Controlled lateral anisotropy in correlated manganite heterostructures by interface-engineered oxygen octahedral coupling.

Controlled in-plane rotation of the magnetic easy axis in manganite heterostructures by tailoring the interface oxygen network could allow the development of correlated oxide-based magnetic tunnelling junctions with non-collinear magnetization, with possible practical applications as miniaturized high-switching-speed magnetic random access memory (MRAM) devices. Here, we demonstrate how to manipulate magnetic and electronic anisotropic properties in manganite heterostructures by engineering the oxygen network on the unit-cell level. The strong oxygen octahedral coupling is found to transfer the octahedral rotation, present in the NdGaO3 (NGO) substrate, to the La2/3Sr1/3MnO3 (LSMO) film in the interface region. This causes an unexpected realignment of the magnetic easy axis along the short axis of the LSMO unit cell as well as the presence of a giant anisotropic transport in these ultrathin LSMO films. As a result we possess control of the lateral magnetic and electronic anisotropies by atomic-scale design of the oxygen octahedral rotation.

Localized Control of Curie Temperature in Perovskite Oxide Film by Capping-Layer-Induced Octahedral Distortion.

With reduced dimensionality, it is often easier to modify the properties of ultrathin films than their bulk counterparts. Strain engineering, usually achieved by choosing appropriate substrates, has been proven effective in controlling the properties of perovskite oxide films. An emerging alternative route for developing new multifunctional perovskite is by modification of the oxygen octahedral structure. Here we report the control of structural oxygen octahedral rotation in ultrathin perovskite SrRuO_{3} films by the deposition of a SrTiO_{3} capping layer, which can be lithographically patterned to achieve local control. Using a scanning Sagnac magnetic microscope, we show an increase in the Curie temperature of SrRuO_{3} due to the suppression octahedral rotations revealed by the synchrotron x-ray diffraction. This capping-layer-based technique may open new possibilities for developing functional oxide materials.

Extreme mobility enhancement of two-dimensional electron gases at oxide interfaces by charge-transfer-induced modulation doping.

Two-dimensional electron gases (2DEGs) formed at the interface of insulating complex oxides promise the development of all-oxide electronic devices. These 2DEGs involve many-body interactions that give rise to a variety of physical phenomena such as superconductivity, magnetism, tunable metal-insulator transitions and phase separation. Increasing the mobility of the 2DEG, however, remains a major challenge. Here, we show that the electron mobility is enhanced by more than two orders of magnitude by inserting a single-unit-cell insulating layer of polar La(1-x)Sr(x)MnO3 (x = 0, 1/8, and 1/3) at the interface between disordered LaAlO3 and crystalline SrTiO3 produced at room temperature. Resonant X-ray spectroscopy and transmission electron microscopy show that the manganite layer undergoes unambiguous electronic reconstruction, leading to modulation doping of such atomically engineered complex oxide heterointerfaces. At low temperatures, the modulation-doped 2DEG exhibits Shubnikov-de Haas oscillations and fingerprints of the quantum Hall effect, demonstrating unprecedented high mobility and low electron density.

[Total and unicompartmental knee replacement. Patient-specific Instrumentation]. / Uni- und bikondylärer Oberflächenersatz. Patientenspezifische Instrumentierung.

