Accumulation, Directional Delivery and Release of Nanoparticles along a Nanofiber.

Controllably accumulating and delivering nanoparticles (NPs) into specific locations are a central theme of nano-engineering and important for targeted therapy or bacteria removal. Here we present a technique allowing bidirectional accumulation, directional delivery and release of nanoparticles through two 980-nm-wavelength counter-propagating evanescent waves in an optical nanofiber (NF). Using 713-nm-diameter polystyrene NPs suspension and an 890-nm-diameter NF as an example, we experimentally and theoretically demonstrate that the NPs delivered along the NF surface in opposite directions are accumulated into the region where the scattering loss of the NPs is maximum, and about 90% of the incident optical field from both ends of the NF can be coupled into the region. Moreover, the accumulation region can be controlled by altering the incident optical power ratio of the two counter-propagating laser beams, while the accumulated NPs can be delivered and then released into the specific locations by turning off the two lasers.

Temperature-dependent Förster resonance energy transfer from upconversion nanoparticles to quantum dots.

The Förster resonance energy transfer (FRET) from the ß-NaYF4:Yb3+, Er3+/NaYF4 upconversion nanoparticles (UCNPs) to ZnCdSe/ZnS quantum dots (QDs) as a function of temperature (77-427 K) is demonstrated. With an increasing of temperature, both the intensity and peak position of QDs emission variated, which is attributed to the combining of the FRET and thermal quenching effect. By analyzing the dependence of the photoluminescence (PL) spectra on temperature, the UCNP + QD sample can be considered as dual thermal probes with high sensitivity based on either the UCL or the spectral shift of QD emission under 980 nm excitation. The lifetime of the UCNP and UCNP + QD samples are collected to investigate the dynamics of the FRET at various temperatures, showing a decrease and then an increase of the FRET efficiency from UCNPs to QDs with temperature from 77 to 427 K. This result is mainly attributed to the variation of the Förster distance R0 with the increasing of temperature. The work will be significant to detect the nanoscale interaction and it can be widely applied in biomedical, sensing and imaging.

Backward transport of nanoparticles in fluidic flow.

We demonstrate a backward transport of polystyrene (PS) particles (713-nm in diameter) in a pressure-driven fluidic flow using an optical fiber with a diameter of 710 nm. When a light of 980-nm wavelength was launched into the fiber in the opposite direction of the flow, the PS particles near the fiber were attracted onto the fiber and transported along the propagation direction of the light. The relationship between the velocity of the transported PS particles and the velocity of the flow at different input optical powers was investigated. Numerical analyses on both the optical field and the fluid field were carried out. The particle-size dependence of backward transport capability has also been investigated.

Particle separation in fluidic flow by optical fiber.

We report a separation of two different size particles in fluidic flow by an optical fiber. With a light of 1.55 µm launched into the fiber, particles in stationary water were massively trapped and assembled around the fiber by a negative photophoretic force. By introducing a fluidic flow, the assembled particles were separated into two different downstream positions according to their sizes by the negative photophoretic force and the dragging force acted on the particles. The intensity distribution of light leaked from the fiber and the asymmetry factor of energy distribution have been analysed as crucial factors in this separation. Poly(methyl methacrylate) particles (5-/10-µm diameter), SiO(2) particles (2.08-/5.65-µm diameter), and SiO(2) particles (2.08-µm diameter) mixed with yeast cells were used to demonstrate the effectiveness of the separation. The separation mechanism has also been numerical simulated and theoretical interpreted.

Growth of well-arrayed ZnO nanorods on thinned silica fiber and application for humidity sensing.

Thinned silica fibers were fabricated by drawing conventional single mode silica fiber through flame heated method and well-arrayed ZnO nanorods were grown on the thinned silica fibers by a hydrothermal method. The structure enables efficient light coupling between the fiber and the nanorods. With the unique property of high surface to volume ratio of one-dimensional ZnO nanorods, light coupled to nanorods array enhances the optical interaction between the device and the ambient environment. Sensitive humidity sensor was demonstrated by launching laser into ZnO nanorod-covered fibers. Theoretical and experimental results are presented.

