One-Pot Synthesis of Bioinspired Peptide-Decorated Apatite Nanoparticles for Nanomedicine.

Hybrid organic-inorganic bio-inspired apatite nanoparticles (NPs) are attractive for biomedical applications and especially in nanomedicine. Unfortunately, their applications in nanomedicine are limited by their broad particle size distributions and uncontrolled drug loading due to their multistep synthesis process.  Besides, very few attempts at exposing bioactive peptides on apatite NPs are made. In this work, an original one-pot synthesis of well-defined bioactive hybrid NPs composed of a mineral core of bioinspired apatite surrounded by an organic corona of bioactive peptides is reported. Dual stabilizing-bioactive agents, phosphonated polyethylene glycol-peptide conjugates, are prepared and directly used during apatite precipitation i) to form the organic corona during apatite precipitation, driving the size and shape of resulting hybrid NPs with colloidal stabilization and ii) to expose peptide moieties (RGD or YIGSR sequences) at the NPs periphery in view of conferring additional surface properties to enhance their interaction with cells. Here, the success of this approach is demonstrated, the functionalized NPs are fully characterized by Fourier-transform infrared, Raman, X-ray diffraction, solid and liquid state NMR, transmission electron microscopy, and dynamic light scattering, and their interaction with fibroblast cells is followed, unveiling a synergistic proliferative effect.

Fast and Cost-Efficient 17 O-Isotopic Labeling of Carboxylic Groups in Biomolecules: From Free Amino Acids to Peptide Chains.

17 O NMR spectroscopy is a powerful technique, which can provide unique information regarding the structure and reactivity of biomolecules. However, the low natural abundance of 17 O (0.04 %) generally requires working with enriched samples, which are not easily accessible. Here, we present simple, fast and cost-efficient 17 O-enrichment strategies for amino acids and peptides by using mechanochemistry. First, five unprotected amino acids were enriched under ambient conditions, consuming only microliter amounts of costly labeled water, and producing pure molecules with enrichment levels up to ∼40 %, yields ∼60-85 %, and no loss of optical purity. Subsequently, 17 O-enriched Fmoc/tBu-protected amino acids were produced on a 1 g/day scale with high enrichment levels. Lastly, a site-selective 17 O-labeling of carboxylic functions in peptide side-chains was achieved for RGD and GRGDS peptides, with ∼28 % enrichment level. For all molecules, 17 O ssNMR spectra were recorded at 14.1 T in reasonable times, making this an important step forward for future NMR studies of biomolecules.

Paving the Way towards Sustainability of Polyurethanes: Synthesis and Properties of Terpene-Based Diisocyanate.

Due to growing concerns about environmental issues and the decline of petroleum-based resources, the synthesis of new biobased compounds for the polymer industry has become a prominent and timely topic. P-menthane-1,8-diamine (PMDA) is a readily available compound synthesized from turpentine, a cheap mixture of natural compounds isolated from pine trees. PMDA has been extensively used for its biological activities, but it can also serve as a source of valuable monomers for the polymer industry. In this work, commercial PMDA (ca. 85% pure) was purified by salinization, crystallization, and alkali treatment and then converted into p-menthane-1,8-diisocyanate (PMDI) through a phosgene-free synthesis at room temperature. A thorough analytical study using NMR techniques (1H, 13C, 13C-1H HSQC, 13C-1H HMBC, and 1H-1H NOESY) enables the characterization of the cis-trans isomeric mixtures of both PMDA and PMDI. These structural studies allowed for a better understanding of the spatial configuration of both isomers. Then, the reactivity of PMDI with a primary alcohol (benzyl alcohol) was studied in the presence of nine different catalysts exhibiting different activation modes. Finally, the use of PMDI in the synthesis of polyurethanes was explored to demonstrate that PMDI can be employed as a new biobased alternative to petrochemical-based isocyanates such as isophorone diisocyanate (IPDI).

Fluorescent Dynamic Covalent Polymers for DNA Complexation and Templated Assembly.