BACKGROUND: The objective of patient-specific instrumentation (PSI Zimmer®) technology is to optimize positioning and selection of components as well as surgical procedure in uni- and bicompartimental knee replacement. The article contains a description of the planning and surgical technique and evaluates the method based on own results and literature. METHODS: Using MRI or CT scans a virtual 3D model of the joint is created in order to simulate and plan the implant positioning. According to these data, pin placement and/or cutting guides are produced, which enable the surgeon to transfer the planning to the surgical procedure. In a prospective comparative study 88 patients (44 per each of the two techniques) were operated by one surgeon receiving the same TKA using either MRI-based PSI or a conventional technique. The number of surgical trays, operating time, intraoperative changes and frontal alignment using a full leg x­ray (70 cases) were compared. In 17 patients the method was applied with unicondylar knee replacement. RESULTS: Anatomical abnormalities could be detected preoperatively and considered during the operation. With PSI the number of trays could be reduced and predictability of the component size was more precise. Intraoperative changes became necessary only for distal femoral (25 %) and proximal tibial (36 %) resection and tibial rotation (40 %). Alignment was more precise in the PSI cases DISCUSSION: PSI using the applied technique proved to be practicable and reliable. The advantages of precise planning became obvious. Results concerning alignment are inconsistent in the literature. Soft tissue balancing has only been included in the technique to a limited degree so far. PSI is still in an early stage of development and further development opportunities should be exploited before final assessment.

Electronic reconstruction at the isopolar LaTiO(3)/LaFeO(3) interface: an X-ray photoemission and density-functional theory study.

We report the formation of a nonmagnetic band insulator at the isopolar interface between the antiferromagnetic Mott-Hubbard insulator LaTiO_{3} and the antiferromagnetic charge transfer insulator LaFeO_{3}. By density-functional theory calculations, we find that the formation of this interface state is driven by the combination of O band alignment and crystal field splitting energy of the t_{2g} and e_{g} bands. As a result of these two driving forces, the Fe 3d bands rearrange and electrons are transferred from Ti to Fe. This picture is supported by x-ray photoelectron spectroscopy, which confirms the rearrangement of the Fe 3d bands and reveals an unprecedented charge transfer up to 1.2±0.2 e^{-}/interface unit cell in our LaTiO_{3}/LaFeO_{3} heterostructures.

Observation of Mermin-Wagner behavior in LaFeO3/SrTiO3 superlattices.

Two-dimensional magnetic materials can exhibit new magnetic properties due to the enhanced spin fluctuations that arise in reduced dimension. However, the suppression of the long-range magnetic order in two dimensions due to long-wavelength spin fluctuations, as suggested by the Mermin-Wagner theorem, has been questioned for finite-size laboratory samples. Here we study the magnetic properties of a dimensional crossover in superlattices composed of the antiferromagnetic LaFeO3 and SrTiO3 that, thanks to their large lateral size, allowed examination using a sensitive magnetic probe - muon spin rotation spectroscopy. We show that the iron electronic moments in superlattices with 3 and 2 monolayers of LaFeO3 exhibit a static antiferromagnetic order. In contrast, in the superlattices with single LaFeO3 monolayer, the moments do not order and fluctuate to the lowest measured temperature as expected from the Mermin-Wagner theorem. Our work shows how dimensionality can be used to tune the magnetic properties of ultrathin films.

Strong philopatry in an estuarine-dependent fish.

Understanding fish movement is critical in determining the spatial scales in which to appropriately manage wild populations. Genetic markers provide a natural tagging approach to assess the degree of gene flow and population connectivity across a species distribution. We investigated the genetic structure of black bream Acanthopagrus butcheri across its entire distribution range in Australia, as well as regional scale gene flow across south-eastern Australia by undertaking a comprehensive analysis of the populations in estuaries across the region. We applied genome-wide sampling of single-nucleotide polymorphism (SNP) markers generated from restriction site-associated DNA sequencing. Genetic structure and potential gene flow was assessed using principal component analyses and admixture analyses (STRUCTURE). Using 33,493 SNPs, we detected broad scale genetic structuring, with limited gene flow among regional clusters (i.e. Western Australia, South Australia and western Victoria; and eastern Victoria, Tasmania and New South Wales). This is likely the result of unsuitable habitats, strong ocean currents (e.g. the Leeuwin Current and the East Australian Current), large water bodies (e.g. Bass Strait) and known biogeographical provinces across the continent. Local-scale genetic structuring was also identified across the south-eastern Australian estuaries sampled, reflecting that the coexistence of both migratory and resident individuals within populations (i.e. partial migration), and the movement of fish into coastal waters, still results in strong philopatry across the region. Instances of movement among estuaries at this spatial scale were primarily found between adjacent estuaries and were likely attributed to lone migrants utilising inshore coastal currents for movement beyond nearby habitats. Targeting SNP markers in A. butcheri at this continental scale highlighted how neither spatial proximity of estuaries nor black bream's ability to move into coastal waters reflects increased gene flow. Overall, our findings highlight the importance of location-specific management.