Optically controlled coalescence and splitting of femtoliter/picoliter droplets for microreactors.

Microreactor technology has attracted tremendous interest due to its features of a large specific surface area, low consumption of reagents and energy, and flexible control of the reaction process. As most of the current microreactors have volumes of microliters or even larger, effective methods to reduce the microreactors' sizes and improve their flexibility and controllability have become highly demanded. Here we propose an optical method of coalescence and splitting of femto-/pico-liter droplets for application in microreactors. Firstly, two different schemes are adopted to stably trap and directionally transport the microdroplets (oil and water) by a scanning optical tweezing system. Then, optically controlled coalescence and splitting of the microdroplets are achieved on this basis, and the mechanism and conditions are explored. Finally, the microdroplets are used as microreactors to conduct the microreactions. Such microreactors combine the advantages of miniaturization and the multi-functions of microdroplets, as well as the precision, flexibility, and non-invasiveness of optical tweezers, holding great potential for applications in materials synthesis and biosensing.

Manipulation of a Single Metal Nanowire by an Unpolarized Gaussian Beam.

Optical manipulation of metal nanowires offers a promising route to building optoelectronic nanosystems, which remains a challenge because of their strong absorption or scattering properties. Here, precise optical manipulation of a single Ag nanowire, including capture, translation, rotation, immobilization, and release, was readily achieved within a large operation range of 100 µm by a single unpolarized Gaussian beam based on an optical scattering force. Besides, the optical forces and torques exerted on the Ag nanowires under different conditions were quantitatively analyzed and calculated by simulation to give insight into the manipulation mechanism. This proposed scattering-force-based optical manipulation method also has great position and orientation stability with a capture stiffness of 1.2 pN/µm and an orientation standard deviation of 0.3°. More surprisingly, it is independent of both laser polarization and the metal material, shape, and size and is a universal and promising strategy for the manipulation and assembly of nontransparent structures in mesoscopic/Mie sizes.

Metal-Nanostructure-Decorated Spider Silk for Highly Sensitive Refractive Index Sensing.

Highly sensitive detection of refractive index (RI) is essential for the analysis of the bio-microenvironment and basic cellular reactions. To achieve this, optic-fiber RI sensors based on localized surface plasmon resonance (LSPR) have been widely used for their flexibility and high sensitivity. However, the current optic-fiber RI sensors are mainly fabricated using glass, which makes them face the challenges in biocompatibility and biosafety. In this work, a RI sensor with high sensitivity is fabricated using metal-nanostructure-decorated spider silk. The spider silk, which is directly dragged from Araneus ventricosus, is natural protein-based biopolymer with low attenuation, good biocompatibility and biodegradability, large RI, great flexibility, and easy functionalization. Hence, the spider silk can be an ideal alternative to glass for sensing in biological environments with a wide RI range. Different kinds of metal nanostructures, such as gold nanorods (GNRs), gold nanobipyramids (GNBP), and Ag@GNRs, are decorated on the surface of the spider silk utilizing the surface viscidity of the silk. By directing a beam of white light into the spider silk, the LSPR of the metal nanostructures was excited and a highly sensitive RI sensing (the highest sensitivity of 1746 nm per refractive index was achieved on the GNBP-decorated spider silk) was obtained. This work may pave a new way to precise and sensitive biosensing and bioanalysis.

Bio-compatible miniature viscosity sensor based on optical tweezers.

Viscosity is a fundamental biomechanical parameter related to the function and pathological status of cells and tissues. Viscosity sensing is of vital importance in early biomedical diagnosis and health monitoring. To date, there have been few methods of miniature viscosity sensing with high safety, flexible controllability, and excellent biocompatibility. Here, an indirect optical method combining the significant advantages of both optical tweezers and microflows has been presented in this paper to construct a cellular micromotor-based viscosity sensor. Optical tweezers are used to drive a yeast cell or biocompatible SiO2 particle to rotate along a circular orbit and thus generate a microvortex. Another target yeast cell in the vortex center can be controllably rotated under the action of viscous stress to form a cellular micromotor. As the ambient viscosity increases, the rotation rate of the micromotor is reduced, and thus viscosity sensing is realized by measuring the relationship between the two parameters. The proposed synthetic material-free and fuel-free method is safer, more flexible, and biocompatible, which makes the cellular micromotor-based viscosity sensor a potential detector of the function and pathological status of cells and tissues in vivo without introducing any exogenous cells.