Dynamic covalent polymers (DCPs) offer opportunities as adaptive materials of particular interest for targeting, sensing and delivery of biological molecules. In this view, combining cationic units and fluorescent units along DCP chains is attractive for achieving optical probes for the recognition and delivery of nucleic acids. Here, we report on the design of acylhydrazone-based DCPs combining cationic arginine units with π-conjugated fluorescent moieties based on thiophene-ethynyl-fluorene cores. Two types of fluorescent building blocks bearing neutral or cationic side groups on the fluorene moiety are considered in order to assess the role of the number of cationic units on complexation with DNA. The (chir)optical properties of the building blocks, the DCPs, and their complexes with several types of DNA are explored, providing details on the formation of supramolecular complexes and on their stability in aqueous solutions. The DNA-templated formation of DCPs is demonstrated, which provides new perspectives on the assembly of fluorescent DCP based on the nucleic acid structure.

Synthesis, Characterization, and Encapsulation Properties of Rigid and Flexible Porphyrin Cages Assembled from N-Heterocyclic Carbene-Metal Bonds.

Four porphyrins equipped with imidazolium rings on the para positions of their meso aryl groups were prepared and used as tetrakis(N-heterocyclic carbene) (NHC) precursors for the synthesis of porphyrin cages assembled from eight NHC-M bonds (M = Ag+ or Au+). The conformation of the obtained porphyrin cages in solution and their encapsulation properties strongly depend on the structure of the spacer -(CH2)n- (n = 0 or 1) between meso aryl groups and peripheral NHC ligands. In the absence of methylene groups (n = 0), porphyrin cages are rather rigid and the short porphyrin-porphyrin distance prevents the encapsulation of guest molecules like 1,4-diazabicyclo[2.2.2]octane (DABCO). By contrast, the presence of methylene functions (n = 1) between meso aryl groups and peripheral NHCs offers additional flexibility to the system, allowing the inner space between the two porphyrins to expand enough to encapsulate guest molecules like water molecules or DABCO. The peripheral NHC-wingtip groups also play a significant role in the encapsulation properties of the porphyrin cages.

Unveiling the Structure and Reactivity of Fatty-Acid Based (Nano)materials Thanks to Efficient and Scalable 17O and 18O-Isotopic Labeling Schemes.

Fatty acids are ubiquitous in biological systems and widely used in materials science, including for the formulation of drugs and the surface-functionalization of nanoparticles. However, important questions regarding the structure and reactivity of these molecules are still to be elucidated, including their mode of binding to certain metal cations or materials surfaces. In this context, we have developed novel, efficient, user-friendly, and cost-effective synthetic protocols based on ball-milling, for the 17O and 18O isotopic labeling of two key fatty acids which are widely used in (nano)materials science, namely stearic and oleic acid. Labeled molecules were analyzed by 1H and 13C solution NMR, IR spectroscopy, and mass spectrometry (ESI-TOF and LC-MS), as well as 17O solid state NMR (for the 17O labeled species). In both cases, the labeling procedures were scaled-up to produce up to gram quantities of 17O- or 18O-enriched molecules in just half-a-day, with very good synthetic yields (all ≥84%) and enrichment levels (up to an average of 46% per carboxylic oxygen). The 17O-labeled oleic acid was then used for the synthesis of a metal soap (Zn-oleate) and the surface-functionalization of ZnO nanoparticles (NPs), which were characterized for the first time by high-resolution 17O NMR (at 14.1 and 35.2 T). This allowed very detailed insight into (i) the coordination mode of the oleate ligand in Zn-oleate to be achieved (including information on Zn···O distances) and (ii) the mode of attachment of oleic-acid at the surface of ZnO (including novel information on its photoreactivity upon UV-irradiation). Overall, this work demonstrates the high interest of these fatty acid-enrichment protocols for understanding the structure and reactivity of a variety of functional (nano)materials systems using high resolution analyses like 17O NMR.

DNA-Based Asymmetric Inverse Electron-Demand Hetero-Diels-Alder.

While artificial cyclases hold great promise in chemical synthesis, this work presents the first example of a DNA-catalyzed inverse electron-demand hetero-Diels-Alder (IEDHDA) between dihydrofuran and various α,ß-unsaturated acyl imidazoles. The resulting fused bicyclic O,O-acetals containing three contiguous stereogenic centers are obtained in high yields (up to 99 %) and excellent diastereo- (up to >99:1 dr) and enantioselectivities (up to 95 % ee) using a low catalyst loading. Most importantly, these results show that the concept of DNA-based asymmetric catalysis can be expanded to new synthetic transformations offering an efficient, sustainable, and highly selective tool for the construction of chiral building blocks.

