FasL is a catabolic factor in alveolar bone homeostasis.

AIM: Fas ligand (FasL) belongs to the tumour necrosis factor superfamily regulating bone turnover, inflammation, and apoptosis. The appendicular and axial skeleton phenotype of mature Faslgld mice has been reported. The impact of FasL on the alveolar bone providing support for the teeth at mature stages under healthy and induced inflammatory conditions remains unknown. MATERIALS AND METHODS: We performed a phenotypical analysis of mice carrying the homozygous Faslgld mutation and wild-type (WT) mice (C57BL/6) under healthy conditions and upon ligature-induced periodontitis. After 12 days, micro-computed tomography analysis revealed the distance between the cement enamel junction and the alveolar bone crest. Additional structural parameters, such as the bone volume fraction (BV/TV) and the periodontal ligament space volume, were measured. Histological analyses were performed to visualize the catabolic changes at the defect site. RESULTS: Healthy Faslgld mice were found to have more periodontal bone than their WT littermates. Faslgld had no significant effect on inflammatory osteolysis compared to WT controls with ligatures. Histology revealed eroded surfaces at the root and in the inter-proximal bone in both strains. CONCLUSIONS: Our findings suggest that FasL is a catabolic factor in alveolar bone homeostasis but it does not affect the inflammatory osteolysis.

A volumetric prediction model for postoperative cyst shrinkage.

OBJECTIVES: With only limited information available on dimensional changes after jaw cyst surgery, postoperative cyst shrinkage remains largely unpredictable. We aimed to propose a model for volumetric shrinkage based on time elapsed since cyst surgery. MATERIAL AND METHODS: We used data from patients that underwent cyst enucleation or decompression between 2007 and 2017 and had at least three computed tomography (CT) scans per patient. We fitted one simple exponential decay model [V(t) = V0 · e-ɑt] and one model with a patient-specific decay rate [Vk(t) = V0 · e-ßt + γkt]. RESULTS: Based on 108 CT scans from 36 patients (median age at surgery: 45.5 years, IQR: 32.3-55.3, 44% female), our simple exponential decay model is V(t) = V0 · e-0.0035t where V(t) is the residual cyst volume after time t elapsed since surgery, V0 is the initial cyst volume, and e is the base of the natural logarithm. Considering a patient-specific decay rate, the model is Vk(t) = V0 · e-0.0049t + γkt where γk is normally distributed, with expectation 0 and standard deviation 0.0041. CONCLUSIONS: Using an exponential regression model, we were able to reliably estimate volumetric shrinkage after jaw cyst surgery. The patient-specific decay rate substantially improved the fit of the model, whereas adding specific covariates as interaction effects to model the decay rate did not provide any significant improvement. CLINICAL RELEVANCE: Estimating postoperative cyst shrinkage is relevant for both treatment planning of jaw cyst surgery as well as evaluating the clinical success of the surgical approach.

Is MRI a viable alternative to CT/CBCT to identify the course of the inferior alveolar nerve in relation to the roots of the third molars?

OBJECTIVES: To assess the reliability of judging the spatial relation between the inferior alveolar nerve (IAN) and mandibular third molar (MTM) based on MRI or CT/CBCT images. METHODS: Altogether, CT/CBCT and MRI images of 87 MTMs were examined twice by 3 examiners with different degrees of experience. The course of the IAN in relation to the MTM, the presence/absence of a direct contact between IAN and MTM, and the presence of accessory IAN were determined. RESULTS: The IAN was in > 40% of the cases judged as inferior, while an interradicular position was diagnosed in < 5% of the cases. The overall agreement was good (κ = 0.72) and any disagreement between the imaging modalities was primarily among the adjacent regions, i.e., buccal/lingual/interradicular vs. inferior. CT/CBCT judgements presented a very good agreement for the inter- and intrarater comparison (κ > 0.80), while MRI judgements showed a slightly lower, but good agreement (κ = 0.74). A direct contact between IAN and MTM was diagnosed in about 65%, but in almost 20% a disagreement between the judgements based on MRI and CT/CBCT was present resulting in a moderate overall agreement (κ = 0.60). The agreement between the judgements based on MRI and CT/CBCT appeared independent of the examiner's experience and accessory IAN were described in 10 cases in MRI compared to 3 cases in CT/CBCT images. CONCLUSIONS: A good inter- and intrarater agreement has been observed for the assessment of the spatial relation between the IAN and MTM based on MRI images. Further, MRI images might provide advantages in the detection of accessory IAN compared to CT/CBCT. CLINICAL RELEVANCE: MRI appears as viable alternative to CT/CBCT for preoperative assessment of the IAN in relation to the MTM.