Colossal Room-Temperature Terahertz Topological Response in Type-II Weyl Semimetal NbIrTe4.

The electromagnetic spectrum between microwave and infrared light is termed the "terahertz (THz) gap," of which there is an urgent lack of feasible and efficient room-temperature (RT) THz detectors. Type-II Weyl semimetals (WSMs) have been predicted to host significant RT topological photoresponses in low-frequency regions, especially in the THz gap, well addressing the shortcomings of THz detectors. However, such devices have not been experimentally realized yet. Herein, a type-II WSM (NbIrTe4 ) is selected to fabricate THz detector, which exhibits a photoresponsivity of 5.7 × 104  V W-1 and a one-year air stability at RT. Such excellent THz-detection performance can be attributed to the topological effect of type-II WSM in which the effective mass of photogenerated electrons can be reduced by the large tilting angle of Weyl nodes to further improve mobility and photoresponsivity. Impressively, this device shows a giant intrinsic anisotropic conductance (σmax /σmin  = 339) and THz response (Iph-max /Iph-min  = 40.9), both of which are record values known. The findings open a new avenue for the realization of uncooled and highly sensitive THz detectors by exploring type-II WSM-based devices.

Photothermal trapping of dielectric particles by optical fiber-ring.

The removal of dielectric particles and bacteria from water is an extremely important global issue, particularly, for drinking and sanitation. This work provides a demonstration of optical purification of water using an optical fiber-ring. The size of particles suspended in water for trapping is 2.08 µm in diameter and the wavelength of light used for inducing photothermal effect is 1.55 µm with a power of 97 mW. The fiber, 6 µm in diameter, was formed to a racket-shaped ring with a minimum diameter of 167 µm and a maximum one of 350 µm. Experiment indicates that the particles moved toward the ring with the highest velocity of 4.2 µm/s and are trapped/assembled in the center of the ring once the laser beam of 1.55-µm wavelength was launched into the fiber. With a moving of the fiber-ring, the trapped/assembled particles were moved and the water can be purified by removal of the particles.

Single Polylactic Acid Nanowire for Highly Sensitive and Multifunctional Optical Biosensing.

Nanowire-based optical biosensors with high sensitivity are highly desired for the detection of biological microenvironments and analysis of cellular processes. However, the current nanowire biosensors are mostly fabricated with metal and semiconductor materials, which are not suitable for long-term use in biological environments due to their incompatible and nondegradable properties. Biosensors based on biofriendly materials (e.g., spider silk) often do not have high enough sensitivity due to high losses or micron sizes. Here, polylactic acid (PLA), a polymer with high optical transparency, good biocompatibility, biodegradability, and flexibility, is used to fabricate nanowires using a directly drawing method for the first time. Because of the strong evanescent wave and abundant carboxyl groups on the surface of nanowires, an ultralow concentration sensing of cytochrome c is achieved with a limit of detection of 1.38 × 10-17 M, which is much lower than other detection results using semiconductor/metal-based nanosensors (10-6 to 10-12 M). On this basis, a label-free and real-time monitoring of cell apoptosis is realized. In addition, by doping quantum dots, the functionalized PLA nanowires can also sense a change in pH. These results are suggestive of the potential for PLA nanowires applied in multifunctional biosensing and biodetection, pushing forward the photomedicine field.

Penta-PdPSe: A New 2D Pentagonal Material with Highly In-Plane Optical, Electronic, and Optoelectronic Anisotropy.

