A "Zn2+ in Salt" Interphase Enabling High-Performance Zn Metal Anodes.

Zinc metal is a promising anode candidate for aqueous zinc ion batteries due to its high theoretical capacity, low cost, and high safety. However, its application is currently restricted by hydrogen evolution reactions (HER), by-product formation, and Zn dendrite growth. Herein, a "Zn2+ in salt" (ZIS) interphase is in situ constructed on the surface of the anode (ZIS@Zn). Unlike the conventional "Zn2+ in water" working environment of Zn anodes, the intrinsic hydrophobicity of the ZIS interphase isolates the anode from direct contact with the aqueous electrolyte, thereby protecting it from HER, and the accompanying side reactions. More importantly, it works as an ordered water-free ion-conducting medium, which guides uniform Zn deposition and facilitates rapid Zn2+ migration at the interface. As a result, the symmetric cells assembled with ZIS@Zn exhibit dendrite-free plating/striping at 4500 h and a high critical current of 14 mA cm-2. When matched with a vanadium-based (NVO) cathode, the full battery exhibits excellent long-term cycling stability, with 88% capacity retention after 1600 cycles. This work provides an effective strategy to promote the stability and reversibility of Zn anodes in aqueous electrolytes.

The impacts of biologic treatment on metabolic profiling in psoriasis.

Psoriasis is an immune-mediated inflammatory disease commonly accompanied by various metabolic disorders. It is widely known that biologics could affect the metabolic status and comorbidities in psoriasis patients, however, the effects of biologics on metabolism in psoriasis patients remain poorly understood. The aim of this study was to elucidate the characteristic changes of metabolic profiling in psoriasis vulgaris (PsV) patients before and after applying biologics. Plasma samples were collected from a retrospective cohort of 43 PsV patients. Non-targeted metabolomics analyses were performed using liquid chromatography-mass spectrometry (LC-MS) to compare the metabolic profiles before and after applying adalimumab (ADA) or ixekizumab (IXE) for 4 weeks. Additionally, correlation analyses were conducted to investigate the associations between metabolite expression levels and clinical characteristics. The biologics significantly affected the metabolic profiles of PsV patients especially in glycerophospholipids (GPs). First, phosphatidylcholine (PC), unsaturated lysophosphatidylcholine (LPC), unsaturated lysophosphatidic acid (LPA) and unsaturated lysophosphatidylethanolamine (LPE) were significantly up-regulated, whereas phosphatidylethanolamine (PE), saturated LPC, saturated LPA and saturated LPE were predominantly down-regulated after biologic treatment. What is more, the changes in PE and LPA were mainly observed after applying IXE instead of ADA. Second, we also found GPs including PC, unsaturated LPC, unsaturated LPA and unsaturated LPE were primarily negatively correlated with disease severity, whereas, PE, saturated LPC, saturated LPA and saturated LPE displayed inverse correlations. Biologics could affect GP metabolism and facilitate the transition of metabolic status from a pro-inflammatory to an anti-inflammatory phenotype in PsV patients.

Rehabilitation effects of game therapy in people living with dementia: A systematic review and meta-analysis: Three formats of game therapy for Alzheimer's patients.

BACKGROUND: As a devastating neurodegenerative disease, Alzheimer's disease (AD) imposes a considerable direct and indirect financial burden. However, effective drug treatment options are limited. In recent years, game therapy has become a research hotspot in this field. AIMS: The purpose of this study was to synthesize the conclusions of existing studies and integrate the data to evaluate the effects of game therapy on people living with dementia (PLWD). METHODS: We included randomized clinical trials and quasi-experimental studies which assessed the impacts of game therapy on PLWD and took cognitive function, quality of life, and depression as outcome indicators. Two trained researchers independently screened the studies, evaluated the quality, and extracted the data. Statistical analysis was performed by Review Manager (Revman) 5.3 and STATA16.0 software. RESULTS: There were 12 studies involving 877 PLWD included, total. The results of the meta-analysis demonstrated that the Mini-Mental State Examination (MMSE) scores of the test group were significantly higher than that of the control group (SMD = 2.69, 95% CI [1.88, 3.51], p < .01), and the Cornell Scale for Depression in Dementia scores of the test group were significantly lower than those of the control group (SMD = -4.28, 95% CI [-6.96, -1.60], p < .01); but in terms of quality of life (SMD = 0.17, 95% CI [-0.82, 1.16], p = .74), the difference was not statistically significant. LINKING EVIDENCE TO ACTION: Game therapy can improve cognitive function and depression in PLWD. The combination of different types of games can improve the different clinical symptoms of PLWD, and different intervention time also have different effects on the outcome, which shows that we can develop unique, systematic, safe, and scientific game intervention programs for PLWD to improve their cognitive function and depression.

