New Insights into the Redox Properties of Pyridinium Appended 1,2-Dithienylcyclopentenes.

The optical and redox properties of a methyl pyridinium appended 1,2-dithienylethene photochromic derivative have been thoroughly investigated. A complex multi-step photo/redox mechanism is proposed for the closed isomer on the ground of spectro-electrochemical and theoretical data. The generated compounds are not stable over the time because of chemical reactions associated to the redox processes and a new dithienylethene derivative incorporating a seven-membered ring has been isolated and characterized.

Unprecedented ON/OFF Ratios in Photoactive Diarylethene-Bisthienylbenzene Molecular Junctions.

Photoactive molecular junctions, based on 4 nm thick diarylethene (DAE) and 5 nm thick bisthienylbenzene (BTB) layers, were fabricated by electrochemical deposition. Total thickness was around 9 nm, that is, above the direct tunneling limit and in the hopping regime. The DAE units were switched between their open and closed forms. The DAE/BTB bilayer structure exhibits new electronic functions combining photoswitching and photorectification. The open form of DAE/BTB shows low conductance and asymmetric I-V curves while the closed form shows symmetric I-V curves and high conductance. More importantly, unprecedented ON/OFF current ratios of over 10 000 at 1 V were reproducibly measured.

Long-Range Charge Transport in Diazonium-Based Single-Molecule Junctions.

Thin layers of cobalt and ruthenium polypyridyl-oligomers with thicknesses between 2 and 8 nm were deposited on gold by electrochemical reduction of diazonium salts. A scanning tunneling microscope was used to create single-molecule junctions (SMJs). The charge transport properties of the Au-[Co(tpy)2]n-Au (n = 1-4) SMJs do not depend markedly on the oligomer length, have an extremely low attenuation factor (ß âˆ¼ 0.19 nm-1), and do not show a thickness-dependent transition between two mechanisms. Resonant charge transport is proposed as the main transport mechanism. The SMJ conductance decreases by 1 order of magnitude upon changing the metal from Co to Ru. In Au-[Ru(tpy)2]n-Au and Au-[Ru(bpy)3]n-Au SMJs, a charge transport transition from direct tunneling to hopping is evidenced by a break in the length-dependent ß-plot. The three different mechanisms observed are a clear molecular signature on transport in SMJs. Most importantly, these results are in good agreement with those obtained on large-area molecular junctions.

Highly Efficient Photoswitch in Diarylethene-Based Molecular Junctions.

Thin layers of diarylethene oligomers (oligo(DAE)) were deposited by electrochemical reduction of a diazonium salt on glassy carbon and gold electrodes. The layers were fully characterized using electrochemistry, XPS, and AFM, and switching between open and closed forms using light was evidenced. Solid-state molecular junctions (MJs), in which a C-AFM tip is used as the top contact, were fabricated with total layer thicknesses fixed at 2-3 nm and 8-9 nm, i.e. below and above the direct tunneling limit. DAE was then photoswitched between its open and closed forms. Oligo(DAE) MJs using the open form of DAE are highly resistive while those with DAE in the closed form are more conductive. ON/OFF ratios of 2-3 and 200-400 were obtained for 3-nm- and 9-nm-thick DAE MJs, respectively.

Catalytic Light-Triggered Reduction Promoted by a Dithienylethene Derivative.

A pyridinium substituted dithienylethene derivative was used for the first time as an efficient photoreducing agent of two different substrates. This reaction exhibits high catalytic yields due to the continuous regeneration of the initial state of the photochromic molecule.

Highly Efficient Long-Range Electron Transport in a Viologen-Based Molecular Junction.

Thin layers of viologen-based oligomers with thicknesses between 3 and 14 nm were deposited on gold electrodes by electrochemical reduction of a diazonium salt, and then a Ti/Au top contact was applied to complete a solid-state molecular junction (MJ). MJs show symmetric J- V curves and highly efficient long-range transport, with an attenuation factor as small as 0.25 nm-1. This is attributed both to the fact that the viologen LUMO energy lies between the energies of the Fermi levels of the two contacts and to strong electronic coupling between molecules and contacts. As a consequence, resonant tunneling is likely to be the dominant transport mechanism within these MJs, but the temperature dependence of the transport properties suggests that activated redox hopping plays a role at high temperature.

Robust Bipolar Light Emission and Charge Transport in Symmetric Molecular Junctions.

