Termites manipulate moisture content of wood to maximize foraging resources.

Animals use cues to find their food, in microhabitats within their physiological tolerances. Termites build and modify their microhabitat, to transform hostile environments into benign ones, which raises questions about the relative importance of cues. Termites are desiccation intolerant and foraging termites are attracted to water, so most research has considered moisture to be a cue. However, termites can also transport water to food, and so moisture may play other roles than previously considered. To examine the role of moisture, we compared Coptotermes acinaciformis termite foraging decisions in laboratory experiments when they were offered dry and moist wood, with and without load. Without load, termites preferred moist wood and ate it without any building, whereas they moistened dry wood after wrapping it in a layer of clay. For the 'With load' units, termites substituted some of the wood for load-bearing clay walls, and kept the wood drier than on the unloaded units. As drier wood has higher compressive strength and higher rigidity, it allows more of the wood to be consumed. These results suggest that moisture plays a more important role in termite ecology than previously thought. Termites manipulate the moisture content according to the situational context and use it for multiple purposes: increased moisture levels soften the fibre, which facilitates foraging, yet keeping the wood dry provides higher structural stability against buckling which is especially important when foraging on wood under load.

Cryptic termites avoid predatory ants by eavesdropping on vibrational cues from their footsteps.

Eavesdropping has evolved in many predator-prey relationships. Communication signals of social species may be particularly vulnerable to eavesdropping, such as pheromones produced by ants, which are predators of termites. Termites communicate mostly by way of substrate-borne vibrations, which suggest they may be able to eavesdrop, using two possible mechanisms: ant chemicals or ant vibrations. We observed termites foraging within millimetres of ants in the field, suggesting the evolution of specialised detection behaviours. We found the termite Coptotermes acinaciformis detected their major predator, the ant Iridomyrmex purpureus, through thin wood using only vibrational cues from walking, and not chemical signals. Comparison of 16 termite and ant species found the ants-walking signals were up to 100 times higher than those of termites. Eavesdropping on passive walking signals explains the predator detection and foraging behaviours in this ancient relationship, which may be applicable to many other predator-prey relationships.

Proximity to the water surface markedly enhances the force production on underwater flapping wings.

The potential application of flapping wings in micro-aerial vehicles is gaining interest due to their ability to generate high lift even in confined spaces. Most studies in the past have investigated hovering wings as well as those flapping near solid surfaces. However, the presence of surface tension at the water-air interface and the ability of the water surface to move might differentiate its response to the proximity of wings, compared to that of solid surfaces. Motivated by underwater, amphibian robots and several underwater experimental studies on flapping wings, our study investigated the effects of the proximity of flapping wings to the water surface at low Reynolds numbers (Re = 3400). Experiments were performed on a rectangular wing in a water tank with prescribed flapping kinematics and the aerodynamic forces were measured. The effects of surface proximity on the wing in its both upright and inverted orientations were studied. Broadly, the mean lift and drag coefficients in both orientations decreased significantly (by up to 60%) as the distance from the water surface was increased. In the case of the upright orientation, the mean lift coefficient was slightly decreased very close to the water surface with its peak being observed at the normalized clearance of [Formula: see text]. Overall, the study revealed an enhancement in the aerodynamic forces closer to the water surface.

Low radiodensity µCT scans to reveal detailed morphology of the termite leg and its subgenual organ.

Termites sense tiny substrate-borne vibrations through subgenual organs (SGOs) located within their legs' tibiae. Little is known about the SGOs' structure and physical properties. We applied high-resolution (voxel size 0.45 µm) micro-computed tomography (µCT) to Australian termites, Coptotermes lacteus and Nasutitermes exitiosus (Hill) to test two staining techniques. We compared the effectiveness of a single stain of Lugol's iodine solution (LS) to LS followed by Phosphotungstic acid (PTA) solutions (1% and 2%). We then present results of a soldier of Nasutitermes exitiosus combining µCT with LS + 2%PTS stains and scanning electron microscopy to exemplify the visualisation of their SGOs. The termite's SGO due to its approximately oval shape was shown to have a maximum diameter of 60 µm and a minimum of 48 µm, covering 60 ± 4% of the leg's cross-section and 90.4 ± 5% of the residual haemolymph channel. Additionally, the leg and residual haemolymph channel cross-sectional area decreased around the SGO by 33% and 73%, respectively. We hypothesise that this change in cross-sectional area amplifies the vibrations for the SGO. Since SGOs are directly connected to the cuticle, their mechanical properties and the geometric details identified here may enable new approaches to determine how termites sense micro-vibrations.