Metabolic switching of human myotubes is improved by n-3 fatty acids.

The aim of the present study was to examine whether pretreatment with different fatty acids, as well as the liver X receptor (LXR) agonist T0901317, could modify metabolic switching of human myotubes. The n-3 FA eicosapentaenoic acid (EPA) increased suppressibility, the ability of glucose to suppress FA oxidation. Substrate-regulated flexibility, the ability to increase FA oxidation when changing from a high glucose, low fatty acid condition ("fed") to a high fatty acid, low glucose ("fasted") condition, was increased by EPA and other n-3 FAs. Adaptability, the capacity to increase FA oxidation with increasing FA availability, was enhanced after pretreatment with EPA, linoleic acid (LA), and palmitic acid (PA). T0901317 counteracted the effect of EPA on suppressibility and adaptability, but it did not affect these parameters alone. EPA per se accumulated less, however, EPA, LA, oleic acid, and T0901317 treatment increased the number of lipid droplets (LD) in myotubes. LD volume and intensity, as well as mitochondrial mass, were independent of FA pretreatment. Microarray analysis showed that EPA regulated more genes than the other FAs and that specific pathways involved in carbohydrate metabolism were induced only by EPA. The present study suggests a favorable effect of n-3 FAs on skeletal muscle metabolic switching and glucose utilization.

Parallel electron-hole bilayer conductivity from electronic interface reconstruction.

The perovskite SrTiO3-LaAlO3 structure has advanced to a model system to investigate the rich electronic phenomena arising at polar oxide interfaces. Using first principles calculations and transport measurements we demonstrate that an additional SrTiO3 capping layer prevents atomic reconstruction at the LaAlO3 surface and triggers the electronic reconstruction at a significantly lower LaAlO3 film thickness than for the uncapped systems. Combined theoretical and experimental evidence (from magnetotransport and ultraviolet photoelectron spectroscopy) suggests two spatially separated sheets with electron and hole carriers, that are as close as 1 nm.

Interfacial dielectric layer as an origin of polarization fatigue in ferroelectric capacitors.

Origins of polarization fatigue in ferroelectric capacitors under electric field cycling still remain unclear. Here, we experimentally identify origins of polarization fatigue in ferroelectric PbZr0.52Ti0.48O3 (PZT) thin-film capacitors by investigating their fatigue behaviours and interface structures. The PZT layers are epitaxially grown on SrRuO3-buffered SrTiO3 substrates by a pulsed laser deposition (PLD), and the capacitor top-electrodes are various, including SrRuO3 (SRO) made by in-situ PLD, Pt by in-situ PLD (Pt-inPLD) and ex-situ sputtering (Pt-sputtered). We found that fatigue behaviour of the capacitor is directly related to the top-electrode/PZT interface structure. The Pt-sputtered/PZT/SRO capacitor has a thin defective layer at the top interface and shows early fatigue while the Pt-inPLD/PZT/SRO and SRO/PZT/SRO capacitor have clean top-interfaces and show much more fatigue resistance. The defective dielectric layer at the Pt-sputtered/PZT interface mainly contains carbon contaminants, which form during the capacitor ex-situ fabrication. Removal of this dielectric layer significantly delays the fatigue onset. Our results clearly indicate that dielectric layer at ferroelectric capacitor interfaces is the main origin of polarization fatigue, as previously proposed in the charge injection model.

[Revision arthroplasty of the hip: modularity of neck and metaphyseal components]. / Revisionsendoprothetik der Hüfte: Modularität von Hals- und Metaphysenkomponente.