Molecular junctions consisting of a Ru(bpy)3 oligomer between conducting carbon contacts exhibit an exponential dependence of junction current on molecular layer thickness (d) similar to that observed for other aromatic devices when d < 4 nm. However, when d > 4 nm, a change in transport mechanism occurs which coincides with light emission in the range of 600-900 nm. Unlike light emission from electrochemical cells or solid-state films containing Ru(bpy)3, emission is bipolar, occurs in vacuum, has rapid rise time (<5 ms), and persists for >10 h. Light emission directly indicates simultaneous hole and electron injection and transport, possibly resonant due to the high electric field present (>3 MV/cm). Transport differs fundamentally from previous tunneling and hopping mechanisms and is a clear "molecular signature" relating molecular structure to electronic behavior.

Control of Rectification in Molecular Junctions: Contact Effects and Molecular Signature.

Thin layers of oligomers with thickness between 7 and 9 nm were deposited on flat gold electrode surfaces by electrochemical reduction of diazonium reagents, then a Ti(2 nm)/Au top contact was applied to complete a solid-state molecular junction. The molecular layers investigated included donor molecules with relatively high energy HOMO, molecules with high HOMO-LUMO gaps and acceptor molecules with low energy LUMO and terminal alkyl chain. Using an oligo(bisthienylbenzene) based layer, a molecule whose HOMO energy level in a vacuum is close to the Fermi level of the gold bottom electrode, the devices exhibit robust and highly reproducible rectification ratios above 1000 at low voltage (2.7 V). Higher current is observed when the bottom gold electrode is biased positively. When the molecular layer is based on a molecule with a high HOMO-LUMO gap, i.e., tetrafluorobenzene, no rectification is observed, while the direction of rectification is reversed if the molecular layer consists of naphtalene diimides having low LUMO energy level. Rectification persisted at low temperature (7 K), and was activationless between 7 and 100 K. The results show that rectification is induced by the asymmetric contact but is also directly affected by orbital energies of the molecular layer. A "molecular signature" on transport through layers with thicknesses above those used when direct tunneling dominates is thus clearly observed, and the rectification mechanism is discussed in terms of Fermi level pinning and electronic coupling between molecules and contacts.

Efficient Photoswitch System Combining a Dimethyldihydropyrene Pyridinium Core and Ruthenium(II) Bis-Terpyridine Entities.

Terpyridine ruthenium complexes linked to the dimethyldihydropyrene (DHP) photochromic unit have been synthesized and fully characterized by cyclic voltammetry and absorption and emission spectroscopy. The study of the photoisomerization reaction undergone by the DHP motif under visible light irradiation is reported. In comparison to previous work, the introduction of an electron-withdrawing pyridinium spacer between the chelating terpyridine unit and the DHP skeleton has considerably tuned the photochromic properties of the free ligands and their corresponding complexes in term of time response and photoreversibility. A rapid, reversible, and complete conversion between the closed and the open forms has been clearly evidenced under visible light irradiation. Only slight perturbations have been induced by the presence of ruthenium centers. Experimental findings and their interpretation have been supported by theoretical calculations.

Unprecedented Self-Organized Monolayer of a Ru(II) Complex by Diazonium Electroreduction.

A new heteroleptic polypyridyle Ru(II) complex was synthesized and deposited on surface by the diazonium electroreduction process. It yields to the covalent grafting of a monolayer. The functionalized surface was characterized by XPS, electrochemistry, AFM, and STM. A precise organization of the molecules within the monolayer is observed with parallel linear stripes separated by a distance of 3.8 nm corresponding to the lateral size of the molecule. Such organization suggests a strong cooperative process in the deposition process. This strategy is an original way to obtain well-controlled and stable functionalized surfaces for potential applications related to the photophysical properties of the grafted chromophore. As an exciting result, it is the first example of a self-organized monolayer (SOM) obtained using diazonium electroreduction.

A multi-addressable switch based on the dimethyldihydropyrene photochrome with remarkable proton-triggered photo-opening efficiency.

A series of photochromic derivatives based on the trans-10b,10c-dimethyl-10b,10c-dihydropyrene (DHP, "closed form") skeleton has been synthesized and their photoisomerization leading to the corresponding cyclophanediene (CPD, "open form") isomers has been investigated by UV/Vis and (1) H NMR spectroscopies. Substitution of the DHP core with electron-withdrawing pyridinium groups was found to have major effects on the photoisomerization efficiency, the most remarkable examples being to enhance the quantum yield of the opening reaction and to allow fast and quantitative conversions at much lower radiant energies. This effect was rationalized by theoretical calculations. We also show that the reverse reaction, that is, going from the open form to the closed form, can be electrochemically triggered by oxidation of the CPD unit and that the photo-opening properties of pyridine-substituted DHPs can be efficiently tuned by protonation, the system behaving as a multi-addressable molecular switch. These multi-addressable photochromes show promise for the development of responsive materials.

