PM10-bound trace elements in pan-European urban atmosphere.

Although many studies have discussed the impact of Europe's air quality, very limited research focused on the detailed phenomenology of ambient trace elements (TEs) in PM10 in urban atmosphere. This study compiled long-term (2013-2022) measurements of speciation of ambient urban PM10 from 55 sites of 7 countries (Switzerland, Spain, France, Greece, Italy, Portugal, UK), aiming to elucidate the phenomenology of 20 TEs in PM10 in urban Europe. The monitoring sites comprised urban background (UB, n = 26), traffic (TR, n = 10), industrial (IN, n = 5), suburban background (SUB, n = 7), and rural background (RB, n = 7) types. The sampling campaigns were conducted using standardized protocols to ensure data comparability. In each country, PM10 samples were collected over a fixed period using high-volume air samplers. The analysis encompassed the spatio-temporal distribution of TEs, and relationships between TEs at each site. Results indicated an annual average for the sum of 20 TEs of 90 ± 65 ng/m3, with TR and IN sites exhibiting the highest concentrations (130 ± 66 and 131 ± 80 ng/m3, respectively). Seasonal variability in TEs concentrations, influenced by emission sources and meteorology, revealed significant differences (p < 0.05) across all monitoring sites. Estimation of TE concentrations highlighted distinct ratios between non-carcinogenic and carcinogenic metals, with Zn (40 ± 49 ng/m3), Ti (21 ± 29 ng/m3), and Cu (23 ± 35 ng/m3) dominating non-carcinogenic TEs, while Cr (5 ± 7 ng/m3), and Ni (2 ± 6 ng/m3) were prominent among carcinogenic ones. Correlations between TEs across diverse locations and seasons varied, in agreement with differences in emission sources and meteorological conditions. This study provides valuable insights into TEs in pan-European urban atmosphere, contributing to a comprehensive dataset for future environmental protection policies.

Novel Coumarin-Steroid/Terpenoid Hybrids: In Vitro and In Silico Anticancer Studies.

We have synthesized a series of novel coumarin-steroid and triterpenoid hybrids and evaluated their potential anticancer activity through molecular docking calculations and in vitro antiproliferative assays. These hybrids, derived from estrone and oleanolic acid, were linked via hydrocarbon spacers of varying lengths. Molecular docking studies against human aromatase revealed strong interactions, particularly for compound 11d, which exhibited significant binding affinity (-12.6308 kcal/mol). In vitro assays demonstrated that compounds 6b and 11d had notable antiproliferative effects, with GI50 values of 5.4 and 7.0 µM against WiDr (colon) and HeLa (cervix) cancer cells, respectively. These findings highlight the potential of these hybrids as novel anticancer agents targeting aromatase, warranting further investigation and optimization.

Multi-Device Parallel MRI Reconstruction: Efficient Partitioning for Undersampled 5D Cardiac CINE.

Cardiac CINE, a form of dynamic cardiac MRI, is indispensable in the diagnosis and treatment of heart conditions, offering detailed visualization essential for the early detection of cardiac diseases. As the demand for higher-resolution images increases, so does the volume of data requiring processing, presenting significant computational challenges that can impede the efficiency of diagnostic imaging. Our research presents an approach that takes advantage of the computational power of multiple Graphics Processing Units (GPUs) to address these challenges. GPUs are devices capable of performing large volumes of computations in a short period, and have significantly improved the cardiac MRI reconstruction process, allowing images to be produced faster. The innovation of our work resides in utilizing a multi-device system capable of processing the substantial data volumes demanded by high-resolution, five-dimensional cardiac MRI. This system surpasses the memory capacity limitations of single GPUs by partitioning large datasets into smaller, manageable segments for parallel processing, thereby preserving image integrity and accelerating reconstruction times. Utilizing OpenCL technology, our system offers adaptability and cross-platform functionality, ensuring wider applicability. The proposed multi-device approach offers an advancement in medical imaging, accelerating the reconstruction process and facilitating faster and more effective cardiac health assessment.

Impact of COVID-19 restrictions on hourly levels of PM10, PM2.5 and black carbon at an industrial suburban site in northern Spain.

