Facile Fabrication of Multifunctional Hydrogel Nanoweb Coating Using Carboxymethyl Chitosan-Based Short Nanofibers for Blood-Contacting Medical Devices.

Blood-contacting medical devices (BCDs) require antithrombotic, antibacterial, and low-friction surfaces. Incorporating a nanostructured surface with the functional hydrogel onto BCD surfaces can enhance the performances; however, their fabrication remains challenging. Here, we introduce a straightforward method to fabricate a multifunctional hydrogel-based nanostructure on BCD surfaces using O-carboxymethyl chitosan-based short nanofibers (CMC-SNFs). CMC-SNFs, fabricated via electrospinning and cutting processes, are easily sprayed and entangled onto the BCD surface. The deposited CMC-SNFs form a robust nanoweb layer via fusion at the contact area of the nanofiber interfaces. The superhydrophilic CMS-SNF nanoweb surface creates a water-bound layer that effectively prevents the nonspecific adhesion of bacteria and blood cells, thereby enhancing both antimicrobial and antithrombotic performances. Furthermore, the CMC-SNF nanoweb exhibits excellent lubricity and durability on the bovine aorta. The demonstration results of the CMC-SNF coating on catheters and sheaths provide evidence of its capability to apply multifunctional surfaces simply for diverse BCDs.

Antimicrobial and Antifouling Effects of Petal-Like Nanostructure by Evaporation-Induced Self-Assembly for Personal Protective Equipment.

Although the personal protective equipment (PPE) used by healthcare workers (HCWs) effectively blocks hazardous substances and pathogens, it does not fully rule out the possibility of infection, as pathogens surviving on the fabric surface pose a substantial risk of cross-infection through unintended means. Therefore, PPE materials that exhibit effective biocidal activity while minimizing contamination by viscous body fluids (e.g., blood and saliva) and pathogen-laden droplets are highly sought. In this study, petal-like nanostructures (PNSs) are synthesized through the vertical rearrangement of colloidal lamellar bilayers via evaporation-induced self-assembly of octadecylamine, silica-alumina sol, and diverse photosensitizer. The developed method is compatible with various fabrics and imparts visible-light-activated antimicrobial and superhydrophobic-based antifouling activities. PNS-coated fabrics could provide a high level of protection and effectively block pathogen transmission as exemplified by their ability to roll off viscous body fluids reducing bacterial droplet adhesion and to inactivate various microorganisms. The combination of antifouling and photobiocidal activities results in the complete inactivation of sprayed pathogen-laden droplets within 30 min. Thus, this study paves the way for effective contagious disease management and the protection of HCWs in general medical environments, inspiring further research on the fabrication of materials that integrate multiple useful functionalities.

Comparison of the pathogenicity of porcine reproductive and respiratory syndrome virus (PRRSV)-1 and PRRSV-2 in pregnant sows.

To date, few studies related to the evaluation of the pathogenicity of different PRRSV isolates using a reproductive model have been undertaken, and the main focus has remained on respiratory models using young pigs. This study aimed to evaluate the pathogenicity of two PRRSV-1 isolates (D40 and CBNU0495) and two PRRSV-2 isolates (K07-2273 and K08-1054) in a reproductive model. Pregnant sows were experimentally infected with PRRSV at gestational day 93 or used as an uninfected negative control. Sera were collected at 0, 3, 7, 14, and 19 days post-challenge (dpc) for virological and serological assays. At 19 dpc, all sows were euthanized, and their fetuses were recovered by performing cesarean section and immediately euthanized for sample collection. Here, compared to the other isolates, the CBNU0495 isolate replicated most efficiently in the pregnant sows, and K07-2273 produced the highest rate of reproductive failure even though it did not replicate as efficiently as the other isolates in sows and fetuses, indicating that vertical transmission and reproductive failure due to PRRSV infection do not have any significant correlation with the viral loads in samples from sows and fetuses. Similarly, the viral loads and the histopathological lesions did not show any correlation with each other, as the PRRSV-2-infected groups displayed more prominent and frequent histopathological lesions with lower viral loads than the PRRSV-1-infected groups. However, viral loads in the myometrium/endometrium might be related to the spreading of PRRSV in the fetuses, which affected the birth weight of live fetuses. This study contributes to a better understanding of the pathogenicity of the most prevalent Korean PRRSVs in a reproductive model.

Photobiocidal-triboelectric nanolayer coating of photosensitizer/silica-alumina for reusable and visible-light-driven antibacterial/antiviral air filters.