BACKGROUND: Modular parts in femoral components used for hip arthroplasty are reported to be predilection sites for mechanical failure. The possible benefit of their use is therefore controversial. PATIENTS AND METHOD: We report the outcome of 97 revision hip arthroplasties using a non-cemented femoral component with a modular metaphyseal part and an interchangeable neck (Profemur). The femoral defects treated included Paprosky types I-III. The average follow-up was 5 years (range 3-10 years). DISCUSSION: No mechanical failure of the modular parts and taper connections has been observed so far. The percentage of patients with a balanced leg length increased from 32% preoperative to 65% postoperative. The mean leg length discrepancy could be reduced from 1.4 cm preoperative to 0.5 cm postoperative. A total of 5 re-revisions were required, including 2 cases of infection. The cumulative survival of the implants due to aseptic loosening was 96.5%. CONCLUSION: Because of the achieved results the use of the modular stem investigated in this study can be classified as safe and effective for revision hip arthroplasty. The interchangeable neck proved to be a useful completion of the revision system.

High-T(c) superconducting thin films with composition control on a sub-unit cell level; the effect of the polar nature of the cuprates.

Inspired by the work of Ohtomo and Hwang in 2004, we shed new light on thin films of layered cuprate high-T(c) superconductors (HTS). In principle all HTS materials consist of charged perovskite-like layers which in thin films can lead to polar discontinuities at the interfaces of different materials. The resulting charge redistribution has to occur but we expect it to be far more complex than in the LaAlO(3)/SrTiO(3) system since copper can be multivalent. This makes it hard to predict what will happen in terms of transport or even magnetic properties compared to the 'simple' insulator LaAlO(3). Nevertheless, we point out that the picture of systems of charged layers is important and necessary to fully understand heterostructures of these complex materials.

Hysteretic Characteristics of Pulsed Laser Deposited 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3/ZnO Bilayers.

In the present work, we study the hysteretic behavior in the electric-field-dependent capacitance and the current characteristics of 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 (BCZT)/ZnO bilayers deposited on 0.7 wt % Nb-doped (001)-SrTiO3 (Nb:STO) substrates in a metal-ferroelectric-semiconductor (MFS) configuration. The X-ray diffraction measurements show that the BCZT and ZnO layers are highly oriented along the c-axis and have a single perovskite and wurtzite phases, respectively, whereas high-resolution transmission electron microscopy revealed very sharp Nb:STO/BCZT/ZnO interfaces. The capacitance-electric field ( C- E) characteristics of the bilayers exhibit a memory window of 47 kV/cm and a capacitance decrease of 22%, at a negative bias. The later result is explained by the formation of a depletion region in the ZnO layer. Moreover, an unusual resistive switching (RS) behavior is observed in the BCZT films, where the RS ratio can be 500 times enhanced in the BCZT/ZnO bilayers. The RS enhancement can be understood by the barrier potential profile modulation at the depletion region, in the BCZT/ZnO junction, via ferroelectric polarization switching of the BCZT layer. This work builds a bridge between the hysteretic behavior observed either in the C- E and current-electric field characteristics on a MFS structure.

A robust and versatile mass spectrometry platform for comprehensive assessment of the thiol redox metabolome.