Due to their low-symmetry lattice characteristics and intrinsic in-plane anisotropy, 2D pentagonal materials, a new class of 2D materials composed entirely of pentagonal atomic rings, are attracting increasing research attention. However, the existence of these 2D materials has not been proven experimentally until the recent discovery of PdSe2 . Herein, penta-PdPSe, a new 2D pentagonal material with a novel low-symmetry puckered pentagonal structure, is introduced to the 2D family. Interestingly, a peculiar polyanion of [SePPSe]4- is discovered in this material, which is the biggest polyanion in 2D materials yet discovered. Strong intrinsic in-plane anisotropic behavior endows penta-PdPSe with highly anisotropic optical, electronic, and optoelectronic properties. Impressively, few-layer penta-PdPSe-based phototransistor not only achieves excellent electronic performances, a moderate electron mobility of 21.37 cm2 V-1 s-1 and a high on/off ratio of up to 108 , but it also has a high photoresponsivity of ≈5.07 × 103 A W-1 at 635 nm, which is ascribed to the photogating effect. More importantly, penta-PdPSe also exhibits a large anisotropic conductance (σmax /σmax  = 3.85) and responsivity (Rmax /Rmin  = 6.17 at 808 nm), superior to most 2D anisotropic materials. These findings make penta-PdPSe an ideal material for the design of next-generation anisotropic devices.

Fluorescence enhancement based on cooperative effects of a photonic nanojet and plasmon resonance.

Developing a universal and simple structure with an excellent fluorescence enhancement is a highly desirable goal for practical applications in optical detection and imaging. Herein, a hybrid structure composed of melamine-formaldehyde (MF) microspheres covering an Au nanorod (AuNR) film (MS/AuNR for short) is reported to enhance fluorescence, which is based on the cooperative effects of a photonic nanojet and plasmon resonance. Moreover, to obtain an excellent plasmonic property, an additional poly(methyl methacrylate) (PMMA) spacing layer with an optimal thickness of 8 nm is added to prevent the fluorescence from directly coming in contact with the AuNR film. Using the proposed hybrid structure and taking the quantum dots (QDs) as fluorescent materials, a maximum enhancement of fluorescence of up to 260 fold is measured. Besides, the hybrid structure is also applied in fluorescence imaging. Utilizing the fluorescence enhancement and pattern magnification effects of the hybrid structure, clear imaging of the 100 nm fluorescent particles is achieved. The above results have important academic value and application prospects in many fields such as weak fluorescence detection and nano-fluorescence imaging.

Sizing and identification of nanoparticles by a tapered fiber.

There is a strong desire for sizing and identification of nanoparticles in fields of advanced nanotechnology and environmental protection. Although existing approaches can size the nanoparticles, or identify nanoparticles with different refractive indexes, a fast and simple method that combines the two functions still remains challenges. Here, we propose a versatile optical method to size and identify nanoparticles using an optical tapered fiber. By detecting reflection signals in real time, 400-600 nm SiO2 nanoparticles can be sized and 500 nm SiO2, PMMA, PS nanoparticles can be identified. This method requires only an optical tapered fiber, avoiding the use of elaborate nanostructures and making the device highly autonomous, flexible and compact. The demonstrated method provides a potentially powerful tool for biosensing, such as identification of nano-contaminant particles and biological pathogens.

Living Nanospear for Near-Field Optical Probing.

Optical nanoprobes, designed to emit or collect light in the close proximity of a sample, have been extensively used to sense and image at nanometer resolution. However, the available nanoprobes, constructed from artificial materials, are incompatible and invasive when interfacing with biological systems. In this work, we report a fully biocompatible nanoprobe for subwavelength probing of localized fluorescence from leukemia single-cells in human blood. The bioprobe is built on a tapered fiber tip apex by optical trapping of a yeast cell (1.4 µm radius) and a chain of Lactobacillus acidophilus cells (2 µm length and 200 nm radius), which act as a high-aspect-ratio nanospear. Light propagating along the bionanospear can be focused into a spot with a full width at half-maximum (fwhm) of 190 nm on the surface of single cells. Fluorescence signals are detected in real time at subwavelength spatial resolution. These noninvasive and biocompatible optical probes will find applications in imaging and manipulation of biospecimens.