One-step vs stepwise immobilization of 1-D coordination-based Rh-Rh molecular wires on gold surfaces.

Reaction of dimeric [Rh(II)(2)(phen)(2)(µ-OAc)(2)(MeCN)(2)](BF(4))(2) (phen =1,10-phenanthroline) with pyrazine (pz) in a 1:2 ratio leads to the new 1-D metal-metal-bonded coordination oligomer {[Rh(II)(2)(phen)(2)(µ-OAc)(2)(pz)](BF(4))(2)}(n) (Rh-Rhpz)(n) (1), where each Rh atom of the dimeric unit (Rh-Rh) is coordinated in the equatorial plane to a nitrogen atom of a rigid and linear bifunctionalized organic linker (pz). Single X-ray diffraction analysis reveals the 1-D straight oligomeric chain structure (molecular wire, MW) consists of alternating (Rh-Rh) units and pz linking ligands with free BF(4)(-) as counteranions, and each metal center has a slightly distorted octahedral arrangement. The presence of accessible labile MeCN groups on both ends of these MWs ("free ends") enables functionalization of a 4-mercaptopyridine-gold coordinating platform (Au/MP) to form in one step a layer of coordination oligomer (Au/MP(Rh-Rhpz)(n); n ≈ 50). Furthermore (Rh-Rhpz)(n) (n = 1-6) MWs were grafted to Au/MP surfaces by a conventional step-by-step assembly construction involving coordination reactions between the Rh dimer ([Rh(2)(phen)(2)(µ-OAc)(2)(MeCN)(2)](BF(4))(2) (2)) and pz. A detailed physicochemical study (UV-vis, RAIR, QCM-D, ellipsometry, contact angle measurements, as well as impedance spectroscopy and cyclic voltammetry) has been made during both assembly methods to characterize the resulting surface-anchored coordination molecular wire (CMW) layers (Au/MP(Rh-Rhpz)(n)). The results indicate that the immobilized molecular assemblies (MAs) were successfully fabricated using both methods of assembly. The efficiency of the two methods is discussed.

Electron transfer across modular oligo-p-phenylene bridges in Ru(bpy)2(bpy-ph(n)-DQ)4+ (n = 1-5) dyads. Unusual effects of bridge elongation.

A series of dyads of general formula Ru(bpy)(2)(bpy-ph(n)-DQ)(4+) (n = 1-5), based on a Ru(II) polypyridine unit as photoexcitable donor, a set of oligo-p-phenylene bridges with 1-5 modular units, and a cyclo-diquaternarized 2,2'-bipyridine (DQ(2+)) as electron acceptor unit, have been synthesized. Their spectroscopic and photophysical properties have been investigated in CH(3)CN and CH(2)Cl(2) by time-resolved emission and absorption spectroscopy in the nanosecond and picosecond time scale. The experimental study has also been complemented with a computational investigation carried out on the whole series of dyads. The absorption spectra of the dyads show new spectroscopic transitions, in addition to those characteristic of the donor, bridge, and acceptor fragments. DFT calculations suggest the assignment of such bands as bridge-to-acceptor (π ph(n)) → (π* DQ) charge-transfer transitions. This assignment is consistent with the solvatochromic and spectroelectrochemical behavior of the new bands. For all the dyads at room temperature in fluid solution, the typical (3)MLCT luminescence of the Ru(II) polypyridine unit is strongly (>90%) quenched, supporting the occurrence of an efficient intramolecular photoinduced electron transfer. The study has revealed, however, that the photophysical mechanism is actually more complex than presumed on the basis of a simple photoinduced electron-transfer scheme. For n = 1, very fast (few picoseconds) photoinduced electron transfer from the MLCT state localized on the substituted bpy ligand to the DQ unit has been observed, followed by slower interligand hopping and charge recombination. For n = 2-5, MLCT excited-state quenching takes place without transient detection of charge-separated product, indicating that charge recombination is faster than charge separation. This behavior can be rationalized in terms of the superexchange couplings expected through this type of bridges for the two processes. The kinetics of MLCT quenching in the dyads with n = 1-5 does not follow the usual exponential falloff with bridge length: after a regular decrease for n = 1-3, the rate constants become almost insensitive to bridge length for n = 3-5. The rationale of this uncommon behavior, as suggested by DFT calculations, lies in a switch in the MLCT quenching mechanism with increasing bridge length, from oxidative quenching by the DQ acceptor to reductive quenching by the bridge.