A Fluoride-Rich Solid-Like Electrolyte Stabilizing Lithium Metal Batteries.

To address the problems associated with Li metal anodes, a fluoride-rich solid-like electrolyte (SLE) that combines the benefits of solid-state and liquid electrolytes is presented. Its unique triflate-group-enhanced frame channels facilitate the formation of a functional inorganic-rich solid electrolyte interphase (SEI), which not only improves the reversibility and interfacial charge transfer of Li anodes but also ensures uniform and compact Li deposition. Furthermore, these triflate groups contribute to the decoupling of Li+ and provide hopping sites for rapid Li+ transport, enabling a high room-temperature ionic conductivity of 1.1 mS cm-1 and a low activation energy of 0.17 eV, making it comparable to conventional liquid electrolytes. Consequently, Li symmetric cells using such SLE achieve extremely stable plating/stripping cycling over 3500 h at 0.5 mA cm-2 and support a high critical current up to 2 mA cm-2. The assembled Li||LiFePO4 solid-like batteries exhibit exceptional cyclability for over 1 year and a half, even outperforming liquid cells. Additionally, high-voltage cylindrical cells and high-capacity pouch cells are demonstrated, corroborating much simpler processibility in battery assembly compared to all-solid-state batteries.

Short-term effectiveness and potential factors of ustekinumab based on real-world data in Chinese psoriasis patients.

BACKGROUND: As one of the most effective biologic treatments for psoriasis, the short-term effectiveness of ustekinumab has yet to be studied extensively. OBJECTIVE: The purpose of this study was to evaluate the short-term effectiveness and potential factors within four weeks after the first-dose ustekinumab treatment based on real-world data. METHODS: The study enrolled 98 patients with moderate-to-severe psoriasis, given ustekinumab 45 mg at week 0, week 4, and then every 12 weeks. Based on clinical data collected at baseline and week 4, we investigated the short-term effectiveness of ustekinumab after the first dose and potential factors associated with the treatment. For evaluation, we collected demographic information, body data, medical history, laboratory examination results, Psoriasis Area and Severity Index (PASI), body surface area (BSA), and dermatology life quality index (DLQI). Response rates were calculated based on the number of patients that achieved a 75/90/100% reduction in PASI (PASI 75/90/100), and the primary treatment goal was to achieve PASI 75. RESULTS: The response rates for PASI 75/90/100 at week 4 were 30.5%, 18.9%, and 16.8%, respectively. For PASI 75, the response rate was higher in patients without metabolic syndrome (MS) (without MS vs. with MS: 36.9% vs. 5.9%, p = 0.013); the serum triglyceride (TG) level was significantly lower in patients achieving PASI 75 (expressed as mean ± standard deviation, achieved vs. unachieved: 1.82 ± 1.79 vs. 3.59 ± 8.89, p = 0.010). For PASI 100, the response rates were higher in female patients (female vs. male: 26.3% vs. 10.5%, p = 0.044) and patients with a family history of psoriasis (with family history vs. without family history: 44.4% vs. 13.9%, p = 0.042). In addition, the possibility of achieving PASI 75/90/100 went up along with the serum high-density lipoprotein cholesterol (HDL-C) level (expressed as adjusted odds ratio < 95% confidence interval>: PASI 75: 28.484 < 2.035-248.419>, p = 0.011; PASI 90: 28.226 < 2.828-281.729>, p = 0.004; PASI 100: 12.175 < 1.876-79.028>, p = 0.009). CONCLUSION: In this study, nearly one-third of patients achieved PASI 75 after only the first-dose ustekinumab treatment. Sex, family history of psoriasis, MS, serum TG level might affect the short-term effectiveness, and serum HDL-C level may be a potential factor. The possibility of achieving treatment goals (PASI 75/90/100) at week 4 increased along with serum HDL-C levels.

Reducing the Surface Tension of Zn Anodes by an Abietic Acid Layer for High Redox Kinetics and Reversibility.