A numerical study of fish adaption behaviors in complex environments with a deep reinforcement learning and immersed boundary-lattice Boltzmann method.

Fish adaption behaviors in complex environments are of great importance in improving the performance of underwater vehicles. This work presents a numerical study of the adaption behaviors of self-propelled fish in complex environments by developing a numerical framework of deep learning and immersed boundary-lattice Boltzmann method (IB-LBM). In this framework, the fish swimming in a viscous incompressible flow is simulated with an IB-LBM which is validated by conducting two benchmark problems including a uniform flow over a stationary cylinder and a self-propelled anguilliform swimming in a quiescent flow. Furthermore, a deep recurrent Q-network (DRQN) is incorporated with the IB-LBM to train the fish model to adapt its motion to optimally achieve a specific task, such as prey capture, rheotaxis and Kármán gaiting. Compared to existing learning models for fish, this work incorporates the fish position, velocity and acceleration into the state space in the DRQN; and it considers the amplitude and frequency action spaces as well as the historical effects. This framework makes use of the high computational efficiency of the IB-LBM which is of crucial importance for the effective coupling with learning algorithms. Applications of the proposed numerical framework in point-to-point swimming in quiescent flow and position holding both in a uniform stream and a Kármán vortex street demonstrate the strategies used to adapt to different situations.

Submillimetre mechanistic designs of termite-built structures.

Termites inhabit complex underground mounds of intricate stigmergic labyrinthine designs with multiple functions as nursery, food storage and refuge, while maintaining a homeostatic microclimate. Past research studied termite building activities rather than the actual material structure. Yet, prior to understanding how multi-functionality shaped termite building, a thorough grasp of submillimetre mechanistic architecture of mounds is required. Here, we identify for Nasutitermes exitiosus via granulometry and Fourier transform infrared spectroscopy analysis, preferential particle sizes related to coarse silts and unknown mixtures of organic/inorganic components. High-resolution micro-computed X-ray tomography and microindentation tests reveal wall patterns of filigree laminated layers and sub-millimetre porosity wrapped around a coarse-grained inner scaffold. The scaffold geometry, which is designed of a lignin-based composite and densely biocementitious stercoral mortar, resembles that of trabecula cancellous bones. Fractal dimension estimates indicate multi-scaled porosity, important for enhanced evaporative cooling and structural stability. The indentation moduli increase from the outer to the inner wall parts to values higher than those found in loose clays and which exceed locally the properties of anthropogenic cementitious materials. Termites engineer intricately layered biocementitious composites of high elasticity. The multiple-scales and porosity of the structure indicate a potential to pioneer bio-architected lightweight and high-strength materials.

Revisiting stigmergy in light of multi-functional, biogenic, termite structures as communication channel.

Termite mounds are fascinating because of their intriguing composition of numerous geometric shapes and materials. However, little is known about these structures, or of their functionalities. Most research has been on the basic composition of mounds compared with surrounding soils. There has been some targeted research on the thermoregulation and ventilation of the mounds of a few species of fungi-growing termites, which has generated considerable interest from human architecture. Otherwise, research on termite mounds has been scattered, with little work on their explicit properties. This review is focused on how termites design and build functional structures as nest, nursery and food storage; for thermoregulation and climatisation; as defence, shelter and refuge; as a foraging tool or building material; and for colony communication, either as in indirect communication (stigmergy) or as an information channel essential for direct communication through vibrations (biotremology). Our analysis shows that systematic research is required to study the properties of these structures such as porosity and material composition. High resolution computer tomography in combination with nonlinear dynamics and methods from computational intelligence may provide breakthroughs in unveiling the secrets of termite behaviour and their mounds. In particular, the examination of dynamic and wave propagation properties of termite-built structures in combination with a detailed signal analysis of termite activities is required to better understand the interplay between termites and their nest as superorganism. How termite structures serve as defence in the form of disguising acoustic and vibration signals from detection by predators, and what role local and global vibration synchronisation plays for building are open questions that need to be addressed to provide insights into how termites utilise materials to thrive in a world of predators and competitors.

Termites eavesdrop to avoid competitors.