Porphyrins Conjugated with Peripheral Thiolato Gold(I) Complexes for Enhanced Photodynamic Therapy.

Porphyrins fused to imidazolium salts across two neighboring ß-pyrrolic positions were used as N-heterocyclic carbene (NHC) precursors to anchor AuI -Cl complexes at their periphery. Synthesis of several thiolato-AuI complexes was then achieved by substituting chloride for thiolates. Photodynamic properties of these complexes were investigated: the data obtained show that the Au-S bonds could be cleaved upon irradiation. The proposed mechanism to explain the release of thiolate moiety involves the S atom oxidation by singlet oxygen generated in the course of irradiation. In view of photodynamic therapy (PDT) applications, these porphyrins fused to NHC-AuI complexes were tested as photosensitizers to kill MCF-7 breast cancer cells. Results show the important role played by the ancillary ligands (chloride versus thiolates) on the photodynamic effect.

Synthesis and structural characterization of monomeric and dimeric peptide nucleic acids prepared by using microwave-promoted multicomponent reactions.

A solution phase synthesis of peptide nucleic acid monomers and dimers was developed by using microwave-promoted Ugi multicomponent reactions. A mixture of a functionalized amine, a carboxymethyl nucleobase, paraformaldehyde and an isocyanide as building blocks generates PNA monomers which are then partially deprotected and used in a second Ugi 4CC reaction, leading to PNA dimers. Conformational rotamers were identified by using NMR and MD simulations.

Silaproline helical mimetics selectively form an all-trans PPII helix.

The polyproline II helix (PPII) is increasingly recognized as an important element in peptide and protein structures. The discovery of pertinent PPII peptidomimetics is of great interest to tune physical properties of the targeted structure. A series of silaproline oligomers from dimer to pentamer were synthesized. CD studies, NMR spectroscopy and molecular modeling revealed that the ribbon preferentially populates the polyproline type II secondary structure in both [D]chloroform and [D4 ]MeOH. The characteristics of this new lipophilic PPII-like helix were determined.

Thiazole-based γ-building blocks as reverse-turn mimetic to design a gramicidin S analogue: conformational and biological evaluation.

This paper describes the ability of a new class of heterocyclic γ-amino acids named ATCs (4-amino(methyl)-1,3-thiazole-5-carboxylic acids) to induce turns when included in a tetrapeptide template. Both hybrid Ac-Val-(R or S)-ATC-Ile-Ala-NH2 sequences were synthesized and their conformations were studied by circular dichroism, NMR spectroscopy, MD simulations, and DFT calculations. It was demonstrated that the ATCs induced highly stable C9 pseudocycles in both compounds promoting a twist turn and a reverse turn conformation depending on their absolute configurations. As a proof of concept, a bioactive analogue of gramicidin S was successfully designed using an ATC building block as a turn inducer. The NMR solution structure of the analogue adopted an antiparallel ß-pleated sheet conformation similar to that of the natural compound. The hybrid α,γ-cyclopeptide exhibited significant reduced haemotoxicity compared to gramicidin S, while maintaining strong antibacterial activity.

Stereoselective synthesis of original spirolactams displaying promising folded structures.

Access to diastereoisomeric forms of original spirolactam frameworks and investigation of their folded potentials are depicted here. Taking advantage of a stereoselective ring-contraction reaction, the Transannular Rearrangement of Activated Lactams (TRAL), followed by two unprecedented tandem reactions, we describe here an efficient access to elegant spirocyclic scaffolds. After dimerization, NMR analyses, circular dichroism, SEM and molecular modelling indicated the existence of an attractive edifice able to fold and behave as a PPII helix, a common yet neglected peptidic secondary structure.

Mapping the N-Terminal Hexokinase-I Binding Site onto Voltage-Dependent Anion Channel-1 To Block Peripheral Nerve Demyelination.

