Electrically pumped topological laser with valley edge modes.

Quantum cascade lasers are compact, electrically pumped light sources in the technologically important mid-infrared and terahertz region of the electromagnetic spectrum1,2. Recently, the concept of topology3 has been expanded from condensed matter physics into photonics4, giving rise to a new type of lasing5-8 using topologically protected photonic modes that can efficiently bypass corners and defects4. Previous demonstrations of topological lasers have required an external laser source for optical pumping and have operated in the conventional optical frequency regime5-8. Here we demonstrate an electrically pumped terahertz quantum cascade laser based on topologically protected valley edge states9-11. Unlike topological lasers that rely on large-scale features to impart topological protection, our compact design makes use of the valley degree of freedom in photonic crystals10,11, analogous to two-dimensional gapped valleytronic materials12. Lasing with regularly spaced emission peaks occurs in a sharp-cornered triangular cavity, even if perturbations are introduced into the underlying structure, owing to the existence of topologically protected valley edge states that circulate around the cavity without experiencing localization. We probe the properties of the topological lasing modes by adding different outcouplers to the topological cavity. The laser based on valley edge states may open routes to the practical use of topological protection in electrically driven laser sources.

Room-temperature nine-µm-wavelength photodetectors and GHz-frequency heterodyne receivers.

Room-temperature operation is essential for any optoelectronics technology that aims to provide low-cost, compact systems for widespread applications. A recent technological advance in this direction is bolometric detection for thermal imaging, which has achieved relatively high sensitivity and video rates (about 60 hertz) at room temperature. However, owing to thermally induced dark current, room-temperature operation is still a great challenge for semiconductor photodetectors targeting the wavelength band between 8 and 12 micrometres, and all relevant applications, such as imaging, environmental remote sensing and laser-based free-space communication, have been realized at low temperatures. For these devices, high sensitivity and high speed have never been compatible with high-temperature operation. Here we show that a long-wavelength (nine micrometres) infrared quantum-well photodetector fabricated from a metamaterial made of sub-wavelength metallic resonators exhibits strongly enhanced performance with respect to the state of the art up to room temperature. This occurs because the photonic collection area of each resonator is much larger than its electrical area, thus substantially reducing the dark current of the device. Furthermore, we show that our photonic architecture overcomes intrinsic limitations of the material, such as the drop of the electronic drift velocity with temperature, which constrains conventional geometries at cryogenic operation. Finally, the reduced physical area of the device and its increased responsivity allow us to take advantage of the intrinsic high-frequency response of the quantum detector at room temperature. By mixing the frequencies of two quantum-cascade lasers on the detector, which acts as a heterodyne receiver, we have measured a high-frequency signal, above four gigahertz (GHz). Therefore, these wide-band uncooled detectors could benefit technologies such as high-speed (gigabits per second) multichannel coherent data transfer and high-precision molecular spectroscopy.

A Smart Cane Based on 2D LiDAR and RGB-D Camera Sensor-Realizing Navigation and Obstacle Recognition.

In this paper, an intelligent blind guide system based on 2D LiDAR and RGB-D camera sensing is proposed, and the system is mounted on a smart cane. The intelligent guide system relies on 2D LiDAR, an RGB-D camera, IMU, GPS, Jetson nano B01, STM32, and other hardware. The main advantage of the intelligent guide system proposed by us is that the distance between the smart cane and obstacles can be measured by 2D LiDAR based on the cartographer algorithm, thus achieving simultaneous localization and mapping (SLAM). At the same time, through the improved YOLOv5 algorithm, pedestrians, vehicles, pedestrian crosswalks, traffic lights, warning posts, stone piers, tactile paving, and other objects in front of the visually impaired can be quickly and effectively identified. Laser SLAM and improved YOLOv5 obstacle identification tests were carried out inside a teaching building on the campus of Hainan Normal University and on a pedestrian crossing on Longkun South Road in Haikou City, Hainan Province. The results show that the intelligent guide system developed by us can drive the omnidirectional wheels at the bottom of the smart cane and provide the smart cane with a self-leading blind guide function, like a "guide dog", which can effectively guide the visually impaired to avoid obstacles and reach their predetermined destination, and can quickly and effectively identify the obstacles on the way out. The mapping and positioning accuracy of the system's laser SLAM is 1 m ± 7 cm, and the laser SLAM speed of this system is 25~31 FPS, which can realize the short-distance obstacle avoidance and navigation function both in indoor and outdoor environments. The improved YOLOv5 helps to identify 86 types of objects. The recognition rates for pedestrian crosswalks and for vehicles are 84.6% and 71.8%, respectively; the overall recognition rate for 86 types of objects is 61.2%, and the obstacle recognition rate of the intelligent guide system is 25-26 FPS.

