Multivariate biophysical markers predictive of mesenchymal stromal cell multipotency.

The capacity to produce therapeutically relevant quantities of multipotent mesenchymal stromal cells (MSCs) via in vitro culture is a common prerequisite for stem cell-based therapies. Although culture expanded MSCs are widely studied and considered for therapeutic applications, it has remained challenging to identify a unique set of characteristics that enables robust identification and isolation of the multipotent stem cells. New means to describe and separate this rare cell type and its downstream progenitor cells within heterogeneous cell populations will contribute significantly to basic biological understanding and can potentially improve efficacy of stem and progenitor cell-based therapies. Here, we use multivariate biophysical analysis of culture-expanded, bone marrow-derived MSCs, correlating these quantitative measures with biomolecular markers and in vitro and in vivo functionality. We find that, although no single biophysical property robustly predicts stem cell multipotency, there exists a unique and minimal set of three biophysical markers that together are predictive of multipotent subpopulations, in vitro and in vivo. Subpopulations of culture-expanded stromal cells from both adult and fetal bone marrow that exhibit sufficiently small cell diameter, low cell stiffness, and high nuclear membrane fluctuations are highly clonogenic and also exhibit gene, protein, and functional signatures of multipotency. Further, we show that high-throughput inertial microfluidics enables efficient sorting of committed osteoprogenitor cells, as distinct from these mesenchymal stem cells, in adult bone marrow. Together, these results demonstrate novel methods and markers of stemness that facilitate physical isolation, study, and therapeutic use of culture-expanded, stromal cell subpopulations.

Cell-assembled graphene biocomposite for enhanced chondrogenic differentiation.

Graphene-based nanomaterials are increasingly being explored for use as biomaterials for drug delivery and tissue engineering applications due to their exceptional physicochemical and mechanical properties. However, the two-dimensional nature of graphene makes it difficult to extend its applications beyond planar tissue culture. Here, graphene-cell biocomposites are used to pre-concentrate growth factors for chondrogenic differentiation. Bone marrow-derived mesenchymal stem cells (MSCs) are assembled with graphene flakes in the solution to form graphene-cell biocomposites. Increasing concentrations of graphene (G) and porous graphene oxide (pGO) are found to correlate positively with the extent of differentiation. However, beyond a certain concentration, especially in the case of graphene oxide, it will lead to decreased chondrogenesis due to increased diffusional barrier and cytotoxic effects. Nevertheless, these findings indicate that both G and pGO could serve as effective pre-concentration platforms for the construction of tissue-engineered cartilage and suspension-based cultures in vitro.

High-performance graphene-titania platform for detection of phosphopeptides in cancer cells.

Phosphopeptides play a crucial role in many biological processes and constitute some of the most powerful biomarkers in disease detection. However they are often present in very low concentration, which makes their detection highly challenging. Here, we demonstrate the use of a solution-dispersible graphene-titania platform for the selective extraction of phosphopeptides from peptide mixtures. This is followed by direct analysis by surface-enhanced laser desorption/ionization time-of-flight mass spectrometry (SELDI-TOF MS). The efficient charge and energy exchange between graphene and TiO(2) during laser irradiation in SELDI-TOF MS promotes the soft ionization of analytes and affords a detection limit in the attomole range, which is 10(2)-10(5) more sensitive than conventional platforms. The graphene-titania platform can also be used for detecting phosphopeptides in cancer cells (HeLa cells), where it shows high specificity (94%). An expanded library of 967 unique phosphopeptides is detected using significantly reduced loading of extraction matrixes compared to conventional TiO(2) bead-based assays.

Highly wrinkled cross-linked graphene oxide membranes for biological and charge-storage applications.

Inspired by the amphiphilicity of graphene oxide (GO), the surface of water is used as a template for the assembly of a GO film. Methacrylate-functionalized GO sheets can be cross-linked instantaneously at the water-air interface to form a highly wrinkled membrane spreading over an extended area. The multiple covalent linkages amongst the GO sheets enhances the in-plane stiffness of the film compared to noncovalently bonded GO films. The highly convoluted GO membrane can be used in two applications: the promoting of spontaneous stem-cell differentiation towards bone cell lineage without any chemical inducers, and for supercapacitor electrodes. Due to reduced van der Waals restacking, capacitance values up to 211 F g(-1) can be obtained. The scalable and inexpensive nature of this assembly route enables the engineering of membranes for applications in regenerative medicine and energy-storage devices where secondary structures like nanotopography and porosity are important performance enhancers.

Bio-electrospraying: A potentially safe technique for delivering progenitor cells.