Several diseases are associated with perturbations in redox signaling and aberrant hydrogen sulfide metabolism, and numerous analytical methods exist for the measurement of the sulfur-containing species affected. However, uncertainty remains about their concentrations and speciation in cells/biofluids, perhaps in part due to differences in sample processing and detection principles. Using ultrahigh-performance liquid chromatography in combination with electrospray-ionization tandem mass spectrometry we here outline a specific and sensitive platform for the simultaneous measurement of 12 analytes, including total and free thiols, their disulfides and sulfide in complex biological matrices such as blood, saliva and urine. Total assay run time is < 10 min, enabling high-throughput analysis. Enhanced sensitivity and avoidance of artifactual thiol oxidation is achieved by taking advantage of the rapid reaction of sulfhydryl groups with N-ethylmaleimide. We optimized the analytical procedure for detection and separation conditions, linearity and precision including three stable isotope labelled standards. Its versatility for future more comprehensive coverage of the thiol redox metabolome was demonstrated by implementing additional analytes such as methanethiol, N-acetylcysteine, and coenzyme A. Apparent plasma sulfide concentrations were found to vary substantially with sample pretreatment and nature of the alkylating agent. In addition to protein binding in the form of mixed disulfides (S-thiolation) a significant fraction of aminothiols and sulfide appears to be also non-covalently associated with proteins. Methodological accuracy was tested by comparing the plasma redox status of 10 healthy human volunteers to a well-established protocol optimized for reduced/oxidized glutathione. In a proof-of-principle study a deeper analysis of the thiol redox metabolome including free reduced/oxidized as well as bound thiols and sulfide was performed. Additional determination of acid-labile sulfide/thiols was demonstrated in human blood cells, urine and saliva. Using this simplified mass spectrometry-based workflow the thiol redox metabolome can be determined in samples from clinical and translational studies, providing a novel prognostic/diagnostic platform for patient stratification, drug monitoring, and identification of new therapeutic approaches in redox diseases.

Experimental evidence for anisotropic double exchange interaction driven anisotropic transport in manganite heterostructures.

An anisotropic double exchange interaction driven giant transport anisotropy is demonstrated in a canonic double exchange system of La2/3Sr1/3MnO3 ultrathin films epitaxially grown on NdGaO3 (110) substrates. The oxygen octahedral coupling at the La2/3Sr1/3MnO3/NdGaO3 interface induces a planar anisotropic Mn-O-Mn bond bending, which causes a significant anisotropic overlap of neighboring Mn orbitals. Due to the anisotropic double exchange interaction, it is found that the conductivity of the La2/3Sr1/3MnO3 film is enhanced when current is applied along the in-plane short crystalline axis. However, the anisotropic behavior is absent in the high temperature paramagnetic phase. Our results demonstrate anisotropic transport in the clean limit where phase separation is absent and the role of anisotropic phase percolation can be excluded.

Imaging pulsed laser deposition oxide growth by in situ atomic force microscopy.

To visualize the topography of thin oxide films during growth, thereby enabling to study its growth behavior quasi real-time, we have designed and integrated an atomic force microscope (AFM) in a pulsed laser deposition (PLD) vacuum setup. The AFM scanner and PLD target are integrated in a single support frame, combined with a fast sample transfer method, such that in situ microscopy can be utilized after subsequent deposition pulses. The in situ microscope can be operated from room temperature up to 700 °C and at (process) pressures ranging from the vacuum base pressure of 10-6 mbar up to 1 mbar, typical PLD conditions for the growth of oxide films. The performance of this instrument is demonstrated by resolving unit cell height surface steps and surface topography under typical oxide PLD growth conditions.

Prevalence of mastitis pathogens and their resistance against antimicrobial agents in dairy cows in Brandenburg, Germany.

The primary objective of this study was to determine management practices concerning mastitis in Brandenburg, Germany, the prevalence of mastitis pathogens in dairy cows, and their resistance to selected antimicrobial agents. A further objective was to study the potential effect of parity and stage of lactation on the resistance of Staphylococcus aureus isolates against ampicillin. Milk samples for microbiological culture were collected from 4 groups of clinically healthy cows (first lactation, >1 lactation, >50 d in milk, and >250 d in milk; 8 cows/group) in 80 dairy herds. Resistance of gram-positive pathogens against 6 antimicrobial agents was tested using the broth microdilution method. Mastitis pathogens were isolated from 26.4% of the milk samples. Coagulase-negative staphylococci (CNS, 9.1% of quarters) and Corynebacterium bovis (7.3%) were the pathogens most frequently isolated. Among the major pathogens, Staph. aureus (5.7%) and Streptococcus uberis (1.0%) had the highest prevalence. Streptococcus agalactiae was isolated in samples from 29% of the herds. Although the prevalence of most pathogens was higher in older cows, the prevalence of CNS was higher in primiparous cows. Results of the mastitis control questionnaire showed that cows with clinical mastitis were transferred to a sick cow pen in 70% of the herds. Cephalosporins were the drug of first choice for treatment of clinical mastitis cases followed by fixed combinations of antimicrobial agents, beta-lactamase-resistant penicillins, and penicillin. Most farmers treated cows 3 to 4 times per case. Cloxacillin, alone or in combination, and penicillin were most often used for dry-cow therapy. Antimicrobial resistance of the pathogens was within the range of other reports. Resistance of Staph. aureus to ampicillin increased significantly during the first lactation. Further research is required to determine the factors that lead to the selection of Staph. aureus strains that are resistant to ampicillin during the first lactation.