Coherent terahertz laser feedback interferometry for hydration sensing in leaves.

The response of terahertz to the presence of water content makes it an ideal analytical tool for hydration monitoring in agricultural applications. This study reports on the feasibility of terahertz sensing for monitoring the hydration level of freshly harvested leaves of Celtis sinensis by employing a imaging platform based on quantum cascade lasers and laser feedback interferometry. The imaging platform produces wide angle high resolution terahertz amplitude and phase images of the leaves at high frame rates allowing monitoring of dynamic water transport and other changes across the whole leaf. The complementary information in the resulting images was fed to a machine learning model aiming to predict relative water content from a single frame. The model was used to predict the change in hydration level over time. Results of the study suggest that the technique could have substantial potential in agricultural applications.

Auto-Calibrated Charge-Sensitive Infrared Phototransistor at 9.3 µm.

Charge-sensitive infrared photo-transistors (CSIP) are quantum detectors of mid-infrared radiation (λ=4 µm-14 µm) which have been reported to have outstanding figures of merit and sensitivities that allow single photon detection. The typical absorbing region of a CSIP consists of an AlxGa1-xAs quantum heterostructure, where a GaAs quantum well, where the absorption takes place, is followed by a triangular barrier with a graded x(Al) composition that connects the quantum well to a source-drain channel. Here, we report a CSIP designed to work for a 9.3 µm wavelength where the Al composition is kept constant and the triangular barrier is replaced by tunnel-coupled quantum wells. This design is thus conceptually closer to quantum cascade detectors (QCDs) which are an established technology for detection in the mid-infrared range. While previously reported structures use metal gratings in order to couple infrared radiation in the absorbing quantum well, here, we employ a 45° wedge facet coupling geometry that allows a simplified and reliable estimation of the incident photon flux Φ in the device. Remarkably, these detectors have an "auto-calibrated" nature, which enables the precise assessment of the photon flux Φ solely by measuring the electrical characteristics and from knowledge of the device geometry. We identify an operation regime where CSIP detectors can be directly compared to other unipolar quantum detectors such as quantum well infrared photodetectors (QWIPs) and QCDs and we estimate the corresponding detector figure of merit under cryogenic conditions. The maximum responsivity R = 720 A/W and a photoconductive gain G~2.7 × 104 were measured, and were an order of magnitude larger than those for QCDs and quantum well infrared photodetectors (QWIPs). We also comment on the benefit of nano-antenna concepts to increase the efficiency of CSIP in the photon-counting regime.

Comparison of Physical and System Factors Impacting Hydration Sensing in Leaves Using Terahertz Time-Domain and Quantum Cascade Laser Feedback Interferometry Imaging.

To reduce the water footprint in agriculture, the recent push toward precision irrigation management has initiated a sharp rise in photonics-based hydration sensing in plants in a non-contact, non-invasive manner. Here, this aspect of sensing was employed in the terahertz (THz) range for mapping liquid water in the plucked leaves of Bambusa vulgaris and Celtis sinensis. Two complementary techniques, broadband THz time-domain spectroscopic imaging and THz quantum cascade laser-based imaging, were utilized. The resulting hydration maps capture the spatial variations within the leaves as well as the hydration dynamics in various time scales. Although both techniques employed raster scanning to acquire the THz image, the results provide very distinct and different information. Terahertz time-domain spectroscopy provides rich spectral and phase information detailing the dehydration effects on the leaf structure, while THz quantum cascade laser-based laser feedback interferometry gives insight into the fast dynamic variation in dehydration patterns.

Absorption Engineering in an Ultrasubwavelength Quantum System.