Bio-electrospraying is fast becoming an attractive tool for in situ cell delivery into scaffolds for tissue engineering applications, with several cell types been successfully electrosprayed. Bone marrow derived mesenchymal progenitor/stem cells (BMSC), which are an important cell source for tissue engineering, have not been explored in detail and the effect of electrospraying on their "stemness" is not known. This study therefore investigates the effects of electrospraying on BMSC viability, proliferation, and multilineage differentiation potential. Electrospraying a BMSC suspension at flow rate of 6 mL/h and voltages of 7.5-15 kV could successfully generate a continuous, stable and linearly directed electrospray of cells. Morphological observation, trypan blue tests and alamar blue based metabolic assays revealed about 88% of these electrosprayed cells were viable, and proliferated at rates similar to native BMSCs. However, at higher voltages, electrospraying became unstable and reduced cell viability, possibly due to electrical or thermal damage to the cells. BMSCs electrosprayed at 7.5 kV also retained their multipotency and could be successfully differentiated into adipogenic, chondrogenic, and osteogenic lineages, demonstrating similar morphology and gene expression levels as induced native BMSCs. These results indicate that bio-electrospraying could be safely used as a progenitor/stem cell delivery technique for tissue engineering and regenerative medicine applications.

When stem cells meet graphene: Opportunities and challenges in regenerative medicine.

Recent advances in stem cell research and nanotechnology have significantly influenced the landscape of tissue engineering and regenerative medicine. Precise and reproducible control of the fate of stem cells and their lineage specification have, therefore, become more crucial than ever for the success of stem cell-based technologies. Extensive research has been geared towards developing materials that are capable of mimicking the physiological microenvironment of stem cells and at the same time, controlling their eventual fate. An interesting example of these materials is two-dimensional graphene and its related derivatives. A high specific surface area coupled with superior chemical stability, biocompatibility, and flexibility in functionalization render graphene-based nanomaterials one of the most exciting platforms for tissue engineering and regenerative medicine applications, especially for stem cell growth, proliferation, and differentiation. In this review, we discuss the love-hate relationship between stem cells and graphene-based nanomaterials in tissue engineering and regenerative medicine. We first discuss the role and importance of stem cells in tissue engineering and regenerative medicine. We then highlight the use of nanomaterials for stem cell control, the interaction between stem cells and graphene nanomaterials as well as their biocompatibility, biodistribution, and biodegradability considerations. We also offer our perspectives on the various challenges and opportunities facing the use of graphene and its derivatives for stem cell growth and differentiation.

Bone marrow regeneration promoted by biophysically sorted osteoprogenitors from mesenchymal stromal cells.

Human tissue repair deficiencies can be supplemented through strategies to isolate, expand in vitro, and reimplant regenerative cells that supplant damaged cells or stimulate endogenous repair mechanisms. Bone marrow-derived mesenchymal stromal cells (MSCs), a subset of which is described as mesenchymal stem cells, are leading candidates for cell-mediated bone repair and wound healing, with hundreds of ongoing clinical trials worldwide. An outstanding key challenge for successful clinical translation of MSCs is the capacity to produce large quantities of cells in vitro with uniform and relevant therapeutic properties. By leveraging biophysical traits of MSC subpopulations and label-free microfluidic cell sorting, we hypothesized and experimentally verified that MSCs of large diameter within expanded MSC cultures were osteoprogenitors that exhibited significantly greater efficacy over other MSC subpopulations in bone marrow repair. Systemic administration of osteoprogenitor MSCs significantly improved survival rates (>80%) as compared with other MSC subpopulations (0%) for preclinical murine bone marrow injury models. Osteoprogenitor MSCs also exerted potent therapeutic effects as "cell factories" that secreted high levels of regenerative factors such as interleukin-6 (IL-6), interleukin-8 (IL-8), vascular endothelial growth factor A, bone morphogenetic protein 2, epidermal growth factor, fibroblast growth factor 1, and angiopoietin-1; this resulted in increased cell proliferation, vessel formation, and reduced apoptosis in bone marrow. This MSC subpopulation mediated rescue of damaged marrow tissue via restoration of the hematopoiesis-supporting stroma, as well as subsequent hematopoiesis. Together, the capabilities described herein for label-freeisolation of regenerative osteoprogenitor MSCs can markedly improve the efficacy of MSC-based therapies.

High-throughput synchronization of mammalian cell cultures by spiral microfluidics.

The development of mammalian cell cycle synchronization techniques has greatly advanced our understanding of many cellular regulatory events and mechanisms specific to different phases of the cell cycle. In this chapter, we describe a high-throughput microfluidic-based approach for cell cycle synchronization. By exploiting the relationship between cell size and its phase in the cell cycle, large numbers of synchronized cells can be obtained by size fractionation in a spiral microfluidic channel. Protocols for the synchronization of primary cells such as mesenchymal stem cells, and immortal cell lines such as Chinese hamster ovarian cells (CHO-CD36) and HeLa cells are provided as examples.

Slanted spiral microfluidics for the ultra-fast, label-free isolation of circulating tumor cells.