Due to the COVID-19 pandemic, lockdown restrictions were established around the world. Many studies have assessed whether these restrictions affected atmospheric pollution. Comparison between them is difficult as the periods of time considered are generally not the same and thus, different conclusions may be reached. Besides, most of them consider mean daily pollutant concentration, despite differences being observed according to the time of day. In this study, the hourly levels of PM10, PM2.5 and black carbon (BC) in an industrial suburban area in the north of Spain were analysed from May 2019 to June 2020 and compared with those from the literature, using the same period in each case. In general, the highest concentrations were reached when the wind direction came from the southwest (where a steelworks, a coal-fired power plant and other industries are located) and during the night-time, both before and during the lockdown. The highest concentrations of PM10, PM2.5 and BC were observed from December to February (on average: 45, 17 and 1.3 µg m-3, respectively). The decrease/increase in those pollutants levels during the lockdown were found to be highly dependent on the period considered. Indeed, PM10 can be found to decrease by up to 39% or increase by 12%; PM2.5 can decrease by 21% or increase by up to 36%; and BC, although it generally decreases (by up to 42%), can increase by 7.4%.

Impact of COVID-19 restrictions on the dry deposition fraction of settleable particulate matter at three industrial urban/suburban locations in northern Spain.

Ninety 24-h samples of the dry deposition fraction of settleable particulate matter (DSPM) were collected at one suburban industrial site ('EMA') and two urban industrial sites ('Lauredal' and 'Laboratory') in the western area of Gijón (North of Spain) from December 2019 to June 2020. The levels registered point to an environmental issue that should receive close attention from environmental authorities. Before lockdown restrictions due to COVID-19 were established, all samples collected at the EMA site exceeded 300 mg·m-2·d-1 (the Spanish limit value until 2002). Large amounts of DSPM were also registered at the Lauredal and Laboratory sites, maximum levels reaching 1039.2 and 672.7 mg·m-2·d-1, respectively. Seven metals were analysed in DSPM samples: Al, Ca, Fe, K, Mg, Mn and Na. Fe reached the highest values: 2473.4, 463.4 and 293.3 mg·m-2·d-1 (EMA, Lauredal and Laboratory sites, respectively). This study quantifies the reductions in the DSPM levels registered (on average, 97.2, 73.5 and 90.5% at the EMA, Lauredal and Laboratory sites, respectively) during the lockdown, which involved the restriction of population mobility and industrial activity. The influence of wind speed and its direction were also assessed to better understand the role of these restrictions in the observed reductions. The concentrations of all the metals in the DSPM were reduced by more than 75%, on average, except for K at the Laboratory and Lauredal sites. These decreases were much higher than those found by other authors for smaller fractions of the atmospheric particulate matter (PM10, PM2.5). The findings of the present study highlight the importance of DSPM in highly industrialized urban/suburban locations and indicate the direction that legal measures might take, given the influence of anthropogenic emissions.

Psychological responses to COVID-19 in a Mexican population: an exploratory study during second and third phases.

This work constitutes an exploratory study during the second and third phases of COVID-19 in Mexico, characterized by local transmission and untraceable cases, respectively, with an incidental sample of 666 participants. The 21-item Depression Anxiety Stress Scale was used to assess depression, anxiety and stress associated to COVID-19. Additionally, the Impact of the Event Scale-Revised was applied to assess the impact of the event, and the 10-item Connor-Davidson Resilience Scale was employed to assess resilience. Participants' levels of traumatic impact (21.7%), severe depression (7%), severe anxiety (9.4%) and severe stress (5.4%) were revealed to be lower than other populations. Comparison of means and effect size η2p of the data shows that women and young people (18-39 years) suffer the greatest negative effects. Individuals with higher levels of resilience experience fewer psychological consequences confirming its importance in the face of the adversities. These findings provide valuable information on the impact of COVID-19 pandemic in the Mexican population, allowing a comparative analysis at an international level which can be helpful in the development of appropriate sanitary policies.

Causal analysis of fetal death in high-risk pregnancies.

