RESUMEN
Osteoclast precursors (OCPs) are thought to commit to osteoclast differentiation, which is accelerated by aging-related chronic inflammation, thereby leading to osteoporosis. However, whether the fate of OCPs can be reshaped to transition into other cell lineages is unknown. Here, we showed that M2 macrophage-derived extracellular vesicles (M2-EVs) could reprogram OCPs to downregulate osteoclast-specific gene expression and convert OCPs to M2 macrophage-like lineage cells, which reshaped the fate of OCPs by delivering the molecular metabolite glutamate. Upon delivery of glutamate, glutamine metabolism in OCPs was markedly enhanced, resulting in the increased production of α-ketoglutarate (αKG), which participates in Jmjd3-dependent epigenetic reprogramming, causing M2-like macrophage differentiation. Thus, we revealed a novel transformation of OCPs into M2-like macrophages via M2-EVs-initiated metabolic reprogramming and epigenetic modification. Our findings suggest that M2-EVs can reestablish the balance between osteoclasts and M2 macrophages, alleviate the symptoms of bone loss, and constitute a new approach for bone-targeted therapy to treat osteoporosis.
Asunto(s)
Vesículas Extracelulares , Osteoporosis , Humanos , Osteoclastos/metabolismo , Ácido Glutámico/metabolismo , Macrófagos/metabolismo , Osteoporosis/genética , Osteoporosis/terapia , Osteoporosis/metabolismoRESUMEN
The crystal moisture sensitivity can be tuned by the chemical composition on the crystal surface. Ammonium dinitramide (ADN) crystal is a promising oxidizer for solid propellants. However, its strong moisture sensitivity greatly limits its practical applications. Here, we report a novel strategy to reduce moisture sensitivity by trapping ammonium cations with montmorillonite (MMT) to modulate the chemistry composition on the ADN crystal surface. An extraordinary phenomenon can be found: the crystal surface of the recrystallized ADN with 1% MMT (ADN-1% MMT) is rearranged with more low-surface-energy -NO2 groups (65.84%) and less high-surface-energy NH4+ groups (4.8%). In addition, ADN-1% MMT presents a more homogeneous low surface energy feature with a narrower surface energy distribution. As a result, ADN-1% MMT exhibits a noticeably lower hygroscopicity at 20 °C and 60% RH, which is accordant with the simulated hygroscopicity based on XRD and moisture sensitivity prediction based on surface energy. This study brings out a novel modification idea to adjust crystal moisture sensitivity by tuning the chemistry composition on the crystal surface based on trapping cations.
RESUMEN
The synthesis, structural, and magnetic characterization of [FeIII4LnIII4(teaH)8(N3)8(H2O)] (Ln = Gd and Y) and the previously reported isostructural Dy analogue are discussed. The commonly held belief that both FeIII and GdIII can be regarded as isotropic ions is shown to be an oversimplification. This conclusion is derived from the magnetic data for the YIII analogue in terms of the zero-field splitting seen for FeIII and from the fact that the magnetic data for the new GdIII analogue can only be fit employing an additional anisotropy term for the GdIII ions. Furthermore, the Fe4Gd4 ring shows slow relaxation of magnetization. Our analysis of the experimental magnetic data employs both density functional theory as well as the finite-temperature Lanczos method which finally enables us to provide an almost perfect fit of magnetocaloric properties.
RESUMEN
OBJECTIVES: This study aims to study the accuracy of cone beam computed tomography (CBCT) for measuring peri-implant bone thickness in living patients via a novel visualization method (NVM). MATERIAL AND METHODS: The validity of the NVM was verified ex vivo by measuring the same peri-implant bone thicknesses in bovine ribs by using raw postoperative CBCT (clinical measurement, CM), the visualized fused images obtained using the NVM (visualized fused measurement, VF), and hard tissue sections (gold standard measurement, GS). The NVM was applied by deconstructing the postoperative CBCT model into the Modelpost-bone and Modelimplant and replacing it with bone from preoperative CBCT and standard implant models, respectively. In vivo, 52 implants were included, and the VF of each implant was obtained using data processing methods similar to those used ex vivo. Then, we compared the results of CM and VF. RESULTS: Ex vivo, the VF was similar to GS, while CM usually underestimated the peri-implant bone thickness, especially at the implant shoulder (P < 0.01). In vivo, on CBCT, areas with a peri-implant bone thickness of 0-0.50 mm were not visible, while those with a thickness of 0.50-1.00 mm were occasionally visible. There was less underestimation of bone along the implant long axis. CONCLUSIONS: Thin peri-implant bones could be completely underestimated on CBCT. CBCT scans alone are insufficient to warrant surgical intervention. Our NVM facilitates the accurate visual assessment of implant dimensions. CLINICAL RELEVANCE: The thickness of peri-implant bone could be completely underestimated when thinner than 1.0 mm in living patients. Familiarity with these confusing CBCT results may help clinicians and patients avoid further unnecessary evaluation, misdiagnosis, and invasive treatment.