Many photonic and plasmonic structures have been proposed to achieve ultrasubwavelength light confinement across the electromagnetic spectrum. Notwithstanding this effort, however, the efficient funneling of external radiation into nanoscale volumes remains problematic. Here, we demonstrate a photonic concept that fulfills the seemingly incompatible requirements for both strong electromagnetic confinement and impedance matching to free space. Our architecture consists of antenna-coupled meta-atom resonators that funnel up to 90% of the incident radiation into an ultrasubwavelength semiconductor quantum well absorber of volume V = λ310-6. A significant fraction of the coupled electromagnetic energy is used to excite the electronic transitions in the quantum well, with a photon absorption efficiency 550 times larger than the intrinsic value of the electronic dipole. This system opens important perspectives for ultralow dark current quantum detectors and for the study of light-matter interaction in the extreme regimes of electronic and photonic confinement.

Quasi-static and propagating modes in three-dimensional THz circuits.

We provide an analysis of the electromagnetic modes of three-dimensional metamaterial resonators in the THz frequency range. The fundamental resonance of the structures is fully described by an analytical circuit model, which not only reproduces the resonant frequencies but also the coupling of the metamaterial with an incident THz radiation. We also demonstrate the contribution of the propagation effects, and show how they can be reduced by design. In the optimized design, the electric field energy is lumped into ultra-subwavelength (λ/100) capacitors, where we insert a semiconductor absorber based on the collective electronic excitation in a two dimensional electron gas. The optimized electric field confinement is exhibited by the observation of the ultra-strong light-matter coupling regime, and opens many possible applications for these structures in detectors, modulators and sources of THz radiation.

Modeling and improving the output power of terahertz master-oscillator power-amplifier quantum cascade lasers.

A model based on carrier rate equations is proposed to evaluate the gain saturation and predict the dependence of the output power of a terahertz master-oscillator power-amplifier quantum cascade laser (THz-MOPA-QCL) on the material and structure parameters. The model reveals the design rules of the preamplifier and the power extractor to maximize the output power and the wall-plug efficiency. The correction of the model is verified by its agreement with the experiment results. The optimized MOPA devices exhibit single-mode emission at ∼ 2.6 THz with a side mode suppression ratio of 23 dB, a pulsed output power of 153 mW, a wall-plug efficiency of 0.22%, and a low divergence angle of ∼6°×16°, all measured at an operation temperature of 77 K. The model developed here is helpful for the design of MOPA devices and semiconductor optical amplifiers, in which the active region is based on intersubband transitions.

Photoconductive arrays on insulating substrates for high-field terahertz generation.

We report on the design, fabrication and characterisation of large-area photoconductive THz array structures, consisting of a thin LT-GaAs active region transferred to an insulating substrate using a wafer-scale bonding process. The electrically insulating, transparent substrate reduces the parasitic currents in the devices, allowing peak THz-fields as high as 120 kV cm-1 to be generated over a bandwidth >5 THz. These results are achieved using lower pulse energies than demanded by conventional photoconductive arrays and other popular methods of generating high-field THz radiation. Two device sizes are fully characterised and the emission properties are compared to generation by optical rectification in ZnTe. The device can be operated in an optically saturated regime in order to suppress laser noise.

MiR-381-3p suppresses biological characteristics of cancer in head-neck squamous cell carcinoma cells by targeting nuclear autoantigenic sperm protein (NASP).

MiR-381-3p and nuclear autoantigenic sperm protein (NASP) have regulatory functions in tumors. Whether NASP is targeted by miR-381-3p to influence biological characteristics of cancer in head-neck squamous cell carcinoma (HNSCC) cells was investigated. StarBase (version 3.0) found that the expression of NASP was increased with the down-regulation of miR-381-3p in laryngocarcinoma tissue, AMC-HN-3，FaDu，HNE-3，and Detroit 562 cell lines. MiR-381-3p could target NASP, reduce the expression of MMP-2 and MMP-9, Vimentin, repress the cell viability, invasion, and migration, and promote the expression of E-cadherin in AMC-HN-3 cells. Overexpressed NASP could increase the viability, migration and invasion rates in AMC-HN-3 cells, which could be partially reversed by overexpressed miR-381-3p. Thus, miR-381-3p targeted and suppressed NASP gene, reduced the viability, migration, invasion, EMT of HNSCC cells, demonstrating that miR-381-3p has the potential to be a therapeutic target in inhibiting the progression of HNSCC.