Outbreaks of airborne pathogens pose a major threat to public health. Here we present a single-step nanocoating process to endow commercial face mask filters with photobiocidal activity, triboelectric filtration capability, and washability. These functions were successfully achieved with a composite nanolayer of silica-alumina (Si-Al) sol-gel, crystal violet (CV) photosensitizer, and hydrophobic electronegative molecules of 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFOTES). The transparent Si-Al matrix strongly immobilized the photosensitizer molecules while dispersing them spatially, thus suppressing self-quenching. During nanolayer formation, PFOTES was anisotropically rearranged on the Si-Al matrix, promoting moisture resistance and triboelectric charging of the Si-Al/PFOTES-CV (SAPC)-coated filter. The SAPC nanolayer stabilized the photoexcited state of the photosensitizer and promoted redox reaction. Compared to pure-photosensitizer-coated filters, the SAPC filter showed substantially higher photobiocidal efficiency (∼99.99 % for bacteria and a virus) and photodurability (∼83 % reduction in bactericidal efficiency for the pure-photosensitizer filter but ∼0.34 % for the SAPC filter after 72 h of light irradiation). Moreover, after five washes with detergent, the SAPC filter maintained its photobiocidal and filtration performance, proving its reusability potential. Therefore, this SAPC nanolayer coating provides a practical strategy for manufacturing an antimicrobial and reusable mask filter for use during the ongoing COVID-19 pandemic.

The enhancement mechanism of photo-response depending on oxygen pressure for Ga2O3 photo detectors.

We have optimized the responsivity and response speed of a ß-Ga2O3-based photodetector. The ß-Ga2O3 thin films were deposited on a glass substrate under various oxygen partial pressures from 0 to 50 mTorr using pulsed laser deposition. Time-response measurements show that the as-grown ß-Ga2O3 at an oxygen partial pressure of 50 mTorr has the fastest response speed and decay times of 33 and 100 ms, which are better than those prepared at lower oxygen pressures. This sample also showed a high photoresponsivity of 5 A W-1 and detectivity of 1012 cmHz1/2/W. The high performance of the ß-Ga2O3 detector grown at the oxygen partial pressure of 50 mTorr might be due to the reduction of oxygen vacancies caused by the increase in oxygen content during deposition. The results reveal the importance of the oxygen processing gas in promoting photodetector performance.

Long-Term Chemical Aging of Hybrid Halide Perovskites.

Because the power conversion efficiency (PCE) of hybrid halide perovskite solar cells (PSCs) could exceed 24%, extensive research has been focused on improving their long-term stability for commercialization in the near future. In a previous study, we reported that the addition of a number of ionized iodide (triiodide: I3-) ions during perovskite film formation significantly improved the efficiency of PSCs by reducing deep-level defects in the perovskite layer. Understanding the relationship between the concentration of these defects and the long-term chemical aging of PSCs is important not only for obtaining fundamental insight into the perovskite materials but also for studying the long-term chemical stability of PSCs. Herein we aim to identify the origin of the natural decay in PCE during long-term chemical aging of PSCs in the dark based on formamidinium lead triiodide by comparing the performance of control and low-defect (LD) devices. After aging for 200 days, the change in the PCE of the LD devices (1.3%) was found to be half that of the control devices (2.6%). We investigated this difference using grazing incidence wide-angle X-ray scattering, deep-level transient spectroscopy, scanning photoelectron microscopy, and high-resolution photoemission spectroscopy. The addition of I3- was found to reduce the amounts of hydroxide and Ox in the halide perovskites (HPs), affecting the migration of defects and the structural transformation of the HPs.

Independent evolution of porcine reproductive and respiratory syndrome virus 2 with genetic heterogeneity in antigenic regions of structural proteins in Korea.