Plasmon-Induced Selective Enhancement of Green Emission in Lanthanide-Doped Nanoparticles.

By introducing an 18 nm thick Au nanofilm, selective enhancement of green emission from lanthanide-doped (ß-NaYF4:Yb3+/Er3+) upconversion nanoparticles (UCNPs) is demonstrated. The Au nanofilm is deposited on a microfiber surface by the sputtering method and then covered with the UCNPs. The plasma on the surface of the Au nanofilm can be excited by launching a 980 nm wavelength laser beam into the microfiber, resulting in an enhancement of the local electric field and a strong thermal effect. A 36-fold luminescence intensity enhancement of the UCNPs at 523 nm is observed, with no obvious reduction in the photostability of the UCNPs. Further, the intensity ratios of the emissions at 523-545 nm and at 523-655 nm are enhanced with increasing pump power, which is attributed to the increasing plasmon-induced thermal effect. Therefore, the fabricated device is further demonstrated to exhibit an excellent ability in temperature sensing. By controlling the pump power and the UCNP concentration, a wide temperature range (325-811 K) and a high temperature resolution (0.035-0.046 K) are achieved in the fabricated device.

Enhancing Upconversion Fluorescence with a Natural Bio-microlens.

Upconversion fluorescence has triggered extensive efforts in the past decade because of its superior physicochemical features and great potential in biomedical and biophotonic studies. However, practical applications of upconversion fluorescence are often hindered by its relatively low luminescence efficiency (<1%). Here, we employ a living yeast or human cell as a natural bio-microlens to enhance the upconversion fluorescence. The natural bio-microlens, which was stably trapped on a fiber probe, could concentrate the excitation light into a subwavelength region so that the upconversion fluorescence of core-shell NaYF4:Yb3+/Tm3+ nanoparticles was enhanced by 2 orders of magnitude. As a benefit of the fluorescence enhancement, single-cell imaging and real-time detection of the labeled pathogenic bacteria, such as Escherichia coli and Staphylococcus aureus, were successfully achieved in the dark fields. This biocompatible, sensitive, and miniature approach could provide a promising powerful tool for biological imaging, biophotonic sensing, and single-cell analysis.

An organic-inorganic broadband photodetector based on a single polyaniline nanowire doped with quantum dots.

The capability to detect light over a broad waveband is highly important for practical optoelectronic applications and has been achieved with photodetectors of one-dimensional inorganic nanomaterials such as Si, ZnO, and GaN. However, achieving high speed responsivity over an entire waveband within such a photodetector remains a challenge. Here we demonstrate a broadband photodetector using a single polyaniline nanowire doped with quantum dots that is highly responsive over a broadband from 350 to 700 nm. The high responsivity is due to the high density of trapping states at the enormous interfaces between polyaniline and quantum dots. The interface trapping can effectively reduce the recombination rate and enhance the efficiency for light detection. Furthermore, a tunable spectral range can be achieved by size-based spectral tuning of quantum dots. The use of organic-inorganic hybrid polyaniline nanowires in broadband photodetection may offer novel functionalities in optoelectronic devices and circuits.

Plasmon-assisted trapping of nanoparticles using a silver-nanowire-embedded PMMA nanofiber.

The integration of surface plasmon with waveguide is a strategy for lab-on-a-chip compatible optical trapping. Here, we report a method for trapping of nanoparticles using a silver nanowire (AgNW) embedded poly(methyl methacrylate) (PMMA) nanofiber with the assistance of surface plasmon polaritons (SPPs). The nanoparticles (polystyrene, 700 nm diameter) are transported along the nanofiber and ultimately trapped at the AgNW embedded region because of the enhanced optical gradient force towards the nanofiber exerted on the nanoparticles and optical potential well generated by the excitation of SPPs. The low optical power requirement and the easy fabrication of the AgNW-embedded nanofiber with broad range of wavelength for SPPs are advantageous to the applications in optofluidics and plasmofluidics.