Aqueous zinc batteries are appealing devices for cost-effective and environmentally sustainable energy storage. However, the critical issues of uncontrolled dendrite propagation and side reactions with Zn anodes have hindered their practical applications. Inspired by the functions of the rosin flux in soldering, an abietic acid (ABA) layer is fabricated on the surface of Zn anodes (ABA@Zn). The ABA layer protects the Zn anode from corrosion and the concomitant hydrogen evolution reaction. It also facilitates fast interfacial charge transfer and horizontal growth of the deposited Zn by reducing the surface tension of the Zn anode. Consequently, promoted redox kinetics and reversibility are simultaneously achieved by the ABA@Zn. It demonstrates stable Zn plating/stripping cycling over 5100 h and a high critical current of 8.0 mA cm-2. Moreover, the assembled ABA@Zn|(NH4)2V6O16 full cell delivers outstanding long-term cycling stability with an 89% capacity retention after 3000 cycles. This work provides a straightforward yet effective solution to the key issues of aqueous zinc batteries.

A Case of Primary Cutaneous CD4+ Small/Medium T-Cell Lymphoproliferative Disorder.

Primary cutaneous CD4+ small/medium T-cell lymphoproliferative disorder is indolent clinical behaviour and uncertain malignant potential. Histologically, these lesions show a predominance of small to medium-size CD4+ pleomorphic T-cell expressing follicular helper T-cell markers. We report the case of a 59-year-old female who presented with nodules on the left chest for 3 years. Dermatological examination showed four red nodules localized on the left chest with angiotelectasis without tenderness. The histopathological manifestation was consistent with the diagnosis of primary cutaneous CD4+ small/medium T-cell lymphoproliferative disorder. We focus on the clinical appearance, histopathological features, diagnosis, and differential diagnosis of primary cutaneous CD4+ small/medium T-cell lymphoproliferative disorder.

Model predictive control for constrained robot manipulator visual servoing tuned by reinforcement learning.

For constrained image-based visual servoing (IBVS) of robot manipulators, a model predictive control (MPC) strategy tuned by reinforcement learning (RL) is proposed in this study. First, model predictive control is used to transform the image-based visual servo task into a nonlinear optimization problem while taking system constraints into consideration. In the design of the model predictive controller, a depth-independent visual servo model is presented as the predictive model. Next, a suitable model predictive control objective function weight matrix is trained and obtained by a deep-deterministic-policy-gradient-based (DDPG) RL algorithm. Then, the proposed controller gives the sequential joint signals, so that the robot manipulator can respond to the desired state quickly. Finally, appropriate comparative simulation experiments are developed to illustrate the efficacy and stability of the suggested strategy.

Antimony Potassium Tartrate Stabilizes Wide-Bandgap Perovskites for Inverted 4-T All-Perovskite Tandem Solar Cells with Efficiencies over 26.

Wide-bandgap (WBG) perovskites have been attracting much attention because of their immense potential as a front light-absorber for tandem solar cells. However, WBG perovskite solar cells (PSCs) generally exhibit undesired large open-circuit voltage (VOC) loss due to light-induced phase segregation and severe non-radiative recombination loss. Herein, antimony potassium tartrate (APTA) is added to perovskite precursor as a multifunctional additive that not only coordinates with unbonded lead but also inhibits the migration of halogen in perovskite, which results in suppressed non-radiative recombination, inhibited phase segregation and better band energy alignment. Therefore, a APTA auxiliary WBG PSC with a champion photoelectric conversion efficiency of 20.35% and less hysteresis is presented. They maintain 80% of their initial efficiencies under 100 mW cm-2 white light illumination in nitrogen after 1,000 h. Furthermore, by combining a semi-transparent WBG perovskite front cell with a narrow-bandgap tin-lead PSC, a perovskite/perovskite four-terminal tandem solar cell with an efficiency over 26% is achieved. Our work provides a feasible approach for the fabrication of efficient tandem solar cells.

Perovskite-like Silver Halide Single-Crystal Microbelt Enables Ultrasensitive Flexible X-ray Detectors.