Short-term results of the combined application of neodymium-doped yttrium aluminum garnet (Nd:YAG) laser and erbium-doped yttrium aluminum garnet (Er:YAG) laser in the treatment of periodontal disease: a randomized controlled trial.

OBJECTIVES: Nd:YAG and Er:YAG lasers have been previously used as an adjunct in periodontal therapy. The aim of this single-blinded randomized controlled clinical trial was to evaluate the efficacy of a combined application of Nd:YAG and Er:YAG laser irradiation in periodontal treatment. MATERIALS AND METHODS: Twenty-two patients with at least one site of ≥ 6 mm periodontal probing depth (PPD) after mechanical debridement with curettes and sonic instruments at periodontal reevaluation were included in the study. Patients were randomly allocated at a 1:1 ratio to either a combined Nd:YAG/Er:YAG laser therapy (test group) or a "turned off" laser therapy (control group). The Nd:YAG laser was used for periodontal pocket deepithelialization and to stabilize the resulting blood clot. The Er:YAG laser was primarily used for root surface modification. PPD (mm), clinical attachment level (CAL, mm), and bleeding on probing (BOP, +/-) at the site of laser treatment were evaluated at baseline and 2 months after treatment. RESULTS: The mean improvements from baseline to 2-month follow-up for PPD were significantly better in the laser group (2.05 ± 0.82 mm) compared to the control group (0.64 ± 0.90 mm; p = 0.001). Likewise, the gain in CAL was significantly better in the laser group (1.50 ± 1.10 mm) than in the control group (0.55 ± 1.01mm; p = 0.046). CONCLUSIONS: The combined application of Nd:YAG and Er:YAG laser irradiation as an adjunct to conventional non-surgical therapy showed a significant beneficial effect on periodontal treatment results. CLINICAL RELEVANCE: Combined Nd:YAG and Er:YAG laser irradiation could be a useful procedure additionally to conventional non-surgical periodontal therapy to improve periodontal treatment results. CLINICAL TRIAL REGISTRATION: ISRCTN registry #ISRCTN32132076.

An advanced prediction model for postoperative complications and early implant failure.

OBJECTIVES: Risk prediction in implant dentistry presents specific challenges including the dependence of observations from patients with multiple implants and rare outcome events. The aim of this study was to use advanced statistical methods based on penalized regression to assess risk factors in implant dentistry. MATERIAL AND METHODS: We conducted a retrospective study from January 2016 to November 2018 recording postoperative complications including bleeding, hematoma, local infection, and nerve damage, as well as early implant failure. We further assessed patient- and implant-related risk factors including smoking and diabetes, as well as treatment parameters including types of gaps and surgical procedures. Univariable and multivariable generalized estimating equation (GEE) models were estimated to assess predictor effects, and a prediction model was fitted using L1 penalized estimation (lasso). RESULTS: In a total of 1,132 patients (mean age: 50.6 ± 16.5 years, 55.4% female) and 2,413 implants, postoperative complications occurred in 71 patients. Sixteen implants were lost prior to loading. Multivariable GEE models showed a higher risk of any complication for diabetes mellitus (p = .006) and bone augmentation (p = .039). The models further revealed a higher risk of local infection for bone augmentation (p = .003), and a higher risk of hematoma formation for diabetes mellitus (p = .007) and edentulous jaws (p = .024). The lasso model did not select any risk factors into the prediction model. CONCLUSIONS: Using novel methodology well-suited to tackle the specific challenges of risk prediction in implant dentistry, we were able to reliably estimate associations of risk factors with outcomes.

The efficacy of ultrasonic and PIPS (photon-induced acoustic streaming) irrigation to remove artificially placed dentine debris plugs out of an artificial and natural root model.