Visualization and Comprehension of Electronic and Topographic Contrasts on Cooperatively Switched Diarylethene-Bridged Ditopic Ligand.

Diarylethene is a prototypical molecular switch that can be reversibly photoisomerized between its open and closed forms. Ligands bpy-DAE-bpy, consisting of a phenyl-diarylethene-phenyl (DAE) central core and bipyridine (bpy) terminal substituents, are able to self-organize. They are investigated by scanning tunneling microscopy at the solid-liquid interface. Upon light irradiation, cooperative photochromic switching of the ligands is recognized down to the submolecular level. The closed isomers show different electron density of states (DOS) contrasts, attributed to the HOMO or LUMO molecular orbitals observed. More importantly, the LUMO images show remarkable differences between the open and closed isomers, attributed to combined topographic and electronic contrasts mainly on the DAE moieties. The electronic contrasts from multiple HOMO or LUMO distributions, combined with topographic distortion of the open or closed DAE, are interpreted by density functional theory (DFT) calculations.

Towards new molecular photocatalysts for CO2 reduction: photo-induced electron transfer versus CO dissociation within [Os(NN)(CO)2Cl2] Complexes.

Optical excitation in the visible region of trans-(Cl)-[Os(bpy)(CO)(2)Cl(2)] (bpy=2,2'-bipyridine; C1) and trans-(Cl)-[Os(dmbpy)(CO)(2)Cl(2)] (dmbpy=4,4'-dimethyl 2,2'-bipyridine; C2) is known to induce the common CO dissociation reaction. However, the quantum yield of the reactions is less than 0.15, although C1 and C2 display pronounced photoluminescence in the visible region at room temperature with a lifetime of few tens of nanoseconds. Taking into account the characteristics of their emitting state, we have investigated the capability of C1 and C2 to act as a photosensitiser in redox reactions in different solvents (MeCN, PrCN and DMF). The efficient oxidation and reduction of both complexes under continuous irradiation in the presence of a sacrificial electron acceptor or donor is reported here. The photo-induced transformations and the nature of the resulting compounds were analysed by UV/Vis and IR spectroscopies and cyclic voltammetry. Photo-induced oxidation of C1 and C2 leads to the corresponding monocarbonyl oxidised species, whereas photo-induced reduction under argon leads mainly to the formation of the corresponding Os-bonded molecular wires P1 and P2 after exchange of two electrons associated with the loss of two chloro ligands. The chemical yield of the latter reaction (around 65%) becomes quantitative by adding [Ru(bpy)(3)](2+) as an external redox photosensitiser. This behaviour has been used to photocatalyse the two electron, two proton conversion of CO(2) to CO. Turnover numbers (TON) of 11.5 and 19.5 have been obtained respectively for C1 and C2 after 4.5 h of irradiation under CO(2) in DMF with triethanolamine as the electron donor. TON can be slightly increased by adding [Ru(bpy)(3)](2+) to the solution.

Structural characterization of metal-metal bonded polymer [Ru(L)(CO)(2)](n) (L = 2,2'-bipyridine) in the solid state using high-resolution NMR and DFT chemical shift calculations.

The metal bonded ruthenium polymer [Ru(0)(bpy)(CO)(2)](n) (bpy = 2,2'-bipyridine) is known to be a very promising and efficient solid material for catalysis applications, such as carbon dioxide electroreduction in pure aqueous media and the water-gas shift reaction. It also exhibits potential application for molecular electronics as a conductive molecular wire. The insolubility and relative air-sensitivity of [Ru(0)(bpy)(CO)(2)](n) as well as the lack of monocrystals make its structural characterization very challenging. A first approach to determine the structure of this polymer has been obtained by ab initio X-ray powder diffraction, based on the known X-ray structure of [Ru(CO)(4)](n). In order to refine this structure, a non-conventional solid-state NMR study was performed. The results of this study are presented here. The comparison of high-resolution solid-state (13)C NMR spectra of the polymer with those of the corresponding monomeric [Ru(bpy)(CO)(2)Cl(2)] or dimeric [Ru(bpy)(CO)(2)Cl](2) precursor complexes has shown a clear shift and splitting of carbonyl ligand resonances, which turns out to be linearly correlated with the redox state of the Ru (ii, i or 0, respectively). Bipyridine resonances are also affected but in a non-trivial way. Finally, in the case of the dimer, it was found that the CO peak splitting (2.7 ppm) contains structural information, e.g. the ligand staggering angle. Based on DFT chemical shift calculations on corresponding model molecules (n = 1-2), all the described experimental observations could be reproduced. Moreover, upon extending these calculations to models of increasing length (n = 3-5), it turns out that information about the staggering angle between successive ligands is actually retained in the CO NMR computed peak splitting. Turning back to experiments, the CO broad signal measured for the wire could be decomposed into a major component (at 214.9 ppm) assigned to the internal CO ligands, and a minor doublet component (216.9 and 218.1 ppm) whose splitting (2.8 ppm) contains the staggering angle information. Finally, from the relative integrals of these three components, expected to be in the ratio 1 : 1 : n-2, it was possible to tentatively estimate the length n of the polymetallic wire (n = 7).