Porcine reproductive and respiratory syndrome virus (PRRSV) is an economically important pathogen that affects the global swine industry. The continuous evolution of this virus has made control and prevention difficult, which emphasizes the importance of monitoring currently circulating PRRSV strains. In this study, we investigated the genetic characteristics of whole structural genes of 35 PRRSV-2 isolates that circulated between 2012 and 2017 in Korea. Genetic and phylogenetic analysis demonstrated that a recently identified PRRSV-2 shared a relatively low level of nucleotide sequence identity that ranged from 86.2% to 92.8%; however, they were clustered into four distinct Korean field clades, except KU-N1702, in ORF2-7-based phylogeny. KU-N1702 was closely related to the NADC30-like strains that were identified in the USA and China. Amino acid sequence analysis showed that the GP5 neutralizing epitope was conserved among the KU viruses. In contrast, the viruses had genetic mutations in key residues for viral neutralization within GP5 and M. For minor structural proteins, neutralizing epitopes, aa 41-55 of GP2, 61-75 of GP3, and 51-65 of GP4, were variable among the KU viruses. Bioinformatics demonstrated diversifying evolution within the GP2 and GP4 neutralizing epitopes and the emergence of a novel glycosylation site within the GP3 and GP4 neutralizing epitopes. Taken together, these data provide evidence that Korean PRRSV-2 evolved independently in Korea, with genetic heterogeneity in antigenic regions of structural proteins.

Classical Swine Fever Outbreak after Modified Live LOM Strain Vaccination in Naive Pigs, South Korea.

We report classical swine fever outbreaks occurring in naive pig herds on Jeju Island, South Korea, after the introduction of the LOM vaccine strain. Two isolates from sick pigs had >99% identity with the vaccine stain. LOM strain does not appear safe; its use in the vaccine should be reconsidered.

Reduction of interface traps between poly-Si and SiO2 layers through the dielectric recovery effect during delayed pulse bias stress.

We investigate the interface trap behavior between tunneling oxide and poly-Si channel layer post erase/write cycling with a delayed pulse by using deep level transient spectroscopy. For comparison of the defect states depending on the stress pulses, a Schottky and a metal-oxide semiconductor device were fabricated. A defect state at about E c -0.51 eV in the Schottky device was measured before the annealing process. Three-hole trap states with activation energies of E v +0.28 eV, E v +0.53 eV, and E v +0.76 eV appeared after the post-annealing process. The electron trap was about E c -0.15 eV after erase/write 3000 cycling was applied at ±10 V for 100 ms at 25 °C and 85 °C. These defect states may have an effect on the charge loss behavior of the electrons localized in the charge trap layer at the retention mode of three-dimensional non-volatile memory devices. Dramatically, after the endurance stress was applied with a delayed pulse of 300 cycling at 85 °C for 50.4 h, no interface traps of the deep level transient spectroscopy spectra appeared. Dielectric recovery can decrease the density of the interface trap and improve the retention properties. This may have been caused by the passivation effect on the dangling bond of the interface traps.

Comparison of Clinical and Radiological Outcomes after Vertebroplasty and Balloon Kyphoplasty in the Treatment of Osteoporotic Vertebral Compression Fractures.

BACKGROUND: Vertebroplasty (VP) and balloon kyphoplasty (KP) are effective means with which to improve pain and function in osteoporotic vertebral compression fractures. However, the risk of complications after these procedures is poorly understood, with concerns regarding adjacent vertebral fractures. This study retrospectively investigated the clinical and radiological outcomes of these procedures. METHODS: A total of 115 patients who experienced their first vertebral fracture were treated with VP (N=63) or KP (N=52) at the Dankook University Hospital between January 2013 and December 2022. The clinical outcomes were evaluated using the visual analog scale (VAS) preoperative and at 1-year follow-up. Radiological comparisons were performed for kyphosis correction, vertebral height restoration, and postoperative cement leakage. RESULTS: KP was more effective than VP, especially for vertebral body height restoration and kyphotic angle reduction (P<0.05). However, the incidence of cement leakage, new adjacent vertebral fractures, and improvement in pain assessed by VAS did not differ statistically between the 2 groups (P>0.05). CONCLUSIONS: Considering that KP was performed on fractures with severe deformity, no differences were observed in the clinical outcomes and incidence of adjacent vertebral fractures compared Considering that KP was performed for fractures with severe deformity, there was no difference in clinical outcomes and incidence of adjacent vertebral fractures compared to VP. Improvements in radiological measurements were demonstrated. Therefore, KP may be a good treatment option for pain relief and long-term prognosis in patients with high-compressive-rate vertebral fractures.

Antibiofilm and antithrombotic hydrogel coating based on superhydrophilic zwitterionic carboxymethyl chitosan for blood-contacting devices.