Quenched Magnon excitations by oxygen sublattice reconstruction in (SrCuO2)n/(SrTiO3)2 superlattices.

The recently discovered structural reconstruction in the cuprate superlattice (SrCuO2)n/(SrTiO3)2 has been investigated across the critical value of n = 5 using resonant inelastic x-ray scattering (RIXS). We find that at the critical value of n, the cuprate layer remains largely in the bulk-like two-dimensional structure with a minority of Cu plaquettes being reconstructed. The partial reconstruction leads to quenching of the magnons starting at the Γ-point due to the minority plaquettes acting as scattering points. Although comparable in relative abundance, the doped charge impurities in electron-doped cuprate superconductors do not show this quenching of magnetic excitations.

[Migrating pulmonary infiltrates due to a foreign body]. / Verspringende longinfiltraten door een corpus alienum.

A 67-year-old man was admitted with a postobstructive pneumonia of the right upper lobe of the lung. Initially neoplasm was considered, but eventually the obstruction proved to be a foreign body, more specifically, a tooth. Two years before, after an episode of pneumonia caused by anaerobic bacteria, he had been advised to have his remaining teeth extracted because of poor dentition. Hereafter the patient experienced several episodes of pneumonia in different lobes, both right and left sided which were due to the migrating foreign body in the bronchial tract. He recovered after bronchoscopic removal.

The effect of dexamethasone on body and organ growth of normal and IGF-II-transgenic mice.

The physiological role of IGF-II remains unclear but there is evidence for a role in postnatal growth, the growth of the thymus and bone homeostasis. Glucocorticoids have many effects that are opposite to the effects of IGF-II such as growth retardation, osteoporosis and thymic involution. We therefore wondered whether IGF-II overexpression in transgenic mice might counteract some of the growth inhibitory effects of the glucocorticoid, dexamethasone (DXM). In a dose-finding study in normal mice, 20 microg DXM/day caused a significant growth delay. The various organs had a different susceptibility to the growth inhibitory effects of DXM. Most affected were thymus and spleen, followed by liver, skeletal muscle and lumbar vertebrae. The weights of the kidney, tibia, and humerus were not significantly diminished. In a second experiment, the effects of DXM in normal and IGF-II-transgenic animals were compared. The IGF-II serum levels in the transgenic animals were more than 40-fold increased compared with control mice and were decreased by 35% in the DXM-treated group. IGF-I serum levels were identical in both mouse strains and rose slightly after DXM administration in controls. Transgenic mice had higher levels of IGF binding protein species of apparent molecular masses of 41.5 kDa, 30 kDa, and 26.5 kDa. DXM reduced the 24 kDa band in both mice strains. In addition it reduced the bands at 38.5 kDa and 26.5 kDa but only in the transgenic animals. The effect of DXM on body growth was similar in normal and IGF-II-transgenic mice. The weight reduction of the various organs caused by DXM was similar in both types of mice except for the skeleton. The weight of the tibia and the humerus were significantly higher in the DXM-treated transgenic mice. In conclusion, we speculate that overexpression of IGF-II in mice partially protects bone from the osteopenic effects of glucocorticoids.