Tunable and compact dispersion compensation of broadband THz quantum cascade laser frequency combs.

Miniaturized frequency combs (FCs) can be self-generated at terahertz (THz) frequencies through four-wave mixing in the cavity of a quantum cascade laser (QCL). To date, however, stable comb operation is only observed over a small operational current range in which the bias-depended chromatic dispersion is compensated. As most dispersion compensation techniques in the THz range are not tunable, this limits the spectral coverage of the comb and the emitted output power, restricting potential applications in, for example, metrology and ultrashort THz pulse generation. Here, we demonstrate an alternative architecture that provides a tunable, lithographically independent, control of the free-running coherence properties of THz QCL FCs. This is achieved by integrating an on-chip tightly coupled mirror with the QCL cavity, providing an external cavity and hence a tunable Gires Tournois interferometer (GTI). By finely adjusting the gap between the GTI and the back-facet of an ultra-broadband, high dynamic range QCL, we attain wide dispersion compensation regions, where stable and narrow (~3 kHz linewidth) single beatnotes extend over an operation range that is significantly larger than that of dispersion-dominated bare laser cavity counterparts. Significant reduction of the phase noise is registered over the whole QCL spectral bandwidth (1.35 THz). This agile accommodation of a tunable dispersion compensator will help enable uptake of QCL-combs for metrological, spectroscopic and quantum technology-oriented applications.

Coherent imaging using laser feedback interferometry with pulsed-mode terahertz quantum cascade lasers.

We report a coherent terahertz (THz) imaging system that utilises a quantum cascade laser (QCL) operating in pulsed-mode as both the source and detector. The realisation of a short-pulsed THz QCL feedback interferometer permits both high peak powers and improved thermal efficiency, which enables the cryogen-free operation of the system. In this work, we demonstrated pulsed-mode swept-frequency laser feedback interferometry experimentally. Our interferometric detection scheme not only permits the simultaneous creation of both amplitude and phase images, but inherently suppresses unwanted background radiation. We demonstrate that the proposed system utilising microsecond pulses has the potential to achieve 0.25 mega-pixel per second acquisition rates, paving the pathway to video frame rate THz imaging.

Ultrafast two-dimensional field spectroscopy of terahertz intersubband saturable absorbers.

Intersubband (ISB) transitions in semiconductor multi-quantum well (MQW) structures are promising candidates for the development of saturable absorbers at terahertz (THz) frequencies. Here, we exploit amplitude and phase-resolved two-dimensional (2D) THz spectroscopy on the sub-cycle time scale to observe directly the saturation dynamics and coherent control of ISB transitions in a metal-insulator MQW structure. Clear signatures of incoherent pump-probe and coherent four-wave mixing signals are recorded as a function of the peak electric field of the single-cycle THz pulses. All nonlinear signals reach a pronounced maximum for a THz electric field amplitude of 11 kV/cm and decrease for higher fields. We demonstrate that this behavior is a fingerprint of THz-driven carrier-wave Rabi flopping. A numerical solution of the Maxwell-Bloch equations reproduces our experimental findings quantitatively and traces the trajectory of the Bloch vector. This microscopic model allows us to design tailored MQW structures with optimized dynamical properties for saturable absorbers that could be used in future compact semiconductor-based single-cycle THz sources.

Optomechanical response with nanometer resolution in the self-mixing signal of a terahertz quantum cascade laser.

Owing to their intrinsic stability against optical feedback (OF), quantum cascade lasers (QCLs) represent a uniquely versatile source to further improve self-mixing interferometry at mid-infrared and terahertz (THz) frequencies. Here, we show the feasibility of detecting with nanometer precision, the deeply subwavelength ($ \lt \lambda /6000 $<λ/6000) mechanical vibrations of a suspended $ {{\rm Si}_3}{{\rm N}_4} $Si3N4 membrane used as the external element of a THz QCL feedback interferometer. Besides representing an extension of the applicability of vibrometric characterization at THz frequencies, our system can be exploited for the realization of optomechanical applications, such as dynamical switching between different OF regimes and a still-lacking THz master-slave configuration.

Phase-resolved terahertz self-detection near-field microscopy.