Blood-contacting devices must be designed to minimize the risk of bloodstream-associated infections, thrombosis, and intimal lesions caused by surface friction. However, achieving effective prevention of both bloodstream-associated infections and thrombosis poses a challenge due to the conflicting nature of antibacterial and antithrombotic activities, specifically regarding electrostatic interactions. This study introduced a novel biocompatible hydrogel of sodium alginate and zwitterionic carboxymethyl chitosan (ZW@CMC) with antibacterial and antithrombotic activities for use in catheters. The ZW@CMC hydrogel demonstrates a superhydrophilic surface and good hygroscopic properties, which facilitate the formation of a stable hydration layer with low friction. The zwitterionic-functionalized CMC incorporates an additional negative sulfone group and increased negative charge density in the carboxyl group. This augmentation enhances electrostatic repulsion and facilitates the formation of hydration layer. This leads to exceptional prevention of blood clotting factor adhesion and inhibition of biofilm formation. Subsequently, the ZW@CMC hydrogel exhibited biocompatibility with tests of in vitro cytotoxicity, hemolysis, and catheter friction. Furthermore, in vivo tests of antithrombotic and systemic inflammation models with catheterization indicated that ZW@CMC has significant advantages for practical applications in cardiovascular-related and sepsis treatment. This study opens a new avenue for the development of chitosan-based multifunctional hydrogel for applications in blood-contacting devices.

Electrical and optical characteristics of n-Zno/p-GaN hetero-junction diode fabricated by ultra-high vacuum sputter.

We investigated the electrical and optical properties of n-ZnO/p-GaN hetero-junction diode fabricated by an ultra-high vacuum radio frequency magnetron sputter. A physical relationship between the rotation rate during deposition process and post annealing conditions after deposited ZnO layer on p-GaN layer was discussed. When the rotation rates during deposition process of n-ZnO layer were 5 rpm and 15 rpm, the full width at half maximum of photoluminescence spectra of ZnO layer on the p-GaN layer was about 106 and 133 meV, respectively. Also, the ratio of deep level emission to near band edge emission was dramatically increased as increasing the rotation rate from 5 to 15 rpm. The n-ZnO/p-GaN hetero-junction diode grown at 5 rpm has a higher ratio of forward to reverse currents than the diode grown at 15 rpm. Also, the 600 degrees C-annealed diodes with 5 rpm showed good rectifying behavior with the barrier height of 0.74 eV, the ideality factor of 12.2, and the forward to reverse current ratio of 614 at +/- 8 V.

Basic amino acid-mediated cationic amphiphilic surfaces for antimicrobial pH monitoring sensor with wound healing effects.

BACKGROUND: The wound healing process is a complex cascade of physiological events, which are vulnerable to both our body status and external factors and whose impairment could lead to chronic wounds or wound healing impediments. Conventional wound healing materials are widely used in clinical management, however, they do not usually prevent wounds from being infected by bacteria or viruses. Therefore, simultaneous wound status monitoring and prevention of microbial infection are required to promote healing in clinical wound management. METHODS: Basic amino acid-modified surfaces were fabricated in a water-based process via a peptide coupling reaction. Specimens were analyzed and characterized by X-ray photoelectron spectroscopy, Kelvin probe force microscopy, atomic force microscopy, contact angle, and molecular electrostatic potential via Gaussian 09. Antimicrobial and biofilm inhibition tests were conducted on Escherichia coli and Staphylococcus epidermidis. Biocompatibility was determined through cytotoxicity tests on human epithelial keratinocytes and human dermal fibroblasts. Wound healing efficacy was confirmed by mouse wound healing and cell staining tests. Workability of the pH sensor on basic amino acid-modified surfaces was evaluated on normal human skin and Staphylococcus epidermidis suspension, and in vivo conditions. RESULTS: Basic amino acids (lysine and arginine) have pH-dependent zwitterionic functional groups. The basic amino acid-modified surfaces had antifouling and antimicrobial properties similar to those of cationic antimicrobial peptides because zwitterionic functional groups have intrinsic cationic amphiphilic characteristics. Compared with untreated polyimide and modified anionic acid (leucine), basic amino acid-modified polyimide surfaces displayed excellent bactericidal, antifouling (reduction ~ 99.6%) and biofilm inhibition performance. The basic amino acid-modified polyimide surfaces also exhibited wound healing efficacy and excellent biocompatibility, confirmed by cytotoxicity and ICR mouse wound healing tests. The basic amino acid-modified surface-based pH monitoring sensor was workable (sensitivity 20 mV pH-1) under various pH and bacterial contamination conditions. CONCLUSION: Here, we developed a biocompatible and pH-monitorable wound healing dressing with antimicrobial activity via basic amino acid-mediated surface modification, creating cationic amphiphilic surfaces. Basic amino acid-modified polyimide is promising for monitoring wounds, protecting them from microbial infection, and promoting their healing. Our findings are expected to contribute to wound management and could be expanded to various wearable healthcare devices for clinical, biomedical, and healthcare applications.