Asunto(s)
Implantes Dentales , Animales , Huesos , Bovinos , Tomografía Computarizada de Haz Cónico/métodos , HumanosRESUMEN
Molecular dynamics (MD) simulation and experimental methods are used to explore the interaction between the propargyl-terminated polybutadiene (PTPB) binder and plasticizers bis(2,2-dinitropropyl) formal/acetal (BDNPF/A) and dioctyl sebacate (DOS). Flory-Huggins parameters, radial distribution functions, and binding energies between PTPB and plasticizers are calculated using MD simulations. The solubility parameters of PTPB and the plasticizers are calculated by both MD and group contribution method. The mesoscopic dynamics (MesoDyn) is used to simulate the meso-morphology of PTPB and plasticizer blends by converting the results of MD simulation into MesoDyn simulation parameters. The results of simulations and calculations show that PTPB has better compatibility with DOS than with BDNPF/A, and DOS is more suitable as a plasticizer for PTPB. The results of dynamic rheological experiments show that BDNPF/A has little effect on the dynamic viscosity of PTPB, and DOS can significantly reduce the dynamic viscosity of PTPB and has better plasticizing effect on PTPB. Differential scanning calorimetry and dynamic mechanical analysis tests indicate that the DOS and PTPB blend has only one glass transition temperature, while the PTPB and BDNPF/A blend has two glass transition temperatures. Both simulations and experimental results show that the PTPB binder have better compatibility with DOS than with BDNPF/A, and DOS has better plasticization effects on the PTPB binder.
RESUMEN
Herein we report the synthesis and characterization of a dinuclear TbIII single-molecule magnet (SMM) with two [TbPc2]0 units connected via a fused-phthalocyaninato ligand. The stable and robust complex [(obPc)Tb(Fused-Pc)Tb(obPc)] (1) was characterized by using synchrotron radiation measurements and other spectroscopic techniques (ESI-MS, FT-IR, UV). The magnetic couplings between the TbIII ions and the two π radicals present in 1 were explored by means of density functional theory (DFT). Direct and alternating current magnetic susceptibility measurements were conducted on magnetically diluted and nondiluted samples of 1, indicating this compound to be an SMM with improved properties compared to those of the well-known [TbPc2]-/0/+ and the axially symmetric dinuclear TbIII phthalocyaninato triple-decker complex (Tb2(obPc)3). Assuming that the probability of quantum tunneling of the magnetization (QTM) occurring in one TbPc2 unit is PQTM, the probability of QTM simultaneously occurring in 1 is PQTM2, meaning that QTM is effectively suppressed. Furthermore, nondiluted samples of 1 underwent slow magnetic relaxation times (τ ≈ 1000 s at 0.1 K), and the blocking temperature (TB) was determined to be ca. 16 K with an energy barrier for spin reversal (Ueff) of 588 cm-1 (847 K) due to D4d geometry and weak inter- and intramolecular magnetic interactions as an exchange bias (Hbias), reducing QTM. Four hyperfine steps were observed by micro-SQUID measurement. Furthermore, solution NMR measurements (one-dimensional, two-dimensional, and dynamic) were done on 1, which led to the determination of the high rotation barrier (83 ± 10 kJ/mol) of the obPc ligand. A comparison with previously reported TbIII triple-decker compounds shows that ambient temperature NMR measurements can indicate improvements in the design of coordination environments for SMMs. A large Ueff causes strong uniaxial magnetic anisotropy in 1, leading to a χax value (1.39 × 10-30 m3) that is larger than that for Tb2(obPc)3 (0.86 × 10-30 m3). Controlling the coordination environment and spin arrangement is an effective technique for suppressing QTM in TbPc2-based SMMs.