Correction: Multi-functional switches of ditopic ligands with azobenzene central bridges at a molecular scale.

Correction for 'Multi-functional switches of ditopic ligands with azobenzene central bridges at a molecular scale' by Imen Hnid et al., Nanoscale, 2019, 11, 23042-23048.

All Visible Light Switch Based on the Dimethyldihydropyrene Photochromic Core.

Two photoswitchable compounds that can operate under visible light irradiation are prepared and investigated using spectroscopic and computational studies. These all-visible systems are based on the dimethyldihydropyrene (DHP)/cyclophanediene (CPD) photochromic couple connected either to a bipyridine (bpy) unit or to a (tris(bpy)ruthenium(II)) complex through a pyridinium bridge. In these compounds, the DHP to CPD isomerization and the reverse CPD to DHP conversion can be triggered by illumination with red (>630 nm) and blue (460 nm) lights, respectively. The unambiguous and reversible response of these systems triggered by visible light make them potential candidates for biological purposes and electronic devices.

Soluble redox-active polymetallic chains [{Ru0(CO)(L)(bpy)}m](n) (bpy = 2,2'-bipyridine, L = PrCN, Cl-; m = 0, -1): electrosynthesis and characterization.

Electrochemical and spectroelectrochemical techniques were employed to study in detail the formation and so far unreported spectroscopic properties of soluble electroactive molecular chains with nonbridged metal-metal backbones, namely, [{Ru(0)(CO)(PrCN)(bpy)}(m)](n) (m = 0, -1) and [{Ru(0)(CO)(bpy)Cl}(m)](n) (m = -1, -2; bpy = 2,2'-bipyridine). The precursors cis-(Cl)-[Ru(II)(CO)(MeCN)(bpy)Cl(2)] (in PrCN) and mer-[Ru(II)(CO)(bpy)Cl(3)](-) (in tetrahydrofuran (THF) and PrCN) undergo one-electron reductions to reactive radicals [Ru(II)(CO)(MeCN)(bpy(*-))Cl(2)](-) and [Ru(II)(CO)(bpy(*-))Cl(3)](2-), respectively. Both [bpy(*-)]-containing species readily electropolymerize on concomitant dissociation of two chloride ligands and consumption of a second electron. Along this path, mer-to-fac isomerization of the bpy-reduced trichlorido complex (supported by density functional theory calculations) and a concentration-dependent oligomerization process contribute to the complex reactivity pattern. In situ spectroelectrochemistry (IR, UV/vis) has revealed that the charged polymer [{Ru(0)(CO)(bpy)Cl}(-)](n) is stable in THF, but in PrCN it converts readily to [Ru(0)(CO)(PrCN)(bpy)](n). An excess of chloride ions retards this substitution at low temperatures. Both polymetallic chains are completely soluble in the electrolyte solution and can be reduced reversibly to the corresponding [bpy(*-)]-containing species.

One-Dimensional Double Wires and Two-Dimensional Mobile Grids: Cobalt/Bipyridine Coordination Networks at the Solid/Liquid Interface.

Various architectures have been generated and observed by STM at a solid/liquid interface resulting from an in situ chemical reaction between the bipyridine terminal groups of a ditopic ligand and Co(II) ions. Large monodomains of one-dimensional (1D) double wires are formed by Co(II)/ligand coordination, with polymer lengths as long as 150 nm. The polymers are organized as parallel wires 8 nm apart, and the voids between wires are occupied by solvent molecules. Two-dimensional (2D) grids, showing high surface mobility, coexist with the wires. The wires are formed from linear chain motifs where each cobalt center is bonded to two bipyridines. 2D grids are generated from a bifurcation node where one cobalt bonds to three bipyridines. Surface reconstruction of the grids and of the 1D wires was observed under the STM tip. As an exciting result, analysis of these movements strongly indicates surface reactions at the solid/liquid interface.