Simultaneous Screening of 322 Residual Pesticides in Fruits and Vegetables Using GC-MS/MS and Deterministic Health Risk Assessments.

The development of efficient methods for evaluating pesticide residues is essential in order to ensure the safety and quality of agricultural products since the Republic of Korea implemented the Positive List System (PLS). The objective of this research was to establish a method for the simultaneous analysis of 322 pesticide residues in fruits and vegetables (such as coffee, potato, corn, and chili pepper), using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) approach in combination with gas chromatography-tandem mass spectrometry (GC-MS/MS). This study introduces a robust, high-throughput GC-MS/MS method for screening the target pesticide residues in agricultural products, achieving the PLS criterion of 0.01 mg/kg LOQ. Despite some compounds not aligning with the CODEX recovery guideline, sufficient reproducibility was confirmed, attesting to the method's applicability in qualitative analyses. A health risk assessment conducted using estimated daily intake/acceptable daily intake ratios indicated low risks associated with product consumption (<0.035391%), thereby confirming their safety. This efficient method holds significant implications for the safe distribution of agricultural products, including during import inspections.

Resistive-switching memory effect of hybrid structures with polyimide and SnO2 nanocrystals.

Hybrid memory devices with polyimide and SnO2 nanocrystals on a flexible polyethersulphone substrate have shown a memristor behavior from current-voltage (I-V) measurements. The resistive-switching effects with a current bistability appeared during cycling voltage sweeping within the range of +/- 4 V. This I-V switching effect might have originated from a resistance fluctuation due to the charge trapping into the SnO2 nanocrystals as well as the oxygen vacancies of the ZnO layer and aluminum oxides that were formed between the polyimide and the interface of the Al gate electrode. In the bipolar resistance-switching behavior, the ratio of the high- and low-resistance state currents was about 3.7 x 10(4) at 1 V.

Pathological Evaluation of Porcine Circovirus 2d (PCV2d) Strain and Comparative Evaluation of PCV2d and PCV2b Inactivated Vaccines against PCV2d Infection in a Specific Pathogen-Free (SPF) Yucatan Miniature Pig Model.

Porcine circovirus type 2 (PCV2) is an economically important swine pathogen that causes porcine circovirus-associated diseases (PCVADs). The objective of this study was to evaluate the use of specific pathogen-free Yucatan miniature pigs (YMPs) as an experimental model for PCV2d challenge and vaccine assessment because PCV2-negative pigs are extremely rare in conventional swine herds in Korea. In the first experiment, every three pigs were subjected to PCV2d field isolate or mock challenge. During three weeks of experiments, the PCV2d infection group exhibited clinical outcomes of PCVAD with high viral loads, lymphoid depletion, and detection of PCV2d antigens in lymphoid organs by immunohistochemistry. In the second experiment, three groups of pigs were challenged with PCV2d after immunization for three weeks: a nonvaccinated group (three pigs), a PCV2b-Vac group vaccinated with a commercial PCV2b-based inactivated vaccine SuiShot® Circo-ONE (five pigs), and a PCV2d-Vac group vaccinated with an experimental PCV2d-based inactivated vaccine (five pigs). During the three weeks of the challenge period, nonvaccinated pigs showed similar clinical outcomes to those observed in the PCV2d infection group from the first experiment. In contrast, both the PCV2b and PCV2d vaccinations produced good levels of protection against PCV2d challenge, as evidenced by reduced viral loads, improved growth performance, high virus-neutralizing antibody titers, and less development of PCV2-associated pathological lesions. Taken together, these data suggest that YMPs could be an alternative model for PCV2 challenge experiments, and these animals displayed typical clinical and pathological features and characteristics of protective immunity induced by the vaccines that were consistent with those resulting from PCV2 infections in conventional pigs.

Transparent, Robust, and Photochemical Antibacterial Surface Based on Hydrogen Bonding between a Si-Al and Cationic Dye.