RESUMEN
Two new heterometallic Zn3 Ln3 (Ln3+ =Dy, Tb) complexes, with a double triangular topology of the metal ions, have been assembled from the polytopic Mannich base ligand 6,6'-{[2-(dimethylamino)ethylazanediyl]bis(methylene)}bis(2-methoxy-4-methylphenol) (H2 L) with the aid of an in situ generated carbonate ligand from atmospheric CO2 fixation. Theoretical calculations indicate axial ground states for the Ln3+ ions in these complexes, with their local magnetic moments being almost coplanar and tangential to the Ln3+ atoms that define the equilateral triangle. Therefore, they can be considered as single-molecule toroics (SMTs) with almost zero total magnetic moment. Micro-SQUID measurements on the Dy3+ counterpart show hysteresis loops below 3â K that have an S-shape, with large coercive fields opening upon cooling. This behavior is typical of a single molecule magnet (SMM) with very slow zero-field relaxation. At around ±0.35â T, the loops have a broad step, which is due to a direct relaxation process and corresponds to an acceleration of the relaxation of the magnetization, also observed at this magnetic field from ac susceptibility measurements. Simulations suggest that the broad step corresponds to two level avoidance of crossing points where the spin chiral Kramers doublet meets excited states of the coupled manifold, whose position is defined by exchange and dipole interactions. The Tb3+ counterpart does not exhibit SMM behavior, which is due to the fact that the degeneracy of the ground state of the exchange coupled system is lifted at zero field, thus favoring quantum tunneling of magnetization (QTM).
RESUMEN
Heterometallic Gd-Pt complexes ([Gd2 Pt3 (H2 O)2 (SAc)12 ] (SAc=thioacetate), [Y1.4 Gd0.6 Pt3 (H2 O)2 (SAc)12 ], and [Gd2 Pt3 (H2 O)6 (SAc)12 ]â 7 H2 O have been synthesized. The crystal structures and DFT calculations indicated a Gd-Pt heretometallic bond. Single-crystal ESR spectra determined the direction of magnetic anisotropy as direction of the Gd-Pt bond. In other words, the Gd-Pt bond dictates the direction of magnetic anisotropy. The heterometallic Gd-Pt bond lowers the symmetry of the Gd ion, splitting the Kramers doublet in a dc field. Thus, we observed clear field-induced slow magnetic relaxation of [Y1.4 Gd0.6 Pt3 (H2 O)2 (SAc)12 ] up to 36â K. The relaxation process was determined to be a direct process.
RESUMEN
The pentagonal bipyramidal single-ion magnets (SIMs) are among the most attractive prototypes of high-performance single-molecule magnets (SMMs). Here, a fluorescence-active phosphine oxide ligand CyPh2 PO (=cyclohexyl(diphenyl)phosphine oxide) was introduced into [Dy(CyPh2 PO)2 (H2 O)5 ]Br3 â 2 (CyPh2 PO)â EtOHâ 3 H2 O, and combined dynamic magnetic measurement, optical characterization, ab initio calculation, and magneto-optical correlation of this high-performance pseudo-D5h DyIII SIM with large Ueff (508(2)â K) and high magnetic hysteresis temperature (19â K) were performed. This work provides a deeper insight into the rational design of promising molecular magnets.