The aim was to validate an artificial resin 'root canal wall groove model' (RCWGM) mimicking the situation of natural roots with a groove of identical dimensions on debris removal out of these grooves, and to evaluate Erbium 'laser-activated irrigation' (LAI) with two conical tips at PIPS (photon-induced photoacoustic streaming) settings, with different activation times and different root canal positions on debris removal out of the grooves. A split RCWGM was used (resin blocks and roots of maxillary canines) with a canal size 40/0.06. The grooves in the apical third were filled with stained dentinal debris. Seventeen irrigation protocols (n = 20) were used: syringe-needle irrigation (3× 20 s), manual dynamic activation (1× 60 s), ultrasonically activated irrigation (UAI) with 25/25 Irrisafe (3× 20 s) and LAI (2940 nm Er:YAG) with X-Pulse or PIPS tips at PIPS settings (20 mJ, 50 µs, 20 Hz) and with the fibre (IN) or (OUT) the canal: IN during 1× 20 s, and OUT during 1× 20 s, 2× 20 s, 3× 20 s, 30 s, 2× 30 s and 1× 60 s. The quantity of remaining dentine debris in the groove was evaluated on a numerical scale. Statistical analysis was performed by means of proportional odds logistic regression, equivalence testing and Wald tests. The level of significance was set at 0.05. Resin models and the RCWGM with natural teeth can be called equivalent (log odds ratio 0.185). There were mostly no statistically significant differences for debris removal between UAI and LAI (p > 0.05) and between LAI with PIPS and X-Pulse (p > 0.05). Although not statistically different, the numbers of completely cleaned grooves were higher with LAI than with UAI for a 1-min activation, confirming findings from other studies. There is no difference in cleaning efficacy between X-Pulse and PIPS tips at PIPS settings.

How to assess? Perceptions and preferences of undergraduate medical students concerning traditional assessment methods.

BACKGROUND: Medical students' perception of traditional assessments have an important impact on their approaches to learning. Even though these assessment formats such as Multiple-Choice Question (MCQ), Short Answer Question (SAQ) or oral examinations, are frequently used in medical curricula, only little is known about student's perceptions of these assessments. The objective of this study was to assess perceptions and preferences of undergraduate medical students concerning traditional assessment formats. METHODS: The study was conducted at the Medical University of Vienna. Attitudes of 2nd year undergraduate medical students towards traditional assessment formats, and their relation to students' learning, and students' attitude towards objectivity, was inquired using a self-developed questionnaire. RESULTS: 459 students participated in this study. MCQs examinations were the most preferred assessment format and were chosen as the most objective format. Most students agreed that oral examinations are more appropriate for achieving long-term knowledge. Female students showed higher preference for oral examinations than male students. Students would prefer an assessment mix of 41.8% MCQs, 24.0% oral examinations, and 9.5% SAQs, if they were free to choose the assessment tools. CONCLUSION: Students prefer MCQ format over SAQs/oral examinations. Students' subjective perception of the importance of gaining long-term knowledge through an assessment has no influence on their assessment preference.

Pursue today and assess tomorrow - how students' subjective perceptions influence their preference for self- and peer assessments.

BACKGROUND: Alternative assessments engage students in the assessment process to improve both short- and long-term outcomes by developing their judgments and responsibility about their own learning, and that of their peers. In this study, we investigated students' perception towards self- and peer-assessment, their objectivity and impact on students' learning. METHODS: The study was conducted at the Medical University of Vienna. Attitudes of second year undergraduate medical students towards self- and peer-assessment, and their objectivity, appropriateness, and the impact of these assessments on students' learning activities, was inquired using a self-developed questionnaire. RESULTS: Four hundred twenty-three students participated in this study. Self-assessment was found more appropriate method to assess students' knowledge. Most of students agreed that peer-assessment is not objective (M = - 0.07). Majority of students evaluated that peer assessment has no or little impact on their active and passive learning (M = - 0.23, - 0.35), on the other hand self-assessment was reported as a helpful tool for gaining long-term knowledge (M = 0.13) and following the content of courses (M = 0.16). CONCLUSION: Based on our results, students' perspective on peer assessment were negative, on the whole, students had positive attitudes towards self-assessment and negative attitudes towards peer-assessment. This study also determined that self-assessment leads to the promotion of students' learning.

Effect of bisphosphonate treatment of titanium surfaces on alkaline phosphatase activity in osteoblasts: a systematic review and meta-analysis.