At terahertz (THz) frequencies, scattering-type scanning near-field optical microscopy (s-SNOM) based on continuous wave sources mostly relies on cryogenic and bulky detectors, which represents a major constraint for its practical application. Here, we devise a THz s-SNOM system that provides both amplitude and phase contrast and achieves nanoscale (60-70nm) in-plane spatial resolution. It features a quantum cascade laser that simultaneously emits THz frequency light and senses the backscattered optical field through a voltage modulation induced inherently through the self-mixing technique. We demonstrate its performance by probing a phonon-polariton-resonant CsBr crystal and doped black phosphorus flakes.

Terahertz master-oscillator power-amplifier quantum cascade laser with a grating coupler of extremely low reflectivity.

A terahertz master-oscillation power-amplifier quantum cascade laser (THz-MOPA-QCL) is demonstrated where a grating coupler is employed to efficiently extract the THz radiation. By maximizing the group velocity and eliminating the scattering of THz wave in the grating coupler, the residue reflectivity is reduced down to the order of 10-3. A buried DFB grating and a tapered preamplifier are proposed to improve the seed power and to reduce the gain saturation, respectively. The THz-MOPA-QCL exhibits single-mode emission, a single-lobed beam with a narrow divergence angle of 18° × 16°, and a pulsed output power of 136 mW at 20 K, which is 36 times that of a second-order DFB laser from the same material.

Gas spectroscopy with integrated frequency monitoring through self-mixing in a terahertz quantum-cascade laser.

We demonstrate a gas spectroscopy technique, using self-mixing in a 3.4 terahertz quantum-cascade laser (QCL). All previous QCL spectroscopy techniques have required additional terahertz instrumentation (detectors, mixers, or spectrometers) for system pre-calibration or spectral analysis. By contrast, our system self-calibrates the laser frequency (i.e., with no external instrumentation) to a precision of 630 MHz (0.02%) by analyzing QCL voltage perturbations in response to optical feedback within a 0-800 mm round-trip delay line. We demonstrate methanol spectroscopy by introducing a gas cell into the feedback path and show that a limiting absorption coefficient of ∼1×10-4 cm-1 is resolvable.

The identification of induction chemo-sensitivity genes of laryngeal squamous cell carcinoma and their clinical utilization.

PURPOSE: To identify potential molecular markers for induction chemotherapy of Laryngeal squamous cell carcinoma (LSCC). METHODS: Differently expressed genes between chemo-sensitive group (seven cases) and chemo-insensitive (five cases) group after induction chemotherapy by TPF were identified by microarrays. Bayes network and Random forest analyses were employed to identify core genes for induction chemotherapy. The diagnostic value of these core genes was also evaluated by ROC analysis. RESULTS: Six genes (SPP1, FOLR3, KYNU, LOC653219, ADH7 and XAGE1A) are highly expressed, while seven gene (CADM1, NDUFA4L2, CCND2, RARRES3, ERAP2, LYD6 and CNTNAP2) present significantly low expression. Among these genes, genes CADM1, FOLR3, KYNU, and CNTNAP2 are core candidates for LSCC chemo-sensitivity. And that the low expression of CADM1 may result in chemo-sensitivity, which leads to high expression of gene FOLR3 and KYNU, and low expression of gene CNTNAP2. Besides, ROC analysis shows that these four genes exhibit effective diagnostic value for induction chemo-sensitivity. CONCLUSIONS: CADM1 may be a potential molecular marker for LSCC induction chemotherapy, while CADM1, FOLR3, KYNU, and CNTNAP2 may provide essential guidance for LSCC diagnosis and follow-up treatment strategies.

On-Chip Terahertz-Frequency Measurements of Liquids.

Terahertz-frequency-range measurements can offer potential insight into the picosecond dynamics, and therefore function, of many chemical systems. There is a need to develop technologies capable of performing such measurements in aqueous and polar environments, particularly when it is necessary to maintain the full functionality of biological samples. In this study, we present a proof-of-concept technology comprising an on-chip planar Goubau line, integrated with a microfluidic channel, which is capable of low-loss, terahertz-frequency-range spectroscopic measurements of liquids. We also introduce a mathematical model that accounts for changes in the electric field distribution around the waveguide, allowing accurate, frequency-dependent liquid parameters to be extracted. We demonstrate the sensitivity of this technique by measuring a homologous alcohol series across the 0.1-0.8 THz frequency range.