OBJECTIVES: To determine the causes of fetal death among the stillbirths using two classification systems from 22 weeks of gestation in a period of three years in high-risk pregnancies. This is a retrospective observational study. METHODS: The National Institute of Perinatal Health in Mexico City is a Level 3 care referral center attending high-risk pregnancies from throughout the country. The population consisted of patients with fetal death during a three-year period. Between January 2016 and December 2018, all stillbirths were examined in the Pathology Department by a pathologist and a medical geneticist. Stillbirth was defined as a fetal death occurring after 22 weeks of gestation. RESULTS: Main outcome measures: Causal analysis of fetal death using the International Statistical Classification of Disease and Related Health Problems-Perinatal Mortality (ICD-PM) and initial causes of fetal death (INCODE) classification systems. A total of 297 stillborn neonates were studied. The distribution of gestational age in antepartum stillbirths (55.2%) showed a bimodal curve, 36% occurred between 24 and 27 weeks and 32% between 32 and 36 weeks. In comparison, the majority (86%) of intrapartum deaths (44.8%) were less than 28 weeks of gestation. Of the 273 women enrolled, 93 (34%) consented to a complete fetal autopsy. The INCODE system showed a present cause in 42%, a possible cause in 54% and a probable cause in 93% of patients. CONCLUSIONS: The principal causes of antepartum death were fetal abnormalities and pathologic placental conditions and the principal causes of intrapartum death were complications of pregnancy which caused a premature labor and infections.

Elastic AlignedSENSE for Dynamic MR Reconstruction: A Proof of Concept in Cardiac Cine.

Numerous methods in the extensive literature on magnetic resonance imaging (MRI) reconstruction exploit temporal redundancy to accelerate cardiac cine. Some of them include motion compensation, which involves high computational costs and long runtimes. In this work, we proposed a method-elastic alignedSENSE (EAS)-for the direct reconstruction of a motion-free image plus a set of nonrigid deformations to reconstruct a 2D cardiac sequence. The feasibility of the proposed approach was tested in 2D Cartesian and golden radial multi-coil breath-hold cardiac cine acquisitions. The proposed approach was compared against parallel imaging compressed sense (sPICS) and group-wise motion corrected compressed sense (GWCS) reconstructions. EAS provides better results on objective measures with considerable less runtime when an acceleration factor is higher than 10×. Subjective assessment of an expert, however, invited proposing the combination of EAS and GWCS as a preferable alternative to GWCS or EAS in isolation.

Association between personal, medical and positive psychological variables with somatization in university health sciences students.

OBJECTIVE: To measure personal, medical and psychological positive and negative variables and to determine their relation with somatization in a sample of health sciences students. Subjects and methods: A total of 594 (34.43%) of the 1725 health science students of a public university answered an online survey with personal and medical information as well as the following psychological variables: phsychological well-being, five facets mindfulness questionnaire (FFMQ), life satisfaction, depression, and academic stress. Additionally, the presence of 11 somatic symptoms and 11 diseases during the last year was measured. Results: Most students were women (74.06%) who were 19.96 ± 4.28 years old. The global frequency of somatization in the previous year was 66.59%, and the presence of any measured disease 14.75%. With the multivariate analysis, self-acceptance was the most related variable (negatively) with somatization, followed by the sum of diseases, female gender, academic stress, smoking, and depression, in a model with an R-value of 0.634, self-acceptance was also the most related variable (negatively) with depression, being this last the most related variable with academic stress. Conclusions: After analyzing all variables considered in this study, self-acceptance was the most related variable with somatization and depression; this highlights the importance of strengthening the acceptance of the self in the student population in order to prevent these conditions and their consequences.

Disease Activity Score on 28 Joints and Polypharmacy Are Independent Predictors for Health-Related Quality of Life Evaluated by INCAVISA in Patients With Rheumatoid Arthritis.