Lead halide perovskite single crystals have attracted wide interest in the field of X-ray detection due to their excellent photophysical properties. However, their inherent toxicity and high thickness restrict their applications in flexible devices. In this paper, designing a micronanometer-scale X-ray detector based on all-inorganic lead-free CsAg2I3 (CAI) single crystal microbelts (MBs) has addressed the above issues. These CAI single crystal MBs can be synthesized on various substrates with high crystal quality and excellent stability. Based on their excellent characteristics of the CAI MBs, we fabricate single CAI MB devices with an Au/CAI/Au structure, which shows not only good ultraviolet photoresponse characteristics, but also excellent X-ray detection performance. The optimized CAI photodetectors exhibit a responsivity of 23.59 mA/W, a high detectivity of 1010 Jones, and a fast response speed. For X-ray detection performance, a sensitivity of up to 515.49 µC Gyair-1 cm-2 and a detection limit of as low as 14.65 µGyair s-1 are achieved with outstanding operation stability and excellent long-term stability. Furthermore, our devices also showed excellent applicability for X-ray imaging, which is promising for their use in X-ray detection and imaging. Finally, flexible X-ray detectors are fabricated by using thin CAI single-crystal MBs and demonstrate good flexibility under different bending radii and bending cycles. Our work shows the potential for developing highly sensitive flexible integrated micro/nano optoelectronic devices by using lead-free perovskite analogue single crystals.

Defect Passivation on Lead-Free CsSnI3 Perovskite Nanowires Enables High-Performance Photodetectors with Ultra-High Stability.

In recent years, Pb-free CsSnI3 perovskite materials with excellent photoelectric properties as well as low toxicity are attracting much attention in photoelectric devices. However, deep level defects in CsSnI3, such as high density of tin vacancies, structural deformation of SnI6- octahedra and oxidation of Sn2+ states, are the major challenge to achieve high-performance CsSnI3-based photoelectric devices with good stability. In this work, defect passivation method is adopted to solve the above issues, and the ultra-stable and high-performance CsSnI3 nanowires (NWs) photodetectors (PDs) are fabricated via incorporating 1-butyl-2,3-dimethylimidazolium chloride salt (BMIMCl) into perovskites. Through materials analysis and theoretical calculations, BMIM+ ions can effectively passivate the Sn-related defects and reduce the dark current of CsSnI3 NW PDs. To further reduce the dark current of the devices, the polymethyl methacrylate is introduced, and finally, the dual passivated CsSnI3 NWPDs show ultra-high performance with an ultra-low dark current of 2 × 10-11 A, a responsivity of up to 0.237 A W-1, a high detectivity of 1.18 × 1012 Jones and a linear dynamic range of 180 dB. Furthermore, the unpackaged devices exhibit ultra-high stability in device performance after 60 days of storage in air (25 °C, 50% humidity), with the device performance remaining above 90%.

Synergistic passivation and stepped-dimensional perovskite analogs enable high-efficiency near-infrared light-emitting diodes.

Formamidinium lead iodide (FAPbI3) perovskites are promising emitters for near-infrared light-emitting diodes. However, their performance is still limited by defect-assisted nonradiative recombination and band offset-induced carrier aggregation at the interface. Herein, we introduce a couple of cadmium salts with acetate or halide anion into the FAPbI3 perovskite precursors to synergistically passivate the material defects and optimize the device band structure. Particularly, the perovskite analogs, containing zero-dimensional formamidinium cadmium iodide, one-dimensional δ-FAPbI3, two-dimensional FA2FAn-1PbnI3n+1, and three-dimensional α-FAPbI3, can be obtained in one pot and play a pivotal and positive role in energy transfer in the formamidinium iodide-rich lead-based perovskite films. As a result, the near-infrared FAPbI3-based devices deliver a maximum external quantum efficiency of 24.1% together with substantially improved operational stability. Combining our findings on defect passivation and energy transfer, we also achieve near-infrared light communication with device twins of light emitting and unprecedented self-driven detection.

Metal- and oxidant-free electrochemically promoted oxidative coupling of amines.

The selective oxidation of amines into imines is a priority research topic in organic synthesis and has attracted much attention over the past few decades. However, the oxidation of amines generally suffers from the drawback of transition-metal, even noble-metal catalysts. Thus, the strategy of metal- and oxidant-free selective synthesis of imines is highly desirable yet largely unmet. This paper unravels a metal-free and external oxidant-free electrochemical strategy for the oxidative coupling methodology of amines. This general transformation is compatible with various functional amines and led to functionalized imines in moderate to satisfactory yields.