RESUMEN
Frustrated Lewis pairs (FLPs) offer an important and promising paradigm for main group catalysis. Reported here is the use of microwave dielectric spectroscopy for the in actu detection of FLP encounter complexes. This technique focuses on the room-temperature measurement of the loss component of microwave permittivity (ε2) over the bandwidth from 0.5 to 6.8 GHz. The microwave loss measured for a Lewis pair in a toluene host solution is compared with the losses of the individual components when measured separately, and the difference in loss Δε2 is used to characterize the electrostatic interaction between the pair. The Δε2 value shows a direct correlation with an ability for the FLP encounter complex to split hydrogen gas and abstract hydrogen from γ-terpinene and has led to the identification of a novel FLP encounter complex, tris-pentafluorophenyl borane-eucalyptol pairing.
RESUMEN
Herein, we report on the translation of a small scale ball-milled amidation protocol into a large scale continuous reactive extrusion process. Critical components to the successful translation were: a) understanding how the different operating parameters of a twin-screw extruder should be harnessed to control prolonged continuous operation, and b) consideration of the physical form of the input materials. The amidation reaction is applied to 36 amides spanning a variety of physical form combinations (liquid-liquid, solid-liquid and solid-solid). Following this learning process, we have developed an understanding for the translation of each physical form combination and demonstrated a 7-hour reactive extrusion process for the synthesis of an amide on 500â gram scale (1.3â mols of product).
RESUMEN
Rapid and wide-ranging developments have established mechanochemistry as a powerful avenue in sustainable organic synthesis. This is primarily due to unique opportunities which have been offered in solvent-free - or highly solvent-minimised - reaction systems. Nevertheless, despite elegant advances in ball-milling technology, limitations in scale-up still remain. This tutorial review covers the first reports into the translation from "batch-mode" ball-milling to "flow-mode" reactive extrusion, using twin-screw extrusion.
Asunto(s)
Técnicas de Química Sintética , SolventesRESUMEN
The frustrations of precipitation, fouling and blockages of liquid-based flow reactors is familiar to all researchers that have worked with continuous flow equipment. There have been many innovative solutions to try and circumvent this issue. This short review will highlight the emerging technique of mechanochemistry and reactive extrusion as a continuous process that can directly work on solid (and liquid) materials and elicit chemical transformations.
RESUMEN
The selective and efficient C-H methylation of sp2 and sp3 carbon centres has become a powerful transformation in the synthetic toolbox. Due to the potential for profound changes to physicochemical properties attributed to the installation of a "Magic Methyl" group at a strategic site in a lead compound, such techniques have become highly desirable in modern drug discovery and synthesis programmes. This review will cover the diverse techniques that have been employed to enable the selective installation of the C-Me bond in a wide range of chemical structures, from simple building blocks to complex drug-like architectures.
Asunto(s)
Técnicas de Química Sintética , Compuestos Orgánicos/síntesis química , Metilación , Estructura Molecular , Compuestos Orgánicos/químicaRESUMEN
The nickel catalyzed Suzuki-Miyaura-type coupling of aryl sulfamates and boronic acid derivatives enabled by temperature-controlled mechanochemistry via the development of a programmable PID-controlled jar heater is reported. This base-metal-catalyzed, solvent-free, all-under-air protocol was also scaled 200-fold using twin-screw extrusion technology affording decagram quantities of material.
RESUMEN
Recent research endeavors have established that the mechanochemical activation of piezoelectric materials can open new avenues in redox chemistry. Impact forces, such as those imparted by a ball mill, have been shown to transform piezoelectric materials such as barium titanate (BaTiO3 ) into a highly polarized state, which can then donate an electron to a suitable oxidant and receive an electron from a suitable reductant, mimicking established photoredox catalytic cycles. Proof-of-concept studies have elucidated that mechanoredox chemistry holds great potential in sustainable and efficient radical-based synthesis.