Competition exclusion, when a single species dominates resources due to superior competitiveness, is seldom observed in nature. Termites compete for resources with deadly consequences, yet more than one species can be found feeding in the same wooden resource. This is especially surprising when drywood species, with colonies of a few hundred, are found cohabiting with subterranean species, with colonies of millions. Termites communicate vibro-acoustically and, as these signals can travel over long distances, they are vulnerable to eavesdropping. We investigated whether drywood termites could eavesdrop on vibration cues from subterranean species. We show, using choice experiments and recordings, that the drywood termite Cryptotermes secundus can distinguish its own species from the dominant competitor in the environment, the subterranean termite Coptotermes acinaciformis. The drywood termite was attracted to its own vibration cues, but was repelled by those of the subterranean species. This response increased with decreasing wood size, corresponding with both increased risk and strength of the cue. The drywood termites appear to avoid confrontation by eavesdropping on the subterranean termites; these results provide further evidence that vibro-acoustic cues are important for termite sensory perception and communication.

Dynamic characteristics of a deformable capsule in a simple shear flow.

The dynamic characteristics of a two-dimensional deformable capsule in a simple shear flow are studied with an immersed boundary-lattice Boltzmann method. Simulations are conducted by varying the Reynolds number (Re) from 0.0125 to 2000 and the dimensionless shear rate (G) from 0.001 to 0.5. The G-Re plane can be divided into four regions according to the deformation dependence on the parameters considered: viscous dominant, inertia dominant, transitional, and anomalous regions. There are four typical dynamic behaviors over the G-Re plane: steady deformation, prerupture state, quasisteady deformation, and continuous elongation. Analysis indicates that the pressure distribution and its variations due to the interplay of the fluid inertia force, the viscous shear stress, and the membrane elastic force determines the complex behaviors of the capsule. The effects of the bending rigidity and the internal-to-external viscosity ratio on the dynamics of the capsule are further studied. It is found that the capsule experiences smaller deformation when the higher bending rigidity is included, and the low bending rigidity does not have a remarkable influence on the capsule deformation. The capsule normally experiences smaller deformation due to the increase of the internal-to-external viscosity ratio.

Key physical wood properties in termite foraging decisions.

As eusocial and wood-dwelling insects, termites have been shown to use vibrations to assess their food, to eavesdrop on competitors and predators and to warn nest-mates. Bioassay choice experiments used to determine food preferences in animals often consider single factors only but foraging decisions can be influenced by multiple factors such as the quantity and quality of the food and the wood as a medium for communication. A statistical analysis framework is developed here to design a single bioassay experiment to study multifactorial foraging choice ( Pinus radiata) in the basal Australian termite species Coptotermes ( C.) acinaciformis (Isoptera: Rhinotermitidae). By employing a correlation analysis, 17 measured physical properties of 1417 Pinus radiata veneer discs were reduced to five key material properties: density, moisture absorption, early wood content, first resonance frequency and damping. By applying a fuzzy c-means clustering technique, these veneer discs were optimally paired for treatment and control trials to study food preference by termites based on these five key material properties. A multifactorial analysis of variance was compared to a permutation analysis of the results indicating for the first time that C. acinaciformis takes into account multiple factors when making foraging decisions. C. acinaciformis prefer denser wood with large early wood content, preferably humid and highly damped. Results presented here have practical implications for food choice experiments and for studies concerned with communication in termites as well as their ecology and coevolution with trees as their major food source.

Termites live in a material world: exploration of their ability to differentiate between food sources.

Drywood termites are able to assess wood size using vibratory signals, although the exact mechanism behind this assessment ability is not known. Important vibratory characteristics such as the modal frequencies of a wooden block depend on its geometry and boundary conditions; however, they are also dependent on the material characteristics of the block, such as mass, density and internal damping. We report here on choice experiments that tested the ability of the drywood termite Cryptotermes secundus to assess wooden block size using a solid wooden block paired with a composite block, the latter made of either wood and aluminium or wood and rubber. Each composite block was constructed to match mass or low-frequency vibratory modes (i.e. fundamental frequency) of the solid wooden block. The termites always chose the blocks with more wood; they moved to the solid wooden blocks usually within a day and then tunnelled further into the solid wooden block by the end of the experiment. Termites offered composite blocks of wood and rubber matched for mass were the slowest to show a preference for the solid wooden block and this preference was the least definitive of any treatment, which indicated that mass and/or damping may play a role in food assessment. This result clearly shows that the termites were not fooled by composite blocks matched for mass or frequency, which implies that they probably employ more than a single simple measure in their food assessment strategy. This implies a degree of sophistication in their ability to assess their environment hitherto unknown. The potential importance of alternative features in the vibrational signals is discussed.