RESUMEN
K3Fe(CN)6 reacts with the viologen 1,1'-bis(2,4-dinitrophenyl)-4,4'-bipyridinium dication, (DNP)2+, to form a supramolecular complex, (DNP)3[Fe(CN)6]2·10H2O (1). The crystal structure of 1 reveals that there are two [Fe(CN)6]3- anions within an organic framework of three (DNP)2+ cations with the shortest Fe(III)···Fe(III) distances of ca. 9.8 Å, distances that minimize extensive long-range magnetic exchange coupling interactions between the [Fe(CN)6]3- anions, and, thus, 1 is paramagnetic above ca. 17 K and exhibits weak ferromagnetic coupling between 17 and 3 K and antiferromagnetic coupling between 3 and 1.8 K. The long Fe(III)···Fe(III) distances permit slow spin-spin and slow spin-lattice paramagnetic relaxation, relative to the iron-57 Larmor precession frequency, as is evidenced by the Mössbauer spectra measured between 3 and 60 K; between 85 and 295 K, rapid paramagnetic relaxation is observed. Both the slow spin-spin and slow spin-lattice relaxation are mediated by the organic, π-conjugated viologen cations. The Fe-C distances, the Mössbauer isomer shifts, the temperature dependence of the magnetic susceptibility, and the 3 K magnetization results all indicate the presence of low-spin Fe(III) ions in the [Fe(CN)6]3- anions in 1. There is no unequivocal indication of the presence of any formal electron delocalization or transfer from the [Fe(CN)6]3- anion to the (DNP)2+ cations in the results obtained from X-ray crystallography, magnetic measurements, and Mössbauer spectra. Because of enhancement of the spin-orbit coupling by the heavy-atom or -ion effect, the Fe(III) ions in the [Fe(CN)6]3- anions interact with the (DNP)2+ cations, causing them to fluoresce with increasing intensity upon cooling from 90 to 25 K when excited at 300 nm. The resulting luminescence of the viologen (DNP)2+ cation induced by the [Fe(CN)6]3- anions indicates the presence of significant mixing of the molecular orbitals derived from the [Fe(CN)6]3- anions and the molecular orbitals associated with the (DNP)2+ cations to yield bonding supramolecular orbitals in 1, a mixing that is also observed between 50 and 3 K in the temperature dependence of the isomer shift of 1.
RESUMEN
We report three dinuclear cobalt(II) complexes, [Co(L)Cl2]2 (L = bpy, mbpy, and dmpbt), that are bridged solely by chloride ions. High-field electron paramagnetic resonance and magnetometric measurements were applied to investigate the magnetic intramolecular Co-Co interactions. Simulation results based on the multispin model reveal that the complexes are weakly ferromagnetically coupled and that the isotropic exchange coupling constants differ slightly for the three complexes. Moreover, the competing effects of zero-field splitting and magnetic coupling on the temperature-dependent magnetic susceptibility were analyzed.
RESUMEN
Single-molecule magnets (SMMs) with a large spin reversal barrier have been recognized to exhibit slow magnetic relaxation that can lead to a magnetic hysteresis loop. Synthesis of highly stable SMMs with both large energy barriers and significantly slow relaxation times is challenging. Here, we report two highly stable and neutral Dy(III) classical coordination compounds with pentagonal bipyramidal local geometry that exhibit SMM behavior. Weak intermolecular interactions in the undiluted single crystals are first observed for mononuclear lanthanide SMMs by micro-SQUID measurements. The investigation of magnetic relaxation reveals the thermally activated quantum tunneling of magnetization through the third excited Kramers doublet, owing to the increased axial magnetic anisotropy and weaker transverse magnetic anisotropy. As a result, pronounced magnetic hysteresis loops up to 14 K are observed, and the effective energy barrier (Ueff = 1025 K) for relaxation of magnetization reached a breakthrough among the SMMs.
RESUMEN
A 3D metal-organic framework (MOF) having single-molecule magnet (SMM) linkers was prepared in crystalline form by using a tetrairon(III) complex functionalised with two divergent pyridyl groups, namely [Fe4 (pPy)2 (dpm)6 ] (1; H3 pPy=2-(hydroxymethyl)-2-(pyridin-4-yl)propane-1,3-diol, Hdpm=dipivaloylmethane). Reaction of 1 with silver(I) perchlorate afforded {[Fe4 (pPy)2 (dpm)6 ]2 Ag}ClO4 (2), which crystallises in a cubic face-centred lattice and exhibits two interlocked diamondoid networks. In 2, the SMMs act as linear ditopic synthons, and silver(I) ions as tetrahedral nodes coordinated by four pyridyl nitrogen atoms. The magnetic properties of 1 (S=5 and D≈-0.4â cm(-1) in the ground spin state) are largely preserved in 2, which shows slow magnetic relaxation with an anisotropy barrier of Ueff /kB =11.46(10)â K in zero field and 14.25(8)â K in an applied field of 1â kOe. However, crystal symmetry triggers highly noncollinear magnetic anisotropy contributions oriented at 109.47° from each other along the threefold axes of AgN4 tetrahedra, a unique scenario fully confirmed by a single-crystal cantilever torque magnetometry investigation. Magnetisation curves down to 0.03â K demonstrated the occurrence of a wide hysteresis loop when the magnetic field was swept along one of the four Ag-N bonds. By symmetry, the crystalline compound can then be persistently magnetised parallel or antiparallel to the four main diagonals of the unit cell, although the crystals have no overall second-order anisotropy.