OBJECTIVE: The aim of this study was to investigate the main factors associated to a diminished health-related quality of life (HRQoL) evaluated by INCAVISA (Health-Related Quality of Life Inventory for Latin American Patients) in patients with rheumatoid arthritis (RA). METHODS: Female, 18 years or older, RA (American College of Rheumatology 1987 criteria and American College of Rheumatology/European League against Rheumatism 2010 criteria) patients who attended the outpatient rheumatology department of the Hospital Civil "Dr. Juan I. Menchaca," Guadalajara, Mexico, matched with healthy controls were included. Patients with any known comorbidities or treatment with antidepressive drugs were excluded. Trained physicians performed the RA clinical evaluation and INCAVISA. All data were analyzed using SPSS 21.0 software (SPSS Inc, Chicago, IL); P < 0.05 was considered statistically significant. RESULTS: Patients with polypharmacy (≥3 drugs) had a lower HRQoL by INCAVISA. The number of drugs, total comorbidities, and DAS-28 (Disease Activity Score on 28 Joints) were negatively correlated with total INCAVISA. In multivariate analysis, DAS-28 and polypharmacy were independent predictors for a negative perception of HRQoL evaluated by INCAVISA in RA patients. CONCLUSIONS: Disease activity and disability secondary to RA have a negative impact in the HRQoL. Other factors such as the number of drugs prescribed to these patients have been shown to be important for the negative perception of their HRQoL evaluated by INCAVISA.

Variability of ambient air ammonia in urban Europe (Finland, France, Italy, Spain, and the UK).

This study addressed the scarcity of NH3 measurements in urban Europe and the diverse monitoring protocols, hindering direct data comparison. Sixty-nine datasets from Finland, France, Italy, Spain, and the UK across various site types, including industrial (IND, 8), traffic (TR, 12), urban (UB, 22), suburban (SUB, 12), and regional background (RB, 15), are analyzed to this study. Among these, 26 sites provided 5, or more, years of data for time series analysis. Despite varied protocols, necessitating future harmonization, the average NH3 concentration across sites reached 8.0 ± 8.9 µg/m3. Excluding farming/agricultural hotspots (FAHs), IND and TR sites had the highest concentrations (4.7 ± 3.2 and 4.5 ± 1.0 µg/m3), followed by UB, SUB, and RB sites (3.3 ± 1.5, 2.7 ± 1.3, and 1.0 ± 0.3 µg/m3, respectively) indicating that industrial, traffic, and other urban sources were primary contributors to NH3 outside FAH regions. When referring exclusively to the FAHs, concentrations ranged from 10.0 ± 2.3 to 15.6 ± 17.2 µg/m3, with the highest concentrations being reached in RB sites close to the farming and agricultural sources, and that, on average for FAHs there is a decreasing NH3 concentration gradient towards the city. Time trends showed that over half of the sites (18/26) observed statistically significant trends. Approximately 50 % of UB and TR sites showed a decreasing trend, while 30 % an increasing one. Meta-analysis revealed a small insignificant decreasing trend for non-FAH RB sites. In FAHs, there was a significant upward trend at a rate of 3.51[0.45,6.57]%/yr. Seasonal patterns of NH3 concentrations varied, with urban areas experiencing fluctuations influenced by surrounding emissions, particularly in FAHs. Diel variation showed differing patterns at urban monitoring sites, all with higher daytime concentrations, but with variations in peak times depending on major emission sources and meteorological patterns. These results offer valuable insights into the spatio-temporal patterns of gas-phase NH3 concentrations in urban Europe, contributing to future efforts in benchmarking NH3 pollution control in urban areas.

Inter-annual trends of ultrafine particles in urban Europe.

Ultrafine particles (UFP, those with diameters ≤ 100 nm), have been reported to potentially penetrate deeply into the respiratory system, translocate through the alveoli, and affect various organs, potentially correlating with increased mortality. The aim of this study is to assess long-term trends (5-11 years) in mostly urban UFP concentrations based on measurements of particle number size distributions (PNSD). Additionally, concentrations of other pollutants and meteorological variables were evaluated to support the interpretations. PNSD datasets from 12 urban background (UB), 5 traffic (TR), 3 suburban background (SUB) and 1 regional background (RB) sites in 15 European cities and 1 in the USA were evaluated. The non-parametric Theil-Sen's method was used to detect monotonic trends. Meta-analyses were carried out to assess the overall trends and those for different environments. The results showed significant decreases in NO, NO2, BC, CO, and particle concentrations in the Aitken (25-100 nm) and the Accumulation (100-800 nm) modes, suggesting a positive impact of the implementation of EURO 5/V and 6/VI vehicle standards on European air quality. The growing use of Diesel Particle Filters (DPFs) might also have clearly reduced exhaust emissions of BC, PM, and the Aitken and Accumulation mode particles. However, as reported by prior studies, there remains an issue of poor control of Nucleation mode particles (smaller than 25 nm), which are not fully reduced with current DPFs, without emission controls for semi-volatile organic compounds, and might have different origins than road traffic. Thus, contrasting trends for Nucleation mode particles were obtained across the cities studied. This mode also affected the UFP and total PNC trends because of the high proportion of Nucleation mode particles in both concentration ranges. It was also found that the urban temperature increasing trends might have also influenced those of PNC, Nucleation and Aitken modes.

