator.

Two-photon polymerization is an appealing technique for producing microscale devices due to its flexibility in producing structures with a wide range of geometries as well as its compatibility with materials suitable for biomedical applications. The greatest limiting factor in widespread use of two-photon polymerization is the slow fabrication times associated with line-by-line, high-resolution structuring. In this study, a recently developed technology was used to produce microstructures by two-photon polymerization with multiple foci, which significantly reduces the production time. Computer generated hologram pattern technology was used to generate multiple laser beams in controlled positions from a single laser. These multiple beams were then used to simultaneously produce multiple microstructures by two-photon polymerization. Arrays of micro-Venus structures, tissue engineering scaffolds, and microneedle arrays were produced by multifocus two-photon polymerization. To our knowledge, this work is the first demonstration of multifocus two-photon polymerization technology for production of a functional medical device. Multibeam fabrication has the potential to greatly improve the efficiency of two-photon polymerization production of microscale devices such as tissue engineering scaffolds and microneedle arrays.

Laser fabrication of large-scale nanoparticle arrays for sensing applications.

A novel method for high-speed fabrication of large scale periodic arrays of nanoparticles (diameters 40-200 nm) is developed. This method is based on a combination of nanosphere lithography and laser-induced transfer. Fabricated spherical nanoparticles are partially embedded into a polymer substrate. They are arranged into a hexagonal array and can be used for sensing applications. An optical sensor with the sensitivity of 365 nm/RIU and the figure of merit of 21.5 in the visible spectral range is demonstrated.