BACKGROUND: Bisphosphonate coating of dental implants is a promising tool for surface modification aiming to improve the osseointegration process and clinical outcome. The biological effects of bisphosphonates are thought to be mainly associated with osteoclasts inhibition, whereas their effects on osteoblast function are unclear. A potential of bisphosphonate coated surfaces to stimulate osteoblast differentiation was investigated by several in vitro studies with contradictory results. The purpose of this systematic review and meta-analysis was to evaluate the effect of bisphosphonate coated implant surfaces on alkaline phosphatase activity in osteoblasts. METHODS: In vitro studies that assessed alkaline phosphatase activity in osteoblasts following cell culture on bisphosphonate coated titanium surfaces were searched in electronic databases PubMed/MEDLINE, Scopus and ISI Web of Science. Animal studies and clinical trials were excluded. The literature search was restricted to articles written in English and published up to August 2019. Publication bias was assessed by the construction of funnel plots. RESULTS: Eleven studies met the inclusion criteria. Meta-analysis showed that coating of titanium surfaces with bisphosphonates increases alkaline phosphatase activity in osteoblasts after 3 days (n = 1), 7 (n = 7), 14 (n = 6) and 21 (n = 3) days. (7 days beta coefficient = 1.363, p-value = 0.001; 14 days beta coefficient = 1.325, p-value < 0.001; 21 days beta coefficient = 1.152, p-value = 0.159). CONCLUSIONS: The meta-analysis suggests that bisphosphonate coatings of titanium implant surfaces may have beneficial effects on osteogenic behaviour of osteoblasts grown on titanium surfaces in vitro. Further studies are required to assess to which extent bisphosphonates coating might improve osseointegration in clinical situations.

Attitudes of dental students towards patients with special healthcare needs: Can they be improved?

INTRODUCTION: Lack of knowledge and skills as well as negative attitudes towards patients with special healthcare needs may adversely affect the services available to this group. In 2010, a line on the treatment of patients with special healthcare needs has been implemented in the dental curriculum at the Medical University of Vienna, including five seminars and a practical course. In this study, we examine to what extent the programme helps improve attitudes towards persons with special healthcare needs and positively impacts the readiness to engage in treating this clientele. MATERIALS AND METHODS: In 2017 and 2018, all students who were in their fourth study year participated in the study. Students' attitudes were assessed before the first seminar, after the last seminar and after the practical course. At all three time points, the same fully structured questionnaire was used, including established instruments for the assessment of emotional reactions and the desire for social distance plus ad hoc questions for assessing students' future intention to treat patients with special healthcare needs. The data were analysed by means of linear fixed models. RESULTS: At the end of the line devoted to patients with special healthcare needs, students tended less to express negative emotions and showed more positive emotional reactions than before the start of the programme. However, students' social acceptance of such patients and their readiness to engage in treating them did not change significantly. DISCUSSION: While our programme was able to improve students' emotional reactions to people with special healthcare needs, it proved unable to reduce the desire for social distance and to lower the barrier when it comes to treatment. It is planned to further develop our programme which, hopefully, will then succeed in increasing students' readiness to treat this clientele. CONCLUSION: Improving dental students' emotional reactions to patients with special healthcare needs does not necessarily translate into greater readiness to treat this clientele.

Efficacy of desensitizing products containing 8% arginine and calcium carbonate for hypersensitivity relief in MIH-affected molars: an 8-week clinical study.

OBJECTIVES: The objective of this study was to compare the efficacy in reducing hypersensitivity in molar incisor hypomineralization (MIH)-affected molars immediately and over 8 weeks combining a single in-office application and a homed-based program with desensitizing products containing 8% arginine and calcium carbonate. MATERIALS AND METHODS: Nineteen children with at least one MIH-affected molar with hypersensitivity were included. Hypersensitivity was assessed with an evaporative (air) stimulus and a tactile stimulus. Each child received a single in-office treatment with a desensitizing paste containing 8% arginine and calcium carbonate (elmex Sensitive Professional desensitizing paste), followed by 8 weeks of brushing twice daily with a desensitizing toothpaste containing 8% arginine, calcium carbonate with 1450 ppm fluoride (elmex Sensitive Professional toothpaste), using the elmex Sensitive Professional toothbrush. Additionally, the corresponding mouthwash (elmex Sensitive Professional mouthwash) was used. Clinical assessments were made at baseline, immediately after the in-office treatment and after 1, 2, 4 and 8 weeks of brushing twice daily. RESULTS: Fifty-six molars with an air blast hypersensitivity score of 2 or 3 (Schiff Cold Air Sensitivity Scale) were included. Application of the desensitizing paste decreased hypersensitivity significantly immediately and throughout the 8 weeks recalls (p < 0.001). CONCLUSIONS: In conclusion, 8% arginine and calcium carbonate were able to reduce hypersensitivity successfully during this 8-week trial. CLINICAL RELEVANCE: Hypersensitivity is a major complaint in patients with MIH. This is the first study evaluating the desensitizing effect of a desensitizing paste containing 8% arginine and calcium carbonate in patients with MIH.