Segmentation of the common carotid artery walls based on a frequency implementation of active contours: segmentation of the common carotid artery walls.

Atherosclerosis is one of the most extended cardiovascular diseases nowadays. Although it may be unnoticed during years, it also may suddenly trigger severe illnesses such as stroke, embolisms or ischemia. Therefore, an early detection of atherosclerosis can prevent adult population from suffering more serious pathologies. The intima-media thickness (IMT) of the common carotid artery (CCA) has been used as an early and reliable indicator of atherosclerosis for years. The IMT is manually computed from ultrasound images, a process that can be repeated as many times as necessary (over different ultrasound images of the same patient), but also prone to errors. With the aim to reduce the inter-observer variability and the subjectivity of the measurement, a fully automatic computer-based method based on ultrasound image processing and a frequency-domain implementation of active contours is proposed. The images used in this work were obtained with the same ultrasound scanner (Philips iU22 Ultrasound System) but with different spatial resolutions. The proposed solution does not extract only the IMT but also the CCA diameter, which is not as relevant as the IMT to predict future atherosclerosis evolution but it is a statistically interesting piece of information for the doctors to determine the cardiovascular risk. The results of the proposed method have been validated by doctors, and these results are visually and numerically satisfactory when considering the medical measurements as ground truth, with a maximum deviation of only 3.4 pixels (0.0248 mm) for IMT.

Key factors for abating particulate matter in a highly industrialized area in N Spain: Fugitive emissions and secondary aerosol precursors.

In highly industrialized areas, abating particulate matter (PM) is complex owing to the variety of emission sources with different chemical profiles that may mix in the atmosphere. Gijón-an industrial city in northern Spain-was selected as a case study to better understand the key emission sources and improve air quality in highly industrialized areas. Accordingly, the trends of various air quality indicators (PM10, PM2.5, SO2, NO2, and O3) during the past decade (2010-2019) were analyzed. Additionally, the inorganic and organic PM10 compositions were analyzed for source apportionment studies and to assess the impact of COVID-19 restrictions on PM10 levels. The results revealed that over the past decade, PM10 concentrations decreased, whereas PM2.5 concentrations dominated by secondary inorganic aerosols (SIA) remained relatively constant. Notably, during the COVID-19 lockdown, the PM10 concentration increased by 9.1%, primarily owing to an increase in regional SIA (>65%) due to specific meteorological conditions that favor the formation of secondary PM from gaseous precursors. Overall, eight key PM10 sources were identified: "industrial fugitive PM resuspension" (FPM, 28% of mean PM10 concentration), "aged sea spray" (SSp, 16%), "secondary nitrate" (SN, 15%), "local diffuse source" (LPM, 12%), "solid fuel combustion" (SFC, 7.8%), "biomass burning" (BB, 7.4%), "secondary sulphate" (SSu, 6.0%), and "sinter" (SIN, 4.5%). The PM10 concentration in Gijón is significantly influenced by the integrated steel industry (FPM, SFC, and SIN; 41% of PM10) and fugitive primary PM emissions were the main source (FPM and LPM; 40%). To reduce PM10 and PM2.5 concentrations, industrial fugitive emissions, which are currently poorly regulated, and SIA precursors must be abated. This study provides a methodological approach that combines trend analysis, chemical speciation, and source apportionment for assessing pollution abatement strategies in industrialized areas with a complex mix of emission sources.

The Moderating Effect of Resilience on Mental Health Deterioration among COVID-19 Survivors in a Mexican Sample.