The enumeration and characterization of circulating tumor cells (CTCs), found in the peripheral blood of cancer patients, provide a potentially accessible source for cancer diagnosis and prognosis. This work reports on a novel spiral microfluidic device with a trapezoidal cross-section for ultra-fast, label-free enrichment of CTCs from clinically relevant blood volumes. The technique utilizes the inherent Dean vortex flows present in curvilinear microchannels under continuous flow, along with inertial lift forces which focus larger CTCs against the inner wall. Using a trapezoidal cross-section as opposed to a traditional rectangular cross-section, the position of the Dean vortex core can be altered to achieve separation. Smaller hematologic components are trapped in the Dean vortices skewed towards the outer channel walls and eventually removed at the outer outlet, while the larger CTCs equilibrate near the inner channel wall and are collected from the inner outlet. By using a single spiral microchannel with one inlet and two outlets, we have successfully isolated and recovered more than 80% of the tested cancer cell line cells (MCF-7, T24 and MDA-MB-231) spiked in 7.5 mL of blood within 8 min with extremely high purity (400-680 WBCs mL(-1); ~4 log depletion of WBCs). Putative CTCs were detected and isolated from 100% of the patient samples (n = 10) with advanced stage metastatic breast and lung cancer using standard biomarkers (CK, CD45 and DAPI) with the frequencies ranging from 3-125 CTCs mL(-1). We expect this simple and elegant approach can surmount the shortcomings of traditional affinity-based CTC isolation techniques as well as enable fundamental studies on CTCs to guide treatment and enhance patient care.

Onset of heterogeneity in culture-expanded bone marrow stromal cells.

Inconsistencies among in vitro and in vivo experiments using adult mesenchymal stem cells (MSCs) confound development of therapeutic, regenerative medicine applications, and in vitro expansion is typically required to achieve sufficient cell numbers for basic research or clinical trials. Though heterogeneity in both morphology and differentiation capacity of culture-expanded cells is noted, sources and consequences are not well understood. Here, we endeavored to observe the onset of population heterogeneity by conducting long-term continuous in vitro observation of human adult bone marrow stromal cell (BMSC) populations, a subset of which has been shown to be stem cells (also known as bone marrow-derived MSCs). Semi-automated identification and tracking of cell division and migration enabled construction of cell lineage maps that incorporated cell morphology. We found that all BMSCs steadily grew larger over time; this growth was interrupted only when a cell divided, producing two equally sized, morphologically similar daughter cells. However, a finite probability existed that one or both of these daughters then continued to increase in size without dividing, apparently exiting the cell cycle. Thus, larger BMSCs are those cells that have exited the normal cell cycle. These results hold important implications for MSC in vitro culture expansion and biophysical sorting strategies.

Fluorinated graphene for promoting neuro-induction of stem cells.

Surface engineering of substrates offers the possibility of controlling the physiological functions of cells at the molecular level. Fluorinated graphene promotes the differentiation of MSCs towards neuronal lineages. Cell alignment using printed polydimethylsiloxane channel arrays on fluorinated graphene further enhances the neuro-induction of MSCs even in the absence of chemical inducers.

High-throughput cell cycle synchronization using inertial forces in spiral microchannels.

Efficient synchronization and selection of cells at different stages of the cell replication cycle facilitates both fundamental research and development of cell cycle-targeted therapies. Current chemical-based synchronization methods are unfavorable as these can disrupt cell physiology and metabolism. Microfluidic systems developed for physical cell separation offer a potential alternative over conventional cell synchronization approaches. Here we introduce a spiral microfluidic device for cell cycle synchronization, using the combined effects of inertial forces and Dean drag force. By exploiting the relationship between cell diameter and cell cycle (DNA content/ploidy), we have successfully fractionated several asynchronous mammalian cell lines, as well as primary cells comprising bone marrow-derived human mesenchymal stem cells (hMSCs), into enriched subpopulations of G0/G1 (>85%), S, and G2/M phases. This level of cell cycle enrichment is comparable to existing microfluidic systems, but the throughput (∼ 15 × 10(6) cells per h) and viability (∼ 95%) of cells thus synchronized are significantly greater. Further, this platform provides rapid collection of synchronized cells or of diameter-sorted cells post-separation, to enable diverse applications in the study and manipulation of cell proliferation.

Origin of enhanced stem cell growth and differentiation on graphene and graphene oxide.

The culture of bone marrow derived mesenchymal stem cells (MSCs), as well as the control of its differentiation toward different tissue lineage, is a very important part of tissue engineering, where cells are combined with artificial scaffold to regenerate tissues. Graphene (G) and graphene oxide (GO) sheets are soft membranes with high in-plane stiffness and can potentially serve as a biocompatible, transferable, and implantable platform for stem cell culture. While the healthy proliferation of stem cells on various carbon platforms has been demonstrated, the chemical role of G and GO, if any, in guiding uncommitted stem cells toward differentiated cells is not known. Herein, we report that the strong noncovalent binding abilities of G allow it to act as a preconcentration platform for osteogenic inducers, which accelerate MSCs growing on it toward the osteogenic lineage. The molecular origin of accelerated differentation is investigated by studying the binding abilities of G and GO toward different growth agents. Interestingly, differentiation to adipocytes is greatly suppressed on G because insulin, which is a key regulator for the synthesis of fatty acids, is denatured upon π-π adsorption on G; in contrast, GO does not interfere with adipogenesis due to electrostatic binding with insulin. The different binding interactions and their subsequent influence on stem cell growth and differentiation are ascribed to different degrees of π-π stacking and electrostatic and hydrogen bonding mediated by G and GO.