The voltage-dependent anion channel (VDAC), the most abundant protein on the outer mitochondrial membrane, is implicated in ATP, ion and metabolite exchange with cell compartments. In particular, the VDAC participates in cytoplasmic and mitochondrial Ca2+ homeostasis. Notably, the Ca2+ efflux out of Schwann cell mitochondria is involved in peripheral nerve demyelination that underlies most peripheral neuropathies. Hexokinase (HK) isoforms I and II, the main ligands of the VDAC, possess a hydrophobic N-terminal structured in α-helix (NHKI) that is necessary for the binding to the VDAC. To gain further insight into the molecular basis of HK binding to the VDAC, we developed and optimized peptides based on the NHKI sequence. These modifications lead to an increase of the peptide hydrophobicity and helical content that enhanced their ability to prevent peripheral nerve demyelination. Our results provide new insights into the molecular basis of VDAC/HK interaction that could lead to the development of therapeutic compounds for demyelinating peripheral neuropathies.

Photochemical electron transfer mediated addition of naphthylamine derivatives to electron-deficient alkenes.

Using photochemical electron transfer, N,N-dimethylnaphthylamine derivatives are added to α,ß-unsaturated carboxylates. The addition takes place exclusively in the α-position of electron-deficient alkenes and mainly in the 4-position of N,N-dimethylnaphthalen-1-amine. A minor regioisomer results from the addition in the 5-position of this naphthylamine. A physicochemical study reveals that the fluorescence quenching of N,N-dimethylnaphthalen-1-amine is diffusion-controlled and that the back electron transfer is highly efficient. Therefore no transformation is observed at lower concentrations. To overcome this limitation and to induce an efficient transformation, minor amounts of water or another proton donor as well as an excess of the naphthylamine derivative are necessary. A mechanism involving a contact radical ion pair is discussed. Isotopic labeling experiments reveal that no hydrogen is directly transferred between the substrates. The hydrogen transfer to the furanone moiety observed in the overall reaction therefore results from an exchange with the reaction medium. An electrophilic oxoallyl radical generated from the furanone reacts with the naphthylamine used in excess. Concerning some mechanistic details, the reaction is compared with radical and electrophilic aromatic substitutions. The transformation was carried out with a variety of electron-deficient alkenes. Sterically hindered furanone derivatives are less reactive under standard conditions. In a first experiment, such a compound was transformed using heterogeneous electron transfer photocatalysis with TiO(2).

Synthesis of trifluoromethyl cyclohexyl, cyclohexenyl and aryl compounds via stepwise Robinson annulation.

The diketone 2-fluoro-2-(trifluoromethyl)-1-phenylhexane-1,5-dione 3 was synthesized by a Mukaiyama Michael type reaction from the corresponding tetrafluoroenol silyl ether prepared from pentafluoropropiophenone. This diketone was treated under basic conditions and was converted, depending on the stoichiometry of the base, into the surprisingly stable ketol 4-fluoro-4-(trifluoromethyl)-3-hydroxy-3-phenylcyclohexanone 4 as a single diastereomer (catalytic KOH) or to the biphenylol 6-(trifluoromethyl)biphenyl-3-ol (excess KOH, THF) 5. Solvolysis of the trifluoromethyl group (anionic activation) occurred using excess KOH in alcohol. The corresponding cyclohexenone derivative 7, the usual product of Robinson annulation, might be prepared in good yield via mesylation of the ketol. Thus various unprecedented fluorinated cyclohexane and aromatic derivatives were achieved in a few steps from the commercially available pentafluoropropiophenone.

A Novel Sesquiterpene Lactone Xanthatin-13-(pyrrolidine-2-carboxylic acid) Isolated from Burdock Leaf Up-Regulates Cells' Oxidative Stress Defense Pathway.

The aim of our study was to identify novel molecules able to induce an adaptative response against oxidative stress during the first stages of metabolic syndrome. A cellular survival in vitro test against H2O2-based test was applied after pretreatment with various natural bitter Asteraceae extracts. This screening revealed potent protection from burdock leaf extract. Using chromatography and LC-MS-RMN, we then isolated and identified an original sesquiterpene lactone bioactive molecule: the Xanthatin-13-(pyrrolidine-2-carboxylic acid) (XPc). A real-time RT-qPCR experiment was carried out on three essential genes involved in oxidative stress protection: GPx, SOD, and G6PD. In presence of XPc, an over-expression of the G6PD gene was recorded, whereas no modification of the two others genes could be observed. A biochemical docking approach demonstrated that XPc had a high probability to directly interact with G6PD at different positions. One of the most probable docking sites corresponds precisely to the binding site of AG1, known to stabilize the G6PD dimeric form and enhance its activity. In conclusion, this novel sesquiterpene lactone XPc might be a promising prophylactic bioactive agent against oxidative stress and inflammation in chronic diseases such as metabolic syndrome or type 2 diabetes.