Resilience has been reported to be a protective psychological variable of mental health; however, little is known about its role in COVID-19 survivors. Thus, in this study, we aimed to evaluate the levels of depression, anxiety, stress, traumatic impact, and resilience associated with COVID-19, as well as to investigate the role of resilience as a moderating variable. A sample of 253 participants responded to an online survey; all were previously diagnosed with COVID-19 by a nasopharyngeal swab RT-PCR test, were older than 18 years, and signed an informed consent form. Significant negative correlations were found between resilience and the mental health variables. Higher resilience was significantly related to a lower impact of the event, stress, anxiety, and depression when the number of symptoms was low. Only when the duration of COVID-19 was short and resilience levels were medium or high was psychological distress reduced. Moreover, resilience moderated the effects of COVID-19 on mental health, even if a relapse occurred. The results emphasize the need for interdisciplinary interventions aimed at providing COVID-19 patients with psychological and social resources to cope with the disease, as well as with probable relapses.

Using hypnoanalysis and guided imagery to identify and manage emotional aspects of multiple sclerosis.

BACKGROUND: To date, no studies have used hypnosis to examine and manage the potential emotional causes of multiple sclerosis (MS) in the scientific field; therefore, we decided to compare the effectiveness of hypnoanalysis and guided imagery for determining and manage these emotional causes. METHODS: Fifteen participants with severe MS were included and assigned into 2 groups: hypnoanalysis and guided imagery. In the hypnoanalysis group, the participants underwent 10 hypnotic sessions to understand events related to the cause of the disease, which were restructured (the events were modified by adding the psychological resources that each involved person needed); in addition, other techniques were used to investigate the causes and solutions according to the participants' unconscious. The guided imagery group received 10 group sessions of body relaxation and guided imagery, which were recorded for practice at home. Outcome measures, namely, disability (the Expanded Disability Status Scale, EDSS), quality of life (QoL, measured with the SF-36) and number of relapses, were evaluated 4 months previous the intervention, at baseline, post-intervention, and 3 months later. RESULTS: Hypnoanalysis revealed that stressful events and psychoemotional maladaptive patterns acted as causal, detonating, or aggravating factors of disease, and psychoemotional changes were the most frequent and varied solutions. No changes were observed in disability between the two groups. The guided imagery group showed an improvement in 2 subscales of QoL when compared with the hypnoanalysis group (which disappeared at the follow-up); this difference is probably due to the increased number of sessions and probably due to psychoemotional maladaptive patterns being more frequently mentioned than difficult circumstances in life and/or unsolved past events. However, the techniques used in hypnoanalysis were effective in understanding the potential emotional causes of MS, which showed high intra- and inter-participant consistency. CONCLUSIONS: The daily use of guided imagery overcame the restructuring of negative past events to improve QoL in patients with MS. TRIAL REGISTRATION: ACTRN12618002024224 (retrospectively registered).

Settleable matter in a highly industrialized area: Chemistry and health risk assessment.

Settleable particulate matter (SPM) was collected at two sampling points within an urban area highly affected by nearby industrial activities. Total deposition values up to 386 mg ·m-2·d-1 were registered, the majority of samples exceeding the limit value established in the legislation in force in Spain until 2002 (300 mg·m-2·d-1). Dry deposition values showed high variability (8.6-830.3 mg·m-2·d-1). Forty-one metals and metalloids were analysed in the dry fraction of SPM, the main being Fe and Ca (maximums: 304.4 and 68.6 mg·m-2·d-1, respectively), followed by Al, Mg, Na, K, Mn, Ti, P and Zn. Trace elements like As and Pb reached up to 7.3 and 76.3 µg·â€¯m-2·d-1, respectively. Strong correlations (r > 0.90, p-value < 0.05) between Fe and other elements (Ca, Mn and Pb) were found at both sampling sites. Scanning electron microscopy confirmed the presence of these particles rich in Fe and Ca, in addition to other components, whose morphologies pointed out to anthropogenic sources. These results combined with meteorology data suggest a common industrial source contributing to the levels of these metals. Furthermore, a human health risk study was carried out to assess the potential carcinogenic and non-carcinogenic risks of exposure to thirteen elements in these particles (Al, As, Cd, Co, Cu, Mn, Mo, Ni, Pb, Sb, Sr, V and Zn). The highest levels of risk seemed to be associated with the presence of As, Pb and Sb.