Termites utilise clay to build structural supports and so increase foraging resources.

Many termite species use clay to build foraging galleries and mound-nests. In some cases clay is placed within excavations of their wooden food, such as living trees or timber in buildings; however the purpose for this clay is unclear. We tested the hypotheses that termites can identify load bearing wood, and that they use clay to provide mechanical support of the load and thus allow them to eat the wood. In field and laboratory experiments, we show that the lower termite Coptotermes acinaciformis, the most basal species to build a mound-nest, can distinguish unloaded from loaded wood, and use clay differently when eating each type. The termites target unloaded wood preferentially, and use thin clay sheeting to camouflage themselves while eating the unloaded wood. The termites attack loaded wood secondarily, and build thick, load-bearing clay walls when they do. The termites add clay and build thicker walls as the load-bearing wood is consumed. The use of clay to support wood under load unlocks otherwise unavailable food resources. This behaviour may represent an evolutionary step from foraging behaviour to nest building in lower termites.

Novel method for pairing wood samples in choice tests.

Choice tests are a standard method to determine preferences in bio-assays, e.g. for food types and food additives such as bait attractants and toxicants. Choice between food additives can be determined only when the food substrate is sufficiently homogeneous. This is difficult to achieve for wood eating organisms as wood is a highly variable biological material, even within a tree species due to the age of the tree (e.g. sapwood vs. heartwood), and components therein (sugar, starch, cellulose and lignin). The current practice to minimise variation is to use wood from the same tree, yet the variation can still be large and the quantity of wood from one tree may be insufficient. We used wood samples of identical volume from multiple sources, measured three physical properties (dry weight, moisture absorption and reflected light intensity), then ranked and clustered the samples using fuzzy c-means clustering. A reverse analysis of the clustered samples found a high correlation between their physical properties and their source of origin. This suggested approach allows a quantifiable, consistent, repeatable, simple and quick method to maximize control over similarity of wood used in choice tests.

Quantifying ant activity using vibration measurements.

Ant behaviour is of great interest due to their sociality. Ant behaviour is typically observed visually, however there are many circumstances where visual observation is not possible. It may be possible to assess ant behaviour using vibration signals produced by their physical movement. We demonstrate through a series of bioassays with different stimuli that the level of activity of meat ants (Iridomyrmex purpureus) can be quantified using vibrations, corresponding to observations with video. We found that ants exposed to physical shaking produced the highest average vibration amplitudes followed by ants with stones to drag, then ants with neighbours, illuminated ants and ants in darkness. In addition, we devised a novel method based on wavelet decomposition to separate the vibration signal owing to the initial ant behaviour from the substrate response, which will allow signals recorded from different substrates to be compared directly. Our results indicate the potential to use vibration signals to classify some ant behaviours in situations where visual observation could be difficult.

Termites assess wood size by using vibration signals.

Contrary to the common perception that termites are indiscriminant eaters, termites choose their food carefully; however, the methods by which they choose food are not well understood. Using choice experiments and recordings of termites feeding on wooden blocks of different sizes, we show that worker drywood termites (Cryptotermes domesticus) use the resonant frequency of a block of wood to assess its size. Drywood termites showed differences in their response to vibration recordings of termites compared with artificially generated signals, suggesting that they can discriminate the source of vibration. Furthermore, fewer workers matured into neotenic reproductives when recorded termite signals were played, suggesting that vibration signals play an important role in termite communication.

Some Applications of the Sound Intensity Technique to Noise Control in the Workplace.

Over a decade has elapsed since commercial sound intensity measurement systems became available. A literature search has shown that the sound intensity technique has found increasing applications in recent years. In this article, the principle and errors of the sound intensity technique are briefly described. Four case studies are given to illustrate how the sound intensity technique can be applied to determine sound power under both laboratory and field conditions, to identify noise source and to measure sound transmission loss o f composite partitions "in situ." It has been shown that, provided the limitations of the sound intensity technique are understood, results obtained by the sound intensity technique enable effective noise control to be implemented in the workplace.