RESUMEN
The chemically and structurally highly stable polyoxometalate (POM) single-molecule magnet (SMM) [(FeW9 O34 )2 Fe4 (H2 O)2 ](10-) (Fe6 W18 ) has been incorporated by direct or post-synthetic approaches into a biopolymer gelatin (Gel) matrix and two crystalline metal-organic frameworks (MOFs), including one diamagnetic (UiO-67) and one magnetic (MIL-101(Cr)). Integrity of the POM in the Fe6 W18 @Gel, Fe6 W18 @UiO-67 and Fe6 W18 @MIL-101(Cr) composites was confirmed by a set of complementary techniques. Magnetic studies indicate that the POMs are magnetically well isolated. Remarkably, in Fe6 W18 @Gel, the SMM properties of the embedded molecules are close to those of the crystals, with clear quantum tunneling steps in the hysteresis loops. For the Fe6 W18 @UiO-67 composite, the molecules retain their SMM properties, the energy barrier being slightly reduced in comparison to the crystalline material and the molecules exhibiting a tunneling rate of magnetization significantly faster than for Fe6 W18 @Gel. When Fe6 W18 is introduced into MIL-101(Cr), the width of the hysteresis loops is drastically reduced and the quantum tunneling steps are smeared out because of the magnetic interactions between the antiferromagnetic matrix and the SMM guest molecules.
RESUMEN
The versatile verdazyl family provides a new member as its reduced form 1,5-dimethyl-3-[3'-(hydroxymethyl)-2'-pyridine]-6-oxotetrazane (H3vdpyCH2OH). Upon oxidation and deprotonation in the presence of the acetate salts of CoII and DyIII, the vdpyCH2OH radical is able to self-assemble [(vdpyCH2O)2Co2Dy2ac8] (Hac = HO2CCH3), a 2p-3d-4f cluster displaying single-molecule-magnet properties.
RESUMEN
The synthesis and characterization of three Dy2 compounds, [Dy2(HL1)2(NO3)4] (1), [Dy2(L2)2(NO3)4] (2), and [Dy2(HL3)2(NO3)4] (3), formed using related tripodal ligands with a central tertiary amine bearing picolyl and alkoxy arms, 2-[(2-hydroxy-ethyl)-pyridin-2-ylmethylamino]-ethanol (H2L1), 2-(bis-pyridin-2-ylmethylamino)-ethanol (HL2), and 2-(bis-pyridin-2-ylmethylamino)-propane-1,3-diol (H2L3), are reported. The compounds are rare examples of alkoxide-bridged {Dy2} complexes and display capped square antiprism coordination geometry around each Dy(III) ion. Changes in the ligand field environment around the Dy(III) ions brought about through variations in the ligand donors can be gauged from the magnetic properties, with compounds 1 and 2 showing antiparallel coupling between the Dy(III) ions and 3 showing parallel coupling. Furthermore, slow relaxation of the magnetization typical of SMM behavior could be observed for compounds 2 and 3, suggesting that small variations in the ligand field can have a significant influence on the slow relaxation processes responsible for SMM behavior of Dy(III)-based systems.
RESUMEN
A family of mononuclear tetrahedral cobalt(II) thiourea complexes, [Co(L1)4](NO3)2 (1) and [Co(Lx)4](ClO4)2 where x = 2 (2), 3 (3), 4 (4) (where L1 = thiourea, L2 = 1,3-dibutylthiourea, L3 = 1,3-phenylethylthiourea, and L4 = 1,1,3,3-tetramethylthiourea), has been synthesized using a rationally designed synthetic approach, with the aim of stabilizing an Ising-type magnetic anisotropy (-D). On the basis of direct-current, alternating-current, and hysteresis magnetic measurements and theoretical calculations, we have identified the factors that govern the sign and magnitude of D and ultimately the ability to design a single-ion magnet for a tetrahedral cobalt(II) ion. To better understand the magnetization relaxation dynamics, particularly for complexes 1 and 2, dilution experiments were performed using their diamagnetic analogues, which are characterized by single-crystal X-ray diffraction with the general molecular formulas of [Zn(L1)4](NO3)2 (5) and [Zn(L2)4](ClO4)2 (6). Interestingly, intermolecular interactions are shown to play a role in quenching the quantum tunneling of magnetization in zero field, as evidenced in the hysteresis loop of 1. Complex 2 exhibits the largest Ueff value of 62 cm-1 and reveals open hysteresis loops below 4 K. Furthermore, the influence of the hyperfine interaction on the magnetization relaxation dynamics is witnessed in the hysteresis loops, allowing us to determine the electron/nuclear spin S(Co) = 3/2/I(Co) = 7/2 hyperfine coupling constant of 550 MHz, a method ideally suited to determine the hyperfine coupling constant of highly anisotropic metal ions stabilized with large D value, which are otherwise hard to determine by conventional methods such as electron paramagnetic resonance.