Fast 4D elastic group-wise image registration. Convolutional interpolation revisited.

BACKGROUND AND OBJECTIVE: This paper proposes a new and highly efficient implementation of 3D+t groupwise registration based on the free-form deformation paradigm. METHODS: Deformation is posed as a cascade of 1D convolutions, achieving great reduction in execution time for evaluation of transformations and gradients. RESULTS: The proposed method has been applied to 4D cardiac MRI and 4D thoracic CT monomodal datasets. Results show an average runtime reduction above 90%, both in CPU and GPU executions, compared with the classical tensor product formulation. CONCLUSIONS: Our implementation, although fully developed for the metric sum of squared differences, can be extended to other metrics and its adaptation to multiresolution strategies is straightforward. Therefore, it can be extremely useful to speed up image registration procedures in different applications where high dimensional data are involved.

A clinically viable vendor-independent and device-agnostic solution for accelerated cardiac MRI reconstruction.

BACKGROUND AND OBJECTIVE: Recent research has reported methods that reconstruct cardiac MR images acquired with acceleration factors as high as 15 in Cartesian coordinates. However, the computational cost of these techniques is quite high, taking about 40 min of CPU time in a typical current machine. This delay between acquisition and final result can completely rule out the use of MRI in clinical environments in favor of other techniques, such as CT. In spite of this, reconstruction methods reported elsewhere can be parallelized to a high degree, a fact that makes them suitable for GPU-type computing devices. This paper contributes a vendor-independent, device-agnostic implementation of such a method to reconstruct 2D motion-compensated, compressed-sensing MRI sequences in clinically viable times. METHODS: By leveraging our OpenCLIPER framework, the proposed system works in any computing device (CPU, GPU, DSP, FPGA, etc.), as long as an OpenCL implementation is available, and development is significantly simplified versus a pure OpenCL implementation. In OpenCLIPER, the problem is partitioned in independent black boxes which may be connected as needed, while device initialization and maintenance is handled automatically. Parallel implementations of both a groupwise FFD-based registration method, as well as a multicoil extension of the NESTA algorithm have been carried out as processes of OpenCLIPER. Our platform also includes significant development and debugging aids. HIP code and precompiled libraries can be integrated seamlessly as well since OpenCLIPER makes data objects shareable between OpenCL and HIP. This also opens an opportunity to include CUDA source code (via HIP) in prospective developments. RESULTS: The proposed solution can reconstruct a whole 12-14 slice CINE volume acquired in 19-32 coils and 20 phases, with an acceleration factor of ranging 4-8, in a few seconds, with results comparable to another popular platform (BART). If motion compensation is included, reconstruction time is in the order of one minute. CONCLUSIONS: We have obtained clinically-viable times in GPUs from different vendors, with delays in some platforms that do not have correspondence with its price in the market. We also contribute a parallel groupwise registration subsystem for motion estimation/compensation and a parallel multicoil NESTA subsystem for l1-l2-norm problem solving.

Precautionary Behaviors during the Second and Third Phases of the COVID-19 Pandemic: Comparative Study in the Latin American Population.

The population's behavioral responses to containment and precautionary measures during the COVID-19 pandemic have played a fundamental role in controlling the contagion. A comparative analysis of precautionary behaviors in the region was carried out. A total of 1184 people from Mexico, Colombia, Chile, Cuba, and Guatemala participated through an online survey containing a questionnaire on sociodemographic factors, precautionary behaviors, information about COVID-19, concerns, maintenance of confinement, and medical symptoms associated with COVID-19. Cubans reported the highest scores for information about COVID-19. Colombians reported less frequent usage of precautionary measures (e.g., use of masks), but greater adherence to confinement recommendations in general, in contrast to the low levels of these behaviors in Guatemalans. Chileans reported greater pandemic-related concerns and the highest number of medical symptoms associated with COVID-19. These findings allow a partial characterization of the Latin American population's responses during the second and third phases of the COVID-19 pandemic and highlight the importance of designing and managing public health policies according to the circumstances of each population when facing pandemics.