Asunto(s)
CatálisisRESUMEN
The mechanochemical synthesis of 2,4,5,6-tetra(9H-carbazol-9-yl)isophthalonitrile and related organic fluorophores/photocatalysts via a solvent-minimized four-fold SNAr pathway is herein described. Employing sodium tert-butoxide as base, and negating the need for any air/moisture-sensitive reaction set-ups, a selection of organic dyes was synthesized in just 1 h using this ball-milling technique. Furthermore, the transformation was then showcased on a multigram scale.
Asunto(s)
Solventes , IonóforosRESUMEN
A reagent-controlled stereodivergent carbocyclisation of aryl aldimine-derived, photocatalytically generated, α-amino radicals possessing adjacent conjugated alkenes, affording either bicyclic or tetracyclic products, is described. Under net reductive conditions using commercial Hantzsch ester, the α-amino radical species underwent a single stereoselective cyclisation to give trans-configured amino-indane structures in good yield, whereas using a substituted Hantzsch ester as a milder reductant afforded cis-fused tetracyclic tetrahydroquinoline frameworks, resulting from two consecutive radical cyclisations. Judicious choice of the reaction conditions allowed libraries of both single and dual cyclisation products to be synthesised with high selectivity, notable predictability, and good-to-excellent yields. Computational analysis employing DFT revealed the reaction pathway and mechanistic rationale behind this finely balanced yet readily controlled photocatalytic system.
RESUMEN
The direct mechanochemical amidation of esters by ball milling is described. The operationally simple procedure requires an ester, an amine, and substoichiometric KOtBu and was used to prepare a large and diverse library of 78 amide structures with modest to excellent efficiency. Heteroaromatic and heterocyclic components are specifically shown to be amenable to this mechanochemical protocol. This direct synthesis platform has been applied to the synthesis of active pharmaceutical ingredients (APIs) and agrochemicals as well as the gram-scale synthesis of an active pharmaceutical, all in the absence of a reaction solvent.
RESUMEN
The construction of diverse sp3 -rich skeletal ring systems is of importance to drug discovery programmes and natural product synthesis. Herein, we report the photocatalytic construction of 2,7-diazabicyclo[3.2.1]octanes (bridged 1,3-diazepanes) via a reductive diversion of the Minisci reaction. The fused tricyclic product is proposed to form via radical addition to the C4 position of 4-substituted quinoline substrates, with subsequent Hantzsch ester-promoted reduction to a dihydropyridine intermediate which undergoes in situ two-electron ring closure to form the bridged diazepane architecture. A wide scope of N-arylimine and quinoline derivatives was demonstrated and good efficiency was observed in the construction of sterically congested all-carbon quaternary centers. Computational and experimental mechanistic studies provided insights into the reaction mechanism and observed regioselectivity/diastereoselectivity.
Asunto(s)
Azepinas/síntesis química , Iminas/química , Quinolinas/química , Azepinas/química , Catálisis , Ciclización , Estructura Molecular , Oxidación-Reducción , Procesos Fotoquímicos , EstereoisomerismoRESUMEN
The search for selective C-H functionalisation has enabled some of the most elegant techniques in modern catalysis. Herein, we review the rapidly expanding field of ruthenium catalysed σ-activation as a tool in the selective meta-C-H functionalisation of arenes.
RESUMEN
The para-selective C-H alkylation of aniline derivatives furnished with a pyrimidine auxiliary is herein reported. This reaction is proposed to take place via an N-H-activated cyclometalate formed in situ. Experimental and DFT mechanistic studies elucidate a dual role of the ruthenium catalyst. Here the ruthenium catalyst can undergo cyclometalation by N-H metalation (as opposed to C-H metalation in meta-selective processes) and form a redox active ruthenium species, to enable site-selective radical addition at the para position.