A root canal filling per se does not have a significant negative effect on the marginal periodontium.

AIM: To evaluate the periodontal status of single-rooted endodontically treated teeth (ET), correcting for patient- and tooth-related factors. METHODS: Clinical parameters (BoP,PD,CAL) of 240 ET and 240 contralateral vital teeth (VT), before and after non-surgical periodontal treatment, were extracted retrospectively from the journals of 175 patients. Possible patient-related (age, gender, smoking status) and tooth-related (interproximal restoration, root canal filling's extent, post, tooth type) confounders were tested. RESULTS: At baseline, frequency of BoP at an interproximal site at ET versus VT was 70.4% versus 65.0%, respectively. The frequency of teeth with interproximal PD ≥ 5 mm and CAL ≥ 5 mm was 47.9% versus 42.9% and 54.6% versus 49.6% at ET and VT, respectively. Interproximal PD and CAL at ET versus VT were 3.86 versus 3.61 mm and 4.11 versus 3.95 mm. After correcting for tooth-related factors, no significant differences were observed between ET and VT. An improper restoration had a significant (p < 0.001) negative effect on BoP [OR 3.49 (95%CI: 1.95-6.27)], PD [36.81% (95%CI: 18.52-57.92)] and CAL [27.01% (95%CI: 12.67-43.18)]. No significant differences between ET and VT were observed regarding clinical outcome of non-surgical periodontal therapy. CONCLUSIONS: Presence of a root canal filling per se does not have a significant negative influence on the marginal periodontium, when correcting for the quality of the interproximal restoration.

Inter- and intra-observer agreement on Miller's classification of gingival tissue recessions.

Miller's is the most commonly used classification of gingival tissue recessions, defined as the displacement of the soft tissue margin apical to the cemento-enamel junction. However, data on the reliability of this classification are missing so far, although reliability, which reflects the consistency of repeated measurements, is regarded as a prerequisite for judging the utility of a classification. The aim of the present study was to evaluate inter- and intra-observer agreement on Miller's classification of gingival tissue recessions. Two hundred photographs (50 of each region: maxillary/mandibular anterior/posterior teeth) of gingival tissue recessions were evaluated twice by four observers with different degrees of experience in Miller's classification, gingival phenotype, tooth shape, and identifiability of the cemento-enamel junction. The following inter- and intra-observer agreements were found: Miller's classification, 0.72 and 0.73-0.95; gingival phenotype, 0.29 and 0.45-0.58; tooth shape, 0.39 and 0.44-0.59; and identifiability of the cemento-enamel junction, 0.21 and 0.30-0.59. A higher agreement was detected for anterior teeth. Further, gingival phenotype (thin-high scalloping) significantly correlated with tooth shape (long-narrow) (ρ = 0.662, p < 0.001). Miller's classification of gingival tissue recessions was evaluated by four examiners using 200 clinical photographs and yielded substantial to almost perfect agreement, with higher agreement for anterior teeth. Although limited to photographic assessment, the present study offers the so far missing proof on the sufficient inter- and intra-observer agreement of this classification.

Clinical and radiological evaluation of a template-guided (NobelGuide™) treatment concept.

