Fate of Antioxidative Compounds within Bark during Storage: A Case of Norway Spruce Logs.

Softwood bark is an important by-product of forest industry. Currently, bark is under-utilized and mainly directed for energy production, although it can be extracted with hot water to obtain compounds for value-added use. In Norway spruce (Picea abies [L.] Karst.) bark, condensed tannins and stilbene glycosides are among the compounds that comprise majority of the antioxidative extractives. For developing feasible production chain for softwood bark extractives, knowledge on raw material quality is critical. This study examined the fate of spruce bark tannins and stilbenes during storage treatment with two seasonal replications (i.e., during winter and summer). In the experiment, mature logs were harvested and stored outside. During six-month-storage periods, samples were periodically collected for chemical analysis from both inner and outer bark layers. Additionally, bark extractives were analyzed for antioxidative activities by FRAP, ORAC, and H2O2 scavenging assays. According to the results, stilbenes rapidly degraded during storage, whereas tannins were more stable: only 5-7% of the original stilbene amount and ca. 30-50% of the original amount of condensed tannins were found after 24-week-storage. Summer conditions led to the faster modification of bark chemistry than winter conditions. Changes in antioxidative activity were less pronounced than those of analyzed chemical compounds, indicating that the derivatives of the compounds contribute to the antioxidative activity. The results of the assays showed that, on average, ca. 27% of the original antioxidative capacity remained 24 weeks after the onset of the storage treatment, while a large variation (2-95% of the original capacity remaining) was found between assays, seasons, and bark layers. Inner bark preserved its activities longer than outer bark, and intact bark attached to timber is expected to maintain its activities longer than a debarked one. Thus, to ensure prolonged quality, no debarking before storage is suggested: outer bark protects the inner bark, and debarking enhances the degradation.

Structural and Thermal Analysis of Softwood Lignins from a Pressurized Hot Water Extraction Biorefinery Process and Modified Derivatives.

In this work we have analyzed the pine and spruce softwood lignin fraction recovered from a novel pressurized hot water extraction pilot process. The lignin structure was characterized using multiple NMR techniques and the thermal properties were analyzed using thermal gravimetric analysis. Acetylated and selectively methylated derivatives were prepared, and their structure and properties were analyzed and compared to the unmodified lignin. The lignin had relatively high molar weight and low PDI values and even less polydisperse fractions could be obtained by fractionation based on solubility in i-PrOH. Condensation, especially at the 5-position, was detected in this sulphur-free technical lignin, which had been enriched with carbon compared to the milled wood lignin (MWL) sample of the same wood chips. An increase in phenolic and carboxylic groups was also detected, which makes the lignin accessible to chemical modification. The lignin was determined to be thermally stable up to (273⁻302 °C) based on its Tdst 95% value. Due to the thermal stability, low polydispersity, and possibility to tailor its chemical properties by modification of its hydroxyl groups, possible application areas for the lignin could be in polymeric blends, composites or in resins.

Transformations and antioxidative activities of lignans and stilbenes at high temperatures.

Thermal transformations of polyphenols from the lignan and stilbene families were investigated at temperatures ranging from 200 °C to 250 °C, in polyethylene glycol (PEG-400), dimethylformamide (DMF) and in sunflower oil (SO). The polyphenols showed varying degrees of thermal stabilities and in some cases intramolecular transformations were observed. The formed products were isolated and characterized. Oligomerization of the polyphenols at thermo-oxidative conditions was also investigated. Finally, the antioxidative activity of the polyphenols against thermo-oxidative degradation α-linoleic acid was investigated at 200 °C. The results suggested that the studied substrates retained their antioxidative properties at elevated temperatures, with stilbenes showing most efficient protection against thermo-oxidative degradation of polyunsaturated fatty acids.

O2 as initiator of autocatalytic degradation of hemicelluloses and monosaccharides in hydrothermal treatment of spruce.

The influence of oxygen (0-50 bar) on the molar mass and composition of hemicelluloses after hydrothermal treatment of spruce chips was studied in a batch reactor setup at 130 °C-160 °C. Purified galactoglucomannan was studied as a reference. The dissolved oxygen enhanced significantly the depolymerization of hemicelluloses from over 15,000 g/mol to 180 g/mol (monomers) as well as promoted acids formation from the monosaccharides. About 2-3 times faster depolymerization was observed already with rather low amounts of oxygen (2-8 bar), while the kinetics of depolymerization was significantly slower in inert atmosphere. The decrease in pH from neutral to as low as 2.5 lead to an autocatalytic effect on the polysaccharide hydrolysis and the consecutive reactions of monosaccharides. The results emphasize the importance of performing hydrothermal treatment under inert atmosphere if large polymeric hemicellulsoses are desired or if monosaccharides are targeted in hydrolysis of hemicelluloses. If autocatalysis begins, it is difficult to stop.

Reductive Catalytic Depolymerization of Semi-industrial Wood-Based Lignin.

The current work studies the reductive catalytic depolymerization (RCD) of lignin from a novel semi-industrial process. The aim was to obtain aromatic mono-, di-, tri-, and tetramers for further valorization. The substrate and products were characterized by multiple analytical methods, including high pressure size-exclusion chromatography (HPSEC), gas chromatography-mass spectrometry, GC-flame ionization detector (FID), GC-FID/thermal conductivity detector (TCD), and NMR. The RCD was studied by exploring the influence of different parameters, such as lignin solubility, reaction time, hydrogen pressure, reaction temperature, pH, type and loading of the catalyst, as well as type and composition of the organic/aqueous solvent. The results show that an elevated temperature, a redox catalyst, and a hydrogen atmosphere are essential for the depolymerization and stability of the products, while the reaction medium also plays an important role. The highest obtained mono- to tetramers yield was 98% and mono- to dimers yield over 85% in the liquid phase products. The reaction mechanisms influenced the structure of the aliphatic chain in the monomers, but left the phenolic structure along with the methoxy groups largely unaltered. The current work contributes to the development and debottlenecking of the novel and sustainable overall process, which utilizes efficiently all the fractions of wood, in line with the principles of green engineering and chemistry.

Cytotoxic activity of some glycoconjugates including saponins and anthracyclines.

Many different glycoconjugates, including saponins (e.g., hellebrin) and anthracyclines (e.g., doxorubicin), are known to display cytotoxic activities. In recent work, we have developed synthetic protocols for the synthesis of various glycoconjugates, focusing on glycosylation methods for different classes of biomolecules. Simultaneously a number of saponins and anthracyclines have been generated. In this note, the cytotoxic activities of these synthesized compounds are briefly addressed.

Stereo- and regioselective glycosylation of 4-deoxy-ε-rhodomycinone.

A method for the glycosylation of anthracyclines featuring benzoylated imidate donors has been developed and utilized in the synthesis of glycosylated 4-deoxy-ε-rhodomycinone derivatives. Due to its high efficiency, regioselectivity, stereoselectivity, and operational simplicity, the method should prove valuable to researchers working with glycosylation of tetracyclic compounds.