RESUMEN
Ruthenium(II)-catalyzed C-H functionalization of N-arylhydantoins is herein described. The biologically relevant hydantoin (imidazolidinedione) heterocycle functions as a weakly coordinating directing group in a C-H alkenylation reaction. The reaction gave a wide scope of 23 examples with yields up to 94% in the green solvent 2-MeTHF. Functionalization of API nilutamide (antiandrogen) is also reported. The use of the succinimide heterocycle as a directing group is also demonstrated in modest yields.
RESUMEN
[This corrects the article DOI: 10.1021/acs.oprd.2c00226.].
RESUMEN
All fluorochemicals-including elemental fluorine and nucleophilic, electrophilic, and radical fluorinating reagents-are prepared from hydrogen fluoride (HF). This highly toxic and corrosive gas is produced by the reaction of acid-grade fluorspar (>97% CaF2) with sulfuric acid under harsh conditions. The use of fluorspar to produce fluorochemicals via a process that bypasses HF is highly desirable but remains an unsolved problem because of the prohibitive insolubility of CaF2. Inspired by calcium phosphate biomineralization, we herein disclose a protocol of treating acid-grade fluorspar with dipotassium hydrogen phosphate (K2HPO4) under mechanochemical conditions. The process affords a solid composed of crystalline K3(HPO4)F and K2-xCay(PO3F)a(PO4)b, which is found suitable for forging sulfur-fluorine and carbon-fluorine bonds.
RESUMEN
The nickel-catalyzed cross-electrophile coupling of aryl halides and alkyl halides enabled by ball-milling is herein described. Under a mechanochemical manifold, the reductive C-C bond formation was achieved in the absence of bulk solvent and air/moisture sensitive setups, in reaction times of 2 h. The mechanical action provided by ball milling permits the use of a range of zinc sources to turnover the nickel catalytic cycle, enabling the synthesis of 28 cross-electrophile coupled products.
RESUMEN
The construction of enantioenriched azabicyclo[3.3.1]nonan-6-one heterocycles via an enantioselective desymmetrization of allene-linked cyclohexanones, enabled through a dual catalytic system, that provides synchronous activation of the cyclohexanone with a chiral prolinamide and the allene with a copper(i) co-catalyst to deliver the stereodefined bicyclic core, is described. Successful application to oxygen analogues was also achieved, thereby providing a new enantioselective synthetic entry to architecturally complex bicyclic ethereal frameworks. The mechanistic pathway and the origin of enantio- and diastereoselectivities has been uncovered using density functional theory (DFT) calculations.
RESUMEN
The catalytic reductive transformation of carboxylic esters into α-branched ethers is described. The procedure pivots on the chemoselective iridium-catalyzed hydrosilylation of ester and lactone functionality to afford a silyl acetal intermediate. Upon treatment with a Lewis acid, these hemilabile intermediates dissociate to form reactive oxocarbenium ions, which can be intercepted by allyltributyltin nucleophiles, resulting in the formation of valuable α-branched alkyl-alkyl ether derivatives. This reductive allylation procedure was found to be amenable to a range of carboxylic ester starting materials, and good chemoselectivity for ethyl over tert-butyl esters was demonstrated. Furthermore, downstream synthetic manipulation of α-amino acid-derived products led to the efficient formation of pyrrolidine, piperidine, and azepane frameworks.
RESUMEN
A quinone-mediated general synthetic platform for the construction of primary α-tertiary amines from abundant primary α-branched amine starting materials is described. This procedure pivots on the efficient in situ generation of reactive ketimine intermediates and subsequent reaction with carbon-centered nucleophiles such as organomagnesium and organolithium reagents, and TMSCN, creating quaternary centers. Furthermore, extension to reverse polarity photoredox catalysis enables reactivity with electrophiles, via a nucleophilic α-amino radical intermediate. This efficient, broadly applicable and scalable amine-to-amine synthetic platform was successfully applied to library and API synthesis and in the functionalization of drug molecules.