OBJECTIVES: The study was designed to evaluate the clinical use of the NobelGuide(™) concept over a follow-up period of 12 months with respect to implant success and survival rates, development of soft tissue condition and recording of potential surgical and prosthetic complications. In addition, radiological assessment of peri-implant bone levels was performed at the 1-year follow-up post-implant placement. MATERIAL AND METHODS: Thirty patients (male/female = 15/15) with partially dentate and edentulous mandibles and maxillae were included. All patients were planned and operated on using the computer-aided, template-guided treatment concept NobelGuide(™). Overall, 163 implants (NobelReplace(®) Tapered Groovy) were placed (mandible/maxilla = 107/56 implants). Recall appointments were performed after 1-2 weeks, 1, 3, 6 and 12 months after implant placement. Clinical parameters of the soft tissue conditions [e.g. bleeding on probing (BoP), pocket probing depth ≥3 mm (PPD), marginal plaque index (mPI)] and the dentist's esthetic and functional evaluation using a visual analogue scale (VAS) were documented. Marginal bone level was evaluated on radiographs made at implant insertion and at the 1-year follow-up. RESULTS: All 30 patients with 161 implants completed the 1-year follow-up resulting in a cumulative survival rate of 98.8% (two implant losses). Clinical parameters improved in a majority of the implants. The mean marginal bone level at implant insertion and at 1-year follow-up was reported with 0.17 mm (SD 1.24; n = 125) and -1.39 mm (SD 1.27; n = 110), respectively. The mean change in bone level from implant insertion to 1 year was -1.44 mm (SD 1.35; n = 98). CONCLUSIONS: The 1-year follow-up showed a cumulative survival rate and success rate of 98.8% and 96.3%, respectively. Immediate or delayed loading of implants using a flapless, guided surgery approach (NobelGuide(™)) appears to be a viable concept demonstrating good clinical and radiographic outcomes at the 1-year time point.

Transfer accuracy of 3D printed versus CAD/CAM milled surgical guides for temporary orthodontic implants: A preclinical micro CT study.

OBJECTIVES: Temporary anchorage devices (TADs) have become an integral part of comprehensive orthodontic treatments. This study evaluated the transfer accuracy of three-dimensional (3D) printed and computer-aided design/computer-aided manufacturing (CAD/CAM) milled surgical guides for orthodontic TADs using micro-computed tomography (CT) imaging in a preclinical trial. METHODS: Overall, 30 surgical guides were used to place TADs into typodonts; 3D printing and CAD/CAM milling were used to produce the guides. The virtual target positions of the TADs were compared to the real positions in terms of spatial and angular deviations using digital superimposition. Micro-CT imaging was used to detect the positions. To evaluate reliability, two investigators collected the measurements twice. Intra-rater and inter-rater correlations were tested. RESULTS: In total, 60 palatal TADs were evaluated. The mean coronal deviations in the print group ranged from 0.15 ± 0.20 mm to 0.71 ± 0.22 mm, whereas in the mill group, they ranged from 0.09 ± 0.15 mm to 0.83 ± 0.23 mm. At the apical tip, the overall deviations in the print group ranged from 0.14 ± 0.56 mm to 1.27 ± 0.66 mm, whereas in the mill group, they ranged from 0.15 ± 0.57 mm to 1.09 ± 0.44 mm. The mean intra-class and inter-class correlation coefficients ranged from 0.904 to 0.987. No statistically significant differences were found between the groups. CONCLUSIONS: CAD/CAM milled guides yielded spatial and angular accuracies comparable to those of 3D printed guides with notable deviations in the vertical positioning of TADs. CLINICAL SIGNIFICANCE: Digital planning of orthodontic temporary implants combines clinical predictability and the safety of surrounding tissue. Therefore, the transfer accuracy of the guides is crucial. This preclinical study was the first to evaluate CAD/CAM milling for orthodontic guides and found its accuracy comparable to that of the current "gold standard".

Do strength of zirconia-abutment-interfaces depend on cement, zirconia type and titanium abutment dimensions?

OBJECTIVES: Part 1 of this study investigates the influence of zirconia types, chimney heights, and gingival heights on the strength of the zirconia-abutment-interface. Part 2 extends the analysis to include adhesive brands and macro-retentions. METHODS: In Part 1, the study utilized three zirconia types (700 MPa, 1000 MPa, 1200 MPa) to fabricate 234 screw-retained zirconia crowns with varying chimney heights (3.5 mm, 4.1 mm, 5 mm) and gingival heights (0.65 mm, 1.2 mm, 3 mm) of the titanium abutments. All adherend surfaces underwent sandblasting with aluminum oxide before cementation with a specific resin cement. In Part 2, the investigation of 240 screw-retained zirconia crowns focused on a single zirconia type (1000 MPa) with chimney heights of 3.5 mm and 5 mm and a gingival height of 0.65 mm of the titanium abutments, cemented with three different resin cements. All adherent surfaces underwent sandblasting with aluminum oxide before cementation, whereas 120 out of 240 abutments received additional macro retentions. Storage in water at 37 °C for 24 h preceded the tensile test. RESULTS: The study revealed a substantial impact of chimney height and zirconia type on the bond strength of the zirconia-abutment-interface. Neither adhesive brands nor macro retentions significantly impacted the bond strength. Fracture incidence was significantly influenced by gingival height and zirconia type in part 1, whereas in part 2 smaller chimney heights correlated with a higher fracture incidence. SIGNIFICANCE: This study contributes insights into the complex interplay of factors influencing the zirconia-abutment-interface. The results provide a foundation for refining clinical approaches, emphasizing the importance of chimney height and zirconia type in achieving successful anterior gap implant restorations.