Vegetable oil-based hybrid microparticles as a green and biocompatible system for subcutaneous drug delivery.

The aim of this study was to evidence the ability of vegetable oil-based hybrid microparticles (HMP) to be an efficient and safe drug delivery system after subcutaneous administration. The HMP resulted from combination of a thermostabilized emulsification process and a sol-gel chemistry. First of all, castor oil was successfully silylated by means of (3-Isocyanatopropyl)trimethoxysilane in solvent-free and catalyst-free conditions. Estradiol, as a model drug, was dissolved in silylated castor oil (ICOm) prior to emulsification, and then an optimal sol-gel crosslinking was achieved inside the ICOm microdroplets. The resulting estradiol-loaded microparticles were around 80 µm in size and allowed to entrap 4 wt% estradiol. Their release kinetics in a PBS/octanol biphasic system exhibited a one-week release profile, and the released estradiol was fully active on HeLa ERE-luciferase ERα cells. The hybrid microparticles were cytocompatible during preliminary tests on NIH 3T3 fibroblasts (ISO 10993-5 standard) and they were fully biocompatible after subcutaneous injection on mice (ISO 10993-6 standard) underlining their high potential as a safe and long-acting subcutaneous drug delivery system.

Cost-efficient and user-friendly 17O/18O labeling procedures of fatty acids using mechanochemistry.

Two mechanochemical procedures for 17O/18O-isotope labeling of fatty acids are reported: a carboxylic acid activation/hydrolysis approach and a saponification approach. The latter route allowed first-time enrichment of important polyunsaturated fatty acids (PUFAs) including docosahexaenoic acid (DHA). Overall, a total of 9 pure labeled products were isolated in high yields (≥80%) and with high enrichment levels (≥37% average labeling of C=O and C-OH carboxylic oxygen atoms), under mild conditions, and in short time (

Molecular complexes and main-chain organometallic polymers based on Janus bis(carbenes) fused to metalloporphyrins.

Janus bis(N-heterocyclic carbenes) composed of a porphyrin core with two N-heterocyclic carbene (NHC) heads fused to opposite pyrroles were used as bridging ligands for the preparation of metal complexes. We first focused our attention on the synthesis of gold(i) chloride complexes [(NHC)AuCl] and investigated the substitution of the chloride ligand by acetylides to obtain the corresponding [(NHC)AuC[triple bond, length as m-dash]CR] complexes. Polyacetylides were then used to obtain molecular multiporphyrinic systems with porphyrins fused to only one NHC ligand, while main-chain organometallic polymers (MCOPs) were obtained when using Janus porphyrin bis(NHCs). Interestingly, MCOPs incorporating zinc(ii) porphyrins proved to be efficient as heterogeneous photocatalysts for the generation of singlet oxygen upon visible light irradiation.

Inorganic Sol-Gel Polymerization for Hydrogel Bioprinting.

An inorganic sol-gel polymerization process was used as a cross-linking reaction during three-dimensional (3D) bioprinting of cell-containing hydrogel scaffolds. Hybrid hydroxypropyl methyl cellulose (HPMC), with a controlled ratio of silylation, was prepared and isolated as a 3D-network precursor. When dissolved in a biological buffer containing human mesenchymal stem cells, it yields a bioink that can be printed during polymerization by extrusion. It is worth noting that the sol-gel process proceeded at pH 7.4 using biocompatible mode of catalysis (NaF and glycine). The printing window was determined by rheology and viscosity measurements. The physicochemical properties of hydrogels were studied. Covalent functionalization of the network can be easily performed by adding a triethoxysilyl-containing molecule; a fluorescent hybrid molecule was used as a proof of concept.