Healthcare-associated infections can occur and spread through direct contact with contaminated fomites in a hospital, such as mobile phones, tablets, computer keyboards, doorknobs, and other surfaces. Herein, this study shows a transparent, robust, and visible light-activated antibacterial surface based on hydrogen bonds between a transparent silica-alumina (Si-Al) sol-gel and a visible light-activated photosensitizer, such as crystal violet (CV). The study of the bonding mechanisms revealed that hydrogen bonding predominantly occurs between the N of CV and Al-OH. Apart from CV, Si-Al can be combined with a variety of dyes, highlighting its potential for wide application. The Si-Al@CV film selectively generates singlet oxygen using ambient visible light, triggering potent photochemical antibacterial performance against Gram-positive and Gram-negative bacteria. Additionally, the Si-Al@CV film is stable even after mechanical stability tests such as tape adhesion, scratch, bending, and water immersion. In vitro cytotoxicity tests using C2C12 myoblast cells showed that the Si-Al@CV film is a biocompatible material. This work suggests a new approach for designing a transparent and robust touchscreen surface with photochemical antibacterial capability against healthcare-associated infections.

Amino acid-mediated negatively charged surface improve antifouling and tribological characteristics for medical applications.

To prevent infections associated with biomedical catheters, various antimicrobial coatings have been investigated. However, those materials do not provide consistent antibacterial effects or biocompatibility, generally, due to degradation of the coating materials, in vivo. Additionally, biomedical catheters must have low surface friction to reduce tribological damage. In this study, we developed an antifouling surface composed of biocompatible amino acids (leucine, taurine, and aspartic acid) on polyimide, via modification using a series of facile immersion steps with waterborne reactions. The naturally derived amino acid could be formed highly biostable amide bonds on the polyimide surface like peptides. The amino acid-modified surface formed a water layer with antifouling performance through the hydrophilic properties of amino acids. Amino acid-mediated modification reduced adhesion up to 84.45% and 94.81% against Escherichia coli and Staphylococcus epidermidis, respectively, and exhibited an excellent prevention to adhesion against the proteins, albumin and fibrinogen. Evaluation of the surface friction of the catheter revealed a dramatic reduction in the tribological force after amino acid modification on polyimide that of 0.81 N to aspartic acid of 0.44 N. These results clearly demonstrate a reduced occurrence of infections, thrombi and tribological damage following the relatively facile surface modification of catheters. The proposed modification method can be used in a continuous manufacturing process via using the same time of modification steps for the easy producing the product. Moreover, the method uses biocompatible naturally derived materials and can be applied to medical equipment that requires biocompatibility and biofunctionality with polyimide surfaces.

Nonvolatile memory characteristics of WSi2 nanocrystals embedded in SiO2 dielectrics.

A nano-floating gate capacitor with WSi2 nanocrystals embedded in SiO2 dielectrics was fabricated. The WSi2 nanocrystals were created from ultrathin WSi2 film during rapid thermal annealing process and their average size and density were about 2.5 nm and 3.59 x 10(12) cm(-2), respectively. The flat-band voltage shift due to the carrier charging effect of WSi2 nanocrystals were measured up to 5.9 V when the gate voltage sweep in the range of +/- 9 V. The memory window was decreased from 3.7 V to 1.9 V after 1 h and remained about 3.7 V after 10(5) programming/erasing cycles. These results show that there is a possibility for the WSi2 nanocrystals to be applied to nonvolatile memory devices.

Nonvolatile-memory characteristics of SiC nanocrystals with variable oxide thickness and crested tunnel barriers.

The electrical characteristics of SiC nanocrystal nonvolatile-memory devices with variable oxide and crested tunnel barriers consisting of a SiO2/Si3N4/SiO2 (ONO) and a Si3N4/SiO2/Si3N4 (NON) layer, respectively, were investigated. The equivalent oxide thickness of the ONO and NON tunnel barriers were about 5.6 nm and 5.2 nm, respectively. When the +/- 13 V bias voltage was applied for 500 ms, the threshold voltage shifts of the SiC-nanocrystal-embedded memory devices with ONO and NON tunnel barriers were about 2.4 V. The operation speeds of the memories with ONO and NON tunnel barriers under the +/- 10 V applied pulse bias were approximately 5 and 20 ms, respectively. The field sensitivity of the ONO tunnel barrier was higher than that of the NON tunnel barrier during electron injection. The tunneling efficiency during the programming/erasing processes could be improved by the engineered tunnel barrier layer. Therefore, the SiC-nanocrystal-embedded memory device with an ONO tunnel barrier can be applied to nonvolatile-memory devices.