Clinical and Radiographic Outcomes of Single Implant-Supported Zirconia Crowns Following a Digital and Conventional Workflow: Four-Year Follow-Up of a Randomized Controlled Clinical Trial.

PURPOSE: This study aimed to compare the clinical and radiographic outcomes of single posterior screw-retained monolithic implant crowns following a digital and conventional workflow and to report on the survival/complication rate after a mean 4-year follow-up. MATERIALS AND METHODS: Thirty patients with a single posterior tooth missing were rehabilitated with a bone-level implant. After a healing period of ≥3 months, they were subjected to both a digital and conventional workflow to fabricate two screw-retained monolithic implant crowns. The quantitative clinical adjustments to both crowns (intrasubject comparison) and a questionnaire were recorded at try-in. Thereafter, a crown of the digital and conventional workflows was randomly inserted. At the last follow-up, the marginal bone level (MBL), peri-implant health-related parameters (bleeding on probing (BoP), plaque, pocket probing depth (PPD)), and functional implant prosthodontic score (FIPS) were assessed. Furthermore, the implant survival and success rates and technical complications were evaluated. RESULTS: A total of 27 patients were followed for a mean period of 4.23 ± 1.10 years. There was no significant difference between the digital and conventional workflows regarding clinical adjustments and questionnaire outcomes. More than twice as many participants recommended digital (n = 16) compared to conventional impressions (n = 7) to friends. The implant survival and success rate were 100% and 96.3%, respectively. Furthermore, two de-cementations and one fracture of the ti-base abutment occurred. There were no significant differences in BoP, plaque, and PPD metrics between the two groups. The changes in the MBL between implant crown insertion (baseline) and the last follow-up were 0.07 ± 0.19 mm and 0.34 ± 0.62 mm in the digital and conventional groups, respectively (p = 0.195). The mean overall FIPS score was 8.11 ± 1.37 (range: 5-10). CONCLUSIONS: The clinical and radiographic outcomes of single screw-retained monolithic implant crowns were similar between both workflows after a mean of 4 years of service. The patients did not clearly prefer an impression technique for their restoration, although they would recommend the digital impression more often to friends. Thus, decision regarding clinical workflows may be based on the patient's and/or clinician's preference.

Active and Passive Mineralization of Bio-Gide® Membranes in Rat Calvaria Defects.

Bio-Gide® is a collagen membrane routinely used in guided bone regeneration. Recent studies have shown that this collagen membrane has osteoconductive properties, meaning that it can support the growth of new bone. However, it has also been observed that the collagen membrane has areas of mineralized fibers which can occur spontaneously and independently of osteoblasts. To better understand how this works, we established a model using minced collagen membranes to reduce the active mineralization of intact collagen membranes in favor of passive mineralization. We thus compared the original intact membrane with a minced collagen membrane in a 5 mm calvarial defect model in Sprague Dawley rats. After three weeks of healing, histology and microcomputed tomography (µCT) were performed. Histological analysis confirmed the osteoconductive properties, with new bone growing inside the intact collagen membrane. However, in minced collagen membranes, the osteoconductive properties were restricted to the defect margins. Interestingly, histology revealed large mineralized areas indicating passive mineralization with no signs of bone formation. In the µCT analysis, the intact collagen membranes caused a higher median mineralized volume (1.5 mm3) compared with the minced group (0.4 mm3), but this lacked significance (p = 0.09). The µCT analysis needs to be interpreted carefully, particularly in defects filled with minced membranes, considering that the mineralized tissue may not necessarily be bone but also the result of passive mineralization. Taken together, the findings suggest that Bio-Gide® collagen membranes support bone formation while also exhibiting potential for passive mineralization.

Human versus Rat PRF on Collagen Membranes: A Pilot Study of Mineralization in Rat Calvaria Defect Model.

Platelet-rich fibrin, the coagulated plasma fraction of blood, is commonly used to support natural healing in clinical applications. The rat calvaria defect is a standardized model to study bone regeneration. It remains, however, unclear if the rat calvaria defect is appropriate to investigate the impact of human PRF (Platelet-Rich Fibrin) on bone regeneration. To this end, we soaked Bio-Gide® collagen membranes in human or rat liquid concentrated PRF before placing them onto 5 mm calvarial defects in Sprague Dawley rats. Three weeks later, histology and micro-computed tomography (µCT) were performed. We observed that the collagen membranes soaked with rat PRF show the characteristic features of new bone and areas of mineralized collagen matrix, indicated by a median mineralized volume of 1.5 mm3 (range: 0.9; 5.3 mm3). Histology revealed new bone growing underneath the membrane and hybrid bone where collagen fibers are embedded in the new bone. Moreover, areas of passive mineralization were observed. The collagen membranes soaked with human PRF, however, were devoid of histological features of new bone formation in the center of the defect; only occasionally, new bone formed at the defect margins. Human PRF (h-PRF) caused a median bone volume of 0.9 mm3 (range: 0.3-3.3 mm3), which was significantly lower than what was observed with rat PRF (r-PRF), with a BV median of 1.2 mm3 (range: 0.3-5.9 mm3). Our findings indicate that the rat calvaria defect model is suitable for assessing the effects of rat PRF on bone formation, but caution is warranted when extrapolating conclusions regarding the efficacy of human PRF.

Comparison of Virtual Intersection and Occlusal Contacts between Intraoral and Laboratory Scans: An In-Vivo Study.

BACKGROUND: The inaccurate maxillomandibular relationship of virtual casts following alignment by the vestibular scan may result in intersection (intermesh penetration) between opposing dental arch surfaces. Intersection occurs at short interocclusal distances in the occlusal contact area (OCA) and may result in infra-occluded definitive restorations. The purpose of this clinical study was to compare initial (by the proprietary scanner software) and new alignments (by a standalone 3D software) of virtual casts regarding OCA and intersection failure. New alignments aimed to rectify intersections by refinement of occlusal contacts. MATERIAL AND METHODS: The virtual casts of 30 patients following digital and conventional impression-taking were analyzed, which were acquired for single implant restoration in the posterior site. Digital impressions were performed by both IOS 1 (3M True Definition) and IOS 2 (TRIOS 3), either as complete- or partial-arch scans, respectively. Mounted gypsum casts were digitized as complete-arch by a laboratory scanner (LS) in enabled and disabled mode to avoid intersection [LS (+)/LS (-)]. All virtual casts were newly aligned by a 3D software. The difference of the OCA and the area of intersection were calculated for initial and new alignments, using interocclusal distance ranges of 0-100 µm, 0-10 µm or <0 µm (=intersection). The difference of the OCA was compared using a linear mixed model. The distribution of occlusal contact points per modality and alignment was assessed independently by three observers and estimated by inter- and intraclass correlation (ICC) coefficients. RESULTS: Virtual casts following initial alignment demonstrated intersections irrespective of the modality. The mean area of the intersection was most for IOS 2 (79.23 mm2), followed by IOS 1 (48.28 mm2), LS (-) (2.77 mm2), and LS (+) (2.01 mm2) in partial-arch scans. Complete-arch scans demonstrated an area of intersection of 70.63 mm2 for IOS 1 followed by 65.52 mm2 (IOS 2), 6.13 mm2 [LS (-)] and 2.76 mm2 [LS (+)]. Newly aligned scans showed no intersections. The overall distribution of occlusal contact points demonstrated moderate reliability (ICC 0.63). Good reliability could be observed (ICC 0.9) for LS (-) scans. CONCLUSIONS: Intersections in the area of occlusal contact points are a phenomenon restricted to virtual casts, which should be considered in CAD/CAM. Initial alignments of LS are less affected by this virtual phenomenon, and contact points may be more distinct according to their anatomic region compared to IOS. Furthermore, intersections can be rectified in a 3D software by adjustment of the maxillomandibular relationship.