RESUMEN
A disk-shaped [Fe(III) 7 (Cl)(MeOH)6 (µ3 -O)3 (µ-OMe)6 (PhCO2 )6 ]Cl2 complex with C3 symmetry has been synthesised and characterised. The central tetrahedral Fe(III) is 0.733â Å above the almost co-planar Fe(III) 6 wheel, to which it is connected through three µ3 -oxide bridges. For this iron-oxo core, the magnetic susceptibility analysis proposed a Heisenberg-Dirac-vanâ Vleck (HDvV) mechanism that leads to an intermediate spin ground state of S=7/2 or 9/2. Within either of these ground state manifolds it is reasonable to expect spin frustration effects. The (57) Fe Mössbauer (MS) analysis verifies that the central Fe(III) ion easily aligns its magnetic moment antiparallel to the externally applied field direction, whereas the other six peripheral Fe(III) ions keep their moments almost perpendicular to the field at stronger fields. This unusual canted spin structure reflects spin frustration. The small linewidths in the magnetic Mössbauer spectra of polycrystalline samples clearly suggest an isotropic exchange mechanism for realisation of this peculiar spin topology.
RESUMEN
A new family of pentadecanuclear coordination cluster compounds (from now on simply referred to as clusters) [{Ln15 (OH)20 (PepCO2 )10 (DBM)10 Cl}Cl4 ] (PepCO2 =2-[{3-(((tert-butoxycarbonyl)amino)methyl)benzyl}amino]acetate, DBM=dibenzoylmethanide) with Ln=Y and Dy was obtained by using the cell-penetrating peptoid (CPPo) monomer PepCO2 H and dibenzoylmethane (DBMH) as supporting ligands. The combination of an inorganic cluster core with an organic cell-penetrating peptoid in the coordination sphere resulted in a core component {Ln15 (µ3 -OH)20 Cl}(24+) (Ln=Y, Dy), which consists of five vertex-sharing heterocubane {Ln4 (µ3 -OH)4 }(8+) units that assemble to give a pentagonal cyclic structure with one Cl atom located in the middle of the pentagon. The solid-state structures of both clusters were established by single-crystal X-ray crystallography. MS (ESI) experiments suggest that the cluster core is robust and maintained in solution. Pulsed gradient spin echo (PGSE) NMR diffusion measurements were carried out on the diamagnetic yttrium compound and confirmed the stability of the cluster in its dicationic form [{Y15 (µ3 -OH)20 (PepCO2 )10 (DBM)10 Cl}Cl2 ](2+) . The investigation of both static (dc) and dynamic (ac) magnetic properties in the dysprosium cluster revealed a slow relaxation of magnetization, indicative of single-molecule magnet (SMM) behavior below 8â K. Furthermore, the χT product as a function of temperature for the dysprosium cluster gave evidence that this is a ferromagnetically coupled compound below 11â K.
RESUMEN
Reactions of the N-substituted diethanolamine ligand N-n-butyldiethanolamine with chromium(II) and lanthanide(III)/rare earth salts (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Y) in the presence of coligands give access to three series of isostructural 1:1 3d(Cr(III))/4f(Ln(III)) coordination cluster compounds that can be designated in terms of octanuclear "square-in-square" (Ln = La-Tb), hexanuclear "triangle-in-triangle" (Ln = Dy, Ho, Y) and tetranuclear "butterfly" or defect dicubane core (Ln = Er-Lu) topologies as revealed by single-crystal X-ray crystallographic analysis. The bulk magnetic properties were also measured. The influences of the various components in the reaction system on the final topology and the